Actual Costing - CKME update in group and local currency - split

Hi Experts,
We are using Actual Costing and running CKMLCP and CKME to update our standard price, in local currency and in group currency.
The result it is one PR accounting document, with group currency and local currency booked in it.
Now, we have this requeriment where they want to have 1 PR document with local currency booked and $0 group currency and another PR document with local currency as $0 and Group Currency booked.
It is like doing MR21 and not doing automatic translation into foreign currency, that is what we want.
So, the question is, Is there a way of archiving this in a simple way?
Thanks for your comments!
Enrique

Hi Enrique,
The final step in CKMLCP enters future prices for all materials based on the actual prices of the period.
You could Use CKMPRPN the 'maintenance of future prices' with it's rule based approach to change the data before activating with CKME.
You could
1. delete the group currency future prices (CKMPRPN)
2. release the new standard prices in company code currency (CKME)
3. create future prices in group currency by adopting the (previous month's) V-price as future price (CKMPRPN)
4. release the new standard prices in group code currency (CKME)
I am not sure if you could also distinguish the validity dates between both currencies with CKMPRPN. If yes, that might be better than deleting and rebuilding the price.You could change the date for one currency into the future, use CKME, change the date back and use CKME again.
A disadvantage of the procedure would be that you will not release the cost component split from CKMLCP. In step 4 only the new price will be released and the split will be created from the former split. In step 2 the original split from CKMLCP will be activated.
best regards,
Udo

Similar Messages

Getting diffrent Actual cost from 0PM_OM_OPA_2 to 0pm_c01 and 0pm_c07

Hi All,
I am using BI report for plan and actual cost deviation of Work order(maintenance order) of PM(tcode iw33>cost tab>plan actual cost to check),
question there is 2 query for this plan actual cost deviation, one on 0pm_c01(Maintenance Orders - Costs and Allocations) and second on 0PM_C07 Maintenance Orders: Scheduling, datasource is common 0PM_OM_OPA_2 for actual cost population in this cubes, BUT update rule are diffrent for both target,
in 0pm_c07 its getting update by 0pm_ds04(dso) where we are getting only Actual cost with Debit(S) Entery(as debit(S) entery hardcoded at start routine in update rule from this datsource to 0pm_ds04), for report on 0pm_c07actual cost is matching with standard ecc report MCI8 - PMIS: Cost Analysis.
in 0pm_c03 we are getting all Actual cost entry both Debit(S) and Credit(H), getting actual cost total as debit minus credit entry at cube 0pm_c03 and hence getting same on report on that, this report is same as like report on 0pm_c07.
both report are calculating Actual vs Plan cost relation ship, but one report(on 0pm_c07) have only debit(S) entry while other report(on 0pm_c03) have both Debit and Credit entery, So getting diffrent Actual cost at both report hence diffrent Actual VS plan Cost relationship from both report,
Both are standard report given by SAP, Now which report we have to take it as correct one? which report is right?
Regards,
Dushyant.

Hi,
Sorry, In my pain post whereever i written 0pm_c03 is wong its 0pm_c01,
as u said ur query on 0pm_c01 works fine? are u getting Debit(S) and credit(H) both entery for actual cost in this cube?
as in 0pm_c07 we are gettin only debit(S) entery and this report matching with standard ecc reprot( as i mentioned in main post ) BUT for 0pm_c01 its have both S and H entery. if ur actual/plan cost report on 0pm_c01 have S and H entery for actual cost than with ECC report you are reconciling?
Dushyant.

Different Aquisition Value (APC) for group and local depreciation area?

Hello,
Is it possible to have different APC/acquisition value in your group and local depreciation area? We want to book the net book value as APC for local depreciation area while gross APC and accumulated depreciation are recorded in group depreciation area.
Group Depreciation Area
APC- 100
Accum Dep- 20
Local Depreciation Area
APC-80
I'd highly appreciate if you can give inputs.

Hi,
You did exactly whats required to acheive your requirement.
There is no more further implications by removing the tick for a while and reverting after go live.
While doing AS91, if you enter the APC value for 01 area, then that value will be automatically populated to the other dependent areas of 01 area. ( In case, if your other areas are in diff currency also, system will converts the 01 area value in to other area's curr by taking the exch rate).
Here you can still change the APC values for the all other areas. (The other areas should have been unticked for Identical APC value check box in OABC).
So while creating AS91, in tkaover values tab, enter APC value 80 in your 01 area and manually change the value in your group area. (REmove 80 and enter 100).
For accum dep, in takeover values tab, enter accum dep 20 in group area only. (like OABC, in OABD also the other areas should be unticked for the identical value check box).
This will resolve your issue.
Thanks,
Srinu

Diff b/w group vs local currency (both curr same) in Inventry GL A/c

There is a difference b/w group vs local currency on trial balance (where both currencies are same) in Inventory GL account, which are supposed to match. Any Probable reasons...

You can check the line items in the FBL3N and then can compare the local currency and group currency amount for various lines. (Both these fields are available in the output layout.)
Regards,
Gaurav

Foreign and Local currency balance difference in GL

Dear All,
I have a GL for Bank in which entries are posted manually through F-02. GL is maintained on company code currency (Say INR). The transactions posted are in foreign currency (ex USD).
when we check the balance of the account in FBL3N it is showing FC balance as zero and Local currency balance as 100 INR.
The above situation is due to the following
Received Amount 100 USD @ 40 = 4000 INR (manually posted JV)
Credited amount 100 USD @ 39 = 3900 INR (Manually posted through JV).
As both the activity is done through JV the system dint prompt for exchange rate difference account. So no my question is:
1. In this scenario, is there any why the system can automatically post entry to exchange rate difference Or posting Manual JV is the only way out.
2. What is the use of Tcode F.05. What it actually does.
Thanks for your valuable time.
Please let me know if you need any additional details
Regards
Naveen

Hi
Since you do not have any parallel currency, The balance of 100 INR in Local Currency is correct. There is no need to write it off.
My understanding is that the transactions are as below.
Transaction    Doc Curr   Doc Curr Amt      Loc Curr     Loc Curr Amt
1                     USD            100.00                 INR                4000.00
2                     USD           -100.00                 INR              -3900.00
Balance                                0.00                                          100.00
You have a Bank Account which is maintained in INR.
In first transaction, you have a receipt of 100$ and bank has applied a rate of 1USD = 40 INR. So the balance is 4000 INR.
Then you have made a payment of 100$ and bank has applied a rate of 1USD = 39 INR. So you still have 100 INR.
That is not a gain or loos. It is valid balance.
Thanks
Prasad
Edited by: Prasad Neelisetty on Dec 23, 2009 8:35 PM
Edited by: Prasad Neelisetty on Dec 23, 2009 8:36 PM

How to show both SC and Local Currency in PLD at Amount place?

Hi sir,
I want to show both System Currency and Local Currency in PLD at the Amount Place.
And amount in Words also.
When i preview my PLD Report than it show the both SC and LC in Words.
So,plz help me sir.!

Hello jyotasna ,
Docuement total always in one currency depend on selected Customer or Vendor and if you want to in two currency then you should make UDF(User Define Field) for other currency.
also make FMS for calculation in this UDF .
If you want to amount in word in PLD then you should use ,select option Amount in words
for this configuration you should need workaroud.
Thanks
Manvendra Singh Niranjan

SEM -BCS Trasaction currency and Local Currency

SAPGURUS
I have one issue , When the users are doing Half yearly BCS they see that for one company code for one item period values Local currency is diifeernt from
Transaction currency .
My question is why this Transaction currency is different from local currecny.
How to rectify this .
Are they missing any exchnage rate conversion .
Thanks in Advance .
are they missing any exchnage rate conversion .

Hi Dan Sullivan
Thanks for the quick reply .
One more question .
I see in the BCS T Curency as Euro and Local currency as Euro .
but the period values localy currency is different from Transaction currency .
I think the values should be the same if both T Currecny and Local Currency is same .
I also observed that this particular difference is happening only for 2 particular set of accounts . Those accounts are related to Intercompany related G L Accounts values .
I also observed that in the Break down category for these G L Accounts The break down structure category has defined as defaulted .
I would like to know what would be the cause for the above .
Thanks in Advance .
Ravindrareddy.P.

In Journal can i specify the Foreign currency and local currency amount?

In Journal Entry can i specify the Foreign currency amount and local currency amount?
I tried the following code it is working fine using DIAPI.
Here the Local currency and the System currency is SGD. And the Journal is for USD.
oJnl.Lines.FCDebit = 120.10
oJnl.Lines.FCCredit = 0
oJnl.Lines.FCCurrency = "USD"
oJnl.Lines.Debit = 120.10
oJnl.Lines.Credit = 0
oJnl.Lines.Add()
oJnl.Lines.FCDebit = 0
oJnl.Lines.FCCredit = 120.10
oJnl.Lines.FCCurrency = "USD"
oJnl.Lines.Debit = 0
oJnl.Lines.Credit = 120.10
oJnl.Add()
But, the above way of doing is not working if i pass this Journal through B1.
B1 is not allowing to change the local currency amount, Local currency amount is automatically calculated based on the FC amount and the Exchange rate.
So Can i use the DIAPI to do this? is this right to do?

Solved.
In Journal Entry window, please kindly go to Form Settings/Document/
Table tab page/ Convert Amounts According to Rate upon Exit:
Clear the checkboxes 'From LC Field' & 'From FC Field', then the Local
currency amount will not be automatically calculated based on the FC
amount and the Exchange rate.

Diplay Functional,Reporting and Local currency

Hi,
I've a requirement to display Transactions in functional,Reporting as well as in Local currency.Do I need to setup Oracle 11i Env in MRC for that?If so how to get the transactions displayed in Local cuirrency ?Do I need to Covert them or I've to create new set of books for the same like we create one for reporting currency?
This requirement is for 11.5.10.2 as well as R12
Thanks,
Mahender
Edited by: user518071 on Jul 30, 2010 6:20 AM

Hi
You need to do the following
In 11i
1. You need to set up Reporting Set of Books to get the transactions and reports in Reporting currency for Local Currency, Functional Currency.
2. If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
In R12
1. You can set Reporting currency if you need the transactions and reports in Reporting currency provided Chart of Accounts, Calendar and Convention is same.
If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
2. If the requirement is not only currency but you need for a different Calendar or COA or Accounting convention, then you need to set a Secondary Ledger
Hope this helps
Regards
Sivakumar

Actual cost not updating in Pm order

Hi Experts,
We have a requirement from management for Having budget control based on department wise.
For that we are trying out substitution rule by which Pm order is replaced with Internal order .we are having a budget profile and budget for internal order.Now we are able to control budget and system stopping if budget exceeded in migo transaction .We are replacing pm order with IO order with substitution with pm order number range. Issue is after having this setting actual cost is not updating in Pm order and pm report.
Same is getting updated in mseg against pm order.
With regards
Anand.M

Hi Anand
Please add the budget profile at Plant maintenance order level no need to add any substitution rule
budget should also be control at order level
Thanks
trinath

Activity type - actual cost automatic updation

Hello Gurus
I have done KL01 KP06 and KP26 transactions. That is I ahve defined the activity and assignes a cost conter to it.
i need some report , when i will check the tcode S_ALR_87013611 - Cost Centers: Actual/Plan/Variance
Here my actaul cost want to update actumatically , is it possiable
can Anybody give me the solution
Regards
Sri

Hi,
What do you mean by 'automatic' update of actual costs? Whenever you will post a transaction on the activity type you have defined, you will create actual costs based on the tariffs you have provided.
Regards,
Eli

Actual Cost not updating to Network Activity from CATS

Dear All,
Am back here for the expert suggestions / guidance.
I am facing issue with respect to system not updating the actual cost in network activity / projects posted through time sheet i.e. CATS. I have planned my resource cost through work centre assigned with activity type, formula and cost centre. I have kept the employee master data in place with maintaining the 315 infotype. In CAT2 i am posting the respective time sheet on the particular network activity and am transferring the cost into projects by CAT5, the plan cost is getting updated but actuals are not hitting the projects.
Kindly do the needful and suggest me if am missing something out of the track
Thanks
Praveen Mohanachary

HI Gokul,
There wasn't any error during confirmation and i have also checked in CN30 as well as COFC transaction. It is posting the time and the activity is getting the PCNF status set but there isn't any actuals posted. I used CATA for some activity and also used CAT5 for certain activity both are not posting actuals on projects.
Thanks
Praveen B M

How can I use PowerShell 3.0 cmdlets or script to list all the local groups and local users of a server?

Using PowerShell 3.0 (And if possible the CIM, not WMI cmdlet), how can I script with | out-file C:\<filename>.txt or .csv option to list all local user accounts & local groups
on remote computers?
Thank You!

I don't recall PowerShell V3 introducing anything new to handle local users and groups. You need to use PowerShell V1 methods, using the [ADSI] accelerator and the WinNT: provider. The scripts linked above show this. No need to use WMI (which would probably
be slower).
Here is a script I've used to enumerate all local groups and their members:
$Computer
= "MyServer"
$Computer =
[ADSI]"WinNT://$Computer"
$Groups =
$Computer.psbase.Children | Where {$_.psbase.schemaClassName
-eq "group"}
ForEach ($Group
In $Groups)
    "Group: "
+ $Group.Name
    $Members
= @($Group.psbase.Invoke("Members"))
    ForEach ($Member
In $Members)
        $Class
= $Member.GetType().InvokeMember("Class",
'GetProperty', $Null,
$Member, $Null)
        $Name
= $Member.GetType().InvokeMember("Name",
'GetProperty', $Null,
$Member, $Null)
        "-- Member: $Name ($Class)"
A similar script to enumerate all local users would be:
$Computer
= "MyServer"
$Computer =
[ADSI]"WinNT://$Computer"
$Users =
$Computer.psbase.Children | Where {$_.psbase.schemaClassName
-eq "user"}
ForEach ($User
In $Users)
    "User: "
+ $User.Name
Richard Mueller - MVP Directory Services

ACTUAL COSTS:REPORT WITH STATISTICAL WBS AND ASSETS ASSIGNED TO THEM

Hi all,
I would like to run a report that gave me this info:
WBS Element (all statistical)
Assets assigned to each WBS
Actual costs
It would be perfect CJI3 but it doesn't show assets. In AM I haven't see either any report that shows WBS elements...
any ideas???

An statistical WBS element is an SAP object . Statistical means that you need another object to post the cost or income, let's say,an asset.
Actual costs are the real postings you have in an object, coming from MM, SD, GL ... (just the contrary as budget or planned values).

VAT FX and local currency for UK

Sales invoices that are not in the local currency still need to record the VAT amount in local currency, and this amount needs to appear in the VAT report. This is currently an issue with the UK VAT authorities.Can some one give me lead about this FX issue of Europe VAT please ?
Thanks in advance
Satya

What is the group currency and company code currency.
If the Company Code currency is GBP - all Finance documents will show the GBP amount, based on the values in the currency tables.

Actual Costing - CKME update in group and local currency - split

Similar Messages

Maybe you are looking for