ActiveX Commands not listed

I'm trying to add a date picker calendar to an excel 2010 worksheet. When I try to do
so with VBA I can't find the Command for a "Month View"in the list of available commands. When I have tried using an ActiveX Control, there is no "Microsoft Date and Time Picker Control" in the list of available commands.
Is there another source for these commands?

Hi,
As far as I know, the "Microsoft Date and time picker control" is part of the Windows Common controls. The file is MSCOMCT2.OCX, located in C:\Windows\System32 on 32-bit or C:\Windows\Syswow64 on 64-bit. If you don't have this
file, you can download it from the following location:
http://activex.microsoft.com/controls/vb6/MSCOMCT2.cab
Once you download the file, you'll need to extract the files and then register the OCX file. You will likely need to open the command prompt as administrator in order to get the file to register successfully. Here are the steps in case you need
them.
* Go to Start\All Programs\Accessories.
* Right-click Command Prompt and then click on Run As Administrator.
* Change directory to the folder where you extracted the files. For example, type the following and then press Enter: cd c:\windows\system32
* Type the following and then press Enter: regsvr32 mscomct2.ocx
* You should get a message saying this succeeded.
I hope this helps!
Source Link:
http://social.technet.microsoft.com/Forums/office/en-US/defdd35a-f285-4b84-bf4c-d62011823b37/access-2010-datepicker-control-missing
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Group Added With dscl Command Not Listed In Account Prefs

I added groups for each user per article 307128 using the dscl command:
sudo dscl . create /Groups/username GroupMembership username
sudo dscl . change /Groups/username RecordName username _username
But these new groups are not listed by the Account preferences on my new MacBook. They are listed on my iMac G4. Both machines are running 10.5.2. The accounts on the new MacBook were migrated from the iMac.
A dscl list shows that the groups are defined:
sudo dscl . list /Groups
And when I try to add a new group called _username with Account preferences I get an error saying the name is in use.
Any idea how to get Account preferences to show these groups?
Thanks.

ovithucu, in your contacts app, swipe down from the top bezel to Settings.
In the list of "Show Account in Contacts List", turn OFF each account shown, leaving none ON.
Tap the lower left BACK button.
Now, back in the main Contacts view, drag down on the screen to see the total number of contacts, what number is there?
Those are you "Local" contacts, stored locally in the device memory. Those can be cleared if you want, and start all over again.
Also, check your gmail account on a PC, login and see how many contacts you have in gmail which should be sycning to the device.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Diskinfo -a command not listing the newly added disk

Hi,
I replaced an internal disk on my T4-1 box. After the replacement, I am able to find the disk listed in:
echo | format
cfgadm -al
df -hk (have mounted a file system on this new disk)
But the issue is that I am unable to find the disk getting listed in the diskinfo -a output.
Please suggest what needs to be done.
# cfgadm -al
c9::w5000cca012c4ec8d,0 disk-path connected configured unknown
c10 scsi-sas connected configured unknown
c10::w5000cca012b4d099,0 disk-path connected configured unknown
c10::w5000cca012c99be5,0 disk-path connected unconfigured unknown
c11 scsi-sas connected configured unknown
c11::w5000cca012d20555,0 disk-path connected configured unknown
bash-3.2# echo | format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t5000CCA012B4D098d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012b4d098
1. c0t5000CCA012C4EC8Cd0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012c4ec8c
2. c0t5000CCA012C9AA14d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012c9aa14
3. c0t5000CCA012D20554d0 <LSI-MR9261-8i-2.12 cyl 65533 alt 2 hd 287 sec 31> solaris
/scsi_vhci/disk@g5000cca012d20554
4. c0t60080E50002499E60000039B504D627Fd0 <SUN-LCSM100_S-0780 cyl 38398 alt 2 hd 256 sec 64>
/scsi_vhci/disk@g60080e50002499e60000039b504d627f
5. c0t60080E50002499E60000039E504D62ABd0 <SUN-LCSM100_S-0780 cyl 38398 alt 2 hd 256 sec 64>
/scsi_vhci/disk@g60080e50002499e60000039e504d62ab
6. c1t50080E52499E6000d31 <SUN-UniversalXport-0777 cyl 8 alt 2 hd 64 sec 64>
/pci@400/pci@1/pci@0/pci@8/LSI,sas@0/iport@f/disk@w50080e52499e6000,1f
7. c3t50080E5249EC8000d31 <SUN-UniversalXport-0777 cyl 8 alt 2 hd 64 sec 64>
/pci@400/pci@2/pci@0/pci@8/LSI,sas@0/iport@f/disk@w50080e5249ec8000,1f
Specify disk (enter its number): Specify disk (enter its number):
bash-3.2#
bash-3.2# diskinfo -a
Enclosure path: 1203BD02DA-physical-hba-1
Chassis Serial Number: 1203BD02DA-physical-hba-1
Chassis Model: ORCL,Netra-SPARC-T4-1
Label Disk name Vendor Product Vers
/SYS/HDD0 c0t5000CCA012C9AA14d0 HITACHI H106030SDSUN300G A2B0
/SYS/HDD1 c0t5000CCA012C4EC8Cd0 HITACHI H106030SDSUN300G A2B0
/SYS/HDD3 c0t5000CCA012D20554d0 HITACHI H106030SDSUN300G A2B0
bash-3.2#
Seems like the issue will get resolved if I can remove the old entry of the disk in the cfgadm -al output.
But in our setup we can not use the luxadm command to make the disk unused.
So please suggest any alternative way to remove the extra entry (old disk's):
# cfgadm -la | grep “c10::”
c10::w5000cca012b4d099,0 disk-path connected configured unknown
c10::w5000cca012c99be5,0 disk-path connected unconfigured unknown
After reboot:
Output after reboot:
# cfgadm -al | grep “c10::”
c10::w5000cca012b4d099,0 disk-path connected configured unknown
Edited by: 951222 on Oct 23, 2012 4:57 AM

Please note that the diskinfo command was added to Solaris 10U10 to provide the disk location, but due to bug 7093855 it only displays disks from the first controller. This will be corrected in S10U11.
From Document 1365089.1 (How to locate a failed internal disk drive on a T3/T4 series system)

Insert ActiveX Object - not in list

Hi, guys.
After one time, I'm not able to install by myself ActiveX controls and embed these controls into ActiveX containers yet. I refer to ActiveX controls that can be embedded into ActiveX containers, not those used to instantiate other applications.
I want a certain ActiveX Control to be displayed in an ActiveX Container on the Front Panel. In this particular case, it's a Mozilla Firefox ActiveX Control. According to http://forums.ni.com/t5/LabVIEW/activex-firefox-and-mozilla/td-p/356235 (see message 5), after getting the component from the link provided and installing it, I should be able to insert onto the empty ActiveX Container by clicking over it and selecting "Insert ActiveX Object...". In this case, "MozillaBrowser class" should appear in the list, but not.
However, if I place a Property Node or Invoke Node without reference on the Block Diagram, click on it, then "Select Class" -> "ActiveX" -> "Browse", I find the class "MozillaControl 1.0 Type Library Version 1.0", that, among others, it contains the class "IWebBrowser2". This class happens to be called "MOZILLACONTROLLib.IWebBrowser2". But, once I have the Property Node or Invoke Node, I can't create the container from it (create control from its reference) neither place an empty ActiveX container and wire its reference to the Property Node.
I also tried registering the ActiveX Control, by typing "regsvr32 <control_name.dll>" in the command prompt, but nothing changes.
But this doesn't happen to me only with this particular ActiveX control. Every time I want to find in the list a certain ActiveX component after installing it, I can't find it, and I end up copying ActiveX container blocks from VI examples I found on the forums... One example is using AcroPDF ActiveX Control.
Any suggestion? Has anybody faced the same problem?
Regards,
Francisco
Attachments:
ActiveX Container.png ‏26 KB
Property Node.png ‏35 KB

Hello,
Probably you can
see the server in the pop-up menu because the server is not in the PC but is in
the registry. Remove the checkbox “Validate Servers” to see if the Mozilla
server appears. According to this LV help link...
http://zone.ni.com/reference/en-XX/help/371361G-01/lvhowto/creating_new_controls_in_a/
... looks like the server is not installed in the PC... or it’s not registered.

Unable to execute QEMU command 'qom-list': The command qom-list has not been found

I have been trying to get openstack working on the 2 Node Architecture - Controller (OL6.6) and Compute(OL.6.6). I am following the Oracle Openstack Installation Document but I keep getting the following error -
2015-03-26 20:32:13.662 8067 INFO nova.scheduler.filter_scheduler [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] Attempting to build 1 instance(s) uuids: [u'9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c']
2015-03-26 20:32:13.676 8067 INFO nova.scheduler.filter_scheduler [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] Choosing host WeighedHost [host: kvm4A.com, weight: 1.0] for instance 9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c
2015-03-26 20:32:33.586 8067 INFO nova.scheduler.filter_scheduler [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] Attempting to build 1 instance(s) uuids: [u'9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c']
2015-03-26 20:32:33.588 8067 ERROR nova.scheduler.filter_scheduler [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] [instance: 9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c] Error from last host: kvm4A.com (node kvm4A.com): [u'Traceback (most recent call last):\n', u' File "/usr/lib/python2.6/site-packages/nova/compute/manager.py", line 1328, in _build_instance\n set_access_ip=set_access_ip)\n', u' File "/usr/lib/python2.6/site-packages/nova/compute/manager.py", line 393, in decorated_function\n return function(self, context, *args, **kwargs)\n', u' File "/usr/lib/python2.6/site-packages/nova/compute/manager.py", line 1740, in _spawn\n LOG.exception(_(\'Instance failed to spawn\'), instance=instance)\n', u' File "/usr/lib/python2.6/site-packages/nova/openstack/common/excutils.py", line 68, in __exit__\n six.reraise(self.type_, self.value, self.tb)\n', u' File "/usr/lib/python2.6/site-packages/nova/compute/manager.py", line 1737, in _spawn\n block_device_info)\n', u' File "/usr/lib/python2.6/site-packages/nova/virt/libvirt/driver.py", line 2297, in spawn\n block_device_info)\n', u' File "/usr/lib/python2.6/site-packages/nova/virt/libvirt/driver.py", line 3704, in _create_domain_and_network\n power_on=power_on)\n', u' File "/usr/lib/python2.6/site-packages/nova/virt/libvirt/driver.py", line 3605, in _create_domain\n domain.XMLDesc(0))\n', u' File "/usr/lib/python2.6/site-packages/nova/openstack/common/excutils.py", line 68, in __exit__\n six.reraise(self.type_, self.value, self.tb)\n', u' File "/usr/lib/python2.6/site-packages/nova/virt/libvirt/driver.py", line 3600, in _create_domain\n domain.createWithFlags(launch_flags)\n', u' File "/usr/lib/python2.6/site-packages/eventlet/tpool.py", line 179, in doit\n result = proxy_call(self._autowrap, f, *args, **kwargs)\n', u' File "/usr/lib/python2.6/site-packages/eventlet/tpool.py", line 139, in proxy_call\n rv = execute(f,*args,**kwargs)\n', u' File "/usr/lib/python2.6/site-packages/eventlet/tpool.py", line 77, in tworker\n rv = meth(*args,**kwargs)\n', u' File "/usr/lib64/python2.6/site-packages/libvirt.py", line 738, in createWithFlags\n if ret == -1: raise libvirtError (\'virDomainCreateWithFlags() failed\', dom=self)\n', u"libvirtError: internal error: unable to execute QEMU command 'qom-list': The command qom-list has not been found\n"]
2015-03-26 20:32:33.592 8067 INFO nova.filters [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] Filter RetryFilter returned 0 hosts
2015-03-26 20:32:33.592 8067 WARNING nova.scheduler.driver [req-92279e25-f098-4a7a-b8d5-a75bc965a3d3 6e5fe2a1961a4b31921c37f0d2e74265 326a884b9db44e56a68e8a9761ffcf84] [instance: 9fb4d99c-a7f7-4cd2-bbbc-4056ac0e8f1c] Setting instance to ERROR state.
Any suggestions?
Thanks

Hi Avi,
The guide is for OL6 (see excerpt from page 5)
"A compute node is a system running Oracle Linux using KVM, or Oracle VM Server Release 3.3. You can download
installation ISOs of the latest version of Oracle Linux 6, or Oracle VM Server Release 3.3, from the Oracle Software
Delivery Cloud at:"
And although 1.0 release says OL6.5 and later I cannot find the OL7 pacakges on the public yum server. The only ones I can find are http://public-yum.oracle.com/public-yum-openstack-ol6.repo which is clearly OL6. I tried them on OL7 and the install fails.
[ol6_openstack10]
name=OpenStack 1.0 packages for Oracle Linux 6 (x86_64)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/openstack10/x86_64/
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
gpgcheck=1
enabled=1
[ol6_latest]
name=Oracle Linux $releasever Latest ($basearch)
baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/latest/$basearch/
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
gpgcheck=1
enabled=1
If you have an Oracle Openstack install running I'd love to hear how you did it and what you did to accomplish it.
Right now I'm running OL6.6 with a RDO icehouse packstack install and I'm running into problems mounting volumes.
Openstack will be awesome once I get it running
Thank you for any assistance.
Dave

Command not found error while executing a shell script

Hello,
I am a newbie to linux.I am attaching the code which gives me following errors..
error list:
1. no such file or directory enviornemnt
2. command not found
3. ambiguous redirectline
Script
cd $HOME/wkdir
rm /tmp/*.log
# source environment
. ./env
# Run the install script to setup the database
# Configure SH account
sqlplus "/ as sysdba" <<! > /tmp/perflab_install.log 2>&1
grant connect, resource, dba to SH;
alter user sh account unlock;
# create the fetch_n_rows procedure
sqlplus "$PERFLAB_USER" <<! >> /tmp/perflab_install.log 2>&1
drop index sales_time_bix;
drop index sales_time_idx;
create index sales_time_idx on sales(time_id) compute statistics;
-- fetch_n_rows: fetches 'n' rows from the specified statement --
CREATE OR REPLACE PROCEDURE fetch_n_rows(
stmt VARCHAR,
name VARCHAR,
nexec NUMBER := 1,
nrows NUMBER := 0,
debug BOOLEAN := FALSE)
IS
-- Local variables
curs INTEGER := null;
rc INTEGER;
nexec_it INTEGER := 0;
nrows_it INTEGER;
BEGIN
dbms_application_info.set_module('DEMO', name);
WHILE (nexec_it < nexec)
LOOP
curs := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(curs, stmt, DBMS_SQL.NATIVE);
rc := DBMS_SQL.EXECUTE(curs);
nrows_it := 0;
LOOP
IF (dbms_sql.fetch_rows(curs) <= 0 OR (nrows <> 0 AND nrows_it = nrows
THEN
EXIT;
ELSE IF (debug = TRUE)
THEN
DBMS_OUTPUT.PUT_LINE(nrows_it);
END IF;
END IF;
nrows_it := nrows_it + 1;
END LOOP;
DBMS_SQL.CLOSE_CURSOR(curs);
nexec_it := nexec_it + 1;
END LOOP;
dbms_application_info.set_module(null, null);
END fetch_n_rows;
show errors
# Start the workload
. ./start_workload.sh > /tmp/setup_perflab.log 2>&1
# Wait two minutes for workload to get going
sleep 120
# Modify snapshot interval
sqlplus -s /NOLOG <<EOF >> /tmp/setup_perflab.log 2>&1
connect / as sysdba
set head on
set feedback on;
set pagesize 40
rem -- event to allow setting very short Flushing interval
alter session set events '13508 trace name context forever, level 1';
rem -- change INTERVAL setting to 2 minutes
rem -- change RETENTION setting to 6 hours (total of 180 snapshots)
execute dbms_workload_repository.modify_snapshot_settings(interval => 2,-
retention => 360);
EOF
Note : start_workload.sh is also in the same directory..
Any help would be greatly appreciated.

Please put your script between "code" format delimiters.
http://wiki.oracle.com/page/Oracle+Discussion+Forums+FAQ
You can add the line "set -x" at the beginning of your script to see at which line it fails? I suspect the . ./env line.

I want to transfer a movie I have downloaded from itunes to my new IPAD. I have been on the itunes help menu, it tells me to look under 'devices' tab for IPAD. BUT there is no 'devices' tab and it does not list my new IPAD. Help!

I want to transfer a movie I have bought in itunes to my new IPAD. I have been trying to work how to do this for 3 days now. I have accessed all the itunes help and forums and wiki online. They all tell me to go to the DEVICES tab on itunes and select IPAD then sync. YUP seem simple, BUT there is not DEVICES tab listed on my itunes and it does not list IPAD. Years ago I set up my IPOD no problem and that is listed, but not the new IPAD. Can anyone help? I would love to be able to actually watch films on my IPAD!! thanks

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

Thinkpad T440s - ClickPad no longer working, not listed in /proc/...

This started earlier today. My clickpad used to work fine, now it's completely non-functional. I'm currently using a Logitech wireless usb mouse, which you'll probably see in dmesg&co below.
Some observations:
if I just boot and don't touch anything except entering my credentials into gdm to login to GNOME Shell, (not touching the mouse/clickpad), I don't have a pointer at all. Touching/clicking the clickpad does nothing. Neither device is in /proc/bus/input/devices. If I move my mouse, the pointer appears and works normally, and I see my Logitech mouse in /proc, but the clickpad still doesn't work.
Here's some output of various commands/files:
xorg log
dmesg
proc/bus/input/devices <-- clickpad not listed
xinput <-- clickpad not listed
lspci
lsusb
Here's some troubleshooting strategies I tried:
- Reboot
- Suspend, resume
- disable/re-enable clickpad in BIOS
- reinstall synaptics
- uninstall/reinstall laptop-mode-tools
- shutdown, remove battery, unplug, hold down power button for 2 mins (clear cmos?)
- weep/pray to Linus
- boot an Ubuntu live usb, confirmed clickpad is *not* working there.
- Update BIOS
- Tried reconnecting keyboard/trackpoint, wasn't able to access the connector, but it looked securely fastened
None had any effect.
I tried starting the synaptics daemon manually: syndaemon. But I get this: Unable to find a synaptics device.
I also tried removing/reloading the kernel module with modprobe, but I'm not sure which module is the right one. psmouse did not do the trick.
I looked through /var/log/pacman.log, to look for culprits, but the last major thing to be updated was systemd/linux on the 18th. The ClickPad was working fine this morning (suspend/resume worked fine). Specifically, it stopped working when I was in the car heading home for spring break. I had just compiled OpenJDK8 before I left, and installed "netbeans-devel". I suspended my laptop by closing the lid, got in the car. Reopened it, and then began to mess with Java 8. A suspend later and my clickpad was no longer working. I restarted, and it was working again. Then I suspended it for the rest of the trip. Upon getting home, it no longer worked and I haven't been able to get so much as a wiggle of the mouse pointer since then.
Anyone have any ideas?
Last edited by Everdras (2014-04-02 04:57:36)

Jcrash wrote:
Everdras wrote:
- weep/pray to Linus
Haha!
I had the same issue. Touchscreen worked fine out of the box but the trackpad/pointer was unresponsive.
Did you try using:
https://aur.archlinux.org/packages/xf86 … rackpoint/
On another note, I had a good experience with their hardware support. Cracked my touchscreen and jumped through the same hoops. Great turnaround time (<1week).
Alright, I've got my laptop fixed. Lenovo informs me that they replaced the motherboard. After putting my SSD back in, the touchpad works now! So it looks like it was definitely a hardware issue for me.
And yeah, lenovo support was incredible. They were very nice on the phone, didn't mind that I kept my hard drive, and they gave me 1-day shipping all over the place. I talked to them on the phone on the 28th @ 17:00 GMT-6, received my box on the 29th and sent it right back out with the laptop in it. They received it the 30th, fixed it the 30th, and it would've been back to me the 31st if that weren't a Saturday. So, I received it today.
Oddly, though, they accidentally sent me an (extra) repair box to my apartment- which I'm not at right now. /me shrugs.

Why is my BDC_CURSOR command not working to position the cursor?

Why is my BDC_CURSOR command not working to position the cursor? Here are the details regarding my issue.
I am writing a BDC to mass delete routing material assignments using transaction CA02. I am OK to navigate through the initial screen to go to the Header screen and from here I am OK to navigate to the Material Assignments screen. But once here, I cannot get the BDC_CURSOR command to take me into the list. Here are the commands I am using. Please let me know what I may try differently.
CA02 Material Assignment - Set position <-- this resets list of materials to correct position
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'MAPL-MATNR(01)'.    <-- this is not working to set the cursor into the list
PERFORM bdc_field       USING 'BDC_OKCODE' '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI'   '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR' 'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'   '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT' c_position.

Thank you for your reply.
I had used SM35 to record. However, I was not aware of the "create program" feature. I had commented out a section from my previous post which I have now added back (latest code below). But it still did not resolve the issue.
When I execute with dismode = 'N', I get back error message "No batch input data for screen SAPLCZDI 1010".
When I execute with dismode = 'E' (only show dynpros when error), it stops at the material selection screen without placing my cursor in the list. I can then MANUALLY click to set the cursor position in the list, MANUALLY click the trashcan, it then uses my BDC command to respond to the popup asking "Do you want to delete", still leaving me at the material selection screen. I can then MANUALLY click the green check (or enter), then it continues with the BDC to go back to the previous screen, and saves. But it still will not place my cursor in the material selection list (SAPLCZDI screen 1010).
Here is code used. It is the second section of code labeled "CA02 Material Assignment - Delete" that is not working.
CA02 Material Assignment - Set position
this code functions to position the desired material to first in screen list
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=ENT1'.
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
CA02 Material Assignment - Delete
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'MAPL-MATNR(01)'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=LOE'.             " trash can
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.
Acknowledge Pop-Up Screen
PERFORM bdc_dynpro      USING 'SAPLSPO1' '0100'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=YES'.
CA02 Material Assignment - Green Check OK
PERFORM bdc_dynpro      USING 'SAPLCZDI' '1010'.
PERFORM bdc_field       USING 'BDC_CURSOR'
                                'RC27X-ENTRY_ACT'.
PERFORM bdc_field       USING 'BDC_OKCODE'
                                '=BACK'.            " check mark
PERFORM bdc_field       USING 'RC27X-ENTRY_ACT'
                                 c_position.

Battery fails in X61 with FRU not listed in the recall list

The day before when my x61 battery went down to about 5%, I closed the cover to let the it sleep. After a while, when I want to charge back the battery, the light becomes yellow and keeps twinkling. The power manager says:"The battery has failed due to normal wear. The battery can not be charged. Replace the battery."
I doubt this battery failure is due to the product design, since I have not done any thing vital. I checked the website from Lenovo and found out there is a problem on x61 battery and now lenovo is recalling the battery. But unfortunately, my FRU is 42T4506 which is not listed in the recall list. I just called the customer service guy to ask if I can get the same service, but that guy is not polite at all and do NOT want to explain to me any thing but let me order a new battery. A new battery is toooooo expensive. I feel really bad on this situation and come here for help.
The battery recall website
Does anyone has the same problem? What should I do now? I checked the amazon and buy.com, there are several batteries with very low price. Can I trust those batteries?
Thanks,
Hongbo

Hello Dharmesh,
I am facing this issue, after upgrading the system from Windows 2012 to Windows 2012 R2 Datacenter. I have tried un-installing and re-installing the roles (RDS) multiple times, but still the sysprep'ed VMs are not listed.
I even tried creating a new fresh VM from the start and syspred'ed using the command line options, but still the VM is not getting listed.
One more observance is that, the 'RD Virtualization Host Server' displays the 'No of Virtual desktops' as '0' even though I have more than 50 VMs on Hyper-V. (It is not even showing the value as 1 for the new VM created).
I have all the roles (Web Access, Connection Broker, RDMS and Virtualization Host) installed on the same server.
Windows 7 Professional edition is used to create a VM, and the sysprep command works only with the below command line arguments.
sysprep.exe /generalize /oobe /shutdown
Please kindly help to resolve on the issue.
Thanks.

ICloud not listed in Edit smpt in Mail preferences

Hi all-I have been having issues with Mail lately. I am running Mavericks (latest version) and Mail is 7.3.
First it keeps asking me for my password. I have lost count the number of times I have reentered it! But it keeps on asking. I enter the password in the popup window that says the iCloud password is incorrect. Sometimes it accepts it and the mail downloads but other times it doesn't.
The other issue is that in Mail Preferences if I go to Edit smpt settings iCloud is not listed. Comcast is but not iCloud. It's listed on the first screen of Mail Preferences.
The other question I have is the Incoming Mail Server-it says (in faint letters, not highlighted) p01-imap.mail.me.com. Is this what it should say? Out going is iCloud (iCloud). No TLS Certificate. Under the Advanced tab it says authentication if Password. Again, iCloud is not listed on this screen.
I wasn't aware that I changed anything. I did do the 2 step verification for iCloud today but the password issue has been going on for over a week. Looking forward to getting this mess straightened out! Judy

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
          Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
          Keychain Access ▹ Preferences ▹ First Aid
If the box marked
          Keep login keychain unlocked
is not checked, check it.
Select
          Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain. Quit Keychain Access.

My tracks are not listed in order

my tracks are not listed in the correct order in the library and on my ipod they r playing out of order.

I really don't mean to dodge your question and take this thread in another direction, but I still would like to point out, in case you might not have realized, that iTunes now has gapless playback. That said, it really caps the usefulness of the Join CD Tracks feature. I understand that there may still be good reasons for using this, like if you have an older iPod that doesn't support gapless playback or a non-Apple portable player, etc. Still, I think it's worth mentioning that in the future, as your equipment changes and you can take advantage of proper gapless playback, you may find it annoying that you can't unjoin the tracks in a precise manner.
Join CD Tracks Command Is Dimmed
Joining CD Tracks
Adding songs from CDs to your library
Interestingly, the iTunes 7.x-related documentation says nothing about having to select contiguous tracks in order to use the Join CD Tracks command. I don't use this feature anymore since iTunes and iPod have gapless playback, but if I find that the old rules still apply, I will submit a request to update the newer KB articles.

Why are the iPhotos not listed in the finder?

why are the iPhotos not listed in the finder?

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

APEX_COLLECTION API not listed with others

Hello,
I was just wondering why the APEX_COLLECTION API was not displayed with the others here:
http://download.oracle.com/docs/cd/E14373_01/apirefs.32/e13369/toc.htm
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

There are default shortcuts for channel shortcuts that are not listed in Edit>Keyboard shortcuts.
You want to use other keyboard shortcuts than the ones listed here:
Photoshop Help | Default keyboard shortcuts
To load the luminosity of a layer as a selection would be Alt+Ctrl+2 or Option+Command+2

Mail: "Message contains NUL characters," not listed in ANY folder

On occasion, I will hear a new message sound in Mail, and I will see the little progress indicator showing an incoming message, but there is no trace of it in the inbox. If I am there to see the incoming notice and remember the message content, I can search for the message content in Spotlight and it will open the message. But if I then click "Show in Mailbox," it opens a Mail list window that is empty and labeled "No mailbox." If I try to move the message by dragging its title bar icon, nothing happens. If I try to use the Move command, I get "Append failed: Message contains NUL characters." If I command-click the message title bar, it tells me it's inside the inbox, but again it won't list it in the inbox. The physical message file itself resides in the Inbox folder in the Mail folder on the desktop. Rebuilding the mailbox does not make it appear in the list.
I've found various workarounds for shaking Mail into realizing the message exists and listing it, but my real question is this: The above is when I notice that a message has come in but is not listed. But what about messages that come in and are not listed, and I do not know they are there because I wasn't around when they came in?
How can I use a mail rule or other tool to locate messages that are not listed in any mailbox, or contain NUL characters?
I would really like to know if I've missed any important messages because they never appeared in the list, even though they exist somewhere.
Mail will not allow me to set up a mail rule on folders when no folder is specified.

One thing I can suggest you try is to move the Envelope Index files from your User Library>Mail Folder>MailData.
Quit Mail first, navigate to those files and move them to the desktop. Restart Mail. It should give a message that you need to Import your mail. Click continue. That should reindex all your mail messages.
This should help with wrong message counts, ghost messages, and hidden message problems.
Once Mail is running and OK, you can trash those files.

ActiveX Commands not listed

Similar Messages

Maybe you are looking for