Adaptive content
Is there a way using InDesign or linking to external media such as an AI or PSD file that would have the content adapt to the given size without distortion/scaling? An example would be a background fill created with illustrator or photoshop (InDesign cannot create such?) and applying that to a 16:9 and 4:3 layout, such as 1920x1080 and 1024x768 resolutions. Additionally if I setup an InDesign file to have a rounded corner rectangle that expands it's width so there is only 100px padding on each side if I imported that file into a new indesign document and sized it to 50% of the page would it maintain the 100px padding and not have distorted/scaled corners while only extending from the left of the document to middle?
I have little experience with InDesign and looking to use it for UI design, photoshop is too static and doesn't seem to be able to link/update external media, smart objects of imported files become copies within the psd document If you know of any other alternative that might be worht looking into please let me know.
We spoke with BEA about this and they are simply not supported in the current rich text editor.
We wanted to put links in publisher to link to portal pages and we have come up with some workarounds. One workaround is to link to the page like this
http://server.com/portal/server.pt?uuID={XYX}
This link will open a page given a uuid. You can throw in mode=2 etc also. UUids are great because they don't change during a migration from dev to prod.
Hope this helps.
6.5 is going to include friendly urls and a better rich text editor.
Similar Messages
-
Receiver File Adapter Content Conversion Problem.
Hi All,
I am getting in receiver file adapter due to content conversion setting. Problem is that all the fields coming in file adapter are optional. In content conversion , i have specified fieldfixedlengths. So whenever any optional field is not present , it fails . How should we handle it? is there any option to declare fields as optional, I know that is the there for sender adapter. But no. of fields is also very large, so putting each and every field as optional is very time consuming.
What should i do?
Ranjeet Singh.Hi Daniele,
Instead of using the standard funciton , i created a UDF for handling this situation.
My logic is UDF is like
//write your code here
int Size = Integer.parseInt(Truncate_Size);
String Return_Value = "";
if (!("".equals(Input)) )
if (Input.length() > Size )
Return_Value = Input.substring(0,Size);
else
Return_Value = Input.substring(0, Input.length());
else
for(int i = 0; i< Size ; i++)
Return_Value = Return_Value + " " ;
return Return_Value;
SO in this case also , it should be able to handle empy source element. But it is not working. -
Receiver File Adapter - Content Conversion
Hi,
I don't quite get this:
I have a structure
<?xml version="1.0" encoding="UTF-8"?>
<AnElement1>
<AnElement2>
Bla bla bla
</AnElement2>
</AnElement1>
I want to convert this to a flat file with a line containing
Bla bla bla
In te receiver file adapter I define the following:
In the 'Content Conversion Parameters'
Recordset Structure : AnElement2
Name Value
AnElement2.addHeaderLine 0
AnElement2.fieldSeparator 'nl'
AnElement2.endSeparator 'nl'
This results in an Empty file each time indicating some error somewhere.
What am I missing?
Thanks
AndreHi Andre,
Just check the link <a href="http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm">File content conversion</a>
Also check out this web log <a href="/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 to TXT</a>
Is there any error log shown in File adapter ?
Regards,
Keith
Message was edited by: keith thompson -
Attachment of original message in file sender adapter content conversion
Hi,
does anybody know how I can configure a file sender communication channel (with content conversion) so that the original file is added to the XI SOAP message as attachment? Maybe this is just a parameter in "Advanced" tab. (The content conversion itself is not an issue.)
The result should be the "Main Document" (XML-message) and the "original document" as two attachments in the SOAP payload.
The reason for this is that the original file should be archived with the XML message as it was before the XML content conversion of the file sender adapter took place.
Thanks,
Philipporiginal file is added to the XI SOAP message as attachment?
The "Advanced" tab -> additional files added in file adapter should act as the attachment to soap receiver adapter if u select the "Keep Attachments" option in soap receiver communication channel.
What do u want to do in FCC is a bit unclear?
Regards,
Prateek -
Receiver AS2 Advantco Adapter Content type change
Hi All,
I am working on SFTP to As2(Advantco) scenario. We are sending the txt files to target.
As of now file is sent with content type application/xml. But target system is asking to change it to "application/octet-stream"
In the AS2 adapter guide, there is section 3.4.4.8. MIME Settings which talks about content type change.
Unfortunately i am not seeing that in the receiver channel.
does anyone know how to change the content type for AS2 channel?
Will standard adapter module work on third party adapter? like messageTransformBean
Thanks.This could be because of adapter metadata is not updated one?
>>> Yes. It's very much possible.
Will standard adapter module work on third party adapter? like messageTransformBean
>>> AFAIK - Advantco adapters does support MTB. -
Sender File Adapter - Content Conversion
HI Friends,
I got a scenario where I need to convert the File to XML document through Sender file adapter..
My file looks like below.
BATCH1234........
12DASER123142JMM
237DSAFDLKC839890
45SDFLASJ90011
BATCH3455...
132FGAR
SD21352525
BATCH998898...
123145DSRTW
12FSTS
So there is a Header and Body for each record set..
My XML Structure is as follows.
<TimeStructure>
<TimeRecord>
<ControlRec>
<Field1>BATCH </Field1>
<Field2> ...</Field2>
</ControlRec>
<DataRec>
<F1> ...... </F1>
<F2> ...... </F2>
</DataRec>
</TimeRecord>
<TimeRecord>
<ControlRec>
<Field1> BATCH </Field1>
<Field2> ADFAS </Field2>
</ControlRec>
<DataRec>
<F1> ...... </F1>
<F2> ...... </F2>
</DataRec>
</TimeRecord>
</TimeStructure>
The blog <a href="/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem:///people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
is somewhat relevant to my requirement.
But the problem is I have the keyfield "BATCH" for my header file but don't have any <b>key field in the data record</b> of the input file.
Please help me out how to mention the configuration parameters.
Regards,
KumarHi,
If you don't have constant key value for your detail records, then you can not directly get the required xml.
So in this case, you can read all the records in a common Row model, i.e each record will be considered as a one row with all the values, and then split this row with Substring or java functions in the mapping.
Even you can do this in the Adapter module .
If you have key value for each record to identify then you can try with content conversion.
Regards,
Moorthy -
File sender adapter: Content conversion for very deep nested structure
Hi all
I have a file which looks like this
HDOCKET 9800000660980000061911062009AA123456bbWM100012349800000619
DDOCKET_TEST001 4012YAG1
WZOA00000000010000000001
WZOA00000000020000000002
WZOB00000000030000000003
IAAXX000001
IAAXX000002
C0000000000000000000100000000000000000001000000000000000000020000000000000000000300000000000000000004
T2
and my structure is
Header - 1
Detail - 0....Unbounded
Bag - 0.....Unbounded (sub node of detail)
Track - 0.....Unbounded (sub node of detail)
Customer - 0.....Unbounded (sub node of detail)
Trailer - 1
and in the file sender adapter i mentioned the following content conversion setting
HEADER,1,DETAIL,*,Bag,*,Track,*,Customer,*,TRAILER,*
But when i go and see in the monitoring i received the following conversion
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_REQ xmlns:ns="http://royalmail.com/dd_c">
<HEADER>
<ID>H</ID>
<INT>DD</INT>
<CAR>9899999660</CAR>
<CUS>9899999619</CUS>
<POST>11062009</POST>
<NUMBER>AA123456bbWM10001234</NUMBER>
<ACC>9899999619</ACC>
</HEADER>
<DETAIL>
<ID>D</ID>
<Bag>DOCKET_TEST001</Bag>
<S>4012</S>
<Code>YAG</Code>
<mat>1</mat>
<count/>
<Mixed />
</DETAIL>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
<TRAILER>
<ID>T</ID>
<Count>2</Count>
</TRAILER>
</ns:MT_REQ>
whereas i wanted it like:
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_REQ xmlns:ns="http://royalmail.com/dd_c">
<HEADER>
<ID>H</ID>
<INT>DD</INT>
<CAR>9899999660</CAR>
<CUS>9899999619</CUS>
<POST>11062009</POST>
<NUMBER>AA123456bbWM10001234</NUMBER>
<ACC>9899999619</ACC>
</HEADER>
<DETAIL>
<ID>D</ID>
<Bag>DD_TEST001</Bag>
<S>4012</S>
<Code>egg</Code>
<mat>1</mat>
<count/>
<Mixed />
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
</DETAIL>
<DETAIL>
<ID>D</ID>
<Bag>DD_TEST002</Bag>
<S>4012</S>
<Code>egg</Code>
<mat>1</mat>
<count/>
<Mixed />
<Bag>
<ID>W</ID>
<Zone>zzzzzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
</DETAIL>
<TRAILER>
<ID>T</ID>
<Count>2</Count>
</TRAILER>
</ns:MT_REQ>
i.e. i need all Bag ,Track and Customer inside detail tag.
could anyone help me in this..i've already searched SDN and got some link as useful but none of them were totally related.
Regards
NainaNaina
Pls. check my forum link, i had the single level hierarchy XML file which I converted into nested structure & then into flat file.
File Conversion in Rec File Adapter with subnodes
This can give you an idea how to go ahead. Let me know in case you need any more info about this. -
File adapter content conversion
Hi all,
We are having File to File Scenario
We are facing problem in Content conversion in File
Adapter(Sender)
The source file is in text format and fields are
seperated by '|' character
The source file structure is :
Header|No. of Records
Data Record1
Data Record2
Data Recordn
Trailer|No. of Records
where Data Recordn is of type Field1|Field2|Field3|Field4
and the number of data records is variable
e.g.
Header|5
2|144012|20050801|20050801
212|012|20050801|20050801
244012|2|20050801|20050801
2144|144012|20050801|20050801
212|012|20050801|20050801
Trailer|5
Now , we need to ignore the contents of Header and Trailer Records
For Header , we are setting the property Document Offset to 1
Hence the Header record is ignored
However , we are facing problems in ignoring the Trailer record
We want to know :
1. Is there a direct way ( or some propety ) wherein we can ignore the last record of the file ,
which in this case is Trailer record
2. We also tried the following :
a. We set the Recordset Structure to : row,*,trailer,1
b. However in this case , the keyField is required for row ;
but since the number of data records is variable ,
the keyFieldValue cannot be specified
How should we go about in this case
Please guide us on this
Regards
ShikhaHi all
Thanks for replies
Actually , we are able to ignore header and that is not an issue
Now if we need to discard the trailer record , we believe that RecordSet Structure should be <b>row,,trailer,1</b> or <b>header,1,row,,trailer,1</b>
However , since structure is <b>row,*</b> ; we need to specify the <b>keyField</b> column for row ( data records )
Since <u>number of data records</u> is variable , we are not able to set the <b>keyFieldValue</b> for <u>row ( data record )</u>
Can you'all please guide us on this as we are stuck on this .
Regards
Shikha
Message was edited by: Shikha Jain -
Sender SMTP Adapter / Content Based Routing / Mapping of an attachement
Hi all,
I'm still working on my SMTP --> PI --> Proxy scenario (asynchronous). I've tried several different properties of my sender communication channel (type = mail), but I didn't find the correct configuration. Hopefully it exists.
I'm working with PI 7.0 SP10.
I get an inbound message via Mail using sender SOAP Adapter. The message payload itself is an attachement. Now I'd like to do the following:
a) Content Based Routing in Receiver Determination based on the message subject
b) Mapping of the Attachement XML message to my inbound proxy interface
Now, trying to do so, I didn't get it work. When I use XIPAYLOAD with keep attachements, I get two attachements in my inbound message (one in XI mail package format having the subject within, one with the IDoc structure I'd like to map). How can I assign the second attachement to be used for my message mapping?
When I use XIALL instead of XIPAYLOAD, I think the mapping will work but my subject for content based routing will be lost, right? That one I didn't get running because of another failure, so I don't know the exact behaviour of the adapter for that configuration.
Anybody out there who know the correct configuration for the sender mail adapter for my small scenario above?
BR
HolgerHi Stefan,
sorry for misunderstanding, for sure I'm using the mail adapter, not the SOAP Adapter. I'm actually on the same direction. I'm using XIPAYLOAD as message protocoll (having the attachement as the content for the mapping --> correct). Furthermore I've also found the predefined context objects for the content based routing receiver determination.
What I missed was setting the following properties in the communication channel:
To store adapter attributes in the message header of the XI message, set the Set Adapter-Specific Message Attributes indicator.
The following attributes are added to the XI message header if the sender makes them available, and if the Variable Transport Binding indicator is set.
Now it's working
BR
Holger -
Sender Mail Adapter Content Conversion
Hi All,
I just want to know if we can send a flat file(Rather Than the XML) with content conversion using Mail Adapter. If yes then what are all the possible ways for this.
I have tried but i am sucessful in sending the complete payload as a XML file, but i want the file with the content conversion, so that this should be able to picked by the third party systems.
Will be oblidge if any supported blog or pdf is provided for the same.
Thanks in Advance.
JayHi,
Now for the negative items, i want to send them back to business as flat file format
using the mail adapter as attachment. This will help them to process the file as for there
requirement.
Since you need to send an email message you have to use the format mentioned here: (S-UserID required)
https://websmp205.sap-ag.de/~sapidb/012006153200000361852004E/ximail30_xsd.txt
Save this file as an XSD in you local system and upload it as an External Definition in your XI server.
Develop MI based on this External Definition (IN, ASYNC)
Create an Interface Mapping with Source as the file containing Negative items and target as the above developed MI
Now you need to develop an XSLT mapping (can use StylusStudio to do it) between the source and target Message Types
This XSLT mapping has to be designed in such a way that it extracts the payload out of the Negative Items message and maps it to the target (Content) field....you need to use CDATA element of XSLT here.
In this mapping itself you can define to what email-id you want to send the message.....
Everything happens on the XI --> Business service side...so it is not the sender channel but is the receiver channel:)
Your XSLT mapping will look something like:
<Mail>
<Content>
XSLT CODE
</Content>
</Mail>
where Mail and Content are the tags in the email message format...the External definition one.....
If you are new to XSLT then refer to my answer in this thread...
Re: JAVA MAPPING
regards,
Abhishek. -
Mail adapter - content coming as attachment
Hellow experts,
I am sending data from R3 to emails using mail adapter. I am using the follwoing mail package format.
<?xml version="1.0" encoding="UTF-8" ?>
<ns1:Mail xmlns:ns1="http://sap.com/xi/XI/Mail/30">
<Subject>Water Catchment Form</Subject>
<From>[email protected]</From>
<To>[email protected]</To>
<Reply_To>[email protected]</Reply_To>
<Content_Type>text/plain</Content_Type>
<Content>You have work order(s) !!</Content>
</ns1:Mail>
In my mail adapter, I have ticked
Use Mail Package Format and
Keep Attachments
I am getting the content as an attachment - I want it inside the email.
The attachment is coming with a name Untitled.pdf - I need the actual name.
Am I missing anything?
What can I do to get things right?
ThnxHi Sabbir
refer this Pdf may be helpful for u
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Thanks!! -
File Receiver Adapter - Content Conversion
Dear All,
We are using <b>DB to file Scenario</b>.We are using File Content conversion to get a File Comma Separated.
Data is picked up from the DB and our payload before getting in to File adapter is given below.
<?xml version="1.0" encoding="UTF-8" ?>
<ns6:AssoInfo_MT xmlns:ns6="urn:NDB2File2DB">
<AssoInfoList>
<AssoInfoNode>
<Name>ABCX</Name>
<ID>31154</ID>
<Salary>10000.0</Salary>
</AssoInfoNode>
<AssoInfoNode>
<Name>ASDAS</Name>
<ID>18978</ID>
<Salary>10000.0</Salary>
</AssoInfoNode>
</AssoInfoList>
</ns6:AssoInfo_MT>
In File content conversion we are giving
<b>AssoInfoNode.addHeaderLine = 0
AssoInfoNode.fieldSeparator = ,
AssoInfoNode.endSeparator = 'nl'</b>
We are getting output as
<b>ABCX,ASDAS</b>
But the <b>expected</b> output is
ABCX,31154,10000.0
ASDAS,18978,10000.0
What change we need to do in our File Receiver Adapter configuration.
Regards,
VedavyasHello,
Test without these 2 options :
AssoInfoNode.addHeaderLine = 0
AssoInfoNode.endSeparator = 'nl'
I think your problem is with the "endSeparator", it is not necessary.
A new line is created for each new AssoInfoNode automaticaly.
Regards,
Chris -
Complex XML to Plain in JMS adapter "Content conversion module"
Hi!
I have read the document on "How To use the content conversion module with XI3.0 J2EE JMS Adapter", and it says only SimpleXML can be converted in the receiver channel.
I had hoped for a solution at least as good as in the File/ftp adapter, where complex XML can be transformed to files.
Are there plans to include complex XML conversion in the JMS adapter?
I can not use the file adapter as I need to change the file name and destination, and that can not be done by adding own module to its single module.
Any idea how I can achieve what I want?
To only way I can find, is to create a file using the file/ftp adapter, and then pick it up again and treat all the lines as the same structure (one row = one xml field). Then output this new xml message to file, using the JMS adapter and add any modules with name and destination determination.
Appreciate any help!
Regards,
Oeystein EmhjellenHello,
Have you tried to use an XSLT mapping within the IE?
I have, at one customer site, created a XSLT message mapping which converts the XML to a fixed length ASCII file format. I than added the XSLT message mapping as a second mapping step on the interface mapping.
In this case I was able to publish a fairly complex fixed length file format to MQ Series via the JMS adapter.
/Johan -
Receiving file adapter content conversion issue
Guys,
Could someone please help me with a Receiving file adapter issue?
My output structure is something like this:
Vendor_file_MT (occurence 1)
--Recordset (occurence 0..unbounded)
Vendor (occurence 1)
Field1
Field2
Field3
Field73
Field74
My content conversion is very simple:
Recordset Structure: Vendor
Parameters:
Vendor.fieldFixedLengths 30,30,30, (...) ,1,27
Vendor.fixedLengthTooShortHandling Cut
Vendor.endSeparator 'nl'
If I don't do the content conversion, it works fine, I get all the fields in the XML format.
When I do the content conversion however, I get multiple lines but only the very first field of each line.
What could be the problem? What am I missing here? Any idea?
Your help would be much appreciated.
Thanks,
ViktorVarga:
Its little strange that its not working even after adding that. Did you check the receiver channel in your RWB for any logs. Add the statement in my previous post and Also try to clear the Cache and activate the channel again..See if it works
Glad it worked
Edited by: Guru on Apr 21, 2008 3:15 PM -
File Adapter - Content conversion parameters at Receiver
Hi all,
I'm trying to translate a XML message to a text line file.
My XML message is this:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:Proveedor_100011 xmlns:ns1="http://sap.com/xi/webservices/buyordint">
<config>
<directory>c:/tmp</directory>
<filename>dynamicFile3.txt</filename>
</config>
<root><string>Header;423423</string>
<lines>
<value>LINE;</value>
</lines>
</root>
</ns1:Proveedor_100011>
I only want to write to text file the "root" TAG content.
I try different "Content conversion parameters" in the integration builder (configuration)
For example:
RecordSet Structure: root
root.addHeaderLine 0
root.fieldSeparator ;
root.endSeparator ;
but the better result is all XML content.
Can someone tell me how to skip "Config" TAG and only write the "ROOT" one?
I'll apreciate any help.
Thanks in advance,
Diego.Hi Sravya,
I've tried again without better luck.
I change the root element of my message from
Proveedor_100011 to Proveedor100011. (removed underscore)
I created the next message as in your weblog:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://sap.com/xi/webservices/buyordint" targetNamespace="http://sap.com/xi/webservices/buyordint">
<xsd:element name="Proveedor100011" type="Proveedor100011" />
<xsd:complexType name="Proveedor100011">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
54650790d48f11dab96c001438eb3b44
</xsd:appinfo>
</xsd:annotation>
<xsd:sequence>
<xsd:element name="root">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f20d48e11dab854d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="head" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f21d48e11da8f1dd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="rows" minOccurs="0" maxOccurs="unbounded">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f22d48e11da894ad06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="value" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f23d48e11dab889d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="filenode">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f24d48e11daab91d06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
<xsd:complexType>
<xsd:sequence>
<xsd:element name="filename" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f25d48e11da8becd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
<xsd:element name="filepath" type="xsd:string">
<xsd:annotation>
<xsd:appinfo source="http://sap.com/xi/TextID">
45f01f26d48e11dac56cd06ec0a8004a
</xsd:appinfo>
</xsd:annotation>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
<Proveedor100011>
<root>
<rows>
<value></value>
</rows>
</root>
<filenode>
<filename></filename>
<filepath></filepath>
</filenode>
</Proveedor100011>
I've tried to set "Recordset Structure" in file adapter configuration to "root,filenode" and to "Proveedor110001, filenode" but no output is writed
We are using XI version: SAPKB64015, which version did you use in your weblog?
Thanks and regards,
Diego. -
JMS Adapter Content Conversion
Hi,
I am looking for some help on JMS Receiver content conversion, to put a delimited file on MQ series queue.
I tried the below link, but not able to access the document.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/3.0/how to use the content conversion module with the xi 3 j2ee jms adapter
If anyone has a copy of the pdf document on JMS content conversion, could you please email it to me at my id : [email protected]
Rgds
R ChandrasekharI had send the required PDF
Regards
Arpit seth
Maybe you are looking for
-
Screen Fading on Macbook Pro just over a year old
My screen is fading around the edges and a line across the middle of the screen as if the coating is wearing off. I have done nothing but take car of my mac. NO Chemicals no rubbing just a light dusting every now and again with micro fibre cloth I ac
-
How to populate values in Apex item
Hi, I am using apex collection item to capture data my requirement is to calculate data using the apex item This requirement is like this. I am using a SQL query like this select wwv_flow_item.TEXT(1,NULL,20,10) "A", wwv_flow_item.TEXT(2,NULL,20,10)
-
Dear Anyone who can help me, I inherited my mothers iPad version 1 after my mother passed away. Before she passed away, I had downloaded numerous books that I NEED to keep on the iPad. I now have MY OWN APPLE ID. How can I use this iPad "USING MY
-
New hard drive - how to import iTunes and Mail only from Time Machine backup
Hi I am installing a new boot drive into my MacPro. When I do this, I only want to copy over initially Mail and iTunes as previously backed up in Time Machine. Is there an simple way to do this without a complete copy of my last Lion install going
-
How to create valid values for button
Hi,all I want put valid values to button like copy from or copy to functionality is it possible. if u have idea plz post it..? by Firos.C