How to show both SC and Local Currency in PLD at Amount place?

Hi sir,
I want to show both System Currency and Local Currency in PLD at the Amount Place.
And amount in Words also.
When i preview my PLD Report than it show the both SC and LC in Words.
So,plz help me sir.!

Hello jyotasna ,
Docuement total always in one currency depend on selected Customer or Vendor and if you want to in two currency then you should make UDF(User Define Field) for other currency.
also make FMS for calculation in this UDF .
If you want to amount in word in PLD then you should use ,select option Amount in words
for this configuration you should need workaroud.
Thanks
Manvendra Singh Niranjan

Similar Messages

I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

I thought I upgraded to Pro, but my account shows both Basic and Pro. How can I upgrade to Pro and cancel Basic without losing my forms?

Hi Rochdr,
You can use the following article to help you address this issue with your mail account in OS X:
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/kb/ts3276
Thanks for using the Apple Support Communities. Have a good one!
-Braden

SEM -BCS Trasaction currency and Local Currency

SAPGURUS
I have one issue , When the users are doing Half yearly BCS they see that for one company code for one item period values Local currency is diifeernt from
Transaction currency .
My question is why this Transaction currency is different from local currecny.
How to rectify this .
Are they missing any exchnage rate conversion .
Thanks in Advance .
are they missing any exchnage rate conversion .

Hi Dan Sullivan
Thanks for the quick reply .
One more question .
I see in the BCS T Curency as Euro and Local currency as Euro .
but the period values localy currency is different from Transaction currency .
I think the values should be the same if both T Currecny and Local Currency is same .
I also observed that this particular difference is happening only for 2 particular set of accounts . Those accounts are related to Intercompany related G L Accounts values .
I also observed that in the Break down category for these G L Accounts The break down structure category has defined as defaulted .
I would like to know what would be the cause for the above .
Thanks in Advance .
Ravindrareddy.P.

Foreign and Local currency balance difference in GL

Dear All,
I have a GL for Bank in which entries are posted manually through F-02. GL is maintained on company code currency (Say INR). The transactions posted are in foreign currency (ex USD).
when we check the balance of the account in FBL3N it is showing FC balance as zero and Local currency balance as 100 INR.
The above situation is due to the following
Received Amount 100 USD @ 40 = 4000 INR (manually posted JV)
Credited amount 100 USD @ 39 = 3900 INR (Manually posted through JV).
As both the activity is done through JV the system dint prompt for exchange rate difference account. So no my question is:
1. In this scenario, is there any why the system can automatically post entry to exchange rate difference Or posting Manual JV is the only way out.
2. What is the use of Tcode F.05. What it actually does.
Thanks for your valuable time.
Please let me know if you need any additional details
Regards
Naveen

Hi
Since you do not have any parallel currency, The balance of 100 INR in Local Currency is correct. There is no need to write it off.
My understanding is that the transactions are as below.
Transaction    Doc Curr   Doc Curr Amt      Loc Curr     Loc Curr Amt
1                     USD            100.00                 INR                4000.00
2                     USD           -100.00                 INR              -3900.00
Balance                                0.00                                          100.00
You have a Bank Account which is maintained in INR.
In first transaction, you have a receipt of 100$ and bank has applied a rate of 1USD = 40 INR. So the balance is 4000 INR.
Then you have made a payment of 100$ and bank has applied a rate of 1USD = 39 INR. So you still have 100 INR.
That is not a gain or loos. It is valid balance.
Thanks
Prasad
Edited by: Prasad Neelisetty on Dec 23, 2009 8:35 PM
Edited by: Prasad Neelisetty on Dec 23, 2009 8:36 PM

Unread Emails in Outlook 2010 Clients shows both UNREAD AND READ emails when connected to Exchange 2013 Server SP1

We recently upgraded to Exchange 2013 SP1 with a client user-base of Office 2010 Professional Plus / Outlook 2010 SP3.
All Unread Email favorites folders show both Unread and Read emails, just like the inbox. Removal of the folder and recreating yields the same results, as does creating a custom folder. However, in Outlook 2013 there is no problem.
Is there a patch or hot fix for this issue? Or does anyone know how to fix this issue so that the UNREAD EMAILS SHOW UP IN THE UNREAD FOLDER AND NOT INCLUDE THE READ EMAILS?
Thank you!
Kim Parker-Polito / Newhall Land

Go down to Search Folders
- Right click on Search Folders and create New Search Folder leave default "Unread Mail1" and click OK
- Right click on the new “Unread Mail1” folder and choose “Customize this search folder”
- Click on Browse
- Select the checkbox for “Search subfolders”
- Press OK and OK again.
- Right click on old "Unread Mail" Folder and delete.

Diplay Functional,Reporting and Local currency

Hi,
I've a requirement to display Transactions in functional,Reporting as well as in Local currency.Do I need to setup Oracle 11i Env in MRC for that?If so how to get the transactions displayed in Local cuirrency ?Do I need to Covert them or I've to create new set of books for the same like we create one for reporting currency?
This requirement is for 11.5.10.2 as well as R12
Thanks,
Mahender
Edited by: user518071 on Jul 30, 2010 6:20 AM

Hi
You need to do the following
In 11i
1. You need to set up Reporting Set of Books to get the transactions and reports in Reporting currency for Local Currency, Functional Currency.
2. If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
In R12
1. You can set Reporting currency if you need the transactions and reports in Reporting currency provided Chart of Accounts, Calendar and Convention is same.
If your Functional Currency is USD, Reporting Currency is EUR and Local Currency is AED, then you need to set Main SOB in USD and Reporting SOB in EUR and AED.
2. If the requirement is not only currency but you need for a different Calendar or COA or Accounting convention, then you need to set a Secondary Ledger
Hope this helps
Regards
Sivakumar

Actual Costing - CKME update in group and local currency - split

Hi Experts,
We are using Actual Costing and running CKMLCP and CKME to update our standard price, in local currency and in group currency.
The result it is one PR accounting document, with group currency and local currency booked in it.
Now, we have this requeriment where they want to have 1 PR document with local currency booked and $0 group currency and another PR document with local currency as $0 and Group Currency booked.
It is like doing MR21 and not doing automatic translation into foreign currency, that is what we want.
So, the question is, Is there a way of archiving this in a simple way?
Thanks for your comments!
Enrique

Hi Enrique,
The final step in CKMLCP enters future prices for all materials based on the actual prices of the period.
You could Use CKMPRPN the 'maintenance of future prices' with it's rule based approach to change the data before activating with CKME.
You could
1. delete the group currency future prices (CKMPRPN)
2. release the new standard prices in company code currency (CKME)
3. create future prices in group currency by adopting the (previous month's) V-price as future price (CKMPRPN)
4. release the new standard prices in group code currency (CKME)
I am not sure if you could also distinguish the validity dates between both currencies with CKMPRPN. If yes, that might be better than deleting and rebuilding the price.You could change the date for one currency into the future, use CKME, change the date back and use CKME again.
A disadvantage of the procedure would be that you will not release the cost component split from CKMLCP. In step 4 only the new price will be released and the split will be created from the former split. In step 2 the original split from CKMLCP will be activated.
best regards,
Udo

I updated my iPod and now, two movies, which were purchased in iTunes and have/show both HD and SD versions are no longer syncing to or playing on my iPod.

I updated my iPod and now, two movies, which were purchased in iTunes and have/show both HD and SD versions are no longer syncing to or playing on my iPod.

Which version of iTunes are you using?
What is your iPod firmware number as shown in the iTunes summary page?
Is there any error message when you try to sync the vidoes?
Have a nice day!

How to populate both key and text in drop down list in dialog prog screen

Hi, Can anyone please advice how to display both key and text in the drop down list in dialog prog screen. I tried with below code. keys and texts are getting populated in values table but only text is appearing when click on drop down. need to display both key and text in the drop down. Thanks in advance.
TABLES: ZRPP_MODELS, ZRPP_FFLSTRATEGY.
TYPE-POOLS : VRM.
DATA : field_id TYPE VRM_ID ,
       values   TYPE VRM_VALUES,
       value    LIKE LINE OF values.
FORM fill_model_list .
select MODEL MODEL_DESC from ZRPP_MODELS into value.
    APPEND value TO VALUES.
endselect.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id     = 'ZRPP_MODELS-MODEL'
      values = values.
ENDFORM.

You need to concatenate KEY & VALUES
wa_values-key = '1'.
wa_values-text = '1 - One'.
append wa_values to i_values.
wa_values-key = '2'.
wa_values-text = '2 - Two'.
append wa_values to i_values.
wa_values-key = '3'.
wa_values-text = '3 - Three'.
append wa_values to i_values.
call function 'VRM_SET_VALUES'
    exporting
      id              = 'LIST_BOX'
      values          = i_values
    exceptions
      id_illegal_name = 1
      others          = 2.
a®

How to show rating dots and file name underneath thumbnail in Bridge CS4 preview workspace?

How to show rating dots and file name underneath thumbnail in Bridge CS4 preview workspace?

Thank you! That was it. The option to change it is not available in preferences (though I believe it was in early CS versions). It's hidden in a dropdown menu associated with an icon at the top. It sure wasn't easy to find, and I probably would not have done so without your lead. Thanks again!

Report to retrieve balance sheet accounts in foreign and local currencies?

Hello,
I have question regarding the availability of a report in SAP. I am wondering if a report exists in SAP to retrieve the total outstanding balances on any given date for all the balance sheet accounts (including GRIR trade) in both functional and foreign currency.
I am currently using the FAGLL03 to do this but the problem is that this report is timing out when I select too many accounts.
Does anyone know if such a report exists in SAP (besides the FAGLL03 which takes too long to run)?
Thanks in advance for your answer.

Hi
A quick way is to run FAGLL03 in the background as a scheduled job.
Regards
Sanil Bhandari

How to print both normal and bold data in a single line

Hi ,
I have requirement wherin the data need to be displayed in a single line.
FAX: Z8525_text.
where FAX needs to be in bold and Z8525_text is a standard text and it shoould not be bold , both of this needs to be displayed in
a single line.
Can you let me know how to print both normal and bold data in a single line one of which is coming fro standard text.
Regards,
Senthil

Hi Senthil,
If you are using smartforms, have a character format created for BOLD and apply it to the text you want to highlight. The remaining text of the line could be applied with a Character format which is not highlighted.
Try and revert in case you need further assistance

"The file [name of file] may have been changed by another user since you last saved it." Issue affects both network and local files.

When a certain user saves a file in Excel 2010, she gets a message: "The file <name of file> may have been changed by another user since you last saved it." She can choose to save as another file or overwrite with her changes.
This just started happening a week or so ago. She was concerned that someone else was accessing her files, but we did several tests that opened, made a change and saved in a matter of seconds, and she still gets the message. It happens on
most files, but not all – both network and local.
We already tried the QFE_Saskatchewan registry fix. I also checked the file server for Services for Macintosh.

You may be confused by the error in Excel saying “another user”. Actually Excel cannot tell who (the real human) is editing the file. Based on my research the No.1 possibility of the error is KB2626998.
2626998 Connection to a network document is lost in the 2007 Office system or in Office 2010 after the computer resumes from standby
http://support.microsoft.com/kb/2626998
For Excel 2010, follow these steps:
a. Click Start , click Run , type regedit in the Open box, and then click OK .
b. Locate and then select the following registry subkey: HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Excel\Options
c. On the Edit menu, point to New , and then click Dword Value .
d. Type NetworkAvailableTimeInSeconds , and then press Enter.
e. Right-click NetworkAvailableTimeInSeconds , and then click Modify .
f. In the Value data box, click Decimal , type a number value, and then click OK .
Note This registry subkey sets the time, in seconds, that Excel waits for the network to resume. For example, if you type 15 for the number value, Excel waits 15 seconds for the network to resume. You might have to do some tests in your own environment to
determine an appropriate value. You may have to try multiple numbers.
g. Locate and then select the following registry subkey.
HKEY_CURRENT_USER\Software\Microsoft\office\14.0\common\Internet
h. Repeat step 2C through step 2F again. Reuse the same value that you used previously.
i. Exit Registry Editor.
Feel free to post back. Thanks.
Cheers,
Tony Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please contact
[email protected]

How to show company name and contact name on the incoming calls of iPhone 4

Kindly provide me with a useful solution of how to show company name and contact name on the incoming calls of iPhone4.
even with an application or from the setting of the iPhone itself, but without telling me a solution like writting the company name in the contact name field.
This is a very important option, i think it is a must, not an option and apple should fix this problem fastly. because it is already available in the older models of iPhone like iPhone 3G and 3GS.
How an important feature like this could be available in old models, but in the later models is not available?

Currently not possible without putting the company name in the contact name's field. AFAIK, it's never been available on any iOS version.
You might check the App Store for an app that can do this although I'm pretty sure you won't find one.
http://www.apple.com/feedback/iphone.html

In Journal can i specify the Foreign currency and local currency amount?

In Journal Entry can i specify the Foreign currency amount and local currency amount?
I tried the following code it is working fine using DIAPI.
Here the Local currency and the System currency is SGD. And the Journal is for USD.
oJnl.Lines.FCDebit = 120.10
oJnl.Lines.FCCredit = 0
oJnl.Lines.FCCurrency = "USD"
oJnl.Lines.Debit = 120.10
oJnl.Lines.Credit = 0
oJnl.Lines.Add()
oJnl.Lines.FCDebit = 0
oJnl.Lines.FCCredit = 120.10
oJnl.Lines.FCCurrency = "USD"
oJnl.Lines.Debit = 0
oJnl.Lines.Credit = 120.10
oJnl.Add()
But, the above way of doing is not working if i pass this Journal through B1.
B1 is not allowing to change the local currency amount, Local currency amount is automatically calculated based on the FC amount and the Exchange rate.
So Can i use the DIAPI to do this? is this right to do?

Solved.
In Journal Entry window, please kindly go to Form Settings/Document/
Table tab page/ Convert Amounts According to Rate upon Exit:
Clear the checkboxes 'From LC Field' & 'From FC Field', then the Local
currency amount will not be automatically calculated based on the FC
amount and the Exchange rate.

How to show both SC and Local Currency in PLD at Amount place?

Similar Messages

Maybe you are looking for