CRM Middleware Monitoring: Adapter Status Information. Waiting Objects

Hello
I am having a problem sending messages of type RSREQUST from CRM to BW
I have been seeing in the SMWP transaction that we have waiting objects in Request Status of Adapter Status Information.
I dont know how I can start it or solve this error
Thanks in advanced
Best regards

Hi,
It seems that the maximum number of parallel processing threads(usually 5) have been set in ur system which is why the objects are in status WAIT. Status WAIT is not an error. To correct, would you check the transaction R3Ar3 for all requests tht are in running status. If you have 5 requests here, abort one or two out of them. Then go to SMQ2 and select the queue tht is in status WAIT. Unlock the queue immediately. It should change to status "READY" and should flow across to BW.
Reward points if it helps !!
Rgds
Priyanka Bansal

Similar Messages

CRM Middleware Monitoring Cockpit

Hi Gurus,
Iam new to the Middleware when i go to the TC - SMWP,
for the Generation Information -> Missing indexes Status is Yellow
for the Runtime Information -> Adapter Status Information -> Parameters in R/3 Backend(s) -> ECC System -> Parameters for object load management Status is Yellow
Does this lead to any problem or not and how to make it green can anybody help me out
Thanks

Hi Devi,
Yellow status means a pending request/Bdoc processing.
Generally, if you have R/3 CRM connection, then yellow means notification is not received from R/3 system since a bdoc being send to R/3 system from CRM system.
can you elaborate upon the description you get for the yellow status bdoc.
Best Regards,
Pratik Patel
<b>Reward with Points!</b>

Middleware Monitoring--Exchange Object Name

Hi
I am monitoring CRM middleware. In tcode SMW01 Iam getting an error as "Partially send, receivers have errors". Its long text indicates "Exchange object name could not be determined". Anybody knows wht this exchange object is and how to solve this error.
Useful suggestions will be awarded.
Regards
Deepika

Hi all,
Can anybody who have worked with middleware tell why the problem is appearing?
Thanks
Deepika

Data replication monitoring on MDG flex mode objects with Information Steward

Hi,
I am exploring different options available to setup data replication monitors on SAP MDG custom objects(flex mode). Basically my requirement is to setup rules in SAP Information steward which identifies if there are any missing records or mismatch between the data in MDG system and the replicated systems.
The challenge I am facing is that the tables generated by MDG framework for flex mode are not consistent and they keep changing if we change some key information in the MDG data model. Also the generated tables are not the same in each environment (like development, quality, production). Appreciate if anybody can provide suggestions on handling the MDG generated tables in SAP Information Steward.
Thanks in Advance.
Goutham

Hi Abdullah,
Thanks for your reply. I cannot write any ABAP code in Information Steward. As you mentioned I can always use MDG API to pull the active data from MDG but here I can only give the table names.
The other option as you mentioned, using DRF I can replicate the data in flat files to Information steward, but it is not making sense as I am validating with replicated data and not with actual data available in MDG. Other point is I don't think it is a good idea to replicate all the records periodically.
Thanks and Regards
Goutham

CRM Middleware Object extensions

Hi All -
Can someone send me the "CRM Middleware Object extensions for custom Bdoc developments/Bdoc Modeling" book and any stuff on Business Transaction Events (BTE)?
TIA,
Aarthi.

Hello Davy,
please do not request documents to be sent via Mail. Have you read Links to CRM Documentation.
Regards
Gregor

Details of database and status information of archived object can't be seen

Hi
I am trying to archive the ODS-0FIAP_O03 and the job overview(T.Code SARA) shows the status as finished. Attached screenshots show the statistics of written data objects and active records in spool. However when we display statistics(T.Code SARA ) , I do not see any details of database and status information of archived object.Please suggest where could the error be.
Also let me know if you want to see the related screenshots.
Will award high points.Thanks
Reenu Lodha

This could be an issue due to program error.
Would you provide me the archiving object so as to find OSS notes if available.
This is a common issue for most of the archiving objects..we do generally miss out the statistics..and that is after the modification in the program, this is ok.

Retrieving adapter status using com.sap.aii.af.monitor.api.AdapterStatusDat

I'm in the processing using this API to retrieve adapter status. I'm on SP17. Has anyone worked on it and if so, how does the code look like. Do we first connect to the desired XI box and call this api, directly. Any help appreciated.
Thank you.

Hi,
Please check servlet:
<host>:<port>/mdt/amtServlet
But how to get the code of it I don't know.
Regards,
Wojciech

CRM MIDDLEWARE QUERY FOR PRODUCT REPLICATION -URGENT

Hello All,
I am replicating the product categories(in SRM terminology) i.e. initia load of Material groups from backend(R/3) into the SRM system through the CRM Middleware.
At the r/3 side in the tcode SMQ1(Outbound Queue),i am getting the status as STOP while at SRM side(i.e. CRM middleware) in the tcode SMQ2(Inbound queue),i get the status READY.Also when I go in for the transaction of Monitoring Initial Load (R3AM1),I get the status as RUNNING.
Can anyone please tell me how much time it takes to download these objects because I had started the Initial Load for 4 Objects out of which the 1st object took 4 hrs to be downloaded!Please help.
Thanks & regards,
Disha D

Also I got an error in executing the report BBP_PRODUCT_SETTINGS_MW with the foll information text :-
The termination occurred in the ABAP program "SAPLSMSG" in "MESSAGE_STOR
The main program was "BBP_PRODUCT_SETTINGS_MW ".
The termination occurred in line 44 of the source code of the (Include)
program "LSMSGU02"
of the source code of program "LSMSGU02" (when calling the editor 440).
What customizatuon/configuration settings are required for this report to be executed succesfully????
Disha

Middleware Monitoring (Trn: SMW01) BDoc Msgs

Hi All,
We are currentely working on CRM 4.0 and i am facing an issue in the area of Middleware Monitoring (Trn: SMW01) where we monitor BDoc Msgs. There are aproximately 1000 BDocs in error state with "BDoc Validation Error" for a particular period e.g. from 1st Feb 2008 to 29th Feb 2008.
I was told that i can reprocess them (by selecting some BDocs regularly).
While Reprocessing them there is a pop-up stating "Reprocessing BDocs can cause inconsistency"
But still our team is going for "YES" option.
Can we do this?
or Is there any other way we can make them clear. Kindly advise me in this issue. It is bit URGENT and need to be addressed immediately.
Thanks and Regards,
Ramana Rao

Hi
It is not suggested to reprocess the error BDoc.
BDocs in Error status should be marked as deleted to avoid re-processing that might lead to inconsistencies.
By marking the BDoc as deleted saving its IDs the object ID is added to the BDoc Recovery Work List which allows for further analysis in transaction SMW3RC.
Two main selection options are possible from SMW3RC: Displaying the work list and displaying the process list.
The work list is the list of BDoc messages which needs to be recovered. As soon as a BDoc message is deleted in SMW01 by saving the identifiers, it is stored into that work list.
This list can be analyzed by the administrator who must decide which operation is adequate for processing the data. Possible operations are:
1. Extracting the data from CRM (Post)
2. Create a Request from R/3
3. Create a DIMA comparison
4. Mark the BDoc message as completed
As soon as the administrator has selected the desired operation, the entries are removed from the work list and stored into the process list.
From the process list, it is possible to start the desired operation.
For mass processing of the process list use transaction SMW3RCW

Using JMX to get status information about NetWeaver cluster

Hi everybody,
We are trying to use JMX to get some status information about NetWeaver cluster.
For example, using the MBean with the name u201Ccom.sap.default:name=EL1,j2eeType=SAP_J2EEClusteru201D we can obtain the list of all instances running in cluster. Here an instance is a u201CJava instanceu201D in the NetWeaver terminology.
The method u201CgetInstanceNodeIDsu201D provides us with a list of all nodes of an instance.
Concretely, calling this method for a cluster running on one machine with two java processes, we get the following list of node Ids: u201C0, 1476420, 1476450, 1476451u201D where the last two correspond to the two java processes.
What are the first two node Ids from the list?
How can the last two node Ids be identified as java processes?
How can we obtain status information about each java process (node id) ?
Thanks for all ideas,
Radu

As there seems to be a lot of interest in this subject, and since I found some form of solution, I thought I'd share it with you.
In the es-cli interface, there is a thing called browse mode. Activate it by typing browse after logging in.
Now you can easily browse your network and all of the managed objects. Use getattributes at the end of each branch to see the properties of objects. So far, I've indexed all of the kernel reader module, the health monitor module, the common config reader and the config reader for workgroup servers. If my employer allows, I will post results to http://tille.garrels.be/training/sunmc/ - check later this week.
Machtelt.

Message Monitoring with status delivering

Hello,
I have an scenario R/3 (Proxy) -> XI -> File.
Alls is successful in sxmb_moni, and there is nothing in SMQ1 and SMQ2, but in message monitoring ( adapter engine ) the message appears in status delivering.
The quality of service is exactly once. I checked the adapter and is in green status and the in the log the last message is Success The message status set to DLNG.
I've been searching for old messages, but for the same interface all the messages are with status delivering.
I can't cancel or resend the messages. Then I do the update but after that when I try to resend I obtain the same message "Update the status".
The adapter is an FTP connection with Connect Mode "Permanently".
Do you know what could be the problem and how to solve it? All the messages we send are in delivering status.
Many thanks in advance.
Regards,
Xavier.

Hi Xavier Carbonell ,
i also faced same problem. In my case some other Communication channels were in error state so all messages are struct in Messaging System, all my messages status went "To be Delivering". Please check all ur Communication channels are in green.
For futher information check the below link.
Flat file with two separators
If it is still not solved then restart J2EE engine.
Thanks,
Venkatesh
Edited by: venkatesh bs on Apr 14, 2008 12:09 PM

CRM to R3 partner flow via CRM Middleware ...

Hi all ,
Any one can tell me where the setting of the filter in standard has been done for the fields of the BUT000 which flows to ECC R3 in the middleware .
Actually the requirement is to send some specific data of all the ship_tos which is created in CRM .
It would be even greate if any one can share the document of CRM Middleware which will give from the basic of the Middleware configuration ,Adapter objects ,attribute settings .
Thanks ,
Kashim Raja

Hi Kashim,
You can maintain the filter settings for business partners in TCode "R3AC1". Please select the Business object "BUPA_MAIN", click on filter and maintain the required filters under "Table structure within object" for BUT000 table.
Please refer this help portal for more info :
http://help.sap.com/saphelp_crm70/helpdata/EN/56/6b34429cb0907ce10000000a114b1d/frameset.htm
http://help.sap.com/saphelp_crm70/helpdata/EN/1d/09d1e713d711d6999e00508b6b8a93/frameset.htm
Regards,
Chethan
Edited by: Chethan Kumar C M on Sep 27, 2009 7:46 AM

Version Compatibility of SAP R/3 4.6 C with SAP CRM 5.2 + CRM middleware

Dear SDN team,
We are trying to Integrate SAP R/3 4.6c with SAP CRM 5.2 using CRM middleware.
We wanted to know the following :
1.Technical and Functional feasibility in integration of CRM 5.2 and R/3 4.6c. What are problems for these versions ? ( In Brief )
2.We are trying to move the Objects BP , Quotes and Products from R/3 to CRM 5.2. Has anyone done this and can someone give us a brief description of the problems while doing the same
3.Any other useful suggestions would be very helpful regarding CRM middleware.
Kindly reply on this post . Points would be awarded.
Thanks and Regards
Dinesh and Ritvij
Email : [email protected]

Hello Ritvij,
Regarding middleware ,are you down loading plants? bacause down load object objects DNL_PLANT is obsolete.
Unusable middleware objects :
DNL_CUST_BASIS3
DNL_CUST_PROD0
DNL_CUST_PROD1
DNL_CUST_SRVMAS
and the master data objects
MATERIAL
SERVICE_MASTER..
Find composite note for middleware at 872533..
What is the leading system for Order creation?
Please refer notes 490932 for more info about transactional doc replication between the two systems.
Please assign points.
regards,
Muralidhar Prasad Chatna

SMOEAC - CRM Middleware

Hi guys,
I configured the CRM middleware component to replicate materials,services and config objects but in the SMOEAC trx, on site selection, there only appears the CRM site, but not the R/3 backend site.
Table SMOF_ERPSH shows the following:
RFC DEST    ERP RELEASE ERPLOGSYS SITETYPEID
none              --                       -                       CDB
SRP             700                    SRP                  CRM
SRP is the Destination RFC defined in SAP R/3 and also the logical system ID of our SRM 5.0 System
What went wrong? How to resolve it?
Thanks for any help.
Aart

Hi Consultoresvision,
Can you pl. tell me what configuration you need to maintain for CRM middleware components.
After client copy for SRM 4.0 from Production to QA, the SMOEAC is totally erased and there is no objects. I am aware of how to create sites for R/3 and SRM after the object of "Site" is available. But here the object "Site" itself is missing.
Any inputs would be appreciated.
Thanks
Venkatesh

ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1,

Hello,
I am installing ECC 6.0 on database Maxdb7.6. window 2003 service pack 2 processor AMD 3400 RAM 2 GB,
I am getting the following error at the ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
WARNING 2010-10-29 22:40:15
Execution of the command "C:\j2sdk1.4.2_09\bin\java.exe -classpath migmon.jar -showversion com.sap.inst.migmon.imp.ImportMonitor -dbType ADA -importDirs D:\Ides\exportdb\db1\EXP1;D:\Ides\exportdb\db2\EXP2;D:\Ides\exportdb\db3\EXP3;D:\Ides\exportdb\db4\EXP4;D:\Ides\exportdb\db5\EXP5;D:\Ides\exportdb\db6\EXP6;D:\Ides\exportdb\db6\EXP7;D:\Ides\exportdb\db6\EXP8;D:\Ides\exportdb\db6\EXP9;D:\Ides\exportdb\db6\EXP10;D:\Ides\exportdb\db6\EXP11 -installDir "C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS" -orderBy "" -r3loadExe E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -tskFiles yes -extFiles no -dbCodepage 4103 -jobNum 3 -monitorTimeout 30 -loadArgs " -nolog -c 0" -trace all -sapinst" finished with return code 103. Output: java version "1.4.2_09"Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)Import Monitor jobs: running 1, waiting 1, completed 17, failed 0, total 19.Loading of 'SAPSSEXC' import package: ERRORImport Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
ERROR 2010-10-29 22:40:15
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2010-10-29 22:40:15
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
import_monitor.java.log
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
Import Monitor jobs: running 1, waiting 1, completed 17, failed 0, total 19.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
PLZ help me
Thanks&regards
Vijay kumar
Moved from ABAP, General
Edited by: kishan P on Nov 2, 2010 10:17 AM

ERROR: 2010-10-29 22:07:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-10-29 22:07:56
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-10-29 22:07:56
1 error(s) during processing of packages.
INFO: 2010-10-29 22:07:56
Import Monitor is stopped.
INFO: 2010-10-29 22:39:45
Import Monitor is started.
CONFIG: 2010-10-29 22:39:45
Application options:
dbCodepage=4103
dbType=ADA
extFiles=no
importDirs=D:\Ides\exportdb\db1\EXP1;D:\Ides\exportdb\db2\EXP2;D:\Ides\exportdb\db3\EXP3;D:\Ides\exportdb\db4\EXP4;D:\Ides\exportdb\db5\EXP5;D:\Ides\exportdb\db6\EXP6;D:\Ides\exportdb\db6\EXP7;D:\Ides\exportdb\db6\EXP8;D:\Ides\exportdb\db6\EXP9;D:\Ides\exportdb\db6\EXP10;D:\Ides\exportdb\db6\EXP11
installDir=C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS
jobNum=3
loadArgs= -nolog -c 0
monitorTimeout=30
orderBy=
r3loadExe=E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2010-10-29 22:39:45
List of packages with table structure: 'SAP0000'.
CONFIG: 2010-10-29 22:39:45
List of packages with views: 'SAPVIEW'.
TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS\DDLADA.TPL' template file is started.
INFO: 2010-10-29 22:39:45 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\Program Files\sapinst_instdir\ERP\SYSTEM\ADA\CENTRAL\AS\DDLADA.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2010-10-29 22:39:45
Data codepage 4103 is determined using TOC file 'D:\Ides\exportdb\db1\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2010-10-29 22:39:45 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0
ERROR: 2010-10-29 22:39:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'E:\usr\sap\IOL\SYS\exe\uc\NTI386\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2010-10-29 22:40:15
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2010-10-29 22:40:15
1 error(s) during processing of packages.
INFO: 2010-10-29 22:40:15
Import Monitor is stopped.

CRM Middleware Monitoring: Adapter Status Information. Waiting Objects

Similar Messages

Maybe you are looking for