Adapter light stays on even after removing from MacBook Pro
Hi,
I have a MacBook Pro. I noticed something odd last night. When I remove the adapter from the MacBook Pro (you know, the magnetic end that attaches to the MacBook Pro), the light on the adapter still stays green/on. I actually have to unplug the adapter from the wall outlet to make the light turn off. This never happened before.
Has anyone seen this before? Any advice?
Thanks.
I think that the light is controlled by the middle pin in the connector. Check it very carefully with a magnifying glass to see if any of the pins are bent or if there is any metalic dust in there.
Similar Messages
-
Application which was removed from MacBook Pro Dock will not open. Why?
I dragged the Photoshop Elements (PSE) 11 Editor icon from the Dock on my MacBook Pro (Mavericks) because I had recently installed PSE 13. I still wanted to keep the version 11 Editor but not in the Dock. It dissolved in a puff of smoke as expected. When I went to Launchpad and the Applications folder in the Dock, PSE 11 Editor would not open. There was a question mark over PSE 11 Editor icon in Launchpad. The error message was that there were parts missing and I should reinstall it. When I go to Finder > Applications and click on PSE 11, where the icon used to be is a blank icon. It is named "Alias." When I click on the icon, the error message is "The operation can't be completed because the original item for "Adobe Photoshop Element 11" can't be found." I then when back to Launchpad and opened the PSE 11 Organizer icon. After it opened it, I opened the PSE 11 Editor from the Organizer. The Editor was fine and was functional. I then saved it to the Dock. I went back to Finder and the PSE 11 Editor is still not available. What the heck is going on??? I would like to be able to remove Apps from the Dock and still be able to open them from Launchpad or the Applications Folder. HELP!
Thanks, Bob"The PSE 11 Editor I restored to the Dock from PSE 11 Organizer today works also."
Yes, sometimes that's all it takes. It's usually a matter of finding the original application nor the alias.
I'm still suspicious of Adobe since they seem to be going the way of Microsoft. If you muck about w/ the folders the application often stops working:
"___ __ cannot open because elements are missing from the application folder". -
Mac App Store removed from MacBook Pro. How to download it
Mac App Store has been removed from my MacBook Pro. How do I get it back?
Click here and use Pacifist to install it manually.
(116457) -
Air is dead after migrating from Macbook Pro Maverick via time machine
I backed up my Macbook Pro on Time Machine. I then used setup assistant on new Macbook Air. Everything went great with transfer, but upon restart, I get slight light on screen, but no apple, icon, and resetting of any form does not work. No sound. Help!
That's annoying. What resets have you attempted?
Did you do everything in this Apple Support document?
Troubleshooting: My computer won't turn on - Apple Support -
My iPad indicates that it is disabled. When I try to backup from my PC, it tells me to disable FindMyPhone. I removed the device from FindMyPhone (couldn't see how to turn it off in iCloud) but, when I return to iTunes, it continues to tell me to turnoff FindMyPhone. I've verified the iPad isn't showing on FindMyPhone anymore. What do I do to get into my iPad? Please help!
Hi, leahbrbus.
Thank you for visiting Apple Support Communities.
Here are the steps that I would recommend going through when experiencing this issue.
iOS: Forgot passcode or device disabled
http://support.apple.com/kb/ht1212
Cheers,
Jason H. -
apple ID does not allow me to change primary listed email address, this address does no longer exist and now need to get a secendary listed email address to become primery.
I had a similar problem, which prevented me changing my personal data on iCloud/apple etc. I found the answer on the apple web-site, "appleid.apple.com".
This site lets you change your primary country, and so lets you use the app store. -
N8 charging light stays on, even with leads remove...
If I connect my N8 to my PC with the USB cable, the charging light stays on even after the cable has been removed. See this pic: http://img815.imageshack.us/i/imgp2508k.jpg/
I have to reboot the phone to get the light to turn off.I think that the light is controlled by the middle pin in the connector. Check it very carefully with a magnifying glass to see if any of the pins are bent or if there is any metalic dust in there.
-
I have a ListView displaying a collection of icons. The user can then select different icons (checkboxes) to do things like Copy or Delete.
Problem is, when I try to delete the actual file from the disk, I get an error telling me the file is "in use" ("vshost.exe", the VS runtime during testing).
I thought maybe it was because it still appeared in the window and was still in the ImageList, but even after removing it from both locations, I still get the error. My code:
Dim intCnt As Integer = 0
Do
ImageList2.Images.RemoveAt(intIconsChecked(intCnt)) ' Remove from collection.
lsvCollection.Items.RemoveAt(intIconsChecked(intCnt)) ' Remove from ListView window.
FileIO.FileSystem.DeleteFile(strIconPath & "\Icon" & Format(intCnt + 1, "00") & ".rsc") ' "+1" b/c Icons start with "01".
FileIO.FileSystem.DeleteFile(strIconPath & "\Icon" & Format(intCnt + 1, "00") & ".png") ' "In use" Error here.
".rsc" deletes just fine, so I know I'm deleting the correct file. Why does VS still think the file is still "in use"?
ThxMugsy,
Consider this as food for thought, even if you don't use it.
If you set it up right then you can control how it works. A reference is a reference and any left behind will cause you grief down the road when you try to delete things.
As an example, a simple class follows. It does *not* implement IDispose, although it does have a private shared Dispose method in it:
Public Class MyImages
Private _bmp As Bitmap
Private _name As String
Private _sourceFilePath As String
Private Sub New(ByVal bmp As Bitmap, _
ByVal name As String, _
ByVal filePath As String)
_bmp = bmp
_sourceFilePath = filePath.Trim
_name = name.Trim
End Sub
Public ReadOnly Property Bmp As Bitmap
Get
Return _bmp
End Get
End Property
Public ReadOnly Property Name As String
Get
Return _name
End Get
End Property
Public ReadOnly Property SourceFilePath As String
Get
Return _sourceFilePath
End Get
End Property
Public Shared Sub AddNew(ByRef miList As List(Of MyImages), _
ByVal imageFilePath As String)
Try
If miList Is Nothing Then
Throw New ArgumentNullException("The collection of MyImages cannot be null.")
ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
Throw New ArgumentException("The file path of the image cannot be null or empty.")
ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
Throw New IO.FileNotFoundException("The file path of the image could not be located.")
Else
' Should do validation here that the file
' is actually an image but I'll not do this
' here...
Dim thisBMP As Bitmap = New Bitmap(imageFilePath)
miList.Add(New MyImages(thisBMP, GetFileNameWithoutExtension(imageFilePath), imageFilePath))
End If
Catch ex As Exception
Throw
End Try
End Sub
Public Shared Sub AddNew(ByRef miList As List(Of MyImages), _
ByVal imageFilePath As String, _
ByVal imageName As String)
Try
If miList Is Nothing Then
Throw New ArgumentNullException("The collection of MyImages cannot be null.")
ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
Throw New ArgumentException("The file path of the image cannot be null or empty.")
ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
Throw New IO.FileNotFoundException("The file path of the image could not be located.")
ElseIf String.IsNullOrEmpty(imageName) OrElse imageName.Trim = "" Then
Throw New ArgumentException("The name of this image cannot be null or empty.")
Else
' Should do validation here that the file
' is actually an image but I'll not do this
' here...
Dim thisBMP As Bitmap = New Bitmap(imageFilePath)
miList.Add(New MyImages(thisBMP, imageName, imageFilePath))
End If
Catch ex As Exception
Throw
End Try
End Sub
Public Shared Sub Remove(ByRef miList As List(Of MyImages), _
ByVal imageFilePath As String, _
Optional ByVal removeFilePathAlso As Boolean = False)
Try
If miList Is Nothing Then
Throw New ArgumentNullException("The collection of MyImages cannot be null.")
ElseIf String.IsNullOrEmpty(imageFilePath) OrElse imageFilePath.Trim = "" Then
Throw New ArgumentException("The file path of the image cannot be null or empty.")
ElseIf Not My.Computer.FileSystem.FileExists(imageFilePath) Then
Throw New IO.FileNotFoundException("The file path of the image could not be located.")
Else
Dim findInstance As System.Collections.Generic.IEnumerable(Of MyImages) = _
From mi As MyImages In miList _
Where mi.SourceFilePath = imageFilePath
If findInstance.Count <> 1 Then
Throw New ArgumentException("The instance of MyImages specified by the" & vbCrLf & _
"image file path is not in the collection.")
Else
Dispose(findInstance.First)
If removeFilePathAlso Then
My.Computer.FileSystem.DeleteFile(findInstance.First.SourceFilePath)
End If
miList.Remove(findInstance.First)
End If
End If
Catch ex As Exception
Throw
End Try
End Sub
Private Shared Sub Dispose(ByVal instance As MyImages)
If instance IsNot Nothing AndAlso instance._bmp IsNot Nothing Then
instance._bmp.Dispose()
instance._bmp = Nothing
End If
End Sub
End Class
When you look through that, look specifically at the "Remove" method and in particular, look at the order in which things are done. That's the critical part in this.
I tested it with a simple form:
Two buttons, a checkbox, and a picturebox. I also copied a small folder full of image files to my desktop since I'll be deleting a file from it. Following is the code for Form1:
Option Strict On
Option Explicit On
Option Infer Off
Imports System.IO.Path
Public Class Form1
Private miList As New List(Of MyImages)
Private Sub Form1_Load(ByVal sender As System.Object, _
ByVal e As System.EventArgs) _
Handles MyBase.Load
Dim desktop As String = _
My.Computer.FileSystem.SpecialDirectories.Desktop
Dim imgFolder As String = _
Combine(desktop, "Images")
PictureBox1.BorderStyle = BorderStyle.FixedSingle
For Each imgFilePath As String In My.Computer.FileSystem.GetFiles(imgFolder)
MyImages.AddNew(miList, imgFilePath)
Next
btn_RemoveFirstImage.Enabled = False
CheckBox_RemoveSourcePath.Enabled = False
End Sub
Private Sub btn_ShowFirstImage_Click(sender As System.Object, _
e As System.EventArgs) _
Handles btn_ShowFirstImage.Click
Try
If miList.Count >= 1 Then
With PictureBox1
.SizeMode = PictureBoxSizeMode.Zoom
.Image = miList(0).Bmp
End With
btn_RemoveFirstImage.Enabled = True
CheckBox_RemoveSourcePath.Enabled = True
End If
Catch ex As Exception
MessageBox.Show(String.Format("An exception was thrown:{0}{0}{1}", vbCrLf, ex.Message), _
"Exception", MessageBoxButtons.OK, MessageBoxIcon.Warning)
End Try
End Sub
Private Sub btn_RemoveFirstImage_Click(sender As System.Object, _
e As System.EventArgs) _
Handles btn_RemoveFirstImage.Click
Try
If miList.Count >= 1 Then
MyImages.Remove(miList, miList(0).SourceFilePath, CheckBox_RemoveSourcePath.Checked)
End If
PictureBox1.Image = Nothing
btn_RemoveFirstImage.Enabled = True
CheckBox_RemoveSourcePath.Enabled = True
Catch ex As Exception
MessageBox.Show(String.Format("An exception was thrown:{0}{0}{1}", vbCrLf, ex.Message), _
"Exception", MessageBoxButtons.OK, MessageBoxIcon.Warning)
End Try
End Sub
End Class
Running it is straightforward:
Now when I click to show the first one:
A different image is shown because that first one no longer exists - either in the collection or in the folder.
Closing/disposing all references is the key and the order matters.
Something to consider the next time around. :)
Still lost in code, just at a little higher level. -
Adapter light stays on all the time...
My battery stopped charging on my MacBook a couple of weeks ago and since then it's had it's DC Inboard replaced, logic board replaced and battery replaced.
When I first got home with it last night the adapter was not working - just showed that it was plugged in but not charging - dh has a MBP and my adapter didn't work with his either and his power cord worked fine on my computer.
Today - tried my adapter again and it worked - but light stayed green even when it was charging - unplugged from my computer and the light stayed on, unplugged from the wall and the light still stayed on for a bit. Plugged it in again, didn't work at all. Plugged it in again with three prong into wall and it worked - is charging with amber light on right now however, when I unplug it from my computer the amber light just stays on. Also - my battery is 100% and the amber light did not change to green, said that it was still charging?
Am I making any sense at all? Do I need to get a new adapter or what the heck is going on now???
Thanks for any help you can offer.The problem was the adapter itself - got it replaced and have had no problems!
-
Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?
You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.
-
CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it. I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps). So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens. What next?
Try...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html -
I cannot log in my account but can as a guest even after removing the password
i cannot log in my account but can as a guest even after removing the password
Hi Kabiru,
Thanks for visiting Apple Support Communities.
You may want to use the steps in this article to reset your user account password:
OS X: Changing or resetting an account password
http://support.apple.com/kb/HT1274
Best,
Jeremy -
Presentation catalog are listing on subject area even after removal
Presentation catalog are listing on subject area even after removal of catalog on RPD.
I have restarted oc4J server tooPlease make sure that you have saved the repository or not.
And then restart both the services i.e Presentation server & OBI Server
Regards
Visweswar
Edited by: Mopur on May 26, 2011 10:44 PM -
Have CS5 on current PC, Win 7 64bit; how get *.exe to transfer to new computer after remove from old one?
Baffled by multiple links; found one I think(?) I need. CS5 12.1.
It's basic, so I assume that one goes with CS5 Design Standard, but do not
know. Thanks for answer(s) again.
On Tue, Feb 17, 2015 at 10:36 AM, BobLevine <[email protected]> -
I tried to remove Trovi from macbook pro but it doesnt go away
I tried to remove Trovi from macbook pro but it does not go away. Trovi opens right away
How to remove Trovi adware from Mac - MacSecurity
Helpful Links Regarding Malware Problems
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari.
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.
Maybe you are looking for
-
HTTP server code 404 reason Not Found explanation Not Found
Hi all I am facing this error "HTTP server code 404 reason Not Found explanation Not Found" during a asynchronous xml message sent to a buisiness service <?xml version="1.0" encoding="UTF-8" standalone="yes" ?> - <!-- Call Adapter --> - <SAP:Err
-
Traversing from one screen to the previous one using back button
Hi all, I am new to the forum and want the help of the experts over ther for this doubt i encountered. I want to know how we can traverse from one screen to the previous one using the back button. Like if presently i am in 4th screen if i wa
-
Adobe Interactive forms with Graph and Japanese text
Hi Experts, I want to use graph/bar/pie chart with Adobe Interactive forms and along with that the UI element's(Button,lable,table header,column) text has to be in Japanese language. Is it possible using Adobe interactive form ? Thanks in advance.
-
Ipad calendar does search forward more than 5 months when letter are inserted in the search box
Ipad calendar I play in a band enter gigs onto the calendar, the word "gig" is used every entry. i.e gig Bristol, gig London, .gig Birmingham etc. When use the search box & type in "gig" I would expect them all to appear. But they cease after about
-
Mobile Me aliases not showing in Mail app.
Just recently, I have lost the ability to use my mobile me aliases when using the mail app on my macbook. They have just disappeared from the drop down menu under from in mail. I have used support with mobile me - they seem to indicate it's a problem