Adapter for Avaya communication manager

Hi Everyone,
Can anyone help me with the connector for Avaya communication manager?
I am confused which jar to use for Avaya communication manager and how to create the configuration file(XML) file for that,i mean fields that are required in XML file?
I have worked on the configuration of Sun java directory server with OIM.
Thanks in advance.
Satbir.

Did you add Avaya Session Manager as a PSTN gateway in Lync Topology?
Did you create dial plan and related normalization rule for extension in Avaya telephone system.
Which guide did you use to integrate Avaya Aura Session Manager with Lync Server?
You can check the following deployment guide:
http://www.microsoft.com/en-hk/download/details.aspx?id=41152
Lisa Zheng
TechNet Community Support

Similar Messages

Lync 2013 integration with Avaya Communication Manager Version 5.2 and Avaya Session Manager 6.3

Hi Team,
I have a situation, We have done integration between Avaya Communication Manager Version 5.2, Avaya Session Manager 6.3 and Lync 2013.
I’m able to make lync to lync call via extension number but not lync to avaya extension vice versa and lync to mobile calls. Will appreciate your help.
A PBX gateway has been marked as less-preferred.
Gateway name: sm.contoso.com
Response Code: 400
Consecutive Failure occurrences: 29
Cause: The gateway responded with the same failure response multiple consecutive times and is being marked as less-preferred.
Resolution:
Verify that the gateway is functioning correctly.

Did you add Avaya Session Manager as a PSTN gateway in Lync Topology?
Did you create dial plan and related normalization rule for extension in Avaya telephone system.
Which guide did you use to integrate Avaya Aura Session Manager with Lync Server?
You can check the following deployment guide:
http://www.microsoft.com/en-hk/download/details.aspx?id=41152
Lisa Zheng
TechNet Community Support

Workflow for Bank Communication Management

Hi ,
I need to find out any SAP workflows are responsible for the below activities in Bank communication management .
spro-Financial Supply Chain Management- > Bank Communication Management -> Release Strategy -> Change and Release ->
Assign Role to Release Steps , Here i am assigning rule - 96000144 against Rel Obj BNK_INI .
In pfac for rule 96000144 , i am assigning responsibilities where i am maintaining Agents ( User IDs ) .
The rule IDs specific to amount limits are maintained in SPRO under Financial Supply Chain Management- > Bank Communication Management -> Payment Grouping
When in t code bnk_moni , for Bat No , the approver list has to be displayed .
If anyone has any idea on Workflow related to Bank Communication Management , suggestion will be highly appreciated .
Regards
Prabhudutta

Please check OSS 1041016, it contains documentation on BCM WF setup.
Rememeber that release WF is needed only if you have more than one release step - first release step is always done via BNK_APP, at the moment it's hardcoded in BCM (if you have all the latest patches).
WBR -
Pauls

Informatica PowerCenter Adapter for SAP Solution Manager

Hi
I would know if exist an adapter to connect SAP Solution Manager and Informatica PowerCenter.
Is it possible use Business Process Monitoring scenario with Informatica PowerCenter?
thanks
giovanni

Hi giovanni serreli
I think this product isn't supported yet. I checked the latest version of System Landscape Guide from here => http://service.sap.com/diagnostics => Media Library... => SAP Solution Manager Landscape Setup Guide.

Business communication Management

Dear Basisfriends,
I need some help from you, can i have step by step guide or some document for Business communication management installation. I downloaded installation guide from Service Market place.
But it looks complex, Kindly assist.
Regards,
Vivek

Hello
I am US-based SAP CRM consultant. Could you give some information whether SAP US offer similar course? I search SAP training catalog and was not able to find any classes being offered in United States
Thanks in Advance
Min

Records Management - Adapter for UCM

Hi there,
I am having troubles understanding how the Records Management Adapter for UCM works:
1. I have installed URM on a separate instance and have defined retention categories there.
2. I installed the Adapter on a UCM instance and pointed it to the URM instance.
3. It copied the categories over BUT
4. Only those categories that allow for non-record items show up in the LifeCycle field as the view of the field does filter out all other categories.
So I have not figured out how I can make a content item a record. It that possible at all. Or does this set up of
- one URM instance and
- a second UCM + Adapter instance
only support lifecycle management?

Hi There;
I am having troubles with the Records Management Adapter for UCM too. Also i am having troubles to defined retention categories and configure the retention schedules too. The documentation is not helping in anything about this troubles. Does anyone knows some better documentations about that?? Thanks a lot!!

Create/Merge batch for HR payroll BCM (Bank Communication Management)

Hi All,
This with reference to BCM (Bank Communication Management) EHP4
How to create/Merge batch for HR payroll in BCM?
Thanks in advance for your support
Regards,
MS

Hi MS,
First go to t-code 'OBPM5 -'Reservation for cross payment run Payment media' and reserve a Prefix for HR payment runs.
Then in IMG maintain a rule for HR payment runs:
In IMG go to Financial Supply Chain Management > Bank Communication Management > Payment
Grouping > Rule Maintenance
Here if you want to select all HR payments into one merged payment run just select 'Merge ID' as the selection criteria. You can also include multiple rules to merge them separately. For example if you want to put all HR payments below USD10000.00 into one payment run and all others into another payment run then you can create two rules or one rule with two selection critera.
It is very flexible. If you want I can send a SAP's cofig guide.
Kalyan

SAP Solution Manager Adapter for SAP Quality Center by HP (ST-QCA)

Hello Folks,
I am configuring Solution Manager, and the current activity asks to download to add-ons that I can't find in the Marketplace - they are required to activate Solution Manager Enhancements:
SAP Solution Manager Adapter for SAP Quality Center by HP (software component: ST-QCA)
SAP Support Enablement package (software component: ST-SEP)
Does anyone know where to get those components?
Thanks a lot,
Marco

Hi Ravindra babu/ Murali:
I have one very quick doubt and would be really glad if you can help clarify.
As per documentation from SAP and also IMG screens etc. it seems like 'a project' in SolMan will hand-shake with 'a project' in QC.
Can I therefore assume that if there is only one instance of SolMan (productive) and one QC server alone (again, productive), any number of trials I carry out between SolMan project and QC project will not spill over into other projects in these two systems and thus have no impact whatsoever at server level.
The reason for my asking this - in my project, Testing has started using QC in a standalone mode already. We have just one server. If I have to carry out any tests/ demo between SolMan and QC, it shouldn't impact other 'standalone' projects being done in QC.
Regards,
Srini

Sizing for SAP BCM (Business Communication Management)

Hi All
We have to provide a server sizing to be used for SAP BCM (Business Communication Management) module which will be intergrated with SAP CRM and is to be used for call support. As far as we have reached, we require a Windows server and will host MS SQL database with an approx consumer data of 63 lacs consumers.
Please specify the sizing for this server
Thanks in advance
Lokesh

Sorry, forgot to ask how much physical memory you have on each host.
Let's split it to 2 topics.
1. For ECC, since OracleDB and non-unicode page which are the 2 major factors won't be changed, so I would think here we could just do a math, as long as host A has enough memory which is allocated for Oracle and ECC (extended memory) on host B to be added up.
2. For EP, memory tuning size is basically the same for HP JDK and SUN JDK, that each server node is allocated approximately 2.5GB RAM. Besides, 0.8-1GB RAM needs to be left for OS kernel. But in your case, host B is currently holding 200 users which is a big jump for host A(note: only active user quantity matters here).
That's fine if main physical memory is a little short for host A, utilizing multiple less powerful servers as 2nd tier application server to do the load balancing is also a solution with lower TCO.
Regards,
Effan

Solution Manager Adapter for QC

Hi fellow members,
My query is regarding Solman adapter for QC. I could not locate how to acquire it? I could not get any link on service.sap.com.
If anyone has information regarding how to get this adapter, please do share with me.
Thanks & Best Regards,
Tauseef

Hi Tauseef,
Following are the steps that I have gathered, based on various files available on this subject in service.sap.com
(1) Buy the Adapter software from SAP
(2) Download Set Up documents provided by SAP:
(a) [Configuration Guide SAP adapter for SAP Quality Center by HP|https://websmp205.sap-ag.de/~sapdownload/011000358700000612662007E/Adapter_Configuration_.pdf]
(b) Master Guide SAP adapter for SAP Quality Center by HP|https://websmp205.sap-ag.de/~sapdownload/011000358700000612672007E/Adapter_Master_Guide.pdf]
(3) Identify & Download SAP Notes relevant for this; a few I could come across are:
Note 1109650 - SAP Solution Manager 4.0 Extension Add-Ons
Note 1059350 - Installing SAP Adapter for SAP Quality Center by HP
Note 903274 - Changes to Solution Manager IMG 7.0 after SP01
Note 834534 - SAP Solution Manager roles in Release 7.0
(4) Confirm if the QC version you have and the SAP SolMan version are compatible
SAP Solution Manager 4.0 Service Pack 12 with note ID 1065377 or later
HP Quality Center 9.2 Patch 7 or later
if the Patch is any less in QC, it's available on installation CD anywa that comes along with Adapter, I learn. So, no worries.
(5) Download HP Enterprise Integration module 2.0 Patch 1 for SAP applications by following [this |http://update.external.hp.com/qualitycenter/qc90/sap/enterprise_integration/index.html]link
(6) Obtain your existing QC license from HP, to activate its usage for this Adapter functionality too. For this, send existing SAP Quality Center by HP license file and ask for the addition HP Enterprise Integration for SAP. The license file will then be returned to you with the flag turned on. You can achieve this by following [this|https://webware.hp.com/welcome.asp] link
If your existing QC license was bought not from HP directly but via SAP, you can contact your Account Manager in SAP and enquire how to get this done. I am not sure myself.
...to be continued.
Regards,
Srini

Solution manager adapter for HP Quality Center

Hi All,
We want to use Solution manager adapter for HP Quality center. Can you please provide some documentation/information regarding it's installation prerequisite, installation process and Licences.
Regards
Vivek

>
vivek b wrote:
> We want to use Solution manager adapter for HP Quality center. Can you please provide some documentation/information regarding it's installation prerequisite, installation process and Licences.
As a first overview:
[SAP Solution Manager Adapter for SAP Quality Center by HP |http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000725149&_SCENARIO=01100035870000000202&]
Best regards,
Ruediger

Solution Manager Adapter for HP QC (12)

Hi,
As you know, HP has recently launched the version 12 of HP QC.
We plan to use Solution Manager (7.1) in combination with HP QC (12).
The only version of Solution Manager Adapter for HP QC I can find on SAP Market place is ST-QCA 100.
Do you know if there is a newer version of Solution Manager Adapter for HP QC (12) or is it independent of QC version?
Thanks for your help.
Regards.

Hi Priya,
It is independent of QC Version. I recently integrated ALM 11.52 with Solution Manager SP10 using ST QCA 100 and it worked ust fine. Just make sure with SAP that they support the ALM 12 officially, there might be some changes in ALM 12 which *might* give some problems. SAP as of now did not list ALM 12 in their compatibility matrix;
I hope they are using the same Enterprise Integration adapter in ALM 12 that they used in 11.52. If so it should work. Give it a try !
Regards,
Vivek

Change Community Manager for Socialcast

I am listed as the contact (i.e., Community Manager) for our Socialcast site, but when I login, I don't have the option in the gear drop-down for admin settings. Is there a way to correct this?
My current email address is not in the same domain as the community so my default community is not the same as the one for which I am listed as the Community Manager.
I appear to belong to the community since it shows up in the same gear drop-down, but when I click on it to switch to that community, it asks me to login again. When I do, I get a message telling me my creds are not recognized.

We are responding to you via email. Stay tuned!

How to debug a Diagnostic Data Adapter (custom data collector) for Microsoft Test Manager

Hello,
I have created a custom Diagnostic Data Adapter aka. custom data collector for Microsoft Test Manager (MTM) and installed it, all according to the guidelines under Creating
a Diagnostic Data Adapter to Collect Custom Data or Affect a Test Machine.
I would like to debug my data collector. On which machine should I perform the debugging and to which process should I attach from Visual Studio? Are there any restrictions regarding the user who is running the debug session?
How can I do that?
Thank you ,
Ana

It seems that I found the solution, but I would like someone still to verify if it is the right one.
Steps:
Turn on "Microsoft Symbol Server" under In Tools-->Options-->Debugging
Restart manually "Visual Studio Lab Agent Service" on the machine where the collector is installed (this actionautomatically restarts the Visual Studio Test Agent ("C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\QTAgentService.exe"))
Load code for your collector in Visual Studio
Attach the Visual Studio debugger to the processes QTAgentService.exe and QTDCAgent32.exe
Start test in MTM on client machine using test setting which trigger the data collector (diagnostic data adapter)
and finally hit a brake point in your code...
Thank you,
Ana

Redundancy for Cisco Unified Communications Manager Business Edition 8.0.

Hi,
Is there redundancy for Cisco Unified Communications Manager Business Edition 8.0.
Can I deploy more than one server at a site for redundancy?
Thanks
Mudassir

No. UCM-BE is a single-server solution. You can use CME in SRST mode for survivability if the server is offline.

Adapter for Avaya communication manager

Similar Messages

Maybe you are looking for