Activation - follow-up question to sjpt.

I did as you suggested to deactivate my computer's regisistration, which was accomplished. When I then tried to re-activate I got this error message: "The vendor account you entered (Adobe ID - pre-entered with no option to chahge) is not associated with the item you are trying to open."  By tre way, the item I am trying to open and transfer to my Nook is an epub book from my local public library.
Thanks for your effort to help me.

What steps are you taking exactly?
I would usually expect to do the re-activation first, not associated with any book, using menu/Help/Authorize Computer (menu/Library/Authorize Computer on v1.72)
And then to access the book once the reactivation had happened.
In that case, the reactivation would not be associated with any book and the message you quote would not make sense.
Unfortunately, many ADE messages are incomprehensible,
and there are quite a few circumstances where the messages are quite comprehensible but don't actually say what they mean.
One possible solution .... I'm not at all sure if will help, but it has helped a lot of people in very varied situations.
There are lots of bugs in ADE2.0 (and 2.0.1).  Try replacing ADE2.0 with the older but more reliable v1.7.2.
(You can have them both installed at once if you like.)
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172

Similar Messages

  • Follow up question about image not looking good in canvas-Shane?

    I guess this is a follow up question for Shane....
    You wrote this in response to someone a year ago which helped me out.
    Shane's Stock Answer #49 - Why is the quality different between what I see in the Viewer and what I see in the Canvas?
    Well... the viewer is just that-- a viewer. It will display anything that fcp will recognize as usable video or graphics. The canvas is a viewer too, but at the pixel dimension specified by the settings of your project and sequence.
    For example, if your graphic or footage is much higher resolution than your 720x480 DV sequence, FCP is interpolating down your file to fit the settings of the sequence. Usually this makes it look not so hot. DV is a 5:1 compression working with a 4:1:1 color depth. Your pristine picture images and graphics are being crushed.
    Same with picture files. HIgh res pics now adopt the sequence settings and will render to those specs, and most likely they are not as high quality.
    So, based on your answer, I made an HDV sequence, dropped my DVCPro50-NTSC footage and my tiffs into the sequence and now the stills look great. Is this an okay workaround or do you have another suggestion? I'm worried about this HD sequence taking too long to make a compressed QT from in the end.
    Thanks!

    Photo JPEG is a good option.  But this all depends on what your final output will be.  If you are going to make a DVD, then that is SD, so using an HD sequence setting makes no sense.  Photo JPEG is good, but not realtime in FCP.  DV50 or ProRes NTSC are good options.
    Unless you are making an HD master...in which case ProRes 422 for HD is good

  • View follow up questions in Q&A pod in a threaded or some other related view

    Currently when a question is answered it will be linked to the question. We sometimes have participants requiring further information about the same question, but Adobe Connect does not seem to allow participants to click the response and add follow up questions. As a presenter you can click on answered questions and add more but participants always have to submit new unlinked questions. Is there a way for participants to ask follow up questions in Q&A pod so that they are threaded to their original question?

    Currently when a question is answered it will be linked to the question. We sometimes have participants requiring further information about the same question, but Adobe Connect does not seem to allow participants to click the response and add follow up questions. As a presenter you can click on answered questions and add more but participants always have to submit new unlinked questions. Is there a way for participants to ask follow up questions in Q&A pod so that they are threaded to their original question?

  • IMovie and external hard drive: follow up question

    This is a follow up question from the iMovie 6 forum. Hopefully, this question will help the poster on that forum as well. I, too, am working on multiple iMovie 5.0.2 projects at the same time and am running out of hard disk space. I would like to transfer remaining miniDV tape to an external hard drive and, when finished, transfer these clips from the external hard drive to the current iMovie project in my Powerbook, one project at a time. Is this possible ? Will I transfer files from the external hard drive to the Powerbook hard drive and then to iMovie, or directly from the external hard drive to iMovie ? Do I have to format the external drive to Mac OS Extended as advised in iMovie 6 forum in order to transfer miniDV tape to the external hard drive ? When pressing the erase tab to format the external hard drive, will this erase files already on the hard drive before formatting ? Can I transfer projects I am not working on from iMovie to the external hard drive and then transfer them back to the Powerbook when it is time to work on them ? Sorry about all the questions but I need to think very simple-minded when it comes to computer related issues. Thanks for your help.

    I was able to use and store iMovie in the external hard drive using my Powerbook as a monitor, so I presume it is formatted correctly
    Sorry, but you cannot assume the drive is formatted correctly. iMovie doesn't tell you the drive format is incompatible with iMovie. (it should, but it doesn't.) Some iMovie project features can be saved and some cannot.
    It's easy to check the disk format. In the Finder, click on the drive icon and choose File > Get Info from the Finder menubar. The window that opens shows the disk Format. You want it to say "Mac OS Extended". "(Journaled)" is optional.
    With some drives, sometimes even that can be wrong. To be sure, use Disk Utility to check the format. When you click on the drive in the list along the left side of the Disk Utility window, the format is displayed at the bottom of the window.
    Always, always, always check the disk format before using a drive with iMovie.
    Karl

  • Follow up question...

    I just purchased a Airport Extreme from the Apple Store yesterday. I purchased it to extend/share my iPhone 5 hotspot. I have figured out how to have AEBS join my hotspot, but it does not seem to have access on the Ethernet ports in the back?? This is my needed feature, unfortunately I live in an area that only offers DSL and only 2.5mbps.. .  Using my phone I'm able to receive 10-20mbps on LTE/4G, and fortunately for me I have unlimited data on my hotspot. So I'm set for the wireless devices in my home, but struggling getting wired devices working....
    Any help will be greatly appreciated!
    Thanks,
    Tim
    Info
    iPhone 5 iOS 7.0.4
    Windows 8
    Linux Ubuntu 12.10
    Airport Extreme Base Station, iOS 7.0.4
    This solved my question by Bob Timmons  on Nov 28, 2013 3:33 PM
    No, only the AirPort Express. There are 2 Ethernet ports on the Express. If you need more, you can add an Ethernet switch.
    The Express has a special feature called ProxySTA that allows it to join a network and the Ethernet ports will be enabled when it does this.
    Might be fun to ask one of the sales guys what exactly ProxySTA is and what it does before you explain it to them. Even the "genius" may not know.
    See the answer in context
    Follow Up Question----
    I asked the apple salesperson about proxySTA, first I got a blank stare then, some nonsense to attempt they knew what it was.
    So I picked up the Express, set it up to join my hotspot and it works really well!!! The only problem is the hotspot only allows five connections. The express eats one, that only leaves four! Is there another way to set up the express so it can handle the dhcp so my hotspot only sees the one connection to the express??
    Thanks,
    Tim

    Now please perform a hard reset on the second Express by holding in the reset button for 10 seconds, then release. Allow a full minute for the Express to restart to a slow, blinking amber light.
    Make sure that the Ethernet connection from the first "joining" Express goes to the WAN "O" port on the second Express creating a wireless network.
    Don't worry about the Double NAT message for now, just make sure that you can now log on to the Internet through the second Express wireless network.
    You may need to power off both Express devices and restart the "joining" Express first, then start up the "creating" Express.
    Once you verify that everything is working, you can go back in using AirPort Utillty and click to ignore the Double NAT so that a green light will be displayed on the second Express.

  • Follow-up question on ZXM08U16 table E_TDRSEG  (function group XM08)

    Rich's suggestion worked (on how to retype the E_TDRSEG table received from MIRO by include ZXM08U16 in the function group XM08.
    Before asking my new follow-up question, let me recap the original SAP typing of this table and the way I've retyped it (following Rich's instructions):
    The original SAP typing is:
    E_TDRSEG TYPE  MMCR_TDRSEG
    TYPES: mmcr_tdrseg TYPE mmcr_drseg OCCURS 0,
    TYPES: BEGIN OF mmcr_drseg_co.
            INCLUDE STRUCTURE cobl_mrm_d.
    TYPES: cr LIKE drseg_cr    OCCURS 0,
           unpl_refwr TYPE refwr,
           END OF mmcr_drseg_co.
    TYPES: BEGIN OF mmcr_drseg.
            INCLUDE STRUCTURE drseg.
    TYPES: cr LIKE drseg_cr OCCURS 0,
           co TYPE mmcr_drseg_co OCCURS 0,
           sm LIKE drseg_sm OCCURS 0,
           charact TYPE rbcharact_instance OCCURS 3,
                                           "instances of characteristics
           uebgmat  TYPE matnr,
           uebrblgp TYPE rblgp,
           selkz_db TYPE selkz,
           rblgp_old TYPE rblgp,           "rblgp before aggregation
           END OF mmcr_drseg.
    I retyped this as follows:
    TYPES:
      ty_cobl_mrm_d        TYPE cobl_mrm_d,
      ty_drseg_cr          TYPE STANDARD TABLE OF drseg_cr with DEFAULT KEY,
      ty_drseg_sm          TYPE STANDARD TABLE OF drseg_sm with DEFAULT KEY,
      ty_charact           TYPE STANDARD TABLE OF rbcharact_instance with DEFAULT KEY,
      BEGIN OF ty_mmcr_drseg_co.
        INCLUDE            TYPE ty_cobl_mrm_d.
        TYPES:
          cr               TYPE ty_drseg_cr ,
          unpl_refwr       TYPE refwr,
      END OF   ty_mmcr_drseg_co,
      ty_co                TYPE STANDARD TABLE OF ty_mmcr_drseg_co
                           WITH DEFAULT KEY,
      BEGIN OF ty_mmcr_drseg.
        INCLUDE            TYPE drseg.
        TYPES:
          cr               TYPE ty_drseg_cr,
          co               TYPE ty_co,
          sm               TYPE ty_drseg_sm,
          charact          TYPE ty_charact,        "instances of characteristics
          uebgmat          TYPE matnr,
          uebrblgp         TYPE rblgp,
          selkz_db         TYPE selkz,
          rblgp_old        TYPE rblgp,             "rblgp before aggregation
      END OF   ty_mmcr_drseg.
      DATA:
        x_mmcr_drseg       TYPE mmcr_drseg,
        x_mmcr_drseg_oo    TYPE ty_mmcr_drseg,
        it_mmcr_drseg      TYPE STANDARD TABLE OF ty_mmcr_drseg,
        x_drseg_cr         TYPE drseg_cr,
        x_drseg_sm         TYPE drseg_sm,
        x_drseg_co         TYPE ty_mmcr_drseg_co.
    But here's my question.  To load the new table from the SAP table, I've had to use the code below.  Is there any way to simplify this code?  (I don't think there is because the drseg structure is included in the old and the new, so you can't simply say new-drseg = old-drseg.  But maybe there's another way to do it and I'm not seeing it.  Also, note that I had to loop on each of  the inner three tables because it wouldn't compile when I tried statements of the form "new-table[] = old-table[].)
      LOOP AT e_tdrseg INTO x_mmcr_drseg.
        x_mmcr_drseg_oo-anln1     = x_mmcr_drseg-anln1.
        x_mmcr_drseg_oo-anln2     = x_mmcr_drseg-anln2.
        x_mmcr_drseg_oo-aplzl     = x_mmcr_drseg-aplzl.
        x_mmcr_drseg_oo-arewr     = x_mmcr_drseg-arewr.
        x_mmcr_drseg_oo-areww     = x_mmcr_drseg-areww.
        x_mmcr_drseg_oo-aufnr     = x_mmcr_drseg-aufnr.
        x_mmcr_drseg_oo-aufpl     = x_mmcr_drseg-aufpl.
        x_mmcr_drseg_oo-basme     = x_mmcr_drseg-aufpl.
        x_mmcr_drseg_oo-bedat     = x_mmcr_drseg-bedat.
        x_mmcr_drseg_oo-begru     = x_mmcr_drseg-begru.
        x_mmcr_drseg_oo-bewae     = x_mmcr_drseg-bewae.
        x_mmcr_drseg_oo-ekgrp     = x_mmcr_drseg-ekgrp.
        x_mmcr_drseg_oo-bpmng     = x_mmcr_drseg-bpmng.
        x_mmcr_drseg_oo-bprme     = x_mmcr_drseg-bprme.
        x_mmcr_drseg_oo-bpumn     = x_mmcr_drseg-bprme.
        x_mmcr_drseg_oo-bpumz     = x_mmcr_drseg-bpumz.
        x_mmcr_drseg_oo-bpwem     = x_mmcr_drseg-bpwem.
        x_mmcr_drseg_oo-bprem     = x_mmcr_drseg-bprem.
        x_mmcr_drseg_oo-bsmng     = x_mmcr_drseg-bsmng.
        x_mmcr_drseg_oo-budat     = x_mmcr_drseg-budat.
        x_mmcr_drseg_oo-bukrs     = x_mmcr_drseg-bukrs.
        x_mmcr_drseg_oo-bwtar     = x_mmcr_drseg-bwtar.
        LOOP at x_mmcr_drseg-cr INTO x_drseg_cr.
          APPEND x_drseg_cr TO x_mmcr_drseg_oo-cr.
        ENDLOOP..
        LOOP at x_mmcr_drseg-co INTO x_drseg_co.
          APPEND x_drseg_co TO x_mmcr_drseg_oo-co.
        ENDLOOP..
        LOOP at x_mmcr_drseg-sm INTO x_drseg_sm.
          APPEND x_drseg_sm TO x_mmcr_drseg_oo-sm.
        ENDLOOP..
        x_mmcr_drseg_oo-charact   = x_mmcr_drseg-charact.
        x_mmcr_drseg_oo-uebgmat   = x_mmcr_drseg-uebgmat.
        x_mmcr_drseg_oo-uebrblgp  = x_mmcr_drseg-uebrblgp.
        x_mmcr_drseg_oo-selkz_db  = x_mmcr_drseg-selkz_db.
        x_mmcr_drseg_oo-rblgp_old = x_mmcr_drseg-rblgp_old.
      ENDLOOP.

    Hi
    I don't think, I'm agree with you, u can only replace some statament:
    LOOP AT E_TDRSEG INTO X_MMCR_DRSEG.
      X_MMCR_DRSEG_OO-ANLN1     = X_MMCR_DRSEG-ANLN1.
      X_MMCR_DRSEG_OO-ANLN2     = X_MMCR_DRSEG-ANLN2.
      X_MMCR_DRSEG_OO-APLZL     = X_MMCR_DRSEG-APLZL.
      X_MMCR_DRSEG_OO-AREWR     = X_MMCR_DRSEG-AREWR.
      X_MMCR_DRSEG_OO-AREWW     = X_MMCR_DRSEG-AREWW.
      X_MMCR_DRSEG_OO-AUFNR     = X_MMCR_DRSEG-AUFNR.
      X_MMCR_DRSEG_OO-AUFPL     = X_MMCR_DRSEG-AUFPL.
      X_MMCR_DRSEG_OO-BASME     = X_MMCR_DRSEG-AUFPL.
      X_MMCR_DRSEG_OO-BEDAT     = X_MMCR_DRSEG-BEDAT.
      X_MMCR_DRSEG_OO-BEGRU     = X_MMCR_DRSEG-BEGRU.
      X_MMCR_DRSEG_OO-BEWAE     = X_MMCR_DRSEG-BEWAE.
      X_MMCR_DRSEG_OO-EKGRP     = X_MMCR_DRSEG-EKGRP.
      X_MMCR_DRSEG_OO-BPMNG     = X_MMCR_DRSEG-BPMNG.
      X_MMCR_DRSEG_OO-BPRME     = X_MMCR_DRSEG-BPRME.
      X_MMCR_DRSEG_OO-BPUMN     = X_MMCR_DRSEG-BPRME.
      X_MMCR_DRSEG_OO-BPUMZ     = X_MMCR_DRSEG-BPUMZ.
      X_MMCR_DRSEG_OO-BPWEM     = X_MMCR_DRSEG-BPWEM.
      X_MMCR_DRSEG_OO-BPREM     = X_MMCR_DRSEG-BPREM.
      X_MMCR_DRSEG_OO-BSMNG     = X_MMCR_DRSEG-BSMNG.
      X_MMCR_DRSEG_OO-BUDAT     = X_MMCR_DRSEG-BUDAT.
      X_MMCR_DRSEG_OO-BUKRS     = X_MMCR_DRSEG-BUKRS.
      X_MMCR_DRSEG_OO-BWTAR     = X_MMCR_DRSEG-BWTAR.
      X_MMCR_DRSEG_OO-CR[]      = X_MMCR_DRSEG-CR[].
      X_MMCR_DRSEG_OO-CO[]      = X_MMCR_DRSEG-CO[].
      X_MMCR_DRSEG_OO-SM[]      = X_MMCR_DRSEG-SM[].
      X_MMCR_DRSEG_OO-CHARACT   = X_MMCR_DRSEG-CHARACT.
      X_MMCR_DRSEG_OO-UEBGMAT   = X_MMCR_DRSEG-UEBGMAT.
      X_MMCR_DRSEG_OO-UEBRBLGP  = X_MMCR_DRSEG-UEBRBLGP.
      X_MMCR_DRSEG_OO-SELKZ_DB  = X_MMCR_DRSEG-SELKZ_DB.
      X_MMCR_DRSEG_OO-RBLGP_OLD = X_MMCR_DRSEG-RBLGP_OLD.
    ENDLOOP.
    If you want to use APPEND statament u need to refresh the target table at very loop:
    LOOP AT E_TDRSEG INTO X_MMCR_DRSEG.
      X_MMCR_DRSEG_OO-ANLN1     = X_MMCR_DRSEG-ANLN1.
      X_MMCR_DRSEG_OO-ANLN2     = X_MMCR_DRSEG-ANLN2.
      X_MMCR_DRSEG_OO-APLZL     = X_MMCR_DRSEG-APLZL.
      X_MMCR_DRSEG_OO-AREWR     = X_MMCR_DRSEG-AREWR.
      X_MMCR_DRSEG_OO-AREWW     = X_MMCR_DRSEG-AREWW.
      X_MMCR_DRSEG_OO-AUFNR     = X_MMCR_DRSEG-AUFNR.
      X_MMCR_DRSEG_OO-AUFPL     = X_MMCR_DRSEG-AUFPL.
      X_MMCR_DRSEG_OO-BASME     = X_MMCR_DRSEG-AUFPL.
      X_MMCR_DRSEG_OO-BEDAT     = X_MMCR_DRSEG-BEDAT.
      X_MMCR_DRSEG_OO-BEGRU     = X_MMCR_DRSEG-BEGRU.
      X_MMCR_DRSEG_OO-BEWAE     = X_MMCR_DRSEG-BEWAE.
      X_MMCR_DRSEG_OO-EKGRP     = X_MMCR_DRSEG-EKGRP.
      X_MMCR_DRSEG_OO-BPMNG     = X_MMCR_DRSEG-BPMNG.
      X_MMCR_DRSEG_OO-BPRME     = X_MMCR_DRSEG-BPRME.
      X_MMCR_DRSEG_OO-BPUMN     = X_MMCR_DRSEG-BPRME.
      X_MMCR_DRSEG_OO-BPUMZ     = X_MMCR_DRSEG-BPUMZ.
      X_MMCR_DRSEG_OO-BPWEM     = X_MMCR_DRSEG-BPWEM.
      X_MMCR_DRSEG_OO-BPREM     = X_MMCR_DRSEG-BPREM.
      X_MMCR_DRSEG_OO-BSMNG     = X_MMCR_DRSEG-BSMNG.
      X_MMCR_DRSEG_OO-BUDAT     = X_MMCR_DRSEG-BUDAT.
      X_MMCR_DRSEG_OO-BUKRS     = X_MMCR_DRSEG-BUKRS.
      X_MMCR_DRSEG_OO-BWTAR     = X_MMCR_DRSEG-BWTAR.
      REFRESH: X_MMCR_DRSEG_OO-CR,
               X_MMCR_DRSEG_OO-CO,
               X_MMCR_DRSEG_OO-SM.
      APPEND LINES OF: X_MMCR_DRSEG-CR TO X_MMCR_DRSEG_OO-CR,
                       X_MMCR_DRSEG-CO TO X_MMCR_DRSEG_OO-CO
                       X_MMCR_DRSEG-SM TO X_MMCR_DRSEG_OO-SM.
      X_MMCR_DRSEG_OO-CHARACT   = X_MMCR_DRSEG-CHARACT.
      X_MMCR_DRSEG_OO-UEBGMAT   = X_MMCR_DRSEG-UEBGMAT.
      X_MMCR_DRSEG_OO-UEBRBLGP  = X_MMCR_DRSEG-UEBRBLGP.
      X_MMCR_DRSEG_OO-SELKZ_DB  = X_MMCR_DRSEG-SELKZ_DB.
      X_MMCR_DRSEG_OO-RBLGP_OLD = X_MMCR_DRSEG-RBLGP_OLD.
    ENDLOOP.
    Max

  • How to follow a question and not a whole community?

    How to follow a question and not a whole community?
    THanks.

    If that's not the problem turn off all the blue checks and bookmark the question. To view tap your name then bookmarks, unfortunately with this method you don't get the email updates.
    Michael Vallance

  • Why can't I ask any follow-up questions?

    Why is my earlier message marked 'Read Only' . . . it's the only one I can find that is. I have follow-up questions, and can't find anything in the Help section that addresses 'Read only'.

    deweyrich, I don't know how it got marked as such, but I've fixed it.
    Thanks for bringing it to my attention, Jerry.
    - Peter

  • TS2446 I forgotten your answers, I Verify your identity by answering the following security questions before I can complete your purchase.

    I forgotten your answers, I Verify your identity by answering the following security questions before I can complete your purchase.

     Account Security Team (AST) 
    Check the AppleCare number for your country here:
    http://support.apple.com/kb/HE57
    Call them up, and let them know you would like to be transferred to the Account Security Team.

  • Less dumb follow-up question about super/sub classes in WDJ?

    This is a follow-up question to the question which Maksim answered in this thread:
    Dumb question about super/sub classes in WDJ
    Question:
    Is there any kind of weird C++-like statement that you can put at the top of a WDJ module to force the module to interpret any reference to superclass A as a reference to some specific subclass B of A ???

    David,
    1. Java has no preprocessor, so C++ tricks are not available. Also I would not recommend such tricks even in C++ if you don't want to turn your colleagues working with same code into personal enemies.
    2. The phrase "easier to create a WDJ custom class loader " makes me smile. First, it's not that simple to interfere WDJ class loading scheme. Plus custom class loaders is not trivial Java topic per se.
    3. The problem "replace all A-s with B-s" is typically solved using one or another GoF creation patterns, like <a href="http://en.wikipedia.org/wiki/Abstract_factory_pattern">Abstract Factory</a> or <a href="http://en.wikipedia.org/wiki/Factory_method_pattern">Factory Method</a>. You may use them with custom class loader, if you really want to
    By the way, all UI controls in WD are created using Abstract Factory (role played by view). So you may use this as good example.
    Valery Silaev
    SaM Solutions
    http://www.sam-solutions.net

  • Active Directory Connector Questions in 11.1.2.1

    Hello All.  I am new to this version of IDM and I am trying to get through the setup and config.  I just installed a single instance of 11.1.2.1 with OUD, OAM, OIM.  I installed the Active Directory connector for User Management and I believe I have it configured. 
    I followed the post at Weblogic Corner: Oracle Identity Manager: The Active Directory Connector Tutorial and got a lot of questions answered with that.  First, note that I was able to follow the guide and run the lookup recon jobs as well as the user and group recon in trusted mode, then target mode to create all of the users and groups.  I am also able to create a user in OIM, add an account and have that provisioned to AD. 
    Here are my questions if you would be so kind:
    1) When I create a user in AD and I run the user recon(target), the event says "No User Match Found".  I was kind of expecting it to create a new user for me.  I was also expecting to schedule the recon job in target mode and not have to ever switch back to trusted mode after the first full sync.  What did I miss here?
    2) When I add an account to the user in OIM, the AD User form comes up with all the fields empty.  Is that the way it should work?  I was hoping that it would prepopulate some of the stuff from the OIM profile.
    3) When I modify a field in OIM, say middle name, will that sync in the next recon run, or will the admin need to open the account, update the AD form also and submit the middle name in two places?
    Thanks in advance!

    1. Identity gets created in Oracle Identity Manager from an authoritative source. in case of target recon, it will just sync with the matched account in oim.
    please have a look in the below link seccion 12.1.12
    Managing Reconciliation - 11g Release 2 (11.1.2)
    2.u can very well prepopulate filed in the process definition, even u can automate the provisioning process using  role based when provissioning process.
    3.there should be some tasks available for each field. no need run the recon task or modify the account in AD. it will be updated in AD using the tasks. check the connector process definition.

  • Please help me with the following two questions, very urgent

    Hi All,
    Please help me with some scenerios about what are the common problems when modifying a standard script such a standard Invoice script and how can we overcome them.
    What are the common problems encountered when working with SAP SMARTFORMS and how to overcome them?
    Please help me with these questions, its very urgent.
    Thanks in advance.
    MD.

    hi
    hope it will help you.
    reward if ehlp.
    How to create a New smartfrom, it is having step by step procedure
    http://sap.niraj.tripod.com/id67.html
    step by step good ex link is....
    http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
    Here is the procedure
    1. Create a new smartforms
    Transaction code SMARTFORMS
    Create new smartforms call ZSMART
    2. Define looping process for internal table
    Pages and windows
    First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
    Here, you can specify your title and page numbering
    &SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
    Main windows -> TABLE -> DATA
    In the Loop section, tick Internal table and fill in
    ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
    3. Define table in smartforms
    Global settings :
    Form interface
    Variable name Type assignment Reference type
    ITAB1 TYPE Table Structure
    Global definitions
    Variable name Type assignment Reference type
    ITAB2 TYPE Table Structure
    4. To display the data in the form
    Make used of the Table Painter and declare the Line Type in Tabstrips Table
    e.g. HD_GEN for printing header details,
    IT_GEN for printing data details.
    You have to specify the Line Type in your Text elements in the Tabstrips Output options.
    Tick the New Line and specify the Line Type for outputting the data.
    Declare your output fields in Text elements
    Tabstrips - Output Options
    For different fonts use this Style : IDWTCERTSTYLE
    For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
    5. Calling SMARTFORMS from your ABAP program
    REPORT ZSMARTFORM.
    Calling SMARTFORMS from your ABAP program.
    Collecting all the table data in your program, and pass once to SMARTFORMS
    SMARTFORMS
    Declare your table type in :-
    Global Settings -> Form Interface
    Global Definintions -> Global Data
    Main Window -> Table -> DATA
    Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
    http://sapr3.tripod.com
    TABLES: MKPF.
    DATA: FM_NAME TYPE RS38L_FNAM.
    DATA: BEGIN OF INT_MKPF OCCURS 0.
    INCLUDE STRUCTURE MKPF.
    DATA: END OF INT_MKPF.
    SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
    SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
    MOVE-CORRESPONDING MKPF TO INT_MKPF.
    APPEND INT_MKPF.
    ENDSELECT.
    At the end of your program.
    Passing data to SMARTFORMS
    call function 'SSF_FUNCTION_MODULE_NAME'
    exporting
    formname = 'ZSMARTFORM'
    VARIANT = ' '
    DIRECT_CALL = ' '
    IMPORTING
    FM_NAME = FM_NAME
    EXCEPTIONS
    NO_FORM = 1
    NO_FUNCTION_MODULE = 2
    OTHERS = 3.
    if sy-subrc <> 0.
    WRITE: / 'ERROR 1'.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    call function FM_NAME
    EXPORTING
    ARCHIVE_INDEX =
    ARCHIVE_INDEX_TAB =
    ARCHIVE_PARAMETERS =
    CONTROL_PARAMETERS =
    MAIL_APPL_OBJ =
    MAIL_RECIPIENT =
    MAIL_SENDER =
    OUTPUT_OPTIONS =
    USER_SETTINGS = 'X'
    IMPORTING
    DOCUMENT_OUTPUT_INFO =
    JOB_OUTPUT_INFO =
    JOB_OUTPUT_OPTIONS =
    TABLES
    GS_MKPF = INT_MKPF
    EXCEPTIONS
    FORMATTING_ERROR = 1
    INTERNAL_ERROR = 2
    SEND_ERROR = 3
    USER_CANCELED = 4
    OTHERS = 5.
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    Smartform
    you can check this link here you can see the steps and you can do it the same by looking at it..
    http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
    SMARTFORMS STEPS.
    1. In Tcode se11 Create a structure(struct) same like the Internal table that you are going to use in your report.
    2. Create Table type(t_struct) of stracture in se11.
    3. In your program declare Internal table(Itab) type table of structure(struct).
    4. Define work area(wa) like line of internal table.
    5. Open Tcode Smartforms
    6. In form Global setting , forminterface Import parameter define Internal table(Itab) like table type of stracture(t_struct).
    7. In form Global setting , Global definitions , in Global data define Work area(wa) like type stracture(struct).
    8. In form pages and window, create Page node by default Page1 is available.
    9. In page node you can create numbers of secondary window. But in form there is only one Main window.
    10. By right click on page you can create windows or Go to Edit, Node, Create.
    11. After creating the window right click on window create table for displaying the data that you are passing through internal table.
    12. In the table Data parameter, loop internal internal table (Itab) into work area(wa).
    13. In table there are three areas Header, Main Area, Footer.
    14. Right click on the Main area create table line by default line type1 is there select it.
    15. Divide line into cells according to your need then for each cell create Text node.
    16. In text node general attribute. Write down fields of your work area(wa) or write any thing you want to display.
    17. Save form and activate it.
    18. Then go to Environment, function module name, there you get the name of function module copy it.
    19. In your program call the function module that you have copied from your form.
    20. In your program in exporting parameter of function pass the internal table(itab).
    SAP Smart Forms is introduced in SAP Basis Release 4.6C as the tool for creating and maintaining forms.
    SAP Smart Forms allow you to execute simple modifications to the form and in the form logic by using simple graphical tools; in 90% of all cases, this won't include any programming effort. Thus, a power user without any programming knowledge can
    configure forms with data from an SAP System for the relevant business processes.
    To print a form, you need a program for data retrieval and a Smart Form that contains the entire from logic. As data retrieval and form logic are separated, you must only adapt the Smart Form if changes to the form logic are necessary. The application program passes the data via a function module interface to the Smart Form. When activating the Smart Form, the system automatically generates a function module. At runtime, the system processes this function module.
    You can insert static and dynamic tables. This includes line feeds in individual table cells, triggering events for table headings and subtotals, and sorting data before output.
    You can check individual nodes as well as the entire form and find any existing errors in the tree structure. The data flow analysis checks whether all fields (variables) have a defined value at the moment they are displayed.
    SAP Smart Forms allow you to include graphics, which you can display either as part of the form or as background graphics. You use background graphics to copy the layout of an existing (scanned) form or to lend forms a company-specific look. During printout, you can suppress the background graphic, if desired.
    SAP Smart Forms also support postage optimizing.
    Also read SAP Note No. 168368 - Smart Forms: New form tool in Release 4.6C
    What Transaction to start SAP Smart Forms?
    Execute transaction SMARTFORMS to start SAP Smart Forms.
    Key Benefits of SAP Smart Forms:
    SAP Smart Forms allows you to reduce considerably the implementation costs of mySAP.com solutions since forms can be adjusted in minimum time.
    You design a form using the graphical Form Painter and the graphical Table Painter. The form logic is represented by a hierarchy structure (tree structure) that consists of individual nodes, such as nodes for global settings, nodes for texts, nodes for output tables, or nodes for graphics.
    To make changes, use Drag & Drop, Copy & Paste, and select different attributes.
    These actions do not include writing of coding lines or using a Script language.
    Using your form description maintained in the Form Builder, Smart Forms generates a function module that encapsulates layout, content and form logic. So you do not need a group of function modules to print a form, but only one.
    For Web publishing, the system provides a generated XML output of the processed form.
    Smart Forms provides a data stream called XML for Smart Forms (XSF) to allow the use of 3rd party printing tools. XSF passes form content from R/3 to an external product without passing any layout information about the Smart Form.
    SmartForms System Fields
    Within a form you can use the field string SFSY with its system fields. During form processing the system replaces these fields with the corresponding values. The field values come from the SAP System or are results of the processing.
    System fields of Smart Forms
    &SFSY-DATE&
    Displays the date. You determine the display format in the user master record.
    &SFSY-TIME&
    Displays the time of day in the form HH:MM:SS.
    &SFSY-PAGE&
    Inserts the number of the current print page into the text. You determine the format of the page number (for example, Arabic, numeric) in the page node.
    &SFSY-FORMPAGES&
    Displays the total number of pages for the currently processed form. This allows you to include texts such as'Page x of y' into your output.
    &SFSY-JOBPAGES&
    Contains the total page number of all forms in the currently processed print request.
    &SFSY-WINDOWNAME&
    Contains the name of the current window (string in the Window field)
    &SFSY-PAGENAME&
    Contains the name of the current page (string in the Page field)
    &SFSY-PAGEBREAK&
    Is set to 'X' after a page break (either automatic [Page 7] or command-controlled [Page 46])
    &SFSY-MAINEND&
    Is set as soon as processing of the main window on the current page ends
    &SFSY-EXCEPTION&
    Contains the name of the raised exception. You must trigger your own exceptions, which you defined in the form interface, using the user_exception macro (syntax: user_exception <exception name >).
    Example Forms Available in Standard SAP R/3
    SF_EXAMPLE_01
    Simple example; invoice with table output of flight booking for one customer
    SF_EXAMPLE_02
    Similar to SF_EXAMPLE_01 but with subtotals
    SF_EXAMPLE_03
    Similar to SF_EXAMPLE_02, whereby several customers are selected in the application program; the form is called for each customer and all form outputs are included in an output request
    Advantages of SAP Smart Forms
    SAP Smart Forms have the following advantages:
    1. The adaption of forms is supported to a large extent by graphic tools for layout and logic, so that no programming knowledge is necessary (at least 90% of all adjustments). Therefore, power user forms can also make configurations for your business processes with data from an SAP system. Consultants are only required in special cases.
    2. Displaying table structures (dynamic framing of texts)
    3. Output of background graphics, for form design in particular the use of templates which were scanned.
    4. Colored output of texts
    5. User-friendly and integrated Form Painter for the graphical design of forms
    6. Graphical Table Painter for drawing tables
    7. Reusing Font and paragraph formats in forms (Smart Styles)
    8. Data interface in XML format (XML for Smart Forms, in short XSF)
    9. Form translation is supported by standard translation tools
    10. Flexible reuse of text modules
    11. HTML output of forms (Basis release 6.10)
    12. Interactive Web forms with input fields, pushbuttons, radio buttons, etc. (Basis-Release 6.10)

  • Photo quality follow-up questions

    I read OT's response to a photo quality question and had some follow-ups I'd like to ask. Aside from cropping photos to 4:3 format does increasing the dpi of the photos have any effect in improving the quality of the final image in iDVD?
    I'm making a dvd of family photos for my wife. Some were taken with a digital camera, some are photos scanned by myself and some are photos given to us by relatives that they scanned. I'm putting them together in iMovie, leaving them static - no pans or zooms, keeping the image size at a value of "1", setting the duration at 5 seconds and grouping them by subject using chapter markers so I can get around the 99 photos limitation. (I have over 1500 photos.)
    I've already burned on dvd and was disappointed by the "jaggies" on most of the photos when viewed on my cinema display. Haven't looked at the dvd on a regular tv (CRT, not flat screen/digital). The images looked great in iMovie. It occurred to me that increasing the dpi - most were at 72 dpi - to 300 might improve this issue all other things remaining the same. I can do that easily in Photoshop, but was wondering if that would be a waster of time - especially if no improvement would be realized.
    Thanks for any thoughts/help that anyone can offer.

    iMovie HD 6.0.3 and iDVD 6.0.4
    As far as I know - this will give max quality possibly when making a Video-DVD
    resolution: 72dpi or 300dpi
    depends on size
    A small picture 200 x 300 pixels - will be worse than a 1200 x 1600 picture.
    Resolution doesn't matter as I see it.
    iMovie and/or iDVD will try to scale it to fit - and up or down-scaling
    will not be done kindly.
    Still using my 2016 × 1512 - usually give good result in iMovie
    but if I Share to iDVD (iMovie HD6 6.0.3 or 4) - BAD RESULT
    I just close the iMovie project
    Drop the iMovie project icon (With a black star on it) into the iDVD application (menu window).
    Result best possibly for a Video-DVD - DVD standard is the limit.
    Else that determine the final quality on the DVD
    DVD quality
    1. iDVD 08, 09 & 11 has three levels of qualities. (version 7.0.1, 7,0.4 & 7.1.1) and iDVD 6 has the two last ones
    • Professional Quality
    (movies + menus up to 120 min.) - BEST (but not always for short movies e.g. up to 45 minutes in total)
    • Best Performances
    (movies + menus less than 60 min.) - High quality on final DVD (Can be best for short movies)
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6)
    (movies + menus up to 120 min.) - slightly lower quality than above
    Menu can take 15 minutes or even more - I use a very simple one with no audio or animation like ”Brushed Metal” in old Themes.
    About double on DL DVDs.
    2. Video from
    • FCE/P - Export out as full quality QuickTime.mov (not self-containing, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos and the Ken Burns effect NOT is used. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 or 09 or 11 are not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly e.g. x4 or x1 (in iDVD’08 or 09  this can also be set)
    This can also be done with Apple’s Disk Utilities application when burning from a DiskImage.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc). For SD-Video - if HD-material is used I guess that 4 to 5 times more would do.
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW) - DVD-R play’s on more and older DVD-Players
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    (I use JES_Deinterlacer to keep frame per sec. same from editing to the Video-DVD result.)
    8. Don’t burn more than three DVDs at a time - but let the laser cool off for a while before next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a short-lived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-Player.
    Blu-Ray / BD can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl. BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to playback
    The BD-encoded DVDs can be play-backed IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx. 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera record in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JES_Deinterlacer_3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are play-backed by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choice before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    unclemano wrote
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    Try to break the process up into two stages
    • Save as a DiskImage (calculating part)
    • Burn from this .img file (burning stage)
    To isolate where the problem starts.
    Another thing is - Playing it onto a Blu-Ray Player. My PlayStation3 can play BD-disks but not all of my home made DVDs so to get this to work I
    • Secure a minimum of 25Gb free space on Start-Up (Mac OS) hard disk
    • Use Verbatim DVD-R (absolutely no +/-RW)
    • Set down burn speed to x4 - less burn errors = plays on more devices
    • No other process running in background as - ScreenSaver, EnergySaver OR TIMEMACHINE etc
    • and I'm very careful on what kind of video-codecs, audio file format and photo file formats I use
    • and I consider the iDVD Bug - never go back to video-editor to change/up-date - if so Start  a brand new iDVD project
    • Chapters set as they should - NO one at very beginning and no one in any transition or within 2 sec from it
    • Lay-out - Turn on TV-Safe area and keep everything buttons, titles etc WELL INSIDE not even touching it !
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround e.g. Energy-Saver
    • Don’t let HD spin down or be turned off (in Energy-Save)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screen-saver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    • No File Vault on - Important
    • NO - TimeMachine - during iMovie/iDVD work either ! IMPORTANT
    • Lot's of icons on DeskTop/Finder also slows down the Mac noticeably
    • Start a new User-Account and log into this and iMovie get's faster too - if a project is in a hurry
    • And let Mac run on Mains - not just on battery
    Yours Bengt W

  • Please give me answers for the following interview questions ?

    Dear  friends,
    Greets............................................
              Pls give me solutions for th following questions?
    1.How to  record BDC using Call Transaction without screen sequence of a particular transaction code?
    2.How to initiate the Call Transaction by coding without using Call Transaction Mode 'S' or 'A'.
    3.How to run the BDC program without legacy file from Presentation Server. If   Application Server how?
    4.How BDC overcomes BAPI?
    5.Difference between Function Module and BAPI.
    6.How to create a BAPI.
    7.How to display Footer text in last page of the script.
    8.How to display Footer text in last page of the script without touching the layout only using print program.
    9. Standard text creation without using SO10 . How to save?
    where to save? How to include in the print program?
    10.How Script overcomes Smartforms?
    11. How to access smartforms thru programs without using SSF_FUNCTION_MODULE_NAME.
    12.In smartforms First page should be portriat and second page must be landscape format. Is it possible?
    13.How to create internal table globally.
    14. How to delete F4 help for a particular field in the selection screen.
    15.How to set the password field in the selection screen as it is in the initail screen containing Client, Username,Password.
    17. How to use the Hash table algorithm and how access it.
    18. Prerequisites for  FOR ALL ENTRIES.
    19.MENTION  the Tcode for performance issue Other than SLIN,SE30,ST05 ?
    20. Table Types?
    21SAP LUW
    22.Types of Lock objects.
    Thanks in Advance********************************************
    Regards
    Raj kumar

    For BDC:
    http://myweb.dal.ca/hchinni/sap/bdc_home.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
    http://www.sap-img.com/abap/learning-bdc-programming.htm
    http://www.sapdevelopment.co.uk/bdc/bdchome.htm
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
    http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
    Check these link:
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://www.sap-img.com/abap/question-about-bdc-program.htm
    http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
    http://www.planetsap.com/bdc_main_page.htm
    call Transaction or session method ?
    http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
    http://www.****************/InterviewQ/interviewQ.htm
    http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
    Reports
    http://www.sapgenie.com/abap/reports.htm
    http://www.allsaplinks.com/material.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    Check these step-by-step links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
    for Smartforms material
    http://www.sap-basis-abap.com/sapsf001.htm
    http://www.sap-press.com/downloads/h955_preview.pdf
    http://www.ossincorp.com/Black_Box/Black_Box_2.htm
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    http://www.sap-img.com/smartforms/smartform-tutorial.htm
    http://www.sapgenie.com/abap/smartforms.htm
    How to trace smartform
    http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
    http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
    http://www.sap-img.com/smartforms/smart-006.htm
    http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
    Re: Need FAQ's
    check most imp link
    http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
    step by step good ex link is....
    http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
    SAPScripts
    http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
    http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
    http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
    http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
    http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
    http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
    SAP SCRIPT FIELDS
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
    scripts easy material
    http://www.allsaplinks.com/sap_script_made_easy.html
    Debugging Document.
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
    http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    BAPI
    http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    Checkout !!
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    http://techrepublic.com.com/5100-6329-1051160.html#
    http://www.sap-img.com/bapi.htm
    http://www.sap-img.com/abap/bapi-conventions.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
    List of all BAPIs
    http://www.planetsap.com/LIST_ALL_BAPIs.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sappoint.com/abap/bapiprg.pdf
    http://www.sappoint.com/abap/bapiactx.pdf
    http://www.sappoint.com/abap/bapilst.pdf
    http://www.sappoint.com/abap/bapiexer.pdf
    http://service.sap.com/ale
    http://service.sap.com/bapi
    http://www.geocities.com/mpioud/Abap_programs.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    Simple ALV report
    http://www.sapgenie.com/abap/controls/alvgrid.htm
    http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    Go thru these programs they may help u to try on some hands on
    ALV Demo program
    BCALV_DEMO_HTML
    BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
    BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
    BCALV_GRID_DEMO Simple ALV Control Call Demo Program
    BCALV_TREE_DEMO Demo for ALV tree control
    BCALV_TREE_SIMPLE_DEMO
    BC_ALV_DEMO_HTML_D0100
    Remote Function Call:
    RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
    RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
    RFCs manage the communication process, parameter transfer and error handling.
    http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    Refer this
    http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
    http://www.****************/InterviewQ/interviewQ.htm
    http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
    http://www.techinterviews.com/?p=198
    http://www.techinterviews.com/?p=326
    http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
    http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
    http://www.sap-img.com/abap/abap-interview-question.htm
    http://www.allinterview.com/Interview-Questions/ABAP.html
    links for OO ABAP.
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com.
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    some more materials.
    Go through the following Documents Links & Materials for ABAP Objects
    check the below links lot of info and examples r there
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.geocities.com/victorav15/sapr3/abap_ood.html
    http://www.brabandt.de/html/abap_oo.html
    Check this cool weblog:
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
    /people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
    /people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    these links
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
    For funtion module to class
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
    for classes
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
    for methods
    http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
    for inheritance
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
    for interfaces
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
    For Materials:
    1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
    2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
    6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
    7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
    8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
    1) http://www.erpgenie.com/sap/abap/OO/index.htm
    2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    Hi,
    Please go through the following :
    ABAP Interview Questions
    1. How data is stored in cluster table?
    Each field of cluster table behaves as tables which contains the no. of entries.
    2. What are client dependant objects in abap/sap?
    SAP Script layout, text element, and some DDIC objects.
    3. On which even we can validate the input fields in module progams?
    In PAI (Write field statement on field you want to validate, if you want to validate group of fields put in chain and End chain statement.)
    4. In selection screen I have three fields, plant mat no and material group. If I input plant how do I get the mat no and material group based on plant dynamically?
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR MATERIAL.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST' to get material and material group for the plant.
    5. How do you get output from IDOC?
    Data in IDOc is stored in segments, the output from Idoc is obtained by reading the data stored in its respective segments.
    6. When top of the page event is triggered?
    After excuteing first write statement in start-of-selection event.
    7. Can we create field without data element and how?
    In SE11 one option is available above the fields strip. Data element/ direct type.
    8. How do we debug sapscript?
    Go to SE71 give lay set name , go to utilities select debugger mode on.
    9. Which transaction code can I used to analyze the performance of ABAP program.
    TCode AL21.
    10. How can I copy a standard table to make my own z_table.
    Go to transaction SE11. Then there is one option to copy table. Press that button. Enter the name of the standard table and in the Target table enter Z table name and press enter.
    1. What is the use of 'outerjoin'
    Ans. With the use of outer join you can join the tables even there is no entry in all the tables used in the view.
    In case of inner join there should be an entry in al the tables use in the view.
    2. When to use logical database?
    Ans. Advantage of Logical databases:
    less coding s required to retrieve data compared to normal internel tables.
    Tables used LDB are in hierarchial structure.
    3. What is the use of 'table index'?
    Ans .Index is used for faster access of data base tables.
    4. What is the use of 'FOR ALL ENTRIES'?
    Ans. To avoid nested select statements we use SELECT FOR ALL ENTRIES statement.
    If there r more than 10000 records SELECT FOR ALL ENTRIES is used.
    Performance wise SELECT FOR ALL ENTRIES is better to use.
    5. Can you set up background processing using CALL TRANSACTION?
    Yes,Using No Screen Mode.
    6. What are table buffers?
    Table buffers reside locally on each application server in the system. The data of buffered tables can thus be accessed
    directly from the buffer of the application server. This avoids the time-consuming process of accessing the database.
    Buffering is useful if table needs to be accessed more no. of times in a program.
    ABAP Technical Interview Questions:
    1. What is the typical structure of an ABAP program?
    2. What are field symbols and field groups.? Have you used "component idx of structure" clause with field groups?
    3. What should be the approach for writing a BDC program?
    4. What is a batch input session?
    5. What is the alternative to batch input session?
    6. A situation: An ABAP program creates a batch input session. We need to submit the program and the batch session in background. How to do it?
    7. What is the difference between a pool table and a transparent table and how they are stored at the database level?
    8. What are the problems in processing batch input sessions? How is batch input process different from processing on line?
    9. What do you define in the domain and data element?
    10. What are the different types of data dictionary objects?
    11. How many types of tables exist and what are they in data dictionary?
    12. What is the step-by-step process to create a table in data dictionary?
    13. Can a transparent table exist in data dictionary but not in the database physically?
    14. What are the domains and data elements?
    15. Can you create a table with fields not referring to data elements?
    16. What is the advantage of structures? How do you use them in the ABAP programs?
    17. What does an extract statement do in the ABAP program?
    18. What is a collect statement? How is it different from append?
    19. What is open sql vs native sql?
    20. What does an EXEC SQL stmt do in ABAP? What is the disadvantage of using it?
    21. What is the meaning of ABAP editor integrated with ABAP data dictionary?
    22. What are the events in ABAP language?
    23. What is an interactive report? What is the obvious diff of such report compared with classical type reports?
    24. What is a drill down report?
    25. How do you write a function module in SAP? Describe.
    26. What are the exceptions in function module?
    27. What is a function group?
    28. How are the date abd time field values stored in SAP?
    29. What are the fields in a BDC_Tab Table?
    30. Name a few data dictionary objects?
    31. What happens when a table is activated in DD?
    32. What is a check table and what is a value table?
    33. What are match codes? Describe?
    34. What transactions do you use for data analysis?
    35. What is table maintenance generator?
    36. What are ranges? What are number ranges?
    37. What are select options and what is the diff from parameters?
    38. How do you validate the selection criteria of a report? And how do you display initial values in a selection screen?
    39. What are selection texts?
    40. What is CTS and what do you know about it?
    41. When a program is created and need to be transported to prodn does selection texts always go with it? if not how do you make sure? Can you change the CTS entries? How do you do it?
    42. What is the client concept in SAP? What is the meaning of client independent?
    43. Are programs client dependent?
    44. Name a few system global variables you can use in ABAP programs?
    45. What are internal tables? How do you get the number of lines in an internal table? How to use a specific number occurs statement?
    46. How do you take care of performance issues in your ABAP programs?
    47. What are datasets?
    48. How to find the return code of a stmt in ABAP programs?
    49. What are interface/conversion programs in SAP?
    50. Have you used SAP supplied programs to load master data?
    2. Adapted from response by Maram Roja on Tuesday, June 15, 2004
    1. What are the techniques involved in using SAP supplied programs? Do you prefer to write your own programs to load master data? Why?
    2. What are logical databases? What are the advantages/disadvantages of logical databases?
    3. What specific statements do you using when writing a drill down report?
    4. What are different tools to report data in SAP? What all have you used?
    5. What are the advantages and disadvantages of ABAP query tool?
    6. What are the functional areas? User groups? How does ABAP query work in relation to these?
    7. Is a logical database a requirement/must to write an ABAP query?
    8. What is the structure of a BDC sessions.
    9. What are Change header/detail tables? Have you used them?
    10. What do you do when the system crashes in the middle of a BDC batch session?
    11. What do you do with errors in BDC batch sessions?
    12. How do you set up background jobs in SAP? What are the steps? What are the event driven batch jobs?
    13. Is it possible to run host command from SAP environment? How do you run?
    14. What kind of financial periods exist in SAP? What is the relevant table for that?
    15. Does SAP handle multiple currencies? Multiple languages?
    16. What is a currency factoring technique?
    17. How do you document ABAP programs? Do you use program documentation menu option?
    18. What is SAPscript and layout set?
    19. What are the ABAP commands that link to a layout set?
    20. What is output determination?
    ABAP Interview Questions
    1.Without using Tcode SE11, How can we enter the values in to the table???
    2.What is the difference between Collect statement and Append Statement???
    3.What do you mean by correction and Transportation system???
    4.What is the difference between User Exits and BADI????
    5.How can we identify User exits in our screen???
    6.What do you mean by Inbound and Outbound interface???
    7.In realtime do we configure ALE systems or Administator will take care of that??
    8.How to release an object???
    9.What is the flow of a Sales document???
    10.What is the flow of Purchase order???
    12.What is the flow of Invoice???
    13.What are the standard IDOC's used???
    14.What do you mean by table control???Where will we use this???
    15.What are field symbols??Where will we use these symbols???
    Deepti
    1. There are other ways of entering data into a DB table. ex. B D C
    2. Collect statement collect/adds the records basing on a key field. allows to create summarised data sets.
    Append will append/add a record at the end of existing records
    8. to release an object - use se10/se9
    9. sales doc flow: S. A. - S. O. - Delivery - Billing
    12. Delivery - invoice.
    15. field symbols are used for dynamic allocation. at runtime u can assign a concrete field to field-symbol.
    Kishore
    1. you can go to abap editor (se38) and use insert statement for insertion update for update and modify for modifications.
    2. collect will not allow duplicate entries, while append can allow duplicates.
    3. if any changes are made to objects they are to be transported to different systems i.e, change and transport.
    4. in user exits we go by general method for enhancements while BADIs we use objects (oops concepts)
    methods for enhancement.
    14. table controls are enhanced version for step loops where we can expand rows .main difference between these two
    is step loop can be expanded to two lines table controls can`t.
    15. field symbols are just like pointers concept which are used in C language. We use them when we want to refer to
    the fields considered,it doesnt allocate any memory for it.
    Venu Rapolu
    1. Ans: Using BDC., LSMW,,ALE., BAPI
    2. Ans: Collect: it adds the numeric fields to the existing non numeric key field records., thereby avoiding duplicate
    values., and append will simply adds the record
    3 . Ans: The CTS contains work bench organizer and transport system :
    The workbench organizer is used to record and contol changes to the ABAP/4 development objects;
    The transport system is used to move objects from an SAP dev.system to production system
    6. Ans: Outbound interface is used to send IDocs to the ALE server.,
    Inbound interface is used to Analyse the received Idoc.
    7. Ans: We (ABAPers) don't do.
    8. Ans: se09 or se10
    13. Ans: MATMAS
    CREMAS
    DEBMAS
    GLMAST etc...
    14. Ans: to display records in table format., we use in Screens
    15. Ans: we assign the field content at run time with ASSIGN stmt.
    Satish D
    1. goto se16 u can view the table contents
    2. collect will collects all the numeric fields of nonnumeric field values
    append will append record at the end of table
    3. when we are creatiing new task like dev. a new prg.. after completion of dev. that will be trnsported to testing system or production system to do that we are assigning an
    transport request from our dev.class(system) by using se09
    4. badis are dev. by class and inheritence methods where as user exitsdev by SAP only and empty shells filled wit user logic
    5. go to system then status
    6. outbound generating an idoc in ale layer with master_idoc_create_messgetype,
    inbound is receivng system with idoc_inbound_process, gives an return variable wether it is sucess or not
    7. no we have to configur that
    8. go to se09 or se01 there write your task no and use release button it will asks whats the other system name
    and number enter them and relase by pressing jeep button
    9. inquiry
    quotation
    sales order
    shipping
    delivery
    invoice
    return goods
    12. after creation of delivry note invoice is prepared
    13. master_idoc_distribute will generate standard idoc
    Deepti
    I am enclosing some of answers which I know.
    1. We can use t.Code SE16 to enter values into table only if table maintainence is allowed for that table.
    2. Append will add new entries into the table where as collect add into the numeric type fields if other charatcer fields
    matches to your selection criteria.
    3. CTS used for creation of ABAP development transport requests.The transaction code for this is SE10.
    4. UserExits r used for adding additional functionality to the existing SAP standard transactions.Using UserExits we can add additional functionality standard SAP functionality without making any changes to the original code.BADI is a standardized interface for ABAP sources that enables partners and customers to enhance SAP-delivered programs in their namespace.
    5 .We can identify User exits by using transactions CMOD and SMOD.
    6. After entering transaction code SE10 select the transport request which u want to transport and click on transport icon(Truck symbol) to release it.
    10. Purchase Requistion->RFQ->Vendor Evaluation->Purchase Order(ME21).
    14. Table control is the only facility provide thru dialog programming when we come acrosse the use of updating standared,deletion,insertion and all database operations.
    15. Field symbols r pointers to the existing data types(like 'C') which does not allocate any memory space. These are used faster access of data.
    Answers to some ABAP Interview Questions:
    Questions which I have faced in an interview:
    1) What is runtime analysis? Have you used this?
    2) What is meant by performance analysis? Have done anything to improve the performance?
    3) How to transfer the objects? Have to transferred any objects?
    4) How did you test the developed objects?
    5) What is the difference between SAP Memory and ABAP Memory?
    6) In order to upload Purchase order details, how you handle multiple values for a single field?
    Eg: Item field may contain no. of values for a record
    7) What is the procedure you followed to upload the data?
    8) How did you handle errors in Call Transaction?
    9) Among the Call Transaction and Session Method, which is faster?
    10) What are the difference between Interactive and Drill Down Reports?
    11) How to pass the variables to forms?
    12) How to create a link between modified form and modified print program?
    13) What is the table, which contain the details of all the name of the programs and forms?
    14) How did you test the form u developed? How did you taken print?
    15) What are Standard Texts?
    16) What is the difference between Clustered Tables and Pooled Tables?
    17) What is pf-status?
    18) Among "Move" and "Move Corresponding", which is efficient one?
    19) What are the output type and Tcodes?
    20) Where we use Chain and Endchain?
    21) Do you use select statement in loop endloop, how will be the performance? To improve the performance?
    22) In select-options, how to get the default values as current month first date and last date by default?
    Eg: 1/12/2004 and 31/12/2004
    Go thru these answers:
    1) What is runtime analysis? Have you used this?
    It's checks program execution time in microseconds. When you go to se30.if you give desired program name in performance file. It will take you to below screen. You can get how much past is your program.
    2) What is meant by performance analysis? Have done
    3) How to transfer the objects? Have you transferred any objects?
    4) How did you test the developed objects?
    I was testing a developed object. There are two types of testing
    - Negative testing
    - Positive testing
    In negative testing we will give negative data in input and we check any errors occurs.
    In positive testing we will give positive data in input for checking errors.
    8) How did you handle errors in Call Transaction?
    We can create a internal table like 'bsgmcgcoll'. All the messages will go to internal table. We can get errors in this internal table.
    Below messages are go to internal table. when you run the call transaction.
    - Message type
    - Message id
    - Message Number
    - Variable1
    - Variable2
    - Variable3
    9) Among the Call Transaction and Session Method, which is faster?
    Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct.
    10) What are the difference between Interactive and Drill Down Reports?
    ABAP/4 provides some interactive events on lists such as AT LINE-SELECTION (double click) or AT USER-COMMAND (pressing a button). You can use these events to move through layers of information about individual items in a list.
    Drill down report is nothing but interactive report...drilldown means above paragraph only.
    11) How to pass the variables to forms?
    12) What is the table, which contain the details of all the name of the programs and forms?
    Table cont

  • Active directory change question regarding affects on exchange 2013

    Good day,
      I have some universal security groups that are meant to be distribution groups in a 2008 R2 active directory forest.  These groups are being utilized by exchange 2013, I plan on turning these groups into global distribution groups in active
    directory (all changes will be made in active directory only, not in exchange).
      Question is; What will happen to the mail boxes using this group? Will it break the mailbox? How will users be affected?
     I plan on doing testing of my own but if someone else has already done this and has ran into issues this will help me out greatly.

    Hi ,
    Mail enabled security groups can be used for two purposes.
    1.Used to distribute emails to its members.
    2.Unlike mail enabled Distribution groups , Mail enabled security groups will have SID value , so it can be mapped on any resources (for eg : share folder ) to get the access permissions to it members.
    In your case ,You would like to change the scopes for the mail enabled security groups ,Before changing the group scopes just have a look in to the following link which states clearly about the group scopes and its usage.
    http://technet.microsoft.com/en-us/library/cc755692(v=ws.10).aspx
    Please feel to reply me if you have any queries.
    Thanks & Regards S.Nithyanandham

Maybe you are looking for

  • TCP/IP does not let me enable or disable.

    Hi,  I am trying to enable TCP/IP in order to access my SQL server remotely but when I select tcp/ip and want to enable = Yes or disabled = no it does not give me the option, it appears a gray empty rectangle.  Any idea what might happen?, I will lik

  • SMTP problems with Apple Mail 6.2

    Recently my Apple Mail 6.2 has become messed up. It tells me that all my accounts (a gmail, me.com & cloud) are all offline and can not be brought back on line. The Mail on my iPhone and iPad works fine with the exact same settings and exact same acc

  • B&W Background with a Colourized subject....

    After a year of using FCE, I've upgraded to FCS2, and I'm excited. These new features/apps look promising.... I'm hoping that someone can give me advice or point me in the right direction for a tutorial. Next week I begin filming a short documentary.

  • RH8 - Bookmarks/Pages aligning to the right in TOC pane when long topic titles clicked?

    Using Robohelp X5 standard webhelp the books/bookmarks are always aligned to the left and in view, as so: When converted to robohelp 8 standard webhelp the alignment for the same page seems to align to the end of the topic title, obscuring the books/

  • Source message Message Type: POR does not exist in software component versi

    HI All, I have a .tpz file exported from an SRM 4.0 PI system which i have imported in SRM 7.0 ECC 6.0 PI. I have imported the .tpz file through the import through "client" option. I am able to open all the objects but i am not able to open the Messa