Insert ActiveX Object - not in list

Hi, guys.
After one time, I'm not able to install by myself ActiveX controls and embed these controls into ActiveX containers yet. I refer to ActiveX controls that can be embedded into ActiveX containers, not those used to instantiate other applications.
I want a certain ActiveX Control to be displayed in an ActiveX Container on the Front Panel. In this particular case, it's a Mozilla Firefox ActiveX Control. According to http://forums.ni.com/t5/LabVIEW/activex-firefox-and-mozilla/td-p/356235 (see message 5), after getting the component from the link provided and installing it, I should be able to insert onto the empty ActiveX Container by clicking over it and selecting "Insert ActiveX Object...". In this case, "MozillaBrowser class" should appear in the list, but not.
However, if I place a Property Node or Invoke Node without reference on the Block Diagram, click on it, then "Select Class" -> "ActiveX" -> "Browse", I find the class "MozillaControl 1.0 Type Library Version 1.0", that, among others, it contains the class "IWebBrowser2". This class happens to be called "MOZILLACONTROLLib.IWebBrowser2". But, once I have the Property Node or Invoke Node, I can't create the container from it (create control from its reference) neither place an empty ActiveX container and wire its reference to the Property Node.
I also tried registering the ActiveX Control, by typing "regsvr32 <control_name.dll>" in the command prompt, but nothing changes.
But this doesn't happen to me only with this particular ActiveX control. Every time I want to find in the list a certain ActiveX component after installing it, I can't find it, and I end up copying ActiveX container blocks from VI examples I found on the forums... One example is using AcroPDF ActiveX Control.
Any suggestion? Has anybody faced the same problem?
Regards,
Francisco
Attachments:
ActiveX Container.png ‏26 KB
Property Node.png ‏35 KB

Hello,
Probably you can
see the server in the pop-up menu because the server is not in the PC but is in
the registry. Remove the checkbox “Validate Servers” to see if the Mozilla
server appears. According to this LV help link...
http://zone.ni.com/reference/en-XX/help/371361G-01/lvhowto/creating_new_controls_in_a/
... looks like the server is not installed in the PC... or it’s not registered.

Similar Messages

Inserting ActiveX Objects

I have installed Labview 64 bit onto my computer and downloaded the full 4Gb driver compilation. I am trying to use labview to run a motor control for my TPZ001 Thorlabs piezo controller. When I go to "Insert ActiveX Object", in the list of controls MG17Motor is no where to be found. This is the control I need for my motor and from what I gathered from my colleages this control should appear after having installed the Thorlabs ATP config/user CD application. I have also plugged the piezo controller into my computer's USB and got the successfully installed drivers message. Even after the 4Gb driver installation the motor control in activeX cannot be found. Am I overlooking something simple? The driver set installed in \Program Files (x86)\ even though everything is 64 bit, when I tried to change the install directory it said that my choice of \Program Files\ was invalid.
Where awareness goes, energy flows.

nathand wrote:
There's more than one way to use an ActiveX object in LabVIEW. I may not use the correct ActiveX terminology, but there's a difference between an ActiveX control versus an ActiveX class. Only ActiveX controls can be inserted on the front panel. You can get access to an ActiveX class by using the "Automation Open" primitive found in the Connectivity->ActiveX palette. Create a constant for the Automation Refnum input, then right-click on the constant and choose "Select ActiveX Class..." See if you can then open your component there.
Hi nathand, can you explain a bit further what you mean? I have attached my code if you weant to have a look at what it is supposed to do.
Attachments:
READERxp.vi ‏39 KB

TopLink does not generate SQL statements for inserting new objects

TopLink does not generate SQL statements for inserting new objects. Why?
Thanks in advance...

Please see the response in
Why does not unitofwork.commit write data to the database?
Regards,
Chris

Unable to move object. Change lists were not part of the same import

Hi All
I am facing a strange problem.
We have applied SP16 patch on our XI box and imported all the scenario objects and design objects which were exported as .tpz file .
After importing scenario object,all objects moved to a new node 'XI 3.0 Import' in change list and when I tried to activate this change list it gave me an error
<b>"Unable to move object. Change lists were not part of the same import"</b>
even if I try to move it Standard change list, it gives me same error.
Any solution?

Hi,
Hope you are activiating the complete change list. You get this error because you trying to activate a part of the change list.
Please look at the URL:
Importing to QA box
Integration Directory (ID) transport to Prod system
Regards
Vijaya

Getting "Connect Timedout or auth error" when usging UltraVNC ActiveX object in LV 2010

Hi all,
I am trying to use a VNC viewer activeX object (from: UltraVNC ActiveX Viewer) in Labview to start a remote desktop / VNC session. The example supplied along with the control is a HTML page with javascript invoking the object.
Initially, I tried using the object by directly inserting it into an ActiveX container, but it never worked. So, I altered the design and inserted a WebBrowser object in the ActiveX container and used the Navigate2 method to open the local .htm file (that contains the exact same code as shown in example, but with altered Server address to match my local condition). Yet, even this method fails. As soon as the control passes to the Browser:Navigate2 method, I get an error stating "Connect method failed as it timed out or authentication failure". Just to make sure there is no error with the html file itself, I opened the file in Internet Explorer and it works without issues, after first allowing the ActiveX to run (throws up a banner on top of the page saying "it is unsafe to run the activeX" (IE's security measure).
Did anyone use this before? I just want the VNC Viewer functionality in Labview, so any alternate suggestions are welcome too.
Regards,
Sri Ved

Tested the solution, but did not work. Attached is the screen shot of the error, if it helps. Also, I ensured all the variables under ActiveX and Scripting are set to "Enable" in IE Security Settings (listed below) in both the Internet and Intranet categories. Is there something obvious that I am missing?
Regards,
Sri
Enabled:
  Allow previously unused ActiveX controls to run without prompt
  Allow Scriptlets
  Automatic prompting for ActiveX controls
  Binary and script behavior
  Display video and animation on a webpage that does not use external media player
  Download signed ActiveX controls (not secure)
  Download unsigned ActiveX controls
  Initialize and script ActiveX contrtols not marked as safe for scripting
  Only allow approved domains to use ActiveX without prompt
  Run ActiveX controls and plug-ins
  Script ActiveX controls marked safe for scripting*
  Scripting:
  Allow programmatic clipboard access
  Allow status bar updates via script
Allow websites to prompt for information using scripted windows
Enable XSS Filter
Scripting of java applets
Attachments:
ActiveX_VNC_Error.jpg ‏134 KB

Acrobat 7.0 ActiveX Object example code in Lookout

Help folks!
I'm trying to set up the Adobe Acrobat 7.0 Browser Document ActiveX Object under Lookout 6.0 but it doesn't work. My goal is to display a pdf document by lookout.
What should I set by Property Browser...?
What should I set by Property Pages...?
What should I set by Value Property:?
What means the term "Property" in this kind of objects?
Is there an example code I can get?
Any suggestion will be appreciated.
Thanx.

I don't know of a FREE ActiveX control for MS Word. However, if you have MS Word installed on the same computer, you can use MS Internet Explorer ActiveX Control to view Word documents.
But before we do that, we have to make sure that MS Word is set to open documents in the "same window." This basically opens a DOC file in Internet Explorer itself rather than launching a new MS Word window and then opening the DOC file in it. To set this (if it isn't already):
1. Launch Windows Explorer.
2. From the Tools menu, select "Folder Options"
3. Click the "File Types" tab.
4. From the listing of "Registered File Types," select "Microsoft Word Document," (you can get to it fast by typing "DOC"); click Advanced.
5. Click the "Browse in same window" check box -- this toggles whether a Word document is launched outside of Internet Explorer.
6. Click OK to close the dialog boxes.
NOTE: if the DOC still opens in a new MS Word window (and not IE), go back and toggle the check-box.
In Lookout, use the Lookout Webbrowser control (which is nothing but MS IE Control). Specify the file path to the DOC file as the URL. I am attaching a process file which does this using a TextEntry object.
Hope this helps.
-Khalid
PS: not sure when this changed but we can't directly attach .L4P files to a post.. what a pain! Please take a minute to add your weight to this request:
http://forums.ni.com/ni/board/message?board.id=130&message.id=2142
Message Edited by Khalid on 12-28-2005 02:55 PM
Attachments:
doc_process.zip ‏4 KB

Why after I add a object to a list, the whole list changes?

I tried to call the add method of ClientList from a jsp webpage,
by looking at the log file, i found that for the 2nd time insert an Object into clientlist (say
client 1 is: IPAddress= 167.30.22.33
client 2 is IPAddress=167.30.22.44), what i get from the system log is that I have two
167.30.22.44 in the list, the first one is gone,
after I add the third item, the list just contains three identical third item, the former two are gone,
What 's wrong with my code? From the system log, I know that the parameters passed to the method clientlist.add are correct.
thank you.
My code is like this :
public class ClientList {
ArrayList<Client> listitems = null;
int numberOfItems = 0;
public ClientList()
          items = new HashMap<String, ClientListItem>();
          listitems = new ArrayList<Client>();
public synchronized void add(
Client cl) {
if (items.containsKey(cl.getIPAddress())) {
               ClientListItem clitem = (ClientListItem)items.get(cl.getIPAddress());
               clitem.incrementQuantity();
} else {
               System.out.println("clist.add called: " + cl.getIPAddress() + "\n");
               ClientListItem newItem = new ClientListItem(cl);
               items.put(cl.getIPAddress(), newItem);
               listitems.add(cl);
               for (Iterator i = listitems.iterator(); i.hasNext(); )
                    Client clt = (Client)(i.next());
                    System.out.println("after adding : " + clt.getIPAddress() + "\n");
}

I'm willing to bet that what is happening here goes as follows:
// Step 1: Create a client 1 object
// Step 2: Call add with this client object creating a string key with a client value
// Step 3: redefine the data in the first client object with the data for the second
             // In this step you probably did not create anew client object, but simply
             // changed the data in the original
// Step 4: Call add with the "redefined" client object comparing the string key with
             // some data from the client, determining it is not in the list adding it againWhat the above does (if this is the way you are doing it) simply places the same client
object into the hash twice with two different keys. And in step 3, by changing the original object,
you also changed the object already in the hash, because as already said, they are the same object.
Edit: And nevermind, jverd already said this. ;-)

Variant Input Parameters with ActiveX Objects

I've created an ActiveX library that exports a variety of objects using Visual C++ Version 6.0. I'm testing the methods and properties of these objects using both LabVIEW and Visual Basic clients. The problem I'm facing is that when testing under LabVIEW, I can't access methods that expect a VARIANT input parameter. The declaration in C++ of one object's such method looks like this:
void CChassis::Configure (VARIANT config, int rate);
I can create the ActiveX object with both LabVIEW and Visual Basic. I can invoke methods that do not use VARIANT input parameters using both as well; but, when I create a second ActiveX Object (a CConfiguration) and use the LabVIEW Variant operator, my attempt to invoke Configure fails with a "No Such Interface (E_NOINTERFACE)" error. The invocation fails identically if I wire the CConfiguration directly to the Variant input, as well. If I instead create a constant VARIANT as an input parameter, my Configure method gets called, although the method recognizes that I passed an invalid object.
Using Visual Basic I can invoke the Configure method without problems while encapsulating a CConfiguration object within a Variant.
So my question is, have I found a LabVIEW error, or is my approach flawed? If my approach is flawed, where have I gone wrong? Thanks in advance! I'm using LabVIEW version 7.0.

Hi,
Have you tried to put in plain data or an object reference into your variant parameter?
I think plain data should work... for object references i don't know.
Some time ago, i also coded a small activex library, where i passed object references by parameters in delphi. I did not use variant parameters, but the real interfacedeclaration types (like IMyObject**). This worked fine. I also uses "dual" interfaces for the objects, which get passed by parameter. But i don't really know if this is helpfull for vb.
Finally, you can also use a workaround:
For each of your Objects, that you want to use from LabView and which you want to pass by a parameter, you
insert an new Property "int32 Object_Handle".
When an Object gets created, it ask a "ObjectHandleManager" (gets written by you) to get an own unique Object_Handle which it stores into its property "Object_Handle".
The ObjectHandleManager generates an new Object Handle and memorizes the Handle assoziated with the calling object's reference.
Now, at each time, when you want to pass a object reference to a library function of your self, you can pass the Object_handle as an integer value. In the called function, you can ask your ObjectHandleManager for the real ObjectReference.
But thats not a very comfortable workaround.

ActiveX Object references - casting to a specific instance

I have some ActiveX controls that are used to interface between a vendors hardware. The activex controls are quite heavy weight in that at any one time there should only be one instance of each of the type of controls within the program.
What I want to do is keep the activex controls in the top level vi and pass references to sub-vi's in order to do property changes or method calls on the activex objects.
When I create an activex reference control in a sub vi it doesnt seem to know what methods/propertys are available on that reference. I beleive it needs casting/converting to a reference that will allow LabView to recognize the reference type but im not sure how to do this.
Thanks
TMC

Your automation refnums are probably not linked to the ActiveX control. Try this... select a property node in your main VI's diagram that has the desired ActiveX control attributes displayed and then select Edit>>Create SubVI from the menu. The automation refnum in the subVI will be linked to the ActiveX control and will work the way you want it to. Copy this to your other subVIs and the property nodes will start behaving. The other way to link the automation refnums is to right-click on them and choose select ActiveX class and then browse to your control.
-Jim

How To Insert A object into Conext

Hi Techies,
I have 8 tables in my designer
and I have two contexts at designer level
And how to insert a object into a context that is not referencing any table.
For Example I have an object like "rownum" (Which should must be added at Universe level only not at report level). Here this object is not referencing any table and I want this to be used in a query where the remaining objects are coming from the context..
Thanks in Advance..

Double-click the Objects and click the TABLES button and select the table you want to associate the object to for the context to work properly (see below).
Regards,
Ajay

Recent loss of embedded QT movies on many page for IE7 using ActiveX object

I have many pages that allow you to select from 4 video formats including QT .mov. An example is at http://www.cwdjr.net/video4/cancanL.php . The QT object uses ActiveX when on IE only(I use Windows conditional comments) and an ordinary object for most other browsers. Until sometime very recently all of these pages worked when you select the QT file. Now QT works on none of them. I suspected the problem might be due to a very recent Windows XP update which is a large one including .NET updates and other things(K8951847) X 86. I was able to restore to a day before this update, but this did not solve the problem. Of course some portions of some updates can not be removed be restoring to an earlier time, so the result does not prove the update was not at fault.
The involved pages are mostly written in php on the server, so you will not be able to see very much by viewing the source code. To make the problem more simple to view, I made a test page for QT only and with the ActiveX object only. Thus this test page can not be viewed on most browsers that do not support ActiveX. The test page is at http://www.cwdjr.info/broadbandMedia/formatsAX/qtmovtest2.php . Since I serve pages as valid xhtml 1.1 using the correct mime type application xhtml+xml, no IE browser can view the page, since no IE browser can support xhtml served properly. Thus I have a php include at the very top for header exchange between the browser and server. If this says the page does not support the mime type for xhtml, then php using regular expressions, etc is used to rewrite the page as html 4.01 strict for the outmoded browser. Thus don't be surprised if you find some pages in xhtml and others in html when you check properties.
The ActiveX object used for QT on the test page is below:
QT MOV
(CLICK ABOVE LINK IF NO PLAYER)
<object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" width="400" height="295" codebase="http://www.apple.com/qtactivex/qtplugin.cab">
<param name="autoplay" value="true" />
<param name="controller" value="true" />
<param name="kioskmode" value="true" />
<param name="src" value="http://www.cwdjr.info/movie/cancan.mov" />
</object>
Once the page comes up on IE7, it is rather slow to respond. Then it gives:
"Web site wants to install the following ActiveX control: 'Quick Time' from 'Apple Inc'".
If you do try to install, nothing happens. In contrast to my regular pages, I added the code show above just before the start of the object. Clicking this on will bring up the QT video, but of course it is not embedded on the desired page. This may work as a temporary fix for IE. I likely can hide it from other browsers by enclosing it in Microsoft conditional comments.
I would be interested if anyone else has had such a problem recently or any ideas concerning this strange response on IE7. I am talking about viewing the page on the server. Since this is a php page it can be viewed locally only if you have a server installed on your computer and I do not. The pages with the first url example given above have operated well on IE7, Firefox, Opera, Safari for Windows, Flock, K-Meleon, Google Chrome and SeaMonkey. There are a few players that have some issues with some of the formats, but this and the fact that some players may not be installed is the reason for offering the video in 4 formats. I sometimes offer high broadband versions as well as low broadband versions.
It seems I spend more time correcting IE issues than for all of the other mentioned browsers combined.

Thanks for the reference. I use nearly no JS anymore, since it often causes problems with true xhtml served properly even when you use external script files. Often one can use php script on the server and avoid these problems. When one serves as true xhtml using the correct mime type of application/xhtml+xml, the page is parsed with a very strict xml parser rather than a loose-as-a-goose html parser. (If one serves a page written in xhtml code as mime text/html, as is incorrectly done perhaps 99% of the time, you are using only html, not xhtml, and are fooling only yourself. The page is parsed as html instead of xhtml.) The xml parser has to be very strict to account for any possible xml content. Even a single, or even several, errors often will not prevent a html page from showing, but even a single error on an xhtml page served properly will often get an error report from the xml parser rather than a view of the page. One of the most laughable examples of misunderstanding of this issue is the home page of Microsoft. It claims to be xhtml. However it is served as text/html and thus would be better written in html 4.01 in the first place. Moreover, if you validate the page as xhtml at w3c, you find hundreds of xhtml errors. If Microsoft served their home page properly as application/xhtml+xml it of course would not work on any IE browser, at least through IE7, since none of these IE browsers can handle true xhtml. In addition the page likely would not show up on any browser if served as true xhtml until all of the hundreds of xml and other errors on the page were corrected. Instead, one likely would get a very long error report rather than a view of the page.
Back to JS, document.write will not work in properly served xhtml, because it easily could produce code with XML errors. For instance it might produce code that contains an unclosed tag, which is a major xml error that can cause an xml device to malfunction. The xml parser thus rightly finds document.write as an error and prevents viewing of the page. However one often can generate the same code as document.write would produce on a browser with php on the server. The finished code is what gets downloaded to the browser, so the xml parser can check everything in the finished code rather than quess what a JS document.write might produce. And don't think you can sweep document.write under the rug by using an external JS file. The very strict xml parser finds it.
Of course embed has never been a w3c tag, but rather is a bad hangover from the browser war era, a gift of Netscape. No page that includes embed can validate as w3c xhtml or xml of any flavor, at least through xhtml 1.1. However the page may work, despite the error, if server as text/html.
All I know is that something has happened recently that has caused my problem to surface. It likely has to do with some change in the XP OS or IE browser. I have tried viewing several pages written by others that use many types of code for .mov, and all of them I have viewed that use an ActiveX embed for the benefit of IE now have the problem I mentioned. If anyone else with XP and nearly all updates, including the very recent one I mentioned, and the most recent version of QT has had this problem, I could be more confident that the problem comes from an external source. If not, it is still possible the sudden change could be something concerning a specific issue that has developed in my computer.
Again, thanks for the JS reference. Some of this likely can translate into php so I can compare how the JS and php server script I am using relate.

ORA-01007 variables not in list

Hello all
I am trying to run a full load
n changed some mapping that is imported from another m/c
Two mappping r giving this error ORA-01007 variables not in list.
Severity Timestamp Node Thread Message Code Message
ERROR 8/21/2012 11:02:00 AM node01_DMMINFORZ2 READER_1_1_1 RR_4035 SQL Error [
ORA-01007: variable not in select list
Database driver error...
Function Name : Fetch
SQL Stmt : SELECT AP_INVOICE_PAYMENTS_ALL.ACCOUNTING_DATE, AP_INVOICE_PAYMENTS_ALL.AMOUNT, AP_INVOICE_PAYMENTS_ALL.INVOICE_ID, AP_INVOICE_PAYMENTS_ALL.INVOICE_PAYMENT_ID, AP_INVOICE_PAYMENTS_ALL.LAST_UPDATED_BY, AP_INVOICE_PAYMENTS_ALL.LAST_UPDATE_DATE, AP_INVOICE_PAYMENTS_ALL.CREATED_BY, AP_INVOICE_PAYMENTS_ALL.CREATION_DATE, AP_INVOICE_PAYMENTS_ALL.DISCOUNT_TAKEN, AP_PAYMENT_SCHEDULES_ALL.PAYMENT_NUM, AP_PAYMENT_SCHEDULES_ALL.DUE_DATE, AP_INVOICES_ALL.INVOICE_NUM, AP_AE_HEADERS_ALL.SET_OF_BOOKS_ID, AP_INVOICES_ALL.INVOICE_CURRENCY_CODE,
AP_INVOICES_ALL.VENDOR_ID,
AP_INVOICES_ALL.VENDOR_SITE_ID, AP_INVOICES_ALL.INVOICE_DATE, AP_INVOICES_ALL.INVOICE_TYPE_LOOKUP_CODE, AP_INVOICES_ALL.TERMS_ID, AP_PAYMENT_SCHEDULES_ALL.PAYMENT_METHOD_LOOKUP_CODE, AP_PAYMENT_SCHEDULES_ALL.PAYMENT_STATUS_FLAG,
AP_INVOICES_ALL.INVOICE_RECEIVED_DATE,
AP_INVOICES_ALL.CREATION_DATE INVOICE_CREATION_DATE,
AP_INVOICES_ALL.EXCHANGE_RATE, AP_INVOICES_ALL.ORG_ID, AP_INVOICES_ALL.INVOICE_AMOUNT, AP_CHECKS_ALL.BANK_ACCOUNT_ID, AP_CHECKS_ALL.CHECK_DATE, AP_CHECKS_ALL.CHECK_NUMBER, AP_CHECKS_ALL.CLEARED_DATE, PO_HEADERS_ALL.SEGMENT1, PO_HEADERS_ALL.START_DATE, AP_AE_LINES_ALL.AE_LINE_ID, AP_AE_LINES_ALL.AE_HEADER_ID, AP_AE_LINES_ALL.AE_LINE_NUMBER, AP_AE_LINES_ALL.CODE_COMBINATION_ID, AP_AE_LINES_ALL.ENTERED_DR, AP_AE_LINES_ALL.ENTERED_CR,
AP_AE_LINES_ALL.ACCOUNTED_DR,
AP_AE_LINES_ALL.ACCOUNTED_CR,
AP_AE_LINES_ALL.GL_SL_LINK_ID,
AP_AE_LINES_ALL.LAST_UPDATE_DATE,
AP_CHECKS_ALL.LAST_UPDATE_DATE,
AP_PAYMENT_SCHEDULES_ALL.LAST_UPDATE_DATE,
AP_INVOICES_ALL.LAST_UPDATE_DATE,
AP_INVOICES_ALL.SOURCE,
AP_INVOICES_ALL.PROJECT_ID,
AP_INVOICES_ALL.TASK_ID,
AP_INVOICES_ALL.EXPENDITURE_TYPE,
AP_INVOICES_ALL.EXPENDITURE_ORGANIZATION_ID
FROM
AP_INVOICE_PAYMENTS_ALL, AP_CHECKS_ALL, AP_PAYMENT_SCHEDULES_ALL, PO_HEADERS_ALL, AP_INVOICES_ALL, AP_AE_LINES_ALL, AP_AE_HEADERS_ALL
WHERE AP_INVOICE_PAYMENTS_ALL.INVOICE_ID=AP_PAYMENT_SCHEDULES_ALL.INVOICE_ID AND AP_INVOICE_PAYMENTS_ALL.PAYMENT_NUM = AP_PAYMENT_SCHEDULES_ALL.PAYMENT_NUM AND
AP_INVOICE_PAYMENTS_ALL.CHECK_ID=AP_CHECKS_ALL.CHECK_ID AND
AP_INVOICE_PAYMENTS_ALL.INVOICE_ID=AP_INVOICES_ALL.INVOICE_ID AND
AP_INVOICES_ALL.ACCTS_PAY_CODE_COMBINATION_ID IS NOT NULL AND
AP_INVOICE_PAYMENTS_ALL.INVOICE_PAYMENT_ID=AP_AE_LINES_ALL.REFERENCE9 AND
UPPER(AP_AE_LINES_ALL.REFERENCE6)='AP PAYMENTS' AND
AP_AE_LINES_ALL.AE_LINE_TYPE_CODE='LIABILITY' AND
AP_INVOICES_ALL.PO_HEADER_ID=PO_HEADERS_ALL.PO_HEADER_ID(+) AND
AP_AE_HEADERS_ALL.AE_HEADER_ID = AP_AE_LINES_ALL.AE_HEADER_ID AND
AP_INVOICE_PAYMENTS_ALL.CREATION_DATE > TO_DATE('01/01/1997 00:00:00', 'MM/DD/YYYY HH24:MI:SS')
Oracle Fatal Error].
N same for SDE_ORA_GLJournal.
I am importing from Inforamatica 8.6.1
to 9.0.1
Please give me solution as soon as possible..

I dont think we can import informatica objects (Mapping,Session ,Workflow etc) from lower version to higher version.
Informatica old version repository should follow by upgrade process by higher version.
Hope this helps

Object Services attachement list

From FB03, I am able to view archived images from Environment==>additional assignments==>object links==>attachment list.
However, when I am using the Object Services==>attachment list the images does not display. Any ideas why?
I have the following authorization objects.
C_DRAD_OBJ activity 03, document type *, Linked SAP Object *, Status *.
S_WFAR_OBJ activity (01,02,03), Document type *, Object Type *.
Any ideas why from one path it works but not the other?
Thanks,
Christina

Hi, Christina
plz go through this
Graphical Display
You can display existing assignments of material or infrastructure objects graphically on the relevant tab pages by choosing the Graphical Displaypushbutton.
Functions from the SAP Graphics component are used for the graphical display. For more information, see SAP Library under SAP NetWeaver Library ® SAP NetWeaver by Key Capability ® Application Platform by Key Capability ® ABAP Technology ® UI Technology ® Frontend Services ® SAP Graphics
1.      You are on the initial screen of the document display function (transaction FAIR03). Enter your selection criteria.
If you do not make any entries here, all documents are selected.
2.      Choosing excute with quick info text Execute takes you to a list of the accounting documents. You can analyze the results in various ways.
       Document Line Items displays the line items for the selected document in the lower screen area.
You can select multiple documents.
       Source Document takes you to the source document (such as the invoice). From there you can navigate to the follow-on documents.
        Accounting Document displays the underlying accounting document.
         To close the lower screen area, choose with quick info Close List.
Note: you have to check wether you have defined 'valution area' and tick indicator 'additional object type'
rgds
Ben

Error : OBJECT NOT SENT

Hi Experts,
I am new to ABAP..
I am facing one dump with the message "OBJECT NOT SENT" working with User Exit only in Production Server.
Kindly help.

Hi ..
Here it is...
ABAP runtime errors    RAISE_EXCEPTION
       Occurred on     07.02.2007 at 10:55:17
>> Short dump has not been completely stored. It is too big.
Exception condition "OBJECT_NOT_SENT" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
A RAISE statement in the program "SAPLSOA2 " raised the exception
condition "OBJECT_NOT_SENT".
Since the exception was not intercepted by a superior program
in the hierarchy, processing was terminated.
Short description of exception condition:
Object was not sent
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"RAISE_EXCEPTION"
"SAPLSOA2 " or "LSOA2U01 "
"SO_OBJECT_SEND"
or
"SAPLSOA2 " "OBJECT_NOT_SENT"
or
"SAPMV45A " "OBJECT_NOT_SENT"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
   To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
   To obtain this, call the system log with Transaction SM21
   and select the "Print" function to print out the relevant
   part.
3. If the programs are your own programs or modified SAP programs,
   supply the source code.
   To do this, you can either use the "PRINT" command in the editor or
   print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
   or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "secerpa2"
Network address.......... "10.20.1.151"
Operating system......... "Windows NT"
Release.................. "5.0"
Hardware type............ "3x Intel 80686"
Database server.......... "SECERPP1"
Database type............ "ORACLE"
Database name............ "PK1"
Database owner........... "SAPR3"
Character set............ "English_United State"
SAP kernel............... "46D"
Created on............... "Jul 25 2006 15:00:57"
Created in............... "NT 4.0 1381 Service Pack 5 x86 MS VC++ 12.00"
Database version......... "OCI_805_SHARE__OCI_7_API "
Patch level.............. "2265"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "Windows NT 4.0, Windows NT 5.0, Windows NT 5.1,
Windows NT 5.2, , System build information:,
, LCHN : 844749"
User, transaction...
Client.............. 200
User................ "SG005"
Language key........ "E"
Transaction......... "VA22 "
Program............. "SAPLSOA2 "
Screen.............. "SAPMV45A 4001"
Screen line......... 61
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLSOA2 " in
"SO_OBJECT_SEND".
The main program was "SAPMV45A ".
The termination occurred in line 1264
of the source code of program "LSOA2U01 " (when calling the editor 12640).
Source code extract
012340     PERFORM SOOD_UPDATE(SAPFSSO0) USING OBJECT_ID
012350                                CHANGING OBJECT_HD
012360                                         RCODE.
012370
012380
012390
012400
012410   ************************************************************************
012420   * Only now it is possible to invoke some sap object with the method
012430   * "RECEIVE" since the office object SOFM exist on the data base only
012440   * after the SOFM_INSARR abaove (at least for sure)
012450   ************************************************************************
012460     IF OBJECT_RECEIVER_SIZE > 0.
012470       PERFORM INVOKE_OBJECTS TABLES OBJECT_TABLE
012480                              USING OFFICE_OBJECT.
012490   *   * for object which could not receive this document set status
012500       PERFORM SET_OBJECT_FAILED TABLES OBJECT_TABLE
012510                                        RECEIVER_TABLE.
012520     ENDIF.
012530   *----
012540   * 14A.fill receiver list for export                                    *
012550   *----
012560   * move all receiver who are noz in receiver table because of an error
012570   * into receiver table for retransfer
012580     PERFORM PREPARE_RECLIST_FOR_RETURN TABLES RECEIVERS
012590                                               RECEIVER_TABLE
012600                                        USING SENT_TO_ALL
012610                                               F_RESUB_SENT.
012620     IF F_OBJECT_NOT_SEND = ON AND
012630        F_RESUB_SENT = OFF.
      RAISE OBJECT_NOT_SENT.
012650     ENDIF.
012660   *----
012670   * only if realy at least one recipient go the object make the binding *
012680   * in case an binding could not be done the corresponding won't appear *
012690   * anymore in the table APPLICATION_OBJECT                              *
012700   * binding will be done only for new documents
012710   * 40C: If not object is given it will be look whether some obejcts are
012720   * published by application
012730   *----
012740   * IF SIZE-APPL_OBJECT LE 0.                               "note 313853
012750   *    PERFORM LOOK_FOR_PUBLISHED_OBJECTS TABLES APPLICATION_OBJECT
012760   *                                       USING SIZE-APPL_OBJECT.
012770   * ENDIF.
012780     IF SIZE-APPL_OBJECT GT 0              AND
012790        ( SEND_PROC = NEW_OBJ_NO_FILE OR           " new document
012800          SEND_PROC = NEW_OBJ_WI_FILE    ).
012810       PERFORM BIND_OBJECTS TABLES APPLICATION_OBJECT
012820                            USING OFFICE_OBJECT_KEY
012830                                   ALL_BINDING_DONE.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 0                             SY-INDEX 1
SY-TABIX 1                             SY-DBCNT 1
SY-FDPOS 2550                          SY-LSIND 0
SY-PAGNO 0                             SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+....4
OBJECT_TABLE
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 40
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 80
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 120                                ##        ####
                               22222222
                               0000000
OFFICE_OBJECT
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 40
                               22222222222
                               00000000000
ERO2                           ERO2
                               4543222222222222222222222222222222222222
                               52F2000000000000000000000000000000000000
... + 40
                               222222222222222222222222222222
                               000000000000000000000000000000
SYST                           ########################d###############
                               0000000000000000000000006000000000000000
                               1000000010001000000010004000000000000000
... + 40                      ####ö     ##############################4###
                               0000F00000000000000000000000000000003000
                               1000690010000000100000000000000000004D00
... + 80                      ################ÿ#######################
                               0000000000000000F00000000000000000000000
                               0000000000000000F00000000000000000000000
... + 120                      ########################################
                               00000000
                               0000000
OBJECT_TABLE[]                 Table[initial]
                               0000FFFD
                               0000FFFF
RECEIVER_TABLE[]               ############################ ###########
                               0000000000000000000000000000210000000000
                               00000000000000000000000041300C0000001000
... + 40                      ############d###ÿÿÿÿ4########### â÷I####
                               0000000000006000FFFF3000000000002EF40000
                               4000400040004000FFFF4D007000430002790000
... + 80                      ############################Ì!##
                               0000000000000000000000000000C200
                               0000000000000000000000000000C100
RECEIVER_TABLE                                   SR007
                               2222222222222222225533322222222222222222
                               0000000000000000003200700000000000000000
... + 40
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 80
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 120
                               22222222
                               0000000
EWSP                           EWSP
                               4555222222222222222222222222222222222222
                               5730000000000000000000000000000000000000
... + 40
                               222222222222222222222222222222
                               000000000000000000000000000000
RSJOBINFO                                                      00000000
                               2222222222222222222222222222222233333333
                               0000000000000000000000000000000000000000
... + 40                      000000
                               3333332222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 80                      ####
                               0000
                               0000
RECEIVERS[]                    #############################2##########
                               0000000000000000000000000000930000000000
                               0000000000000000000000004000021000001000
... + 40                      ################ÿÿÿÿ´###########°8÷I####
                               0000000000000000FFFFB00000000000B3F40000
                               1000100010001000FFFF4E007000430008790000
... + 80                      ############################²!##
                               0000000000000000000000000000B200
                               00000000000000000000000000002100
RECEIVERS                        00000000#000000
                               2233333333033333322222222222222222222222
                               0000000000000000000000000000000000000000
... + 40
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 80                         00000000000000B   SR007
                               2223333333333333342225533322222222222222
                               0000000000000000020003200700000000000000
... + 120
                               22222222
                               0000000
SENT_TO_ALL
                               2
                               0
F_RESUB_SENT
                               2
                               0
GF_ACC                         2
                               3
                               2
F_OBJECT_NOT_SEND              X
                               5
                               8
ON                             X
                               5
                               8
SPACE
                               2
                               0
OFF
                               2
                               0
MTRP                           MRP
                               4552222222222222222222222222222222222222
                               D200000000000000000000000000000000000000
... + 40
                               222222222222222222222222222222
                               000000000000000000000000000000
MRKX                           MRKX
                               4545222222222222222222222222222222222222
                               D2B8000000000000000000000000000000000000
... + 40
                               222222222222222222222222222222
                               000000000000000000000000000000
SIZE-APPL_OBJECT               1
                               0000
                               1000
SEND_PROC                      A
                               4
                               1
NEW_OBJ_NO_FILE                A
                               4
                               1
NEW_OBJ_WI_FILE                B
                               4
                               2
SCREEN                         MESSTXT8
                               4455555322222222222222222222222222222222
                               D533484800000000000000000000000000000000
... + 40
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 80
                               2222222222222222222222222222222222222222
                               0000000000000000000000000000000000000000
... + 120                                              00001200000#####
                               22222222
                               0000000
ATTA                           ATTA
                               4554222222222222222222222222222222222222
                               1441000000000000000000000000000000000000
... + 40
                               222222222222222222222222222222
                               000000000000000000000000000000
Active calls / events
No.... Type........ Name..........................
       Programm
       Include                                  Line
     1 FUNCTION     SO_OBJECT_SEND
       SAPLSOA2
       LSOA2U01                                  1264
     2 FORM         USEREXIT_SAVE_DOCUMENT
       SAPMV45A
       MV45AFZZ                                  1171
     3 FORM         BELEG_SICHERN
       SAPMV45A
       MV45AF0B_BELEG_SICHERN                    1115
     4 FORM         FCODE_SICH
       SAPMV45A
       MV45AF0F_FCODE_SICH                         18
     5 FORM         FCODE_BEARBEITEN
       SAPLV00F
       LV00FF0F                                    91
     6 FUNCTION     SCREEN_SEQUENCE_CONTROL
       SAPLV00F
       LV00FU02                                    58
     7 FORM         FCODE_BEARBEITEN
       SAPMV45A
       MV45AF0F_FCODE_BEARBEITEN                  109
     8 MODULE (PAI) FCODE_BEARBEITEN
       SAPMV45A
       MV45AI0F_FCODE_BEARBEITEN                   10
Internal notes
The termination occurred in the function "ab_jfune" of the SAP
Basis System, specifically in line 1403 of the module
"//bas/46D/src/krn/runt/abfunc.c#18".
The internal operation just processed is "FUNE".
The internal session was started at 20070207104801.
Active calls in SAP kernel
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App       : disp+work.EXE (pid=3424)
When      : 2/7/2007 10:55:18.262
Threads   : 2
Computer Name       : SECERPA2
User Name           : sapservicePK1
Number of Processors: 3
Processor Type: x86 Family 6 Model 10 Stepping 1
Windows Version     : 5.0 Current Build: 2195
Stack Dump for Thread Id 510
eax=00000000 ebx=03158da0 ecx=00400000 edx=00000000 esi=77f94086 edi=00000840
eip=77f94091 esp=03158d84 ebp=03158da8 iopl=0         nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=0038 gs=0000             efl=00000297
function :
         77f87106 58               pop     eax
         77f87107 e9f3800000       jmp     77f8f1ff
         77f8710c 8bc8             mov     ecx,eax
         77f8710e 81e1ff000000     and     ecx,0xff
         77f87114 0f84b3c40000     je      77f935cd
         77f8711a 0fbe8128e0f877   movsx eax,byte ptr ds:88099d34=0f
         77f87121 e9a7b0ffff       jmp     77f821cd
         77f87126 b848000000       mov     eax,0x48
         77f8712b 8d542404         lea     edx,[esp+0x4]          ss:4b59ec67=????????
         77f8712f cd2e             int     2e
         77f87131 c22800           ret     0x28
         77f87134 ff742410         push    dword ptr    ss:4b59ec67=????????
         77f87138 6a00             push    0x0
         77f8713a 6a00             push    0x0
         77f8713c ff742418         push    dword ptr    ss:4b59ec67=????????
         77f87140 ff742418         push    dword ptr    ss:4b59ec67=????????
         77f87144 ff742418         push    dword ptr    ss:4b59ec67=????????
         77f87148 e8b8800000       call    77f8f205
         77f8714d c21000           ret     0x10
         77f87150 55               push    ebp
         77f87151 8bec             mov     ebp,esp
         77f87153 51               push    ecx
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053ffcb0 00c310ac 00000a30 00000000 00000007 03325ae0 ntdll!
List of ABAP programs affected
Type
Program
Gen. date time
LoadSize
Prg
SAPMV45A
20.10.2005 17:39:06
1901568
Prg
SAPMSSYD
14.08.2000 15:39:21
16384
Prg
SAPFSYSCALLS
21.12.1999 19:32:31
7168
Prg
SAPFV45C
01.02.2006 18:21:05
549888
Prg
SAPFV45K
12.12.2004 11:00:10
623616
Prg
SAPFV45E
12.12.2004 11:00:10
732160
Prg
SAPFV45P
12.12.2004 11:00:10
1343488
Prg
SAPFV45S
12.12.2004 11:00:10
765952
Prg
SAPLAIEV
26.06.2002 23:34:53
14336
Prg
CL_OS_TRANSACTION_END_NOTIFIER
20.06.2004 17:53:14
8192
Prg
SAPLSYST
26.06.2002 23:13:17
38912
Prg
SAPLSBDC
26.06.2002 23:38:38
66560
Prg
SAPLNDAC
14.10.1999 23:32:54
7168
Prg
SAPLBUOP
12.12.2004 10:53:50
69632
Prg
SAPLITSR
20.06.2004 18:07:30
87040
Typ
TPS01
20.02.1998 09:19:57
2048
Prg
SAPLASTAT_TRIG
01.04.2003 19:09:20
12288
Typ
T180
20.02.1998 09:17:43
2048
Prg
SAPLV00F
13.12.2004 10:28:00
68608
Typ
T185V
10.11.1999 17:45:26
4096
Prg
SAPLV86E
12.12.2004 10:57:15
329728
Prg
SAPLVFSP
11.12.2004 16:23:47
251904
Prg
SAPLDLOG
04.01.2000 19:06:44
7168
Prg
SAPLVTXC
26.06.2002 23:35:28
24576
Prg
SAPLV45T
12.12.2004 11:55:08
137216
Typ
STXDRNAME
26.02.1999 14:48:42
2048
Prg
SAPLSTXD
20.06.2004 17:53:32
407552
Prg
SAPCNVE
04.01.2000 19:06:37
7168
Prg
SAPLLANG
04.01.2000 19:06:49
9216
Prg
SAPLV01Z
12.12.2004 10:59:08
205824
Prg
SAPLCLFM
12.12.2004 10:58:14
677888
Prg
SAPLCUOB
11.12.2004 15:53:45
34816
Prg
SAPLCLSE
11.12.2004 16:43:02
177152
Prg
SAPLCTMS
12.12.2004 10:58:25
940032
Prg
SAPLCTCV
12.12.2004 10:58:25
192512
Prg
SAPLCTCF
01.04.2003 20:49:26
24576
Prg
SAPLV01P
12.12.2004 10:57:28
163840
Prg
SAPFV45L
12.12.2004 11:00:10
450560
Prg
SAPLV45A
12.12.2004 11:00:10
871424
Typ
TPAER
15.04.1998 00:15:36
2048
Typ
VBMUE
12.04.1999 16:17:03
1024
Prg
SAPLSUSE
20.06.2004 17:33:55
44032
Typ
TCDCOUPLES
10.04.2002 10:24:49
2048
Prg
SAPLJ1AZ
11.12.2004 16:44:41
29696
Typ
TWPA
03.05.1999 19:52:52
5120
Prg
SAPLVEHS
12.12.2004 11:00:10
105472
Prg
SAPLPSCONV
26.06.2002 23:57:31
11264
Prg
SAPLSUNI
20.06.2004 17:33:13
138240
Typ
TFDIR
29.07.1998 19:49:08
2048
Prg
SAPLCJPN
12.12.2004 10:58:11
310272
Prg
SAPLSCNT
26.06.2002 23:35:28
28672
Prg
SAPLSVSM
26.06.2002 23:35:28
25600
Prg
SAPLSGUI
26.06.2002 23:35:28
33792
Prg
SAPLSTTM
26.06.2002 23:38:39
84992
Prg
CL_DATAPROVIDER===============
26.06.2002 23:35:25
51200
Typ
OBJ_RECORD
14.02.1998 08:30:43
2048
Prg
SAPLSTUP
20.06.2004 17:52:24
95232
Prg
SAPLCNDP
26.06.2002 23:35:27
181248
Prg
SAPFGUICNTL
01.04.2003 18:42:31
20480
Prg
SAPLOLEA
26.06.2002 23:33:43
81920
Prg
SAPLSFES
20.06.2004 17:33:13
141312
Prg
SAPLGRFC
26.06.2002 23:33:43
16384
Prg
SAPSHDTV
01.04.2003 19:09:39
36864
Typ
SHDSTU
14.12.1998 23:15:34
1024
Typ
SHDSTCIU
14.12.1998 23:15:34
1024
Prg
CL_GUI_PROPS_CONSUMER=========
01.04.2003 18:26:40
26624
Prg
CL_DYNAMIC_GUI_EXTENSIONS=====
11.02.2000 14:36:06
55296
Prg
CL_GUI_DATAMANAGER============
01.04.2003 18:43:20
82944
Typ
VBAKKOM
10.04.2002 09:50:02
22528
Prg
/1BCDWBEN/SAPLVEN0000
01.04.2003 20:55:35
145408
Prg
SAPLSENA
04.01.2000 19:06:53
28672
Prg
SAPLV45K
12.12.2004 11:00:10
110592
Prg
SAPLV45I
12.12.2004 11:00:17
476160
Typ
VBAK
23.11.2002 15:53:28
15360
Prg
SAPLV21F
12.12.2004 11:00:10
142336
Typ
TVAK
26.03.1999 15:09:05
13312
Typ
TVAKT
14.02.1998 14:38:43
2048
Typ
TVKO
06.05.1998 02:22:47
4096
Prg
SAPLSZA0
05.01.2007 15:17:56
2089984
Typ
TSAD3T
14.02.1998 17:01:10
2048
Typ
ADCNTRYQU
04.01.2000 18:08:16
1024
Typ
ADRSTATUS
29.01.1997 19:04:23
1024
Typ
ADRC
10.03.1999 18:47:25
11264
Typ
ADRCT
28.08.1997 08:35:27
2048
Typ
ADRG
03.07.1996 22:44:47
1024
Prg
SAPLSZAD
05.01.2007 15:17:50
23552
Prg
SAPLSADR
20.06.2004 17:53:59
203776
Typ
T005
14.10.1999 22:02:32
7168
Typ
T001
12.03.1999 15:15:31
9216
Typ
TVTW
27.05.1992 18:19:33
1024
Typ
TSPA
10.06.1992 12:18:00
1024
Typ
TVBUR
25.07.1996 16:33:30
2048
Typ
TVKGR
14.07.1993 02:32:49
1024
Typ
TVTA
03.09.1997 03:28:25
3072
Typ
VBKD
08.04.2002 15:08:30
10240
Prg
SAPLV05I
12.12.2004 10:57:14
486400
Prg
SAPLSZA13
26.06.2002 23:39:42
12288
Prg
SAPLV05E
12.12.2004 10:57:15
405504
Typ
TPAR
27.08.1994 21:59:27
2048
Prg
SAPLV08D
11.12.2004 15:57:13
20480
Typ
KNA1
03.04.2003 18:05:27
16384
Prg
SAPLV09D
12.12.2004 10:57:17
168960
Typ
ADR2
25.01.1999 13:08:51
3072
Typ
ADRT
14.02.1998 05:38:23
2048
Prg
SAPLSZA8
20.06.2004 17:34:25
73728
Typ
VBADR
11.12.2004 15:51:24
5120
Prg
SAPLVS01
03.04.2003 18:05:31
179200
Typ
TPAKD
26.10.1994 17:32:29
1024
Prg
SAPLXV09
04.01.2000 19:06:57
13312
Prg
SAPLWY14
11.12.2004 15:57:26
23552
Typ
KNVK
01.04.1998 02:08:10
9216
Typ
ADRP
14.04.1998 11:18:32
6144
Typ
ADRGP
03.07.1996 22:44:47
1024
Typ
ADCP
23.04.1998 14:45:51
2048
Prg
SAPLHRMR
16.08.2000 17:00:24
26624
Prg
SAPLHRAC
08.04.2002 15:01:41
55296
Prg
SAPLSXCH
20.06.2004 17:53:46
80896
Typ
V_EXT_ACT
14.10.1999 22:16:55
2048
Typ
ACT_IMP
25.01.1999 12:55:20
1024
Prg
CL_HRPAD00AUTH_CHECK_STD======
16.08.2000 17:03:23
111616
Typ
P0001
16.08.2000 17:00:14
6144
Typ
T77S0
08.03.1992 17:36:54
1024
Prg
SAPLHRIPA02CENTRAL_PERSON
09.12.1999 20:12:54
25600
Typ
PA0105
03.09.1997 03:22:10
4096
Prg
SAPLHRPAPAXX_T777D_READ
12.04.1999 17:50:35
15360
Typ
T777D
25.03.1999 15:43:54
5120
Prg
SAPLSEQ0
20.06.2004 17:33:45
87040
Typ
PS0001
13.09.1996 17:21:13
4096
Prg
SAPLSDIF
20.06.2004 17:11:50
256000
Prg
SAPLSDNT
01.04.2003 18:57:26
188416
Typ
T522T
28.08.1997 09:05:45
2048
Typ
T500P
03.09.1997 03:24:54
3072
Prg
SAPLHRPAPAXX_T582S_READ
12.04.1999 17:50:35
10240
Typ
T582S
14.02.1998 11:43:07
2048
Prg
SAPLVADR
11.12.2004 16:45:16
67584
Prg
SAPLV09A
12.12.2004 10:59:08
493568
Prg
SAPLV46B
12.12.2004 11:00:10
67584
Prg
SAPLSWUG
20.06.2004 17:52:24
265216
Typ
SWOTOBJID
04.05.1995 15:20:52
2048
Typ
SWHACTOR
04.04.1995 16:18:07
1024
Prg
CL_GOS_MANAGER================
26.06.2002 23:35:25
24576
Prg
CL_GOS_VIEW_MANAGER===========
26.06.2002 23:35:25
29696
Typ
SGOS_MVOBJ
01.12.1999 08:16:05
2048
Prg
SAPLSUU1
20.06.2004 17:53:44
181248
Typ
USR02
26.06.2002 23:13:21
5120
Typ
USREFUS
01.04.2003 18:41:15
1024
Typ
BORIDENT
28.08.1997 08:38:50
1024
Prg
CL_GOS_TOOLBOX_MODEL==========
20.06.2004 17:53:55
39936
Typ
SGOS_MODL
08.02.2000 16:42:30
3072
Prg
SAPLBDLS
14.08.2000 15:20:53
13312
Typ
T000
11.09.1997 10:17:18
3072
Prg
CL_GOS_PUBLICATION============
26.06.2002 23:35:25
24576
Prg
CL_GUI_OBJECT=================
26.06.2002 23:35:25
1024
Prg
CL_GUI_CFW====================
01.04.2003 19:10:31
196608
Typ
TOLE
29.07.1998 19:56:01
2048
Prg
SAPLSGOSHIST
26.06.2002 23:40:40
56320
Prg
SAPFSGOS
26.06.2002 23:40:32
13312
Typ
SGOSHIST
14.10.1999 22:09:01
2048
Prg
SAPLURFC
04.01.2000 19:08:13
14336
Prg
CL_GOS_STARTER================
26.06.2002 23:35:25
21504
Prg
CL_GUI_CONTROL================
26.06.2002 23:40:31
117760
Prg
CL_GUI_TOOLBAR================
26.06.2002 23:35:25
72704
Prg
CL_GUI_GOS_CONTAINER==========
26.06.2002 23:35:25
38912
Typ
CFW_LINK
01.12.1999 12:16:48
2048
Prg
CL_GUI_CONTAINER==============
26.06.2002 23:35:25
58368
Prg
SAPLCNTH
26.06.2002 23:40:20
26624
Prg
SAPLSCONTROLINFO
04.01.2000 19:06:52
13312
Prg
SAPLSCONTROLSTATUSCHECK
04.01.2000 19:06:52
10240
Typ
USR05
09.07.1997 23:46:52
1024
Typ
CNTLWARN
25.01.1999 13:09:44
2048
Prg
SAPLICON
14.08.2000 15:39:37
25600
Prg
%_CICON
14.08.2000 15:39:36
55296
Typ
KUAGV
01.03.1999 13:28:45
9216
Typ
KNVV
30.11.1999 10:18:28
9216
Typ
KUPAV
19.02.2001 12:29:12
7168
Prg
SAPLSUSM
01.04.2003 18:26:37
35840
Typ
USR21
10.03.1999 18:32:06
2048
Prg
SAPLSUGS
04.01.2000 19:06:54
15360
Prg
SAPLSUG2
04.01.2000 19:06:54
37888
Typ
CVERS
26.04.1999 17:21:32
2048
Typ
SVERS
30.07.1992 18:39:23
1024
Typ
UVERS
16.07.1997 14:46:33
3072
Typ
V_ADDR_USR
27.08.1999 18:32:38
15360
Typ
TSADCORR
20.06.2004 17:32:36
1024
Typ
T005T
14.02.1998 10:26:48
2048
Typ
TSAD3
16.07.1997 14:46:19
2048
Prg
CL_EXITHANDLER================
20.06.2004 17:33:43
13312
Prg
CL_ABAP_TYPEDESCR=============
04.01.2000 19:06:00
17408
Prg
CL_ABAP_ELEMDESCR=============
04.01.2000 19:06:00
13312
Prg
CL_ABAP_DATADESCR=============
04.01.2000 19:06:00
11264
Prg
CL_ABAP_REFDESCR==============
04.01.2000 19:06:00
14336
Prg
CL_ABAP_STRUCTDESCR===========
04.01.2000 19:06:00
16384
Prg
CL_ABAP_COMPLEXDESCR==========
04.01.2000 19:06:00
11264
Prg
CL_ABAP_TABLEDESCR============
04.01.2000 19:06:00
16384
Prg
CL_ABAP_CLASSDESCR============
04.01.2000 19:06:00
23552
Prg
CL_ABAP_OBJECTDESCR===========
04.01.2000 19:06:00
28672
Prg
CL_ABAP_INTFDESCR=============
04.01.2000 19:06:00
21504
Prg
IF_EX_ADDR_PRINTFORM_SHORT====
01.04.2003 18:43:42
7168
Typ
SXS_INTER
30.11.1998 15:55:16
1024
Prg
SAPLSEXV
20.06.2004 17:11:44
157696
Prg
CL_EX_ADDR_PRINTFORM_SHORT====
01.04.2003 18:43:42
15360
Prg
CL_EXIT_MASTER================
01.02.2000 09:29:10
10240
Typ
V_EXT_IMP
14.10.1999 22:16:55
2048
Prg
SAPLSCP5
20.06.2004 17:11:41
23552
Typ
T683V
24.02.1999 03:31:49
2048
Typ
KUWEV
01.12.1999 15:13:15
11264
Typ
KURGV
23.04.1998 14:51:01
7168
Typ
KNVA
10.07.1993 03:46:26
5120
Prg
SAPLV52E
12.12.2004 11:55:16
506880
Typ
KNEX
15.04.1998 00:23:05
4096

JMS Destination object not found

Hi everyone,
I have a weird problem with SunONE Message Queue 3.
I have a queue and a connection factory defined (using the SunONE Application Server 7 Admin Console) as well as a physical resource.
I can verify their existance using asadmin....
asadmin>list-jmsdest -u admin server1
queue_1 queue {}
asadmin>list-jms-resources -u admin server1
jms/newqueue_1
jms/newQCF_1
When I attempt to deploy a message driven EJB I get the following error
SEVERE ( 1484): javax.naming.InvalidNameException: JMS Destination object not found:`jms/newqueue_1`
This question has already been asked on the App Server board here http://swforum.sun.com/jive/thread.jspa?threadID=15517&tstart=0 (that post is nine months old btw).
I am posting this here in the hope that someone more familiar with MQ3 may have an idea of how to help us.
Thanks in advance.

I have now solved this problem. External JNDI resources are required in the AppServer.
They can be created with the following commands:
asadmin>create-jndi-resource jndilookupname jms/newQCF_1 resourcetype javax.jms.QueueConnectionFactory factoryclass com.sun.jndi.fscontext.RefFSContextFactory enabled=true --property java.naming.provider.url=file\:///c\:/java/mqjndi:java.naming.security.authentication=none newQCF_1
asadmin>create-jndi-resource jndilookupname jms/queue_1 resourcetype javax.jms.Queue factoryclass com.sun.jndi.fscontext.RefFSContextFactory enabled=true --property java.naming.provider.url=file\:///c\:/java/mqjndi newqueue_1
Both these commands assume that the file system context is being used however the LDAP commands are similar (just more properties).
This step, which seems vital, is missing from the AppServer documentation (in fact it specifically states that this step is not necessary). The irony is that I found the answer in the IBM MQ documentation!

Insert ActiveX Object - not in list

Similar Messages

Maybe you are looking for