AD Hoc increases in ECM

Hi experts
How would a client do an adhoc increase using ECM?
Kind regards

Hi,
Normally, the ECM programs are set up to allow entries for adjustments during specific time periods.  If you want to utilize the functionality of ECM and allow managers to enter increases at any time, you would have to set up a review with open ended dates ( to 12/31/9999) or a separate one for each year (1/1/2011 to 12/31/2011).   You could title this review "Ad Hoc 2011" or "Outside Normal Period". 
In our company we have a set annual review period and any changes outside that period require a PCR and multi-level approval.  We do not use ECM for changes outside the review period. 
Paul

Similar Messages

  • Increasing the rowcount in ECM Planning table

    Hi,
    We are using ECM in our portal and we have a requirement to change the rowcount for the table in Planning iview.
    Corresponding webdyno for java component is mss~ecm.
    right now standard functionality in planning iview is showing 10 rows in the table and we want to change that rowcount.
    when we tried ctrl+right click we were able to change but only for that user and only for that session.but we want to change that for all the users .
    Please let me know what is the solution for changing the rowcount
    points will be rewarded for sure
    Thanks
    Bala Duvvuri

    Try the role-based (administrator) personalization. Log-in as admin into the Portal, open the "Content Admin Studio", navigate to the iView containing the Web Dynpro application and open the "preview". Then invoke the personalization UI via CTRL-Right-Click. You should now see the administration UI and be able to change all properties of the UI elements including the table's visible row count. These settings will be persisted and apply to the application automatically.
    Armin

  • Windoze Ad-hoc networks killing Airport Extreme Base Station

    After having a horrible experience with an Orinoco base station sometime ago at his coffee shop, a client of mine asked me to install a new Wi-Fi access point to replace it. Since I'd never had a problem with my graphite Airport Base Station, I selected recommended that he try the Airport Extreme. Everything was been fine for over a year and half, with only the occasional interference problem, and even that easily fixed by a restart on the base station. Lately that has changed. We're in Baton Rouge, and since Hurricane Katrina, our population in our city has doubled (that's not an exaggeration), and the number of customers using the network in his coffee shop has increased as well - although it's still well below the maximum. The problem is that there are is large number of students from Loyola, UNO and Tulane who are now attending LSU, right across the street. And a significant fraction of those have ad-hoc networks set up on their Windoze notebooks, apparently unintentionally. When they come into the coffee shop their ad-hoc networks seems to cause the Airport Extreme to die, and not recover, until it is reset. This happens many times per day, sometimes more than once in an hour.
    It had been configured to automatically select a channel, but I re-configured to use a specific channel (and have been experimenting with the particular channel). It seems to reduce the problem for a time, but then we'll have the problem back in force within a few days.
    I have verified (using iStumbler) that there are no other "managed" networks near-by, and I have noticed that the problem ALWAYS happens when there is are ad-hoc networks, and after politely asking customers if I can check their settings, (it's scary how many people will let you poke around on their computer, if you seem like you know what you're doing) I've also seen compelling evidence that it is Windoze users, not Mac users, who tend to cause the problem. Incidentally at this particular coffee shop the Windoze:Mac ration is something like 60:40. What can I say, it attracts discerning customers. Since some of them have "lsuwireless" set up as an ad-hoc network (and as I said, LSU is across the street), my guess is that somehow these get set up, not on purpose, but accidentally, while trying to connect to the university's wireless network. Apparently the process is not so straight forward for Windoze users as for Mac users.
    I have upgraded the Airport Base Station software to the latest available as of last week. Though I don't have that version number available at the moment.
    So I have several questions:
    1) Is this really the same radio interference problem that I've read about elsewhere on this discussion board?
    2) Would an external antenna on the base station help? How about a powered one?
    3) Aside from "Use Interference Robustness" and trying different channels, is there some configuration setting that I might be missing that could enhance the base station's reliability?
    4) Does anyone have a suggestion for a permanent fix - preferably without switching to a different access point, although at this point, that's a viable alternative. After a year and a half of stable operation though, we're loathe to switch again unless it can't be avoided, because the Orinoco access point we used before had behaved exactly like this, but even worse, and without necessarily having ad-hoc networks being present to cause the problem.
    5) Failing any other good solution, can anyone suggest a way to determine which computers are causing the problem without having to interrupt each customer to poke around on his computer?

    I have an Intel based iMac and a MacBook Pro. Both
    are (well until tonight) connected to the internet
    wirelessly through the Airport Extreme Base station.
    I've had no trouble up until now. Tonight for some
    odd reason the MacBook Pro Airport card fails to
    detect the Airport Extreme Base Station. It detects
    OTHER wireless networks around the building, just
    not the one it's supposed to connect to. Opening up
    Airport Utility doesn't even show the Airport
    Extreme Base Station being present. I know the Base
    Station is not at fault - it works fine with the
    iMac. Tried setting the Sharing mode on but that
    didn't help either (not that I changed any of the
    settings to begin with).
    Can anyone help? I'm really at a loss here.
    Any one? Any suggestions?

  • Increasing no of culumns in a BEx report

    Hi all,
    I want to increase the number of culumns in our BI report so that all the fields are visible on the first page itself.
    Can you please help me on this ?

    All your query display uses web templates as default to display query results so you need to change that in case you need more columns.
    Check transaction RSCUSTV27 to see what is maintained as your default web template to Ad hoc analysis (if it is blank then you are using 0QUERY_TEMPLATE. You need to open this up and change the settings for the table item. You can either make changes on this template, or make a copy of it and change there. In the latter option you will need to set your copied template as the Ad hoc analysis template then.
    How to :
    How to Enhance SAP BEx Web Analyzer (0ANALYSIS_... | SCN
    Cheers,
    Suyash

  • New salary is not updating in MSS Compensation Planning (ECM)

    Hi
    In MSS Compensation Planning (ECM) iView, when we are applying a percentage increase for a particular employee the new salary column is not updating when we press enter or recalculate. The value is changing intially when we press refresh property for the iView, for the next time the value is not changing even when we press the refresh also.
    Regards
    Suresh

    Hi Suresh,
    What is the solution..
    because we are also facing a similar issúe ..
    our new salary is same as the compensation amount....
    but what we are looking for is
    new salary = compensation amount +annual base salary
    Where do we do this?
    tks rgds
    g3

  • Number of rows to be displayed in Compensation Planning iView in ECM

    Hi Experts,
    I want to increase a number of rows to be displayed in the Compensation Planning iView in ECM from 5 to 10. How do I do that? Thanks!
    Anthony

    We can set the numnber of rows to be displayed by using the standard table UI of java web dynpro. Thanks!

  • Editable column in ECM(compensation) not possible,but what happens in EHP4?

    Hi all,
    I've been reading in the forum that it's not possible to create an editable custom column in the ECM Compensation and of course I haven't been able to get it.
    But, I'm working in MSS 6.0 EHP2, does anyone know if it is going to be possible to do this in EHP4?? I know that the funcionality of ECM in EHP4 has been increase a lot.
    Any news about it??
    Thanks,
          Juanjo

    I am a little confused because this is an editable region called "head" that makes changes to the footer.  I don't think i will be able to explain WHY this is so for a while, but at least i will be able to see what is wrong and give the solution.
    You are embedding a stylesheet in the editable region called 'head'.  That stylesheet sets the style for the element called "footer" by specifying the background image to be used.  It's quite straightforward.
    What was really freaky:  entering the url for the background image in the style sheet as "/path/to/your/image.jpg".  Lordy i didn't think that could be the literal thing i was supposed to enter!     
    It's not.  You were supposed to alter that to match the path from your site's root to the desired image.
    Where did you find this gem of information?
    It's just basic CSS, really.

  • How to set a sheet as Ad Hoc via VBA ...

    We keep trying to convert our existing workbooks for Smart View.
    As you can imagine this is a nightmare process but we keep trying ...
    There is some progress and we learnt a lot on the way but we still face some major issues - we find SV with VBA to be an unpredictible combo.
    Anyway ...
    In simple words I use a sequence of VBA SV API calls to create private connection (HypCreateConnection), to connect the sheet (HypConnect) and to retrieve data (HypRetrieveRange) - along the way I set up SV options and hide the Panel and the POV.
    All "by the book" - I wish such "a book" ever existed ... I mean the documentation is far from "in depth" ...
    The process works in c. 80% of cases (i.e. grids) but it fails on some (so far I found no correlation with anything else)
    I have tried and tried all sorts of tricks to debug it.
    It works with ALL grids in 1 in 20 tests but you can never predict when and why.
    So it can work but something somewhere causes the process to fail on some grids in most of the tests.
    I noticed one detail ...
    While the sheet gets connected and retrieved  with our process the Sheet Info still shows the sheet status as Empty ...
    When working from a blank worksheet and with the Panel open (i.e. NOT via VBA) one of the steps is to click on Ad Hoc Analysis button.
    It is unclear to me what exactly this one step does and it does not seem to be connecting or refreshing the grid.
    It seems it defines the grid to be an Ad Hoc one.
    Can the same be achieved programatically via VBA ?
    So far I have NOT found any equivalent API call.
    In desperation I am going to replace all HypRetrieveRange calls with HypMenuVRefresh call.
    Would it define the sheets as Adf Hoc ?
    I will find out ...
    Will it help with some odd grids ?
    Fingers crossed it will.
    Regards

    Hi Deiter,
    You can achieve this with below steps.. I am giving below steps considering you want
    to keep the condition type set as Obligatory always in your Pric Procedure
    -> Write a custome routine for "Requirement Routine" with the logic : When item category
        is ZAN, remove "Obligatory" check from KOMT1-KOBLI.
    -> Assign this routine to condition type ZZ00
    you are ready to go now.
    Why i am suggesting this...
    -> Industry best practise, to write minumum codes in user exits (in this case it will be sales user exit),
        as it increases system response time
    -> If we change someting in user exit, imagine, everytime you are creating a Sales Order, which does
        not call for this pricing procedure (with cond typ: ZZ00 ), still this part of user exit code written
        to check if item cat is ZAN or not will be called, so why to make system work more when
        actually not required
    Hope this helps !
    Regards
    Subhajit

  • Ad Hoc Query Designer - Web Application

    Hello,
    I have created a Web application that has the 'Ad-Hoc Query Designer' item.
    When I go to create a new query I don't have the option (or I can't find it) to use any variables.
    Like in Analyzer I can run a query and it will ask me the values for the variables I have embedded in the query.
    How do I make that work using the 'Ad-Hoc Query Designer'
    Also I have problems with the application timing out, what timeout variable needs to be adjusted?
    Thanks,
    Nick

    You have to run the Launch query in browser from the query designer window, it will be the second icon from the top. This will open up the query in a browser and if the query has a selection screen the browser will launch the selection screen.
    For the application timing out, it is a parameter that has to be set in the instance profile of the BI application server. You can ask your basis team to increase the parameter 'rdisp/j2eetimeout'.
    Hope this helps
    EmJay
    Assign points if helpful

  • ECM Plan with no budget, planning, or approval for hourly union employees

    We are implementing Enterprise Compensation Management at my company.  We are on 6.0 Ehp5.  One of our requirements is for a General Increase Plan (Salary Adjustment) for union employees.  There is no approval process for this plan.  Once top leadership has approved the increase (outside of SAP) every eligible employeeu2019s base pay is increased by the same percentage.  Also, this group of employees has fixed pay per job.  We use table T510 to store their pay scales and levels.  So we normally increase the values in T510 by the approved percentage and then create new IT0008 via mass upload. 
    Since we are implementing ECM and want this plan to be administered through ECM, my question is about how that should work.  I was thinking that we would use PECM_CREATE_COMP_PRO to create the Compensation Process record and bring to the minimum.  I am not sure if this transaction looks at T510 or just T710 or the Planned Compensation (HRP1005).  I assume we would then use PECM_CHANGE_STATUS to change the status to u201CApprovedu201D (not sure if the IT0759 has to be in Appoved status before being activated).  Lastly we would use PECM_CHANGE_STATUS to Activate the Compensation Process infotypes.  Does this sound like the way to handle a plan where every eligible employee gets the same % increase or do you know of a best practice you could share?

    Hi Vishal,
    Nice to see your reply, i am having SAP_ALL permissions in the backend system, my user id was attached to employee, that employee is top level manager, i am able to see employees successfully in MSS 600 Compensation Approval WebDynpro JAVA application for Approval and Rejection, but i am not able to see employeed in MSS 604 (EHP4) Review Planning(Compensation Approval) WebDynpro ABAP application.
    When i am trying to execute that application even i am not able to see any errors, the screen looks fine, only in the table it displays " table does not contain data"
    If you have any idea please help me on this one.
    Thanks in Advance.
    Regards,
    Babu.

  • Can ECM work with T510?

    I am implementing ECM in an organization where they have their salary structure in Pay Scale (T510). The organization is not ready for migration to T710. Can ECM run on T510? I need this information ASAP as we are in a critical phase.
    Thanks and regards,
    Sanjoy

    Hi,
    Please let me update this post (in time).
    The problem is not using T710 or T510, however you must thing about Inditect or Direct valuation.
    In the direct valuation the amounts are saved in table PA0008 from infotype 0008 and could be read by ECM.
    In the indirect valuation the amounts are stored in tabele T510, T528C, T511k, etc, and cannot be read by ECM without a enhancement. Is very common work with INVAL through T510 but it is not exclusive.
    You must implement the Badi HRECM00_ACTIVATION to work with indirect valuation.
    You must use this Badi too, if you consider a salary increase for multiples waretypes.
    Regards,
    Eduardo Marcelino

  • Most Important Conference for Enterprise Content Management (ECM) marketplace in India

    Enterprise Content Management (ECM) is no longer just about
    technology, or just about content. It is about content, community,
    and context. The deluge of data and information, coupled with the
    ever-increasing need for compliance is forcing enterprises to take
    a strategic look at ECM and its associated disciplines. To stack up
    to competition, enterprises are looking up to faster, flexible, and
    efficient business processes that can channelise copious,
    unstructured information into meaningfully optimised, governed, and
    digitally delivered data that is available to the right
    stakeholders at the right time.
    C-level executives, senior IT process management personnel,
    marketing and content managers are looking to find the precise
    solution that will fit the needs of their organization. What are
    these available solutions, and how do they stack up to the needs of
    a specific enterprise? What roles do strategic topics such as
    Governance, Collaboration, Enterprise 2.0 play in the evaluation of
    these solutions? What is a promising approach, and how do I find
    the correct partners? The ECM track at Business Technology Summit
    2008 offers strategic, technical, and business insights into all
    aspects of ECM, including Business Process Management (BPM),
    Business Rules Management (BRM), Master Data Management (MDM), Data
    Warehousing & Knowledge Management, and Enterprise 2.0. The
    summit will be held 22-26 September 2008 in Mumbai and Bangalore.
    Summit website:
    http://www.btsummit.com

    * Ismael Ghalimi is the father of Office 2.0. He is also
    credited with creating the first standards-based BPMS?
    * Nitin Borwankar is the father of Data 2.0?
    * Alan Pelz Sharpe is an expert guest on BBC, CNN and ABC
    Television
    * Robert Marcus has been at the helm of technology at General
    Motors, Boeing, Rogue Wave Software, MCC and HP?
    * Peter Coffee, formerly technology editor at eWeek, has
    appeared on CBS, NBC, CNN, Fox, and PBS newscasts.
    * Kiran Datar co-introduced the concept of conferencing
    services in India
    * THAT YOU CAN REACH OUT TO ALL THESE CELEBRITY SPEAKERS AT
    BT SUMMIT 2008?
    VIEW THE COMPLETE SCHEDULE:
    http://www.btsummit.com/summitSchedule.html
    REGISTER NOW FOR AS LOW AS INR 2999/-:
    http://www.btsummit.com/registration.html

  • The Most Compelling Enterprise Content Management (ECM) Workshops in India

    Enterprise Content Management (ECM) is no longer just about
    technology, or just about content. It is about content, community,
    and context. The deluge of data and information, coupled with the
    ever-increasing need for compliance is forcing enterprises to take
    a strategic look at ECM and its associated disciplines. To stack up
    to competition, enterprises are looking up to faster, flexible, and
    efficient business processes that can channelise copious,
    unstructured information into meaningfully optimised, governed, and
    digitally delivered data that is available to the right
    stakeholders at the right time.
    C-level executives, senior IT process management personnel,
    marketing and content managers are looking to find the precise
    solution that will fit the needs of their organization. What are
    these available solutions, and how do they stack up to the needs of
    a specific enterprise? What roles do strategic topics such as
    Governance, Collaboration, Enterprise 2.0 play in the evaluation of
    these solutions? What is a promising approach, and how do I find
    the correct partners? The ECM track at Business Technology Summit
    2008 offers strategic, technical, and business insights into all
    aspects of ECM, including Business Process Management (BPM),
    Business Rules Management (BRM), Master Data Management (MDM), Data
    Warehousing & Knowledge Management, and Enterprise 2.0. The
    summit will be held 22-26 September 2008 in Mumbai and Bangalore.
    Summit website:
    http://www.btsummit.com

    ECM is one of the fastest growing areas in the industry - Sun has not embraced this but Oracle, IBM, EMC and Microsoft are seeing huge growth and expect it to continue for years to come. Bottom line unstructured data is difficult to manage = opportunity.
    ECM specialists are very hard to come by these days, I know of many organizations who just cannot recruit high quality staff (both vendors and end users).
    Frankly if you had skills in any of the above today you would have your pick of job's and a good rate to go with it.
    Check out CMS Watch and AIIM for more information and insight into the sector.
    Best
    Alan

  • The Most Compelling Enterprise Content Management (ECM) Summit in India

    Enterprise Content Management (ECM) is no longer just about
    technology, or just about content. It is about content, community,
    and context. The deluge of data and information, coupled with the
    ever-increasing need for compliance is forcing enterprises to take
    a strategic look at ECM and its associated disciplines. To stack up
    to competition, enterprises are looking up to faster, flexible, and
    efficient business processes that can channelise copious,
    unstructured information into meaningfully optimised, governed, and
    digitally delivered data that is available to the right
    stakeholders at the right time.
    C-level executives, senior IT process management personnel,
    marketing and content managers are looking to find the precise
    solution that will fit the needs of their organization. What are
    these available solutions, and how do they stack up to the needs of
    a specific enterprise? What roles do strategic topics such as
    Governance, Collaboration, Enterprise 2.0 play in the evaluation of
    these solutions? What is a promising approach, and how do I find
    the correct partners? The ECM track at Business Technology Summit
    2008 offers strategic, technical, and business insights into all
    aspects of ECM, including Business Process Management (BPM),
    Business Rules Management (BRM), Master Data Management (MDM), Data
    Warehousing & Knowledge Management, and Enterprise 2.0. The
    summit will be held 22-26 September 2008 in Mumbai and Bangalore.
    Summit website:
    http://www.btsummit.com

    ECM is one of the fastest growing areas in the industry - Sun has not embraced this but Oracle, IBM, EMC and Microsoft are seeing huge growth and expect it to continue for years to come. Bottom line unstructured data is difficult to manage = opportunity.
    ECM specialists are very hard to come by these days, I know of many organizations who just cannot recruit high quality staff (both vendors and end users).
    Frankly if you had skills in any of the above today you would have your pick of job's and a good rate to go with it.
    Check out CMS Watch and AIIM for more information and insight into the sector.
    Best
    Alan

  • How to use hints in Obiee to increase performance

    Anybody please tell me how can we use hints to increase performance of ad hoc and dashboard reports in obiee

    Hi,
    Check this,
    http://www.howtoexam.com/index.php?option=com_content&view=article&id=75%3Ausing-hints-in-obiee-rpd-and-answers&catid=790%3Acomputers-and-software&Itemid=166
    Rgds,
    Dpka

Maybe you are looking for

  • SOAP to RFC Scenerio: HTTP 500: Internal Server Error

    Hi Experts,     I am facing HTTP 500:Internal server Error. We have SOAP to RFC Scenerio. Interface is working fine, suddenly we are facing this error in Interface. On XI server side - ABAP and JAVA stack are on same Service Pack(SP 13). There is no

  • How to Trace ABAP Webdynpro Application?

    Dear Friends, We are trying analyse performance bottle neck for ABAP Webdynro application. We have an Webdynpro Application named Z_APPLICTION_URL in NW 7.0 SP16 which is calling 4 RFC's in R/3 4.7 to fech data. Users lauch this application using URL

  • Set active cursor position

    Hi, I'm trying to set the value of a cursor in a xy graph, but the value that I write is different that the one I read, like you can see in the picture. Does anyone know why? Thanks for your help, Sílvia Attachments: cursorPosition.JPG ‏56 KB

  • Why does "There is no default app specified to open the document.."pop up

    Hello. I'm still getting used to my iBook (I only had it for like a month now) and sometimes when I try to open different applications this message keeps coming up. It gives me the option to cancel or to choose an application, but just about all the

  • Oracle Portal Report - Formatting Excel output

    We are using Oracle Portal 10.1.4.1 and we are using the Locally built providers create new report function. The report data itself is working as expected. You click the report it prompts to open the excel file and it opens. We are attempting to find