Actor Framework: Should I merge Errors and error Codes?

Hi guys--
Actor Framework, LV2012: In general, should I be merging normal Error lines with the "error code" lines that occur in some of the override VI's? Or are these meant to be two distinct channels of information?
Attached is a contrived example (I wouldn't normally pass this particular error) that illustrates the kind of situation I find myself puzzling over.
I encounter such situations sometimes when overriding "Stop Core". Assuming one did not want to suppress the error at "Destroy Event", is this the proper way to handle this situation?
Thanks a bunch, and have a great day.
--Brad

I would post this question to Actor Framework community rather than here, as active Actor Framework users are likely to be subscribed for discussions happening there.
https://decibel.ni.com/content/groups/actor-framework-2011
I am also interested in what people say about it.
TailOfGon
Certified LabVIEW Architect 2013

Similar Messages

The system failed to merge, error code : General Access denied

The system failed to merge, error code : General Access denied. Could anyone help me on this

Hi,
It could be several things, I think it could be a good start with the following page:
https://blogs.technet.com/b/chrad/archive/2009/10/02/differencing-disks-merging-80070005-error-just-one-persons-lesson-learned.aspx
If that doesn't help you could check out the following technet page to see if it is a permission problem. (it is not exactly the same problem but one of our customers once had the same problem and we solved it with the follwing KB:http://support.microsoft.com/kb/2249906/en-us
Hope this helps you out.

Where can I get a list of Labview fieldpoint error codes?

I'm programming my application and want to act on some error codes such as failure to communicate but ignore others like some values out of range.

Assuming that you did a default installation, you can click Start-->Programs-->National Instruments-->FieldPoint 3.0-->FieldPoint Help. There is a category called Errors and Warning Codes. Under that category is two subcategories; FieldPoint Specific Error Codes and General Error codes. These two sub-categories should list most error codes that you will see.
Regards,
Aaron

HP Pavilion DV7 1120eo doesn't boot (Error Code 1 / CPU)

Hi,
I have a DV7 that doesn't want to boot.
When I try to boot it up, the screen just stays black and the caps lock indicator blinks one time between each "pause", which should be an error code for broken CPU(?!).
I asked the HP Support team on Twitter how reliable the error codes are, and according to them they should be reliable.
So I repleaced the CPU with another one, but still the error code shows when I try to boot.
I'm just wondering if you may know what could be wrong? Could the CPU socket itself be broken?
I found a long hair laying in between the CPU and CPU socket, but I reckon that it can't be the problem, or else something would've gone wrong like 3 years ago - since it must have been there since the computer was manufactured.
Anyway, I hope I can get some clarity or advice on things to try out.
Best Regards
Alexander

Baking in the oven can work but it is a crude, temporary fix. Unless you have access to high tech diagnostic and repair tools, a bad motherboard is a bad motherboard and is a "replace only" item. There are services on the internet where shops with the tools will fix your motherboard and the cost is very reasonable if you can remove the motherboard yourself and just ship that, instead of the whole computer. We are talking in the range of $60US. Even if you have to send the board to the US, the cost is very competitive with a replacement board. Here is a replacement board on eBay that ships worldwide from China:
http://www.ebay.com/itm/HP-Pavilion-DV6-DV6-1000-DV7-DV7-1000-Series-laptop-AMD-Motherboard-509404-0...
This repair service would be $108 with shipping:
http://www.ebay.com/itm/Motherboard-Repair-Services-HP-Pavilion-DV7-1000-486542-001-506124-001-/3008...

Error Code -200220

I'm developing an independant application for a USB-6009. I get -200220 from the DAQmxResetDevice function. Does anyone know where I can find a list of these errors?

tommysaurus,
Here's the error description:
Error -200220 occurred at an unidentified location
Possible reason(s):
Device identifier is invalid.
In order to get this info yourself, I believe you can use the DAQmxGetErrorString function. It's explained quite nicely in the NI-DAQmx C Reference help. But basically it should take an error code, and pass back a string description.
Hope this helps,
Dan

Problem in merging java script and java code

hi,
i want to merge java and javascript code but it is giving some surprising results.
this is my code:
<script language = "javascript">
<%
String query_result= "1";
String buttontype="";
buttontype=(String)session.getAttribute("buttontype");
query_result = (String) session.getAttribute("query_result");
out.println(query_result);
if(buttontype!=null&&(buttontype.equals("submit")))
out.println(buttontype);
%>
alert(<%=ka%>)
</script>
<%
%>
now if i'll move "<script language = "javascript">" to:
<%
String query_result= "1";
String buttontype="";
buttontype=(String)session.getAttribute("buttontype");
query_result = (String) session.getAttribute("query_result");
out.println(query_result);*/
if(buttontype!=null&&(buttontype.equals("submit")))
out.println(buttontype);
%>
<script language = "javascript">
alert(<%=query_result%>)
</script>
<%
%>
then it prints correctly and gives alert "1" but if i'll change query_result="manish" then it is not giving alert also
i don't know wht is happening
plz help me out
manish

hi pgeuen,
Thanx for ur reply
now its working i have changed my jsp exp. tag to
alert("\"<%=ka%>\"")
and it is displaying correctly.
and if i'll give the scripting tags in "if block"then it will work but till now i didn't get why i was not getting any output when the scripting tags covers the whole jsp code. i think we can mix java script and jsp in any way.
well thanx a lot.
manish

I'm trying to transfer my pictures from my iPhoto library to my external hard drive. I dragged the iPhoto Library folder into the drive and after waiting a while it says Error Code -36. I need to free up space asap, what should i do?

I'm trying to transfer my pictures from my iPhoto library to my external hard drive. I dragged the iPhoto Library folder into the drive and after waiting a while it says "Error Code -36 The finder cannot complete the operation because some data in 'iPhoto Library' could not be read or written". I need to free up space asap, what should i do??

Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

"Bridge is running low on memory and should be restarted" error

I am running Bridge CS4 on a DELL T-1650 with plenty of hard drive space. I am having trouble with indexing / caching files. My computer is connected to a large office server with a large amount of files that I need to be able to search. I recieve a "Bridge is running low on memory and should be restarted" error each time I attempt to index the files on the server drive. I have tried Purge and Cache, set the cache memory slider to max. This is a very large amount of files (TB ) to index /cache. I leave the computer running overnight to allow ample time, I nothing on my TB hard drive , and have 16GB of available RAM. Any ideas?

…My computer is connected to a large office server…
Aha! Working over a network is not supported by Adobe.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

I just restored my Mac HD from a time machine back-up and PS 4 Will not open. I get an error code 150:30. Any Idea what I should do ?

I just restored my Mac HD from a time machine back-up and PS 4 Will not open. I get an error code 150:30. Any Idea what I should do ?

Photoshop's licensing information might have lost when you restored it to new HD. Re-install Photoshop CS4 and enter the same serial key for PS CS4 which you used before.
In case you need the download link for PS CS4, you can get it from here. Download CS4 products
Let me know in case you still get any issues.
~ Arpit

Need a query,which will do a comparison and if it doesnt satisfy the condition it should raise an error by using raiserror statement

I have a Table called Test_ X in which there are two fields:
1) date_value
2)Application_Name
requirement: we have to calculate the number of days ramaining through date_value field and compare it to with n days.
if it is less than n days it should raise an error through raiserror statement.
I get the below logic to get the no of days before expiry:
select GETDATE() 'Today Date',
date_value 'expiry date',
abs(DATEDIFF(dd,date_value,getdate()))'No of days before expiry'
from dbo.Test_X
where Application_Name='xyz'
With above satatement am able to get the Number of days before expiry .
my question is how to comare it with a variable say n days and if is less than n days it should raise an by using raiserror statement .
Please help or advice.

You can use variables in the RAISERROR, but not expressions, e.g.
DECLARE @Days INT;
SET @Days = ABS(datediff(day, '19000101', CURRENT_TIMESTAMP));
RAISERROR (
N'This is message %s %d.'
,-- Message text.
10
,-- Severity,
1
,-- State,
N'number'
,-- First argument.
@Days
);-- Second argument
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

Error: Year should be betwnn 1 and 9999

Hi,
I am having the the error 'Year should be betwnn 1 and 9999' when i am using the formula editor of the Crystal Reports. The code that i am using is as follows:
Global numbervar Period_base;
dateVar Period_From := DateSerial(ToNumber(left({s006.SPBUP},4)),ToNumber(Right({s006.SPBUP},2))+Period_base,1);
stringvar Period_year :=totext(year(Period_From),0,"","");
stringvar Period_month :=totext(month(Period_From),0,"","");
if length(Period_month)=1 then
Period_year"0"Period_month
else if length(Period_month)=2 then
Period_year+Period_month;
I don't have any idea on how to solve the above problem.Please help.
Thanks in advance,
Raja.N

Hi Raghava,
I am also facing the same issue for one of the standard report that is given by SAP.
Did you get the solution for for this issue??
Please tell me the steps if you tried it in a different way also and help me out to go ahead with my development.
Thanks in advance.
Regards,
Ramesh

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

I have burned CDs before from 2gb to 7gb using different types of discs. Now I get this error message Apple error The disc can't be burned because communication between the computer and the disc drive failed (error code 0x80020022). What should I do

Reset the SMC, as per > Resetting the System Management Controller (SMC)
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
Then zap the PRAM/NVRAM as per > About NVRAM and PRAM
1. Shut down the computer.
2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
3. Turn on the computer.
4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
6. Release the keys.
Then retry the Disc Drive.

TS3694 my iphone 4 has a error code (3002 code). what exactly of it mean and what should i do to solve this problem? thanks you

hi everyone. my name is joseph, i got the problem on my iphone 4 16GB BLACK. first time i did damage the battery connector and i have some store fix it for me, thaey actually sodered it and right now the iphone is not chargeable. the only thing i can do it to plug directly in the with the cable charger in other for the phone to bea able to use, but when i disconnect the cable, the phone is power off completely. right now al i can do is to connect to the itunes and try to restore it and its shown that my iphone has an error code which is (3002). i dont know whats mean and how to fix it. can anyone give my some suggestion what i mean to do? thanks you for your read

Also I've tried to reset it and it still keeps doing the same thing

Buning Problems Error Code 4450 and 4280...what should I do????

I tried to lower the speed as I read in other postings and it did not work. What now.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
Hewlett-Packard HP Pavilion dv2000 (RG408UA#ABA)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce Go 6150
Connected Device Information:
DiskDrive, ST9120821AS, Bus Type ATA, Bus Address [0,0]
DiskDrive, Ricoh Memory Stick Disk Device, Bus Type UNKNOWN
CDROM, TSSTcorp CD/DVDW TS-L632L, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: TSSTcorp CD/DVDW TS-L632L, Rev HP16
Drive is empty.
Writing CD text is turned on in the preferences. If you're having problems burning CDs, try turning this preference off.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TSSTcorp CD/DVDW TS-L632L on CDR media at speed 4X.

I just tried to reduce the speed the drive it self and I still got error code 4280...I don't know wuts going on because I can't burn anything in windows media player either.
that's not an especially good sign. i get worried about 4280s because they can sometimes indicate a hardware problem in the drive. (for example, belladonna started throwing them at me when her Lite-On drive started to die.)
we'd better check to see if you're properly up to date before checking on that possibility though.
i had a look at your downloads page at HP. (thank you kindly for including your model number in your system information.)
Software & Driver downloads: HP Pavilion dv2125nr Notebook PC (XP)
there's nothing there by way of new firmware for the drive that is throwing the 4280. but there are a few other downloads of interest.
check to see if that HP Notebook System BIOS update is applicable to your particular configuration of dv2125nr, and if so, make sure you're up to date.
check to see if that new AMD Processor Update for Microsoft Windows XP is applicable to your configuration, and if so make sure you're up to date with it.
check to see if your NVIDIA GeForce Go 6150 Graphics Driver is up to date.
once you're satisfied that you're up to date, do you still get the 4280?

When I try to downlead apps I get the Message "error code 4001, try again later." What does this mean and what should I be doing about it ?

I recently restored to factory settings.I updated iTunes Store account details and change of password on my PC. After that I tried to log on to the Store via my mobile and was confronted with my previous ISP,s log on page requesting password which when entered correctly it didn't recognise. The restoration action solved that particular problem but has now left me with the "error code 4001 problem. Be grateful for solution..

means that apple mobile device service needs to be started try this article to get it turned back on
Restart apple mobile device service

Actor Framework: Should I merge Errors and error Codes?

Similar Messages

Maybe you are looking for