Ad Hoc Query testing when upgrading to ECC 6.0

Hi,
We have a decentralized SAP HR system. Instead of developing custom ABAP reports, we have given permission to superusers to create their own reports using Ad Hoc Query. This has lead to large number of Ad Hoc Queries  (>2000). Techincally speaking, lot of custom ABAP programs.
We are now upgrading from 4.6C to ECC 6.0.
Based on your upgrade experience please advise:
1. Does the upgrade has any affect on the Adhoc Queries. Example: they would not work, need regenerate all queries, PNP or PCH logical databases are missing, Global infosets are missing, etc
2. Do you have to test all the queries or checking just a few critical ones suffice your testing requirements.
Your insight is greatly appreciated. Points will be awarded.
Thanks
Praful

Hi,
In terms of upgradation, you need to take care of all Z programs, i don't think it will afftect your Ad hoc report, nevetheless you have used any custom fields in the report. Always you can reconsile the reports during the upgradation.
Good Luck
Om.

Similar Messages

  • Ad-hoc query's program lost in SAP 4.7 upgraded box.

    Hello,
    Does anybody know what happen to the ad-hoc query programs
    after upgrading the box of SAP 4.6c to the SAP 4.7 ?
    What happen is that I had a transaction that would exec  the program created based on an ad-hoc query and now, after the box was upgraded to 4.7 the program doesn't exist.
    Can anybody give me an answer, please?
    Regards,
    Oli

    Hi Oli,
    Depending on how AD-HOC it was created.
    - If created within DEVELOPMENT CLASS $TMP, sorry mate, but this cannot be upgraded with the system.
    - If ad-hoc created as personalized to one user, sorry mate, no automated upgrade possible.
    Other causes might be, that your query uses data objects that no longer are available on the system (likely customer developed structures).
    Hope this gives you some hints.
    Regards,
    Rob.

  • SAP Query selection screen issues after ECC upgrade

    Hi all
    We have a custom query created and assigned to a custom transaction code, which after upgrade to ECC 6.0 we find that the selection screen layout is different from what was available in 4.6C system.
    All the fields required are available.
    However, the sequence of the fields on the screen is different from the 4.6C after the upgrade.
    Can anyone help identify the issue so that the issue can be resolved?
    Thanks
    Vinodh S

    Hi N_niki
    There is no resolution as such.
    We had raised a Customer message with SAP and were informed that this was expected as the procedure to execute the reports was changed in ECC when compared to 4.6 (technical changes) and hence this issue shall remain for some queries wherein the old changes need to be brought back using an option in the SAP Query.
    Please refer to SAP Note # 723577 which could provide a better explanation for the issue.
    Hope this helps.
    Thanks
    Vinodh Sudhakaran

  • What are the things to be test in Portal Upgrading the ECC from 5.0 to 6.0

    Hi ,
    I never been as part of the ECC upgrade project. we are going to upgrade our ECC system from 5.0 to 6.0.  Also we have SAP portal in the landscape. Can any body guide me for the following points related to testing the Portal once ECC upgrade is done.
    What is the approach need to be followed.
    What are things need to be tested.
    what kind of test scripts need to be created.
    Please provide your suggestions and ideas..
    Thanks
    vijay

    Hi,
    In Upgrade you need to do all integration testing and check all functionalities.
    Thanks
    Sunny

  • BUG? ORA-01461 in Unit Tester when saving a long Dynamic Value Query

    I get an ORA-01461 "can bind a LONG value only for insert into a LONG column" error when saving a Test Implementation with a Dynamic Value Query whose length of the SQL statement is roughly 2,000 characters - I'm UNIONing ALL about 30 test case values together, but it seems to be choking on such a long SQL string for some reason....
    I am running version Early Adopter Release #2 (2.1.0.63), build MAIN-63.10.
    Thoughts?

    Confirmed.
    Bug 9119144: ORA-01461 IN UNIT TESTER WHEN SAVING A LONG DYNAMIC VALUE QUERY (OR OTHER CLOB)
    Brian Jeffries
    SQL Developer Team

  • ABAP Query - Sq03 0 infosets missing post upgrade to ECC 6.0

    Hi ,
    After upgrading from 4.6C to ECC 6.0 we found that few infosets from SQ03 & also from SQ01 is missing in the upgrade box ECC 6.0.
    Can anyone help to troubleshooting it.
    Thanks & Regards
    Senthil

    Hi,
    In Upgrade, the some queries may not be generated...
    hence you need to regenrate the queries...
    Use the FM : RSAQ_GENERATE_PROGRAM
    This FM needs input the Query name and the functional area...
    The output will be the generated program....
    To generate all queries, write a custom report using the above FM..
    Reweard if useful
    Regards
    Shiva

  • Is it necessary to include the add-on when R/3 4.7 x110 upgrade to ECC 6 ?

    Dear Expert:
    I trying to do the R/3 4.7 x110 upgrade to ECC 6
    at the PREPARE process >> extension model >> UPLOAD_REQUEST phase.
    it asked me about the add-on CDs or support package.Yes or No
    I'm wondering do i need to put any add-on CDs or components during the process of Upgrade?
    is it necessary ?
    and I only got a add-on CD 51031096_SAP_AP_7.00 Add-on installation base on SAP Basis Release 700
    is it the right one?
    don't know how to answer this steps...
    Regards
    Jack Lee

    Hi Jack,
    Yes you have to include all required Support Pack & Add-ons which are seen in Prepare Phase. Once you click Next you will get the Equivalent Level of Add -on & Support Pack.
    Regards,
    Darshan Sarwade

  • Advanced Ad-Hoc Query and formulas

    Hi experts,
    I need to track new hire HR data on a report but am struggling to do this without some excel style formulas...
    Can you use excel style formulas in Ad-hoc query?? E.g. today(). I have run some tests and don't think it is possible...
    So if the hire date is less than 2 months old (from a calendar perspecitve) then I would want the new hire to show with only their current employee data (i.e. reporting period of 'today').
    Does anyone have any ideas of how I can do it or will this require some ABAP to work properly??
    Thanks!

    Hi,
    You can use SQ01, which is actually an enhanced Ad Hoc, but without using ABAP programming.  All Ad Hoc Queries are available via SQ01, but if you make certain entries SQ01 reports are not accessible via PQAH. 
    For your request to bring in data only on new hires within a certain period, you can first create the output you want in Ad Hoc.  Also add the selection fields for Action Type (enter the type for New Hire) and Start Date of the IT0000.  Save your query.  Now access the report via SQ01 entering the User Group and scrolling down to find your report.  Execute the report (green check with clock).  This will bring up a selection screen with your entries from Ad Hoc.  Select the "Save" button.  This will bring in a screen for you to name the selection varient. Name it "STANDARD".  Below this you will see all the selection fileds available with a number of boxes.  Scroll down to the field for your Start Date and under the "Selection Variable" column select "D-Dynamic date calculation".  Then in the far right column (Name of variable) select "Current date +/- days".   Enter the number of days you want to go back - say "-30" for new hires in the past month.  Then save the variable. 
    Now when you run the report (via SQ01) you will automatically select those individuals with a start date within the past 30 days.  No programming needed.
    Paul

  • Ad-Hoc query output issue

    Hello Experts,
    Recently we have upgraded the system and we are facing issues with Ad-Hoc query output.
    Issue : After entering data in selection fields and click on "OUTPUT" button we  are getting output. now I changed the selection field  data and click on "OUTPUT" button then we are getting message "No Data selected".
    But when clicked on "HIT LIST" button for changed selection fields then we are getting HIT LIST count and after click of "OUTPUT" button we are getting output.
    So at this point this is unclear why it is working after HIT LIST? This is not consistent but appearing most of the time.
    Regards,
    Saurabh

    Thank you for reply. Yes I have checked SQ03, 02 and 01.
    It is not specific to particular query it is appears to be for all the queries.
    The important thing is to get the output we need to click first HIT LIST button and then OUTPUT. Is there any specific settings maintained for displaying output without clicking HIT LIST ?

  • Validation of EEO code using ad hoc query

    Hi,
    I just want to ask for a help or any ideas with regards to the case below.
    The EEO job categories have been revised and I've already map the existing job codes to the correct EEO job category in table T5U13. But when I try to run a query for a specific job to check and verify if the mapping of the new EEO job category to the existing job code is correct, the EEO code field is left blank. Meaning that there is no EEO job category attached to the job code. But I've maintain the mapping already and when I double check table T5U13, the job code is map to the new EEO job category. I just want to ask for help that if I run the query, the EEO code field would have an entry based on the mapping I've done.
    Thanks in advance for your help!

    Hi Sanghmitra,
    I have got a query  in AD-HOC query.
    After creating the Adhoc query using the join table functionality the resulting adhoc query does not results any out put.
    What I have done is :
    1.Created a user group through SQ03
    2.Attched user to My user group
    3.Created an infoset using join table functionality(SQ02).
    4.Saved and generated the infoset
    5.Added the user group to the infoset and than run the ADHOC query.
    The table I have used to join is all PA table (For test pupose)
    Though the purpose of the custom infoset is to join PA,OM and E rec infotypes, for testing purpose I have joined only PA infotypes.
    Result:The adhoc query does not gives any out put instead it says no data could be read.
    Could you please tell what else I need to do so that the custom infosets gives an out put.
    Will greatly appreciate your help.
    Thanks and best regards
    Rajeev

  • Employee Entry Date in ad-hoc query

    I have maintained dates in IT0041 - datetype 01, IT 0016 KONDT and also IT0000 has Hiring date with Emp Status 3 active. 
    The entry feature is also active. When i test the Function module, it brings the correct date.
    However, when i run ad hoc query the output does not bring Entry Date . The values output for all employees is 00.00.0000.  Can someone please guide how to resolve this error.
    Thanks in advance
    JG

    Hey,
    Check this Entry date not proper in adhoc query
    Hope its helpful.
    Regards,
    Manoj.

  • Modifying  the Ad-hoc Query Infoset : problem with P9105 fields.

    Hi all,
    Am having problem with Infoset of Ad-hoc Query .
    i need to add the Critical role Field Group to ZHR_PA_01 Infoset of Satandard Area.
    for this i have imported that Infotype 9105 and included the following standard fields by drag and drop.
                    1. Role Category
                    2. Role SubCategory
                    3. Global Identifier 
                    4. Personnel Number
    and then Saved and Generated the infoset succesfully.(No syntax errors)
    But
    While testing, using the T-Code:  S_PH0_48000510
    if i select one of these above fields for the report,
    Am getting the message that "Error when generating the report".
    Error Description:The report cannot be generated because the internal description is invalid or incomplete.
    means what may be the problem.?
    if i select other fields its working fine.
    can any body explain me clearly..??
    Regars,
    Kalam A.

    Hi Manoj,
      yes, i have saved the T-code.and generated the Infoset Succesfully.
    and its showing the those additional fields while testing.
    for remaining fields its working fine.
    but am not getting wats problem with the four fields of P9105 infotype.
    could you please suggest me.?
    Regards,
    Kalam A.

  • Solution Manager ChaRM Issues when Upgrading Satellite System

    When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
    Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
    1. Normal Correction (In Development)     Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
    2. Landscape is changed to                    Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
    3. Normal Correction moved to To Be Tested -> Consolidated -> Production
    Will the Normal Correction be in error because the landscape changed for the iBASE?
    Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
    Thank You,
    Carlen
    Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
    Edited by: Carlen Yuen on Jan 13, 2009 1:51 AM

    Thanks Subhashini!
    We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
    Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
    Thanks again!
    Carlen

  • SE07 doesn't show Import status after upgrade to ECC 6.0

    Hi,
    we were on 4.7 and we recently upgraded to ECC 6.0 EHP4. When we were on 4.7, after a release, we used to monitor the import status of all the transports going in, using transaction SE07. Looks like this transaction wouldn't work anymore in ECC6.
    I can access the transaction, but I cannot expand the "Execution" to see the status of the transports which went in today. 4.7 used to show all the transports which were impoerted on that day.
    I know we can check the import logs by pulling up each transport, but SE07 will show you a consolidated list with all the detail and will be very easy to find what we are looking for.
    We are on Oracle 11g on Solaris 10. Please help.
    Regards,
    Vijay

    Hi Tony,
    I donot think it is an authorization problem. I have tried with a test user with full permissions and also with DDIC user, but still the same.
    Regards,
    Vijay

  • Query from 4.6c to ecc 6

    HI
    We are upgrading query from 4.6c to ecc 6. We are using Export/Import. When  I am exporting query via RSAQR3TR. I am getting error
    F Transport dataset  AD1D910286 does not exist.
    Pls help with solution.
    Regards
    Ajith

    Hi,
    you can try to read OSS note 352617 .
    Ivan

Maybe you are looking for