Actual values & Plan Values Entry in the same Input Ready Query

Hi Gurus,
I have a problem about preparing input ready queries with combination of actual data and plan data together. Forexample :
I want to plan my sales quantity for estimate months ( 9,10,11,12 ). But in same query, i want to show sales quantities in actual months (1.....8 ) . I have one key figure : Sales Quantity and two versions : Actual and Plan. And restrictions are like below :
Actual Sales :
Key figure : Sales Quantity
Version : Actual
Fiscal Periods : 9,10,11,12
Fiscal year : 2008
(values cannot be changed)
Plan Sales :
Key figure : Sales quantity
Version : Plan
Fiscal Periods : 1.....8
Fiscal Year : 2008
(values can be changed by inputs or planning functions)
I did those restrictions to key figures in ''columns'' area in BEX Query Designer. And i also added 0FISCPER3 to ''columns'' area in order to see periods in query.
I expect to see a 12 months period, which has 8 months actual and 4 months open for planning.
But when i execute the query, it shows me two 12 months periods. Like, Actual Sales 1......12 and following Plan Sales 1.....12 side by side. But i want to combine those two 12 months periods in one year.
Where do i make mistake? or is it how system works?
I would really appreciate for your answers.
Thanks,
Fatih...

Hi,
Actions in details:
1. Run BEx Analyzer, connect to the system;
2. Open the workbook;
3. Workbook is opened, press the button "Design Mode";
4. ALT+F11 for opening VB Editor;
5. Insert new module "Module1" in project of my workbook (not in BExAnalyzer.xla);
6. Write the code of macros "ON_BEX_REFRESH";
7. Close the VB Editor window;
8. BEx Analyzer window is still in design mode, press the button "Workbook Settings";
9. In "General" tab mark the checkbox "Refresh Workbook on Open";
10. In "Exits" tab mark the radiobutton "Invoke macro on refresh" and write "ON_BEX_REFRESH" in the textbox;
11. Press the button "Attach Macros", appears the message "VBA Macros have been succesfully Attached to the Workbook", press OK for accepting the message;
12. Press "OK" to close the Workbook Settings window;
13. Press the button "Exit Design Mode";
14. Click on right mouse button on table (on inserted query), choose "Transfer Values";
15. If macros is working, press "Save Workbook".
I'm using BEx Support Package 16. Therefore it is possible, if I remember correctly, that in older versions of BEx the names of some tabs in workbook settings are different.
If you are using older version of BEx and these 14 steps don't help you, then try to do the following in next steps:
15. Press the button "Design Mode";
16. Open Analysis Grid Properties (select table, click on right mouse button, properties);
17. In 'General' tab do so that none checkbox is marked;
18. Press OK;
19. Press the button "Exit Design Mode";
20. Click on right mouse button on table (on inserted query), choose "Transfer Values";
If now macros is working then you can start to find out which checkboxes you can mark and which have to be unmarked in Analysis Grid Properties.
In my case 3 checkboxes is marked: "Apply Formatting"; "Allow Navigation"; "Display Hierarchy Icons". As I mentioned above it is in BEx SP16, if you have older version then you have to find out the checkboxes which you can use, which not.
Regards,
Ainars

Similar Messages

Input-ready query; Layout dependant on variable value

Hello,
I need to create an input-ready query where I have months Jan-Dec in colums. If the planner gives a variable value for the planning period for example April, he should get a layout where he can plan for April-Dec and view the values for Jan-March. How can I create this kind of input-ready-query? Thanks in advance. Points will be assigned.
Regards,
Marika

Hi Marika,
Step1: You need to create a variable (with user restriction), you can provide fixed values for all months of the year, perhaps on 0CALMONTH. You will get the text displayed when you select the month number in the planning folder where u use it. Say WM1 is the name you gave.
Step2: Create 2 exit variables. 1st one would check the entry by the user from WM1. If the period is > January, store all the months starting from January to the month preceeding to one selected in WM1. Set this as WM2.
In the second exit variable, the code must check for which month user has selected to start planning from and store all months starting from and ending December in it. Set this as WM3. You will have to create these 2 variables on 0CALMONTH again.
Step3: Now, in the Layout builder, 1st screen, for the additional settings, in the data columns tab, select 0CALMONTH for dynamic.
Step4: In the second screen of Layout builder, create 2 rows for the data column settings. First row would be set for comparison. Check dynamic box. Assign WM2 as the variable for 0CALMONTH here.
Second row would be for planning, but check dynamic box here again and assign WM3 as the variable for 0CALMONTH here.
You must be having WM1 as the variable in header.
In the 3rd screen you will find just 2 data columns displayed.
When you run the layout, user prompt will insist you input the desired month and layout on further opening, will bring in the desired data as you require from the Cube.
I hope you have ur actuals and plan data both in the same cube. Else you have to assign separate cubes for plng area in comparison and plan settings in the 2nd screen of builder.
Hope this will help solve ur problem.
Regards,
Aby

Integrated Planning input ready query

Hi All,
I am new to integrated planning. I have created an input ready query with key figure "revenue" ready to input.
When I run the query, I can change the revenue figures, but the save button is greyed out.
Is this an authorization issue or am I missing something?
Any help is appreciated. Thanks!

Hello Payal,
I sugguest to read the documentation on help.sap.com about BI Planning; the documation contains an example how to create a planning application with BEx Analyzer.
I did not mention what UI you are using, BEx Analyzer oder BEx Web Analyzer. In both cases there is no default save button, you have to create it, e.g. in the design mode of BEx Analayzer oder for the BEx Web Analyzer in the WAD (Web Application Designer).
Regards,
Gregor

How to use the same variable value for data entry and the planning sequence

Hi,
the scenario is the following:
Using the WAD template a user enters cost center plan data. The cost center is selected by the chosen value for the variable "V1".
Afterwards he shall push a button which starts a planning sequence (including saving the data and further functions). This planning sequence uses a filter that also contains the variable "V1".
What or where has it to be defined that the planning sequence uses automatically the same value for the variable "V1" as selected for the data entry?

You have to define in the planning function. The planning sequence is only a sequence and it read the planning functions underneath it.
Ravi Thothadri

Tables req: Actual and planned values

Hello Experts,
I would like to create a new zprogram, which will give me output.
Cost element- planned values- actual values-. Day1 actual cost -day2 actual costu2026day31 actual cost.
Can any one tell me in which tables the planned(KP06) and actual data will be stored?

Hi,
Actual and plan values on line item level are stored in COEP. COSP is the table for totals (again for both actual and plan). You distinguish between the two by 'Value type' field.
Regards,
Eli

How do I edit or enter values on multiple sheets at the same time in Numbers? I can do this Excel but don't know procedure in Numbers. Thanks.

How do I edit or enter values on multiple sheets at the same time in Numbers? I can do it in Excel but I don't the procedure in Numbers. Thank you!

The only I way I can think of to modify a single value and have that value change in multipl locations is to have all "the other places" reference a single cell. There is not way without a referene to modify a set of cells simulateously.
This may be something like what you want:
Enter a value in the table "Original Data" cell A1 and the A1 cells of tables Ref1, Ref2 and Ref2-1 will change

How to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part

Hi,
I want to pass multiple query string values using the same parameter in Query String (URL) Filter Web Part like mentioned below:
http://server/pages/Default.aspx?Title=Arup&Title=Ratan
But it always return those items whose "Title" value is "Arup". It is not returned any items whose "Title" is "Ratan".
I have followed the
http://office.microsoft.com/en-us/sharepointserver/HA102509991033.aspx#1
Please suggest me.
Thanks | Arup
THanks! Arup R(MCTS)
SucCeSS DoEs NOT MatTer.

Hi DH, sorry for not being clear.
It works when I create the connection from that web part that you want to be connected with the Query String Filter Web part. So let's say you created a web part page. Then you could connect a parameterized Excel Workbook to an Excel Web Access Web Part
(or a Performance Point Dashboard etc.) and you insert it into your page and add
a Query String Filter Web Part . Then you can connect them by editing the Query String Filter Web Part but also by editing the Excel Web Access Web Part. And only when I created from the latter it worked
with multiple values for one parameter. If you have any more questions let me know. See you, Ingo

Can i use one JSF component's value for other component in the same page.

Can i use one JSF component's value for other component in the same page.
For example
I have a <h:selectBooleanCheckbox id="myChk"> in my jsf page, i want to access its value for another component like:
<h:commandButton disabled="#{myChk.checked}" action="myAction" value="myValue" />
** "myChk.checked" >> I am just asuming "checked" property is available...

Bind the checkbox to a UIInput myChk property. Then you can reference this property from the page, e.g.
<h:selectBooleanCheckbox binding="#{myBean.myChk}" onchange="submit();" />
<h:commandButton disabled="#{myBean.myChk.value}" action="myAction" value="myValue" />

Value to multiple sprites through the same parameter

I'm going to ask the same question "
"contains" doubt in hexadecimal color value?" but in a
different way, because I figured out that the solution is simpler
that I thought, and the solutions goes by other way. I have this
behavior:
property pTargetSprite, pBlendValue
on getPropertyDescriptionList me
list = [:]
addProp list, #pTargetSprite, [#comment: "Target Sprite:",\
#format: #integer, #default: VOID]
addProp list, #pBlendValue, [#comment: "Blend Value:",\
#format: #integer, #default: 100]
return list
end
on mouseDown me
sprite(pTargetSprite).blend = pBlendValue
end
I would like to enter MULTIPLE sprites for 1 parameter, that
is to say when the dialog box of the behavior appears and ask me
the "Target Sprite:", I would like to input ...let's say 1 , 2 , 3
, ... whatever numbers I want. Therefore, the blend values of that
sprites will change according to the input Blend Value. Right Now
is working perfect, but of course with only ONE sprite, but I want
to be able to assign that Blend Value to multiple sprites over the
same parameter.
I guess it must be very simple, but I cannot get the answer
anywhere in my brain, nor my director book, nor in the forums.
Thanks!!!

You have several options here. You can do as you suggest,
create a list
of the sprite numbers to change and then tell each of those
sprite's
blend value to change.
Another method is to write a function in the behavior that
you attach to
each sprite and then use sendAllSprites() to fire each of
those
functions. If you are attaching behaviors to each sprite this
may be the
way to go.
For method 1, you could amend your behavior like this:
property spriteList
property blendValue
on getPropertyDescriptionlist
myPropList = [:]
myPropList.addProp(#spriteList,[#comment:"enter the sprite
channel
numbers to use, separated by
commas:",#format:#integer,#default:"1,2,3"])
myPropList.addProp(#blendValue, [#comment: "Blend Value:",\
#format: #integer, #default: 100])
return myPropList
end
on beginSprite me
spriteList = stringToList(spriteList)
end
on stringToList(thisString)
oldDelim = the itemDelimiter
the itemDelimiter = ","
thisManyItems = thisString.item.count
tempList = []
repeat with n = 1 to thisManyItems
tempList.add(thisString.item[n])
end repeat
the itemDelimiter = oldDelim
return tempList
end
on mouseUp me
thisMany = spriteList.count
repeat with n = 1 to thisMany
sprite(n).blend = blendValue
end repeat
end
for method 2 you could use something like this in each
sprite's behavior:
property blendValue
property thisSprite
on getPropertyDescriptionlist
myPropList = [:]
myPropList.addProp(#blendValue, [#comment: "Blend Value:",\
#format: #integer, #default: 100])
return myPropList
end
on beginSprite me
thisSprite = me.spriteNum
end
on changeValue me
sprite(thisSprite).blend = blendValue
end
and then you can call this second method from a mouse event:
on mouseUp me
sendAllSprites(#changeValue)
end
and every sprite that contains that function in the frame
where it is
called will execute.
Rob
Rob Dillon
Adobe Community Expert
http://www.ddg-designs.com
412-243-9119
http://www.macromedia.com/software/trial/

Extract the x,y values of two cursors in the same xy graph

I would like to extract the x,y values of 2 cursors in the same xy graph. The problem is i arrive to extract the value only for one curso. How can I do to extract the value of the other cursor ?
Regards,
Sylvain
Solved!
Go to Solution.

Property nodes operate top to bottom, so all you need to do is change the "active cursor" property first. Here are two possibilities.
Message Edited by altenbach on 08-07-2009 09:04 AM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
ActiveCursors.png ‏8 KB

F110- not able to clear the debit and credit entry with the same reference

Hi,
I am not able to clear the debit and credit entry with the same reference in F110 even after having the payment terms as immediate payment, payment method is maintained in document no and vendor master data. Both debit and credit entry is appearing in FBL1N as an open item but it is not appearing in F110.
In Log message appear as 8 days grace period is existing whereas as payment term is just 0001- immediate payment.
Kindly advice me what could be wrong.
Thanks,
Manya.

Hi,
Credit and debit balance in vendor account are not cleared automatically when only vendor line item has payment method and credit memo has not payment method. Also when there is not payment method maintained in vendor master data.
In such case to avoid payment to vendor when vendor has debit balance we perform debit balance check.
In second scenario when u2018individual paymentu2019 is selected in vendor master data vendor invoice and credit memo are not cleared automatically in F110.
To setoff vendor credit and debit balance in F110 you to uncheck u2018individual paymentu2019 check in vendor master data > company code data > payment data.
Thanks!
Raju

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Multiple entries of the same topic in calendar

Hi, i am having trouble with my calendar, as in it displays multiple entries of 1 entry on the same day! eg. if i have one entry then it displays that same entry about 15-20 times on that same day in a list!!! can anyone help with this fault?

I'm having same problem but where there are duplicate calendar entries, one of the entries cannot be changed (doesn't have edit button)and the other entry can be changed. Needed to reschedule a doctor's appointment and wasn't able to delete b/c there isn't an edit button. So it stays there. Don't know which date is the new rescheduled date. I have iPhone 3g. Since iPhone4 my 3g is extremely slow too.

Web Matrix FTP Remote Connection Error - "Connection Error - Failure to get file list from server. An entry with the same key already exists."

Does anyone have experience with this issue when connecting to a Linux FTP Web Server running a FTP Site?
"Connection Error - Failure to get file list from server. An entry with the same key already exists."
I cannot access the root directory of the ftp file server using Web Matrix 3. The site is .php based, and
is accessible when connecting with FileZilla or Remote Connecting via FTP with Visual Studio.
All sites have been deleted from Web Matrix, the user Application Data has been cleared and Web Matrix has been reinstalled.
Issue Persists....
Thanks in advance,
Justin

Turns out that the program leaves metadata in your app data folder that is not removed upon uninstallation of the software.
This is incorporated to communicate with a file that uploaded into the ftp directory when publishing pages.

RGDIR already contains an entry with the same logical key

Hi Gurus,
We are getting the error"RGDIR already contains an entry with the same logical key" when we re-run the payroll in ECC 5.0
Is this a Standard bug in the Payroll program or else configuration error .
Found some note :776262 related to the same error in 4.0 to 4.7.But not for ECC 5.0.
Let me know if there are any support packs available...
Best Regards,
Srikanth

Hello Srikanth,
Regarding your description, it seems there is an inconsistence in the payroll results.
To analyze the exact problem in the cluster of this employee, You can run the report RPUDIR00.
Additionally, you can make a test using the standard payroll schema, to see if you get the same error message.
Kind regards,
Graziela Dondoni

Actual values & Plan Values Entry in the same Input Ready Query

Similar Messages

Maybe you are looking for