Adapter status determination by program

Dear all,
Is there any possibility to determine an adapter status by a program?
I mean, if there is any API, or BAPI, or RFC, or tables, whatever, to read into an ABAP program the adapter status - specifically the informations which are displayed on the corresponding Runtime Workbench page (active/inactive/stopped, perhaps the status of last processed messages).
The ABAP cache holds all the adapters (definitions), but no dynamic status, so it's useless. The message table does not contain any information about the adapter, so it's useless too.
The ideal would be to retrieve such data into an ABAP program, but any other help would also be useful.

Hi
These table contains XI information, might help u
Interesting ABAP tables in XI Part I

Similar Messages

Is ther a way to speed up a Mac? Mine has gotten slower and slower over time. When memory comes close to full would that have an effect on performance? Is there a way to determine unused programs/software to remove and free space?

Is there a way to speed up a Mac (similar to de-fragging on a PC)? Mine has gotten slower and slower over time.
When memory/disc comes close to full would that have an effect on performance? How should I determine what programs/software to remove and free space?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to:     OS X Maintenance - MacAttorney;
                                  The X Lab: The X-FAQs;
                                  The Safe Mac » Mac Performance Guide;
                                  The Safe Mac » The myth of the dirty Mac;
                                  Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Helpful Links Regarding Malware Protection
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
          Mac OS X Snow Leopard and malware detection
          OS X Lion- Protect your Mac from malware
          OS X Mountain Lion- Protect your Mac from malware
          About file quarantine in OS X
If you require anti-virus protection I recommend using VirusBarrier Express 1.1.6 or Dr.Web Light both from the App Store. They're both free, and since they're from the App Store, they won't destabilize the system. (Thank you to Thomas Reed for these recommendations.)
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
    used to manage backups and to restore backups. Time Machine
    requires a backup drive that is at least twice the capacity of the
    drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

How can I determine which programs/files are using disc space?

A question for the professionals:
What program on my MacBook Pro can I run to determine which programs and files are taking up the percentage of disc space? I am running at 72 gb, which is great, but I need to know what is using up the rest of it. Thank you in advance to any helpful solutions.
Matthew

activity monitor for RAM (its already in your utilities folder) http://support.apple.com/kb/HT1342. OmniDiscSweeper for hard drive http://www.omnigroup.com/products/omnidisksweeper/ (needs to be downloaded)

How do you determine which programs or processes run following a reboot?

How do you determine which programs or processes run following a reboot? Also when you reboot Mac tries to reopen anything running before the reboot. Is there any way to turn off that functionality?

10.7 Lion
dadpope wrote:
How do you determine which programs or processes run following a reboot?
Login items
Follow the instructions in this article.
http://support.apple.com/kb/PH4333
Also when you reboot Mac tries to reopen anything running before the reboot. Is there any way to turn off that functionality?
System Preferences > General
Section: Number of recent items
Uncheck the box for "Restore windows when quitting and re-opening apps".

Dynamic File Adapter status - Active or Inactive

Hi Experts
Is there any way to set the Sender/ Receiver File adapter status dynamically to inactive or active.
Is there any setting exists in the file adapters ? Please provide me possible solutions.
Thanks
Faheem

Hi all,
Many thnz for the response.
There is one more way of doing this as well. Just now i found that.
In the runtime workbench - Communication channel monitoring , Select the automatic control for the comminucation channel to make active or inactive .
there are options for our comm channel to run specfic date and time.
Thnz
Faheem

Deleting old messages problem (adapter status 001)

Hi,
I am trying to delete old messages, and some of them are staying in system. Here is the result of 'RSXMB_SHOW_STATUS' report:
Message Status
Message Status:      003 Number:             85.274
Adapter Status of Messages with Message Status:              003
Adapter Status:      000 Number:              4.040
Adapter Status:      001 Number:             74.290
Adapter Status:      002 Number:                  0
Adapter Status:      003 Number:                  0
Adapter Status:      004 Number:                  0
Adapter Status:      005 Number:                  0
Adapter Status:      006 Number:              4.806
Adapter Status:      007 Number:              2.122
Adapter Status:      008 Number:                  6
Adapter Status:      009 Number:                  0
Adapter Status:      010 Number:                  0
Adapter Status >     010 Number:                  0
So, there is 74.290 messages whith 001 status in adapter. Archieve and delete jobs don't want to delete them, and status isn't going to change. Refreshing adapter status did help with most of messages but 74.290 is what still there after refresh. Any ideas how to bring them to final state or may be its possible delete them in this state?

Hi,
    Above Messages are related to your IDoc and BPM related interfaces...
so you need to schedule a report which does the deletion of the same...
Check the reports scheduled are running or not...
I dont remeber the reports which does the job of changing the status...
HTH
Rajesh

How do I restore my Admin status for a program in Applications using 10.6.8

How do I restore my Admin status for a program in Applications using 10.6.8?

Is this the file that does not have the desired priveleges? I think that's correct. If so, then open Terminal in the Utilitie folder. At the prompt enter:
sudo chown -Rf root:admin [dragged file goes here]
Leave a space after "root:admin" and drag the file you need to change into the Terminal window. Press RETURN. You will be asked to enter your admin password. It will not be echoed to the screen so type carefully. Press RETURN again.
This will change the priveleges of the file to the default for the Applications folder.

What is the use of GUI status in Dialog programming

what is the use of GUI status in Dialog programming,, how can it be used there,, as screen are alredy defined..

Hi,
The use of GUI Status is that when we have to change some thing in Menu Bar, Toolbar and Function Keys. Say For Example we have to create any Custom Button in the application toolbar etc.
It can be used in Dialog Programming via defining the Status in the PBO module of the screen.
eq. created a screen 9000
          on clicking it->
                               PROCESS BEFORE OUTPUT.
                                         MODULE status_9000.
On double clicking on this "Module status_9000" - you can write "SET PF-STATUS 'STATUS_9000'".
Now u can create GUI staus with name "'STATUS_9000'".
Let me know in case you have any further doubts.
Thanks

ADAPTER STATUS

where to check the adapter status..whetther it is active or inactive....

Hi Chandra,
In ID---open Communication channel
In the Advanced TAB-----check the Status
And also we can check the CC Active or in RWB
RWB---Compo miniAdapter Engine-CC moni---Select the CC.
There we can see the status of the CC whether it is started or Stopped.If it stopped means we can start it by pressing the start
Regards
Seshagiri
Edited by: N V Seshagiri on Apr 17, 2008 8:32 AM

How to determine main program name?

Hello Forums,
I am working on a customer exit that is called by a function module and I would like to have a condition in my include that states
if program_name =   SAPLV56K .
do logic in here.
Endif.
is it possible to determine the program name?
thanks

Hi,
Do following step,
1 declare global Variable of type sy-repid. eg data g_repid like sy-repid.
2 assign program name to variable at Initialization stmt.
     INITIALIZATION
     g_repid = sy-repid.
3 Use this variable.
other wise use sy-cprog.
Difference between sy-repid and sy-cprog
Sy-repid --- It contains the name of current program.
Sy-cprog---Contains the name of calling program.
Thanks & Regards,
ShreeMohan

GUI status of std. program

Hi,
   Can somebody tell me how to get the GUI statuses i.e. All the Function Codes used mentoined in a GUI status of standard program.
I have checked the program SAPMSEUK & Function Module RS_CUA_INTERNAL_FETCH. But its not giving the GUI_STATUS till the bottom Function Codes level.
Please suggest some solution...
Regards,
Rushikesh

Hi,
if you don't want them programatically, call the transaction in question and click on system->status. Double click on the field gui status. This will lead you to the definition of all function codes (ok codes) of the screen.
If you want programatically, try using the function module.....
data: irsmpe_funl type table of rsmpe_funl with header line.
call function 'RS_CUA_GET_FUNCTIONS'
exporting
LANGUAGE                = ' '
    program                 = <program_name>
IMPORTING
MASTER_LANGUAGE         =
tables
    function_list           = irsmpe_funl
EXCEPTIONS
MENU_NOT_FOUND          = 1
PROGRAM_NOT_FOUND       = 2
OTHERS                  = 3
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
regrads
navjot
reward if helpfull

Status ARCHIVE_CONTENT in program SAPLOCS_UI is missing

Hi, SAP expert,
     I just install minisap 4.6D recently. I try to play around to upgrade the support package via transaction code SPAM.
     When I upload the support package (e.g.: SAPKA46D01.CAR) from the frontend (local PC), it shown a dialog screen for this package info. But at bottom (main screen) it prompt a message 'Status ARCHIVE_CONTENT in program SAPLOCS_UI is missing'.
     May I know, is it a miniSAP bug or there is any patch to fix it ?
     Kindly advise.
Thanks and Best Regards
Wong Hock Lin

HI Sunny,
you are correct. Basically my issue was with the Tablespace PSAPSR3701, it was 100% full. So support package stuck. After adding space to the tablespace, I follow the below process.
================================
If your problem is not solved still, then you can do the following, however please verify with SAP support first:
1. Take a full offline backup of you solution manager server. So that you can revert back to the same point in case. Then start SAP system, and ensure you have tp and R3trans latest.
2.Pls make sure that you have NOT made any changes to import
buffer, use the command to verify
tp showbuffer <SID> tag=spam pf=<...transport profile>
3. check at OS level to see if there are any tp or R3trans still
running; if yes stop them.
4. The TRBAT and TRJOB tables should be empty, if there are any
entries take a backup of the table, and delete the entry, manually if
neccesary at database level
4. Pls issue the following tp command to manually import SP
tp R3I SAPKB70012 <SID> pf=/usr/sap/trans/bin/<Your TP_DOMAIN_SID.PFL>
-Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8
-Dsourcesystems= tag=SPAM
The return code for this tp call must be 0 or 4.
it will ask for modification adjusment then GOTO --> STATUS --> QUEUE --> Confirm Queue to get out from the error (spam_confirm_patch wrong_status:R)
It might ask for SPAU_RUN. continue if you have done before.
then click confirm under the support package tab.
===========================================================

How to copy pf-status from one program to another program

Hi Gurus,
Can any one tell me the procedure how to copy pf-status of one program to another program .if i want to copy pf-status which is in production server to development server how can i do this.pls help me out.
Regards.

Hi,
GO TO SE41,
Select Status,
In from u can give ur old pgm and staus name
In To u can ur new one .
Save and activate.
Regards,
S.nehru.

Hw to find out the status of the program...? like active / inactive?

Hi kindly let me know how to find out the status for the programs (like active / inactive).
I have 100s of zprograms; I want to know at a time which are all active and which are all inactive.
I heard some table is there, but dont know exactly, let me know if you have any idea
Akshitha.

Hi akshitha,
1. Active and Inactive status is stored in table REPOSRC.
2. Just goto that table in SE11/SE16,
     and enter (copy/paste) the list of your 100 programs.
3. <b>In that there is a field R3STATE
   Where A= Active
             I = Inactive</b>
From there u can filter as per ur requirement.
regards,
amit m.

CRM Middleware Monitoring: Adapter Status Information. Waiting Objects

Hello
I am having a problem sending messages of type RSREQUST from CRM to BW
I have been seeing in the SMWP transaction that we have waiting objects in Request Status of Adapter Status Information.
I dont know how I can start it or solve this error
Thanks in advanced
Best regards

Hi,
It seems that the maximum number of parallel processing threads(usually 5) have been set in ur system which is why the objects are in status WAIT. Status WAIT is not an error. To correct, would you check the transaction R3Ar3 for all requests tht are in running status. If you have 5 requests here, abort one or two out of them. Then go to SMQ2 and select the queue tht is in status WAIT. Unlock the queue immediately. It should change to status "READY" and should flow across to BW.
Reward points if it helps !!
Rgds
Priyanka Bansal

Adapter status determination by program

Similar Messages

Maybe you are looking for