Activating form, it asks for ADS user-pass
Hello,
We need some help. When we try to activate a form form SFP transaction, SAP asks for user and password in AdobeDocumentServices/Config resource.
Do we need to know this credentials? Is it the common behaviour when activating a form from this transaction?
Please, could you help us?
Thanks in advance
Hey guys i have solved it!! Just right click the installation file and click run as administrator. It will install properly
Similar Messages
-
I have successfully restored my iPhone 3 gs( Ios ) by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with other SIM card like Zong etc but the response was same i.e; no SIM card is inserted. It not catching the signals. I am trying to use my wifi to activate my iphone but it iss not processing then i used itunes to activate by it's again saying that no sim card is detected.
My all contacts and all data is in this mobile. Now Iam unable to contact anyone. Please help me. How can I sort it out?
Thank you
Regards
Wazir AliWell, if you did it yourself, then there is a chance that you damaged some other component inside the device that is causing your issue. The iPhone's are not user serviceable, and once you have opened the device you have voided any warranty and post-warranty support from Apple. I would try Google to see if you can find any other way to repair your device, as Apple will no longer look at it.
-
Downloading apps it asks for apple ID Pass then it says "verification required". Then says Security Code required. Doesn't accept code. itunes doesn't accept code from visa card either?Please Help
If it is trying to verify your payment info, I would be willing to guess that it is looking for the security code for your credit card. Did you credit card just get replaced lately or the expiration date change? When is the last time that you updated your payment information in iTunes?
-
Hi I’m Mohammed abwane from Saudi Arabia. I purchased my me I phone 5 last march 2013. One week ago I try to restore this phone but when I arrive to activation point, this ask for apple Id and password. Unfortunately I forget the password and email I used for opening my account.
Then I send it to the suppler where purchased this phone they told me there is no way to fix this unless I give them the Id and password .know I don’t know where I can go because in my Location nobody know how to fix this problem.
At less I don’t know what I can do to fix this problem because I use this phone for my work and All my data and phone number in side this phone
Notes :- I have all the document ( invoice and box for this phone )which say that I phone for me .
I hope to get any answer from your good site other whys this phone will be useless for me
Thanks .
<Email Edited By Host>If you can't remember your apple id or password then sadly that phone has been bricked, without that infomation te activation lock cannot be removed by apple or anyone else.
-
Trying to install Leopard on my iMac (G5). Got to the screen that asks for the user name and password and it won't take it. How do I get out of this and resume the software install?
Help here > Mac OS X: Changing or resetting an account password
-
I want to download the new updates I think to the 10.9 but our mac was given to us and when it comes to the last page it asks for the user name and password but this mac was wiped clean. How do I find out this info so I can get iPhoto? To be honest I'm not even sure what type of Mac I have and don't know how to find out what kind it is
I'd also like to make address labels and don't know where to find that eitherYou would make address lables with the Contacts app.
If you don't have the user name and password used to set up the machine then you need to purchase the apps for yourself. -
I have a HP Pavilion 15-p028TX NB PC ALL unable go windows asking for power on pass word .
I have a HP Pavilion 15-p028TX NB PC ALL unable go windows asking for power on pass word . It says system disabled 55541760 after 3 failed attempts. Please Help!
This question was solved.
View Solution.Hi,
Enter: 40429366
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
8320 with a problem with BES activation. Phone asking for Activation Server address.
I have a remote user, whose BB 8320 is asking for am Activation Server address. I looked thru the forms and the KB and the only two suggestion are use the servers SMTP address or leave blank neither have worked. The user wiped the blackberry before trying to activate. The phone was using BIS prior to today, she had t-mobile change her to their Corp/BES plan.
Help please.....
I am going to cross post in the Blackberry Professional software forum.. SorryHello black jack 1986,
For troubleshooting information on this, take a look at this article:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/ts3424
Since the update or restore did not complete you may also want to look at:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
Hope this helps,
Mario -
Folder created in System form and disabled for some users.
Hi,
I have created a folder in Inventory data form and work well for every users who have professional licence with R/W permission for that form. If a user with CRM licence access the Inventory data form, he see my folder disabled.
If I put these users in R/W, all is OK : everyone can access my folder. But, I won't let it like this... If I won't grant R/W access to everyone and get back to R only, I will loose that property.
Q: How to make that folder activated for all users what ever the licence he has ?
Thank you.
Edited by: Kevin Bedard on Oct 29, 2008 4:37 PMHI,
The crm user has only R rigths in the license. I think the form is only in view mode (check the form mode from debug)
Even the form is in OK mode, not view mode:
Try:
1. get the form_activate event
2. Enable the folder even it is disabled.
Regards,
J. -
How to disable dialogue box asking for exchange user/psswd
Everytime a particular user sends me an email, just by clicking on that email or opening it, I get this annoying pop up dialogue box asking for name and password.
It looks like an exchange server thats connected to the users account and has nothing to do with my email account. I don't use exchange.
I have to hit cancel 3X and then it automatically prompts me every few seconds.Solved.
It was because the folder was from time machine backup that I just dragged and dropped to desktop. -
Printer is asking for an user acces code instead of windows login and password?
I have been seeing the HP printers asking(LaserJet M4555 MFP, LaserJet 500 color MFP M575 etc) for user access code instead of windows login and password.
One thing i have noticed is that when this happens there is a slight change in the EWS page configuration at security -> access control.The device administrator tabe is unchecked as you can see below ehen this happens
Have tried cold resetting the printer and restore facory settings but this does not works and some thimes it does works for a while but the issue is returing back.
We do not need this access code promt instead we need the usual windows login and password that used be there originally.
alsothis is how the settings look like after a cold reset somtimes when it does not asks for user access code , the problem is cold rese does lways works and it reverts back ois original settings@munish259272
Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP -
What is the best app for filling in forms on iPad for business users
Hi all, Ive been researching this for my own organisation for a few months are trialled a lot of different approaches. We run many remote engineers and have an issue getting job sheets back on which we invoice clients. If they dont make it back we lose money and sadly many dont make it back!
Our requirements went a little like this:
1. We didn't want to "rebuild" our forms again in some software. We have them already in word and excel formats.
2. We wanted the option of letting my users input to the form using EITHER normal handwriting or keyboard.
3. We needed no complexity in terms of installing software and on that note needed an easy in/out type of contract.
4. We wanted to capture GPS and some photos with the form and send them all together. (currently we take photos with the phone and they email them back but tying them up to forms is a nightmare)
5. We needed to have data extraction so we could report on key data.
6. We have a resource light IT dept so we needed something quick and easy to use - VERY easy.
7. We wanted no surprises with costs etc.
I looked at 8 that claimed the same - "set up forms quickly, grab data etc". Some were cheap apps where everything is done on the iPad but they just didnt work for what we need. We needed some control at the IT dept level for version control etc. Some were also VERY complex and needed a degree to use them! We dont have an in house form design team, we just have forms we knocked up in Word. We quickly found we needed a full service and an app on the device that synched with the service. This left us to "manage" the forms and give the users access to a library.
This narrowed it down to 3 solutions but two didnt do the handwriting part so in the end we chose a SaaS service from www.naturalformscloud.com. Ive just completed the free 30 day free trial with FULL features (unlike others i tried) and about to sign up but thought id reach out first. Theres NO hidden extras like storage, or price per submission which enables me to forecast budget accurately. For €15 per user per month I can create as many forms and send as much as i want. Heres the rub - i have my forms already in word and excel format. All I do is save them as a PDF and upload them to the system. If i want handwriting recognition i set the fields up that i want and publish it to tablets in literally a few minutes. When users tap in to a field on the form they are given either a keyboard or a handwriting panel. if they write in the panel with their finger or stylus they see the written word but in the field it converts VERY accurately to the data word. In this way they kind of validate the data when entering it but they know how to write so form filling is actually faster than keyboard for some. We get signatures, photos, GPS, voice recordings, XML, PDF and CSV outputs within seconds of the form being sent by the user.
Theres an app to install on the tablet called naturalforms enterprise but sync is quick and easy. the tablet app has some good features too. All in all im VERY happy with what we are about to subscribe to based on our criteria and the need for speed! Interested to hear from anyone else on this ? www.naturalformscloud.com theres a youtube video on the web site which is quite funky.
cheers
MikeI have the same question, but I want to qualify it with a few things. First, Contacts works great, but I want to keep my business contacts and my personal contacts separate. I know you can separate them in Contacts, however, as an executive assistant I also have my bosses contacts and frankly they are a mess.
I am looking for a separate app that I use just for work. I need to link 5 accounts to this app. 2 will be from Exchange and 3 will be from Gmail. As a bonus I would be thrilled if the app could merge profiles and link to facebook, twitter, and linkedin. Any advice? -
Trouble with forms not fuctioning for Mac users
I have created a form in LC Designer that works great on PC, but doesn't work on on Mac. Or rather doesn't work on all Mac machines. I have tested the form on two different Mac machines in my office and it seems to work fine. However, those outside the office are not able to save the completed form or allow the user to use the email submit button. Is there something I can do to make this user-friendly for Mac users?
The email button function is the least of the issues. The fonts and type size are altered, parts of the form drop out and the form fields appear to be blank until you click on them. Upon click the information then appears. It's really very odd.
Additionally, they can not save the form to their desktop. I thought that this was me forgetting to enable user rights, but that was not the case. At the moment, Mac users can only print the form and fax it.
Thanks,
CHC -
Form is asking for do you want to save the changes made in the query mode
hi all,
according to my previous thread {thread:updating the nondatabase column}
i have set the lockrecord to yes for the non_db_field but when i query the form with help of f8 and try to close it with out any changes then too its asking for the commit.
how can i solve this issue.
Thanks..
Edited by: user13329002 on Dec 30, 2010 12:41 AMHello
Yes, i do agree with Ahmed
pls check the POST-QUERY TRIGGER < ---- This is the KEY-Problem
Trace which item causes the problem almost it's a db item was formaly returned from LOV and it is re-assigned in the POST-QUERY Trigger .
SO , changes in the db occured changes the status of the form.
most propaply it's a retrieved fk in ur post Query,also avoid using reserved words in ur display items as
TYPE ,NAME ,etc.
ITEM_ID ,ITEM_NAME -- reserved word for java and related staff ...pls check list of oracle reserved words
hope this helps solving ur problem...
Regards,
Abdetu... -
Organizational Forms Library FORM LOAD FAILS for one user
I have a user who is unable to pull up any of the forms listed in the Organizational Forms Library under the Developer Tab within Outlook
2010. Any other person on the same PC has no issues with the same thing. The user in question does not have any issues pulling up the same forms on any other PC.
I suspect it was a profile issue so I logged in as admin then deleted the outlook folder under C:\Users\username\AppData\Local\Microsoft\Outlook
for the user in question.
Then logged back in as the user and let Outlook recreate the profile again. Still no go with being able to pull a form up.
Any suggestions?
Is there a registry key I should be playing with?Hi,
Did the user get any error message?
Outlook 2010 caches the names of the forms in the Exchange Organizational Forms Library. The cache expires every 24 hours. If a new form in the Organizational Forms Library has not been cached, Outlook displays an error. Please try to use the following
registry to lower the timeout or disable it and then check the issue again.
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Forms\ClassNamesCache
DWORD: Timeout
Decimal Value (in hours): 1 - 24
DWORD: Disabled
Value: 1
For more information, please refer:
http://www.slipstick.com/exchange/2010-exs/organizational-forms-library-exchange-2010/
Regards,
Steve Fan
TechNet Community Support
Maybe you are looking for
-
Calling servlet problem in iPlanet web server.
Hello, friends. I have installed iPlanet web server 6.0. After installation I am using the default virtual server only. Thus, for all testing pages also, I use the default Document Root only (C:\iplanet\servers\docs\testsite) (I think, here "docs" is
-
Ship-to party wise Bill to party display any standard report?
Any one know Ship-to party wise Bill to party display any standard report? Thanks in Advance. Shailendra
-
Dears: I am working as the basis administrator, but recently i need to handle the maintainence of the CRM system, i have no idea how to use this system, such as EP,ITS,ICSS and so on. Do you have any materials to can make me know how to manage this s
-
Is airport extreme worth the money@
thinking of buying airport extreme, can i connect wirelessly to any speakers like i-trip does? Want to hook up whole house, pretty basic post but help would be great to a novice like me
-
I'm a professional Logic Pro user (12 hours a day). I'd like to say a few things about the new version 9. Its amazing. Does almost everything it's competition does. The new flex tool will speed up editing tremendously, and the guitar amps sound great