Attachment of original message in file sender adapter content conversion

Hi,
does anybody know how I can configure a file sender communication channel (with content conversion) so that the original file is added to the XI SOAP message as attachment? Maybe this is just a parameter in "Advanced" tab. (The content conversion itself is not an issue.)
The result should be the "Main Document" (XML-message) and the "original document" as two attachments in the SOAP payload.
The reason for this is that the original file should be archived with the XML message as it was before the XML content conversion of the file sender adapter took place.
Thanks,
Philipp

original file is added to the XI SOAP message as attachment?
The "Advanced" tab -> additional files added in file adapter should act as the attachment to soap receiver adapter if u select the "Keep Attachments" option in soap receiver communication channel.
What do u want to do in FCC is a bit unclear?
Regards,
Prateek

Similar Messages

File sender adapter: Content conversion for very deep nested structure

Hi all
I have a file which looks like this
HDOCKET 9800000660980000061911062009AA123456bbWM100012349800000619
DDOCKET_TEST001 4012YAG1
WZOA00000000010000000001
WZOA00000000020000000002
WZOB00000000030000000003
IAAXX000001
IAAXX000002
C0000000000000000000100000000000000000001000000000000000000020000000000000000000300000000000000000004
T2
and my structure is
Header - 1
Detail - 0....Unbounded
 Bag - 0.....Unbounded (sub node of detail)
 Track - 0.....Unbounded (sub node of detail)
 Customer - 0.....Unbounded (sub node of detail)
Trailer - 1
and in the file sender adapter i mentioned the following content conversion setting
HEADER,1,DETAIL,*,Bag,*,Track,*,Customer,*,TRAILER,*
But when i go and see in the monitoring i received the following conversion
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_REQ xmlns:ns="http://royalmail.com/dd_c">
<HEADER>
<ID>H</ID>
<INT>DD</INT>
<CAR>9899999660</CAR>
<CUS>9899999619</CUS>
<POST>11062009</POST>
<NUMBER>AA123456bbWM10001234</NUMBER>
<ACC>9899999619</ACC>
</HEADER>
<DETAIL>
<ID>D</ID>
<Bag>DOCKET_TEST001</Bag>
<S>4012</S>
<Code>YAG</Code>
<mat>1</mat>
<count/>
<Mixed />
</DETAIL>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
<TRAILER>
<ID>T</ID>
<Count>2</Count>
</TRAILER>
</ns:MT_REQ>
whereas i wanted it like:
<?xml version="1.0" encoding="utf-8" ?>
<ns:MT_REQ xmlns:ns="http://royalmail.com/dd_c">
<HEADER>
<ID>H</ID>
<INT>DD</INT>
<CAR>9899999660</CAR>
<CUS>9899999619</CUS>
<POST>11062009</POST>
<NUMBER>AA123456bbWM10001234</NUMBER>
<ACC>9899999619</ACC>
</HEADER>
<DETAIL>
<ID>D</ID>
<Bag>DD_TEST001</Bag>
<S>4012</S>
<Code>egg</Code>
<mat>1</mat>
<count/>
<Mixed />
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
</DETAIL>
<DETAIL>
<ID>D</ID>
<Bag>DD_TEST002</Bag>
<S>4012</S>
<Code>egg</Code>
<mat>1</mat>
<count/>
<Mixed />
<Bag>
<ID>W</ID>
<Zone>zzzzzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>ZOA</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
<Bag>
<ID>W</ID>
<Zone>zzz</Zone>
<Item>0000000001</Item>
<Number>0000000001</Number>
</Bag>
</Bag>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Track>
<Track>
<ID>I</ID>
<Item>AAXX000001</Item>
</Tracked>
<Customer>
<ID>C</ID>
<OrigCustomer>00000000000000000001</OrigCustomer>
<Field1>00000000000000000001</Field1>
<Field2>00000000000000000002</Field2>
<Field3>00000000000000000003</Field3>
<Field4>00000000000000000004</Field4>
</Customer>
</DETAIL>
<TRAILER>
<ID>T</ID>
<Count>2</Count>
</TRAILER>
</ns:MT_REQ>
i.e. i need all Bag ,Track and Customer inside detail tag.
could anyone help me in this..i've already searched SDN and got some link as useful but none of them were totally related.
Regards
Naina

Naina
Pls. check my forum link, i had the single level hierarchy XML file which I converted into nested structure & then into flat file.
File Conversion in Rec File Adapter with subnodes
This can give you an idea how to go ahead. Let me know in case you need any more info about this.

File Sender Adapter: Content Conversion :Mandatory parameter 'xml.keyfieldN

i have a scenario where i had to pick a flat file and post it to RFC.
on the basis of keyfields i had to pick the values
but i am getting mandatort field xml.keyfieldnamec: no value
my flat file is of type :
E2EDL20 0200083662685
E2EDL24 02090000110786293200PCE
E2EDL24 02090000210786301895PCE
E2EDL20 0200083662685
E2EDL24 02090000110786293200PCE
E2EDL24 02090000210786301895PCE
My FCC parameters are :
RecordSet Structure :E2ED20,,E2E24,
RecordSet sequence :Ascending
Keyfield Name: KG
E2ED20.fieldNames KEY01,VBELN
E2ED20.keyFieldName KEY01
E2ED20.keyFieldValue 'E2EEDL20'
E2ED20.fieldFixedLengths 7,33
E2ED20.endSeparator 'nl'
E2ED20.processFieldNames fromConfiguration
E2E24.keyFieldName KEY02
E2E24.keyFieldValue 'E2EEDL24'
E2E24.fieldNames KEY02,POSNR,CHARG,LFIMG,MEINS
E2E24.fieldFixedLengths 7,29,10,4,3
E2E24.endSeparator 'nl'
E2E24.processFieldNames fromConfiguration
KEY01,KEY02 i had 2 field added in DataType to identify :E2EEDL20,E2EEDL24.
THx

Hi,
The FCC u have provided..
RecordSet Structure :E2ED20,,E2E24,
RecordSet sequence :Ascending
>>Keyfield Name: KG
E2ED20.fieldNames KEY01,VBELN
>>E2ED20.keyFieldName KEY01
E2ED20.keyFieldValue 'E2EEDL20'
E2ED20.fieldFixedLengths 7,33
E2ED20.endSeparator 'nl'
E2ED20.processFieldNames fromConfiguration
U have specified the keyfield two times....
either u can remove >>E2ED20.keyFieldName KEY01 from fcc and change ut DT to have a field KG to hold the keyvalue or
u can remove >>Keyfield Name: KG so that the field specified by the field.keyFieldName is used to identify the keyfield...
Regards
Santhosh
Remember to set the thread to solved when you have received a solution

File sender with content conversion and ignoreRecordsetName

Him,
I have an scenario with a compressed file sender with content conversion.
In my sender cc i have:
1     AF_Modules/PayloadZipBean     Local Enterprise Bean     unzip
2     AF_Modules/MessageTransformBean     Local Enterprise Bean     transform
3     CallSapAdapter     Local Enterprise Bean     2
In module configuration, I have also added:
xml.ignoreRecordsetName --> true
But RecordsetName is not removed from XML
Why?
thanks, in advance
Carme

Hi,
No need to enter anything in module configuration. Just specify following Name-Value pair in the table provided on the Content Conversion tab of your file adapter.
Add a row with Name = ignoreRecordsetName and Value = true (Both case-sensitive)
For details, see [this link|http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm].
[some more here|http://www.riyaz.net/blog/index.php/2008/02/20/xipi-file-content-conversion-for-complex-structures/]
Regards,
Riyaz

Sender Adapter Content Conversion in Bytes.

This might sound crazy, but I was wondering if for the parameter:
Transform.ContentType
(I'm assuming this is the one that converts the file by using a charset)
There is an option to use bytes, or send bytes of data to the message mapping.
Or if there is any other way to send the data in bytes to the message mapping with the sender adapter.

Hi Paul,
In SP9, there is a standard module MessageTransformBean for specific conversion
routines, particularly in the JMS adapter. You can use this module in sender and receiver communication channels.
check the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/50061bd9-e56e-2910-3495-c5faa652b710
if it helpful reward points are appreciated

JMS sender adapter content conversion error

Hi,
Kindly find the error report from MONI.. and have followed this document for sender JMS content configuration
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-adapters/how%20to%20use%20the%20content%20conversion%20module%20with%20xi%203.0%20j2ee%20jms%20adapter.pdf
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_NFEIN_</SAP:P1>
<SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException:</SAP:P2>
<SAP:P3>Content is not allowed in prolog.</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_NFEIN_; com.sap.aii.utilxi.misc.api.BaseRuntimeException:Content is not allowed in prolog.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

hi folks i have resolved that issue it was mapping change...
Now i'm facing another problem .. I m gettin only header record but i don see me items...
my structure is like this field fixed length
HEADER ( 1 )
OrderDetail(Min - 1 and Max - Unbounded)
Trailer(Min - 1 and Max - Unbounded)
configuration of my JMS adapter :
Transform.Class :com.sap.aii.messaging.adapter.Conversion
Transform.ContentType :text/xml;charset=utf-8
xml.conversionType :StructPlain2XML
xml.processFieldNames :fromConfiguration
xml.documentName : MyDocument
xml.documentNamespace : http://xi.com/test
xml.recordsetStructure : Header,1,OrderDetail,,Trailer,
xml.recordsetName : Dataset
xml.Header.keyFieldName :abc
xml.Header.keyFieldValue :x1
XML xml.keyFieldType :CaseSensitiveString
xml.Header.fieldFixedLengths :1,2,3..
xml.Header.fieldNames :abc,cde,fgh...
Similarly for order and trailer
Kindly help in this regard.. i was not able to find in search

File Receiver Adapter - Content Conversion

Dear All,
We are using DB to file Scenario.We are using File Content conversion to get a File Comma Separated.
Data is picked up from the DB and our payload before getting in to File adapter is given below.
<?xml version="1.0" encoding="UTF-8" ?>
 <ns6:AssoInfo_MT xmlns:ns6="urn:NDB2File2DB">
 <AssoInfoList>
 <AssoInfoNode>
 <Name>ABCX</Name>
 <ID>31154</ID>
 <Salary>10000.0</Salary>
 </AssoInfoNode>
 <AssoInfoNode>
 <Name>ASDAS</Name>
 <ID>18978</ID>
 <Salary>10000.0</Salary>
 </AssoInfoNode>
 </AssoInfoList>
</ns6:AssoInfo_MT>
In File content conversion we are giving
 AssoInfoNode.addHeaderLine = 0
 AssoInfoNode.fieldSeparator = ,
 AssoInfoNode.endSeparator = 'nl'
We are getting output as
ABCX,ASDAS
But the expected output is
ABCX,31154,10000.0
ASDAS,18978,10000.0
What change we need to do in our File Receiver Adapter configuration.
Regards,
Vedavyas

Hello,
Test without these 2 options :
 AssoInfoNode.addHeaderLine = 0
 AssoInfoNode.endSeparator = 'nl'
I think your problem is with the "endSeparator", it is not necessary.
A new line is created for each new AssoInfoNode automaticaly.
Regards,
Chris

Sender Adapter - Content Conversion Key Field Query

Hi,
I have a flat file of the following structure I am attempting to convert to XML using a file sender adatper:
H1,H2,H3,H4
D1,D2,D3,D4,D5,D6
D1,D2,D3,D4,D5,D6
D1,D2,D3,D4,D5,D6
T1,T2,T3,T4
Within the Content Conversion tab I have a Recordset Structure of:
Header,1,Detail,*,Trailer,1
i.e one header record, multiple detail records and one trailer as per the above example.
It would seem that according to errors generated via Communication Channel Monitoring that this sort of Recordset Structure requires the Key Field Name to be set. I have searched around the forum and looked at the help.sap.com site and I'm struggling to understand what is required here.
Anyone help ?

>>It would seem that according to errors generated via Communication Channel Monitoring that this sort of Recordset Structure requires the Key Field Name to be set. I have searched around the forum and looked at the help.sap.com site and I'm struggling to understand what is required here.
Yes you need to set key field value for your Header, Detail and Trailer
Example:
Header.keyFieldValue    H1
Detail.keyFieldValue     D1
Trailer.keyFieldValue   T1

AS2 error The FILE send adapter cannot open file

I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
It works fine, but some time I get error message
The FILE send adapter cannot open file <folder name\guid.txt > for writing.
Details: The system cannot find the path specified.
I am not able to understand what is error for this? Please help me to figure-out this.

Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

File sender adapter (FTP) - processing mode "Archive"

Hello all
We're polling files from an external FTP server. For this I created a scenario on XI according to this thread:
When setting processing mode to "Archive" in the file sender adapter (ftp) it polls the file, stores it to the archive directory I specified and then tries to delete the file on the FTP server side. This returns me an error because we're not allowed to delete the retrieved files on the FTP server!
Because of this error the file adapter stops further processing and does not poll all the other files.
How can I disable this deletion mechanism while keeping processing mode to "Archive"?!?!?
We do not want to use processing mode "Delete" or "Test" and we don't see other options to influence this behaviour.
Thanks for any guideance on this one in advance!
Kind regards,
Renaud

Hi Bhavesh
Sorry for the late answer. Unfortunately I can't ask the application system to provide file names containing a timestamp within. The files are provided by an external partner and are retrieved by several others as well.
In the meantime I managed to achieve this:
In repository I created dummy data types, message types and message interfaces. No mapping programs and interface mappings!
In configuration I created the necessary communication channels (1 ftp sender, 1 file receiver) and the required receiver and interface determinations as well as the sender and receiver agreements.
The result of this is:
I'm able to poll some specific files via ftp from remote host. The file names are file1.arj, file2.arj, file3.arj and file4.arj. All 4 files have the same SourceFileTimestamp (e.g. "20060727T053900Z").
I'm able to store those 4 files 1:1 in a target directory with the same file names. Until here I did NOT need to follow this blog: <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14: The same filename from a sender to a receiver file adapter - SP14</a>.
As of this blog it is possible to access adapter specific attributes and make them available in message mapping using user defined functions. This way I'm able to get the SourceFileTimestamp from the polled files and use it in a message mapping. This way I'm also able to use it in variable substitution on file receiver adapter (syntax = "payload:root,1,fileTS,1") in order to dynamically create a directory with this syntax: YYYYMMDD.
So far so good... but the only remaining BIG problem now is, that as soon as the mapping is activated and assigned in the interface determination, the created files contain the XML payload instead of the original binary content. Where has it gone? How should the target message type look like so that it can carry over the original binary file content?
BTW: isn't it possible to post screenshots? Would be much more easier to explain things... so sorry to anyone if I wasn't clear enough!
TIA and best regards,
Renaud

XSLT mapping to retrieve FileName from FILE SENDER adapter

Hi
I have an File Sender adapter scenario where I have switched on Adapter-specific message attributes (FileName).
In my XSLT mapping program I need to RETRIEVE the filename and map it. Can anyone help please?
Thx in advance

Hi Bohamo
Refer the following link.It provides the required solution for you.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/83/2200cb50d345c793336d9a1683163e/frameset.htm
Thanks
Ram

File sender adapter:FILE to IDOC without BPM, can't see in SXMB_MONI.

Hi all
I have a FILE - XI - IDOC Async scenario without BPM.
I configured FILE sender adapter and IDOC receiver adapter. I made a mapping to transfer file data to the structure of IDOC.
Now when i am trying to load the file using command prompt, i cud see nothing in the monitoring. Whereas if i go to the communication channel monitoring of runtime workbench, i saw that CC is polling correctly and was reading the file also.
And also wen i saw in the processed folder which i mentioned in the CC configuration for the ARCHIVE DIRECTORY, i saw that file got transferred to the folder also.
I don't understand why i cant see anything in the monitoring.
Could anybody help me to rectify the problem. Is there anything i m missing ?
Regards
Naina

Rajesh/Amar
TCode:: SXMB_ADM->Integration engine configuration->specific configuration->runtime
Trace_Level = 3 then you can get all MONI PIPELINE Steps also
I did this change but cudn't see anything in SXMB_MONI.
This is how i have configured my process:
http://wiki.sdn.sap.com/wiki/display/XI/FiletoMultipleIDOCSplittingwithoutBPM
But instead of IDOC splitting i have simple FILE - XI -IDOC scenario.
I have configured everything exaclty the same way it is mentioned here. But for me the process is not visible at all.
I can't even see the first request message in the monitoring.
This is the message i can see in the communication channel monitoring:
2010-05-24 09:07:41 Success Channel CC_*: Entire file content converted to XML format
2010-05-24 09:07:41 Warning Channel CC_*: Empty document found. Proceed without sending message
2010-05-24 09:07:41 Success File "/xyz/ABC.txt" archived after processing
Is there any problem with the file and that could be the reason it cant convert the file to the request message MT_REQUEST and thus am not able to see anything in monitoring.
help me guys....this is a simple process and i m stuck...its frustrating
Regards
Naina

File Sender Adapter

Hello All...
sysinfo: files to join, file1, file2, file3 output after joining the files should be sal.txt and the executable file is run.bat
We have a File Sender Adapter and we are trying to "Run an Operating System Command Before message Processing" where we execute run.bat, if we execute it manually this executable run.bat is ok, but if we try to use it from "run operating System command before message processing" it does not work (it does not create the sal.txt file in the operating system)
we are wondering if that is because file sal.txt in the field "file name" of "file access parameters" does not exist in the operating system before the file run.bat runs.
Any clue about this?.
Regards

HI Maru,
Why don't you try to run this command from the sender directory specified in your sender file adapter in your command prompt??
Does that result in success???
And also, Instead of using a .bat fie, use the following command
COPY "C:\MyFolder\file1.txt" + "C:\MyFolder\file2.txt" +"C:\MyFolder\file3.txt" "C:\MyFolder\sal.txt"

File Sender adapter not reading the first line

Hi,
I have a scenario configured from file to jdbc adapter.
However, I found a problem in my file sender adapter. My file adpater always not picking up the first line from my text even I have set the 'Document Offset' to 0.
Any Ideas? Thanks.
Regards,
Pua

Hi Latika Sethi,
My complete input text file is as below, it contains only 2 testing records:-
H1|DIZ1 |A0016507 |10000020|09/2007
H2|ABC0001
D|P|0001|Gaji Pokok | 1,000.09
D|D|0002|Denda | 1,000.00
D|P|0003|Elaun | 1,000.00
H1|PUA1 |A0016508 |10000021|09/2007
H2|ABC0002
D|P|0001|Gaji Pokok | 2,744.09
D|D|0002|Denda | 2,000.00
D|P|0003|Elaun | 2,000.00
After the message mapping, I found the pipeline existed in sxmb_moni as below:-
<?xml version="1.0" encoding="utf-8"?>
<ns:mt_rmp03B_filejdbc_sender xmlns:ns="urn:rmp03:pdrm:ips:jdbcjdbc">
<PaySlip>
..<Header2>
.... <IC>ABC0001</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>1,000.09</Jumlah>
.. </Details>
</PaySlip>
<PaySlip>
.. <Header1>
.... <Nama>PUA1</Nama>
.... <KWSP>A0016508</KWSP>
.... <NoGaji>10000021</NoGaji>
.... <Bulan>09/2007</Bulan>
.. </Header1>
.. <Header2>
.... <IC>ABC0002</IC>
.. </Header2>
.. <Details>
.... <Jenis>P</Jenis>
.... <No>0001</No>
.... <Deskripsi>Gaji Pokok</Deskripsi>
.... <Jumlah>2,744.09</Jumlah>
.. </Details>
</Payslip>
There are 2 payslips as for the top payslip node...Header1 tag is missing. It means that during the file sender step....the first line of my record which is :-
"H1|DIZ1 |A0016507 |10000020|09/2007"
is not read into the xi pipeline. Basically this is the problem i faced.
Has somebody facing the same problem before? Currently I have no choice but moved the First line of the text into Second line and left the first line of the text become null/ empty line. As such both records can be successfully read by the XI.
However what I wondered is sometimes clients will do insert the records into the first line and this might made some data loss.
Thanks...

File Sender adapter - source file name - weird

Hi all,
We have a sender file adapter polling an ftp location. The Dynamic config has been enabled to get the source file name.
The actual file name is - "hrmd.xml", but in the dynamic configuration node, in sxmb_moni, the fileName is shown as ./hrmd.xml.
This does not occur with any other file sender adapter comm channels polling ftp locations.
I guess this has something to do with the ftp server. Did anyone face this issue?

the fileName is shown as ./hrmd.xml
The file name surely cant have a / in it....such characters are not allowed.
is there any way we can change the fileName message attribute once the file is picked up
Create a UDF for Dynamic Configuration and change the name as per your requirement (in XI)....the source file may be having proper format for name and i assume that you have to change it for receiver file name

Attachment of original message in file sender adapter content conversion

Similar Messages

Maybe you are looking for