Add 2 columns in fb60 at item level

Hi,
I have a requirement that I have to add 2 new columns in FB60 at item level.
Please suggest me, how to do that?

Hi,
I solved it by myself, referring note 174413.

Similar Messages

  • Add custom tab at line item level in transaction FMBB to view CI_FMBL flds

    Good day to all,
    We have added new fields in Budget posting (FMBB) in Line data using custom include CI_FMBL. 
    We want to display some item level fields from CI_FMBL in tab - Financial Budget
    We also want to add more item level tabs, next to tab Financial Budget and put some more item level fields from CI_FMBL there. 
    Any suggestions on how to accomplish this?  
    Thanks in advance.

    Hi,
    The customer include CI_FMBL can only be used with FMPEP and not with other transaction like FMBB.
    Technically speaking, the structure CI_FMBL must be part of many other interfaces like the one use by BAdI 'FMKU_BUDGET_EVNT'.
    In order to add such customer fields in FMPEP, you have to use the BAdI 'FMBW_CUSTOMER'. For instruction, you have to look at the note 1356725 and the instruction of paragraph 30. Please read the instruction and start to do your implementation.
    With the BAdI 'FMBW_CUSTOMER', you can use the PBO and PAI for handling the customer fields. There is no other place to populate these customer fields. Do you want to use customer fields in FMPEP? Please check note 1356725 for reference.
    I believe this answer your inquiry.
    Best Regards,
    Vanessa Barth.

  • Add new fields in fb60 at item level

    Hi,
    I added two new custom fields in structure ACGL_ITEM in the include CI_COBL and activate the structure referring note 174413.
    Now i can see those fields in FB60 .
    Now what to do next?
    Like
    where else i have to add these fields ?
    How to  incorporate these fields in the program?
    Please guide me?

    Hi Raymond,
    As per your suggestion, I added those fields in CI_COBL_BI and in control table also.
    Now i can see those fields in Field status definition.
    when i click on Field Information, it gives us following information:
    DDIC Information
    BB138 S Field contained in active version of CI_COBL
    BB138 S Field contained in active version of CI_COBL_BI
    BB138 S Field contained in active version of BSEG
    Entries in Control Tables
    BB134 S Control table TCOBM , content BPMC 133
    BB134 S Control table TCOBF , content 111BPMC X
    BB134 S Control table TMODO , content SKB1-FAUS1 1112KONT
    BB134 S Control table TMODP , content ESKB1-FAUS1 111BPMC
    BB134 S Control table TMODU , content SKB1-FAUS1 111BSEG BPMC
    BB134 S Control table GB01 , content 009SBSEG BPMC
    BB134 S Control table GB01 , content 001SCOBL BPMC
    BB134 S Control table TMODO , content T156B-FAUSW1112KONT
    BB134 S Control table TMODP , content ET156B-FAUSW111BPMC
    BB134 S Control table T162X , content 600E2111BPMC
    BB135 S Control tables have been completely maintained
    Customizing Entries
    BB110 S Field is used in field status variant 0001 group CH67
    BB110 S Field is used in field status variant 0001 group G001
    BB110 S Field is used in field status variant 0001 group ICCF
    BB110 S Field is used in field status variant 1000 group CH67
    BB110 S Field is used in field status variant 1000 group G001
    BB110 S Field is used in field status variant 1000 group ICCF
    Now, i have to add those  fields to dynpros with OXK1, i will my functional person to do that.
    But i have a question, My custom fields become disable at the time of entry.
    How to solve this issue?
    Regards
    Neeraj

  • Add field VBUP-BESTA to item level of VA03

    Hi All,
    I want to show the field VBUP-BESTA (Confirmation Status of Document Item) to the item overview screen detail level.
    I cannot found it in the detail line configuration, is it necessary to do some Screen Exit or else?
    Please help and tell me the t-code.
    Thanks.
    Terry

    Hi balajia,
    Sorry that I not want these field at all,
    The whole story is:
    The user create SO using VA01, but the ATP check lock the Material number and other user can create SO with same Material, but cannot do the ATP. Therefore the confirmation qty is ZERO, and the status of confirmation is "A".
    The user will not check the warning in VA01 and also VL01n when they create the DN.
    The user cannot see how many lines of item cannot be copied from the SO unless they check the log.
    But the lazy guys will not check and just press save to complete it.
    and the complaint from the Customer come when they receive the billing when some item missing in the Invoice...compare with the SO items they request.
    Therefore, I need to add a checking in the VL01n, prompt the error message and prevent the user from saving the DN.
    Once they see the error message, they need to know how many items the DN missing....
    Therefore, I want to add a Confirmation status field in the item detail level which they can check easily
    (although they can check line by line in the Schedule tab page)
    Can somebody help me?
    Thanks.
    Terry

  • How to add Pricing Agreement in Value Contract Item level

    Hi Exports,
                In my requirement i need to Add Product category ID at item level in  a Sales Contract. we done with this through CRM_ORDER_MAINTAIN
                we are able to add this
    For This Item we need to add Pricing Agreement  as Below ( Added at in UI level but we need  this through CRM_ORDER_MAINTAIN ) we tried through  PRICE_AGREEMENTS_CRM and  PRIDOC but its not working. We observers Pricing Agreement details  In CRM_ORDER_READ at
    PRICE_AGREEMENTS_CRM and  PRIDOC. we debug the Transaction but  didn't find any clue.  Can any once please help me to how to Proceed.
    Can we add only pricing through BOL, because we are creating sales order and item through  CRM_ORDER_MAINTAIN and ORDER_SAVE, We don't want disturb this.
    Thanks,
    Sateesh U

    What are you exactly asking for, I don't understand your question...
    Transaction screen, adding a tab / customer fields
    Business Object / BAPI, modifying BAPI signature, extension
    NB : The quality of an answer depends significantly on the quality of the question ...
    Regards,
    Raymond

  • Add fields in "customer fields" at item level

    Hi experts.
    Please i need a help.
    Im using the SAP CRM 5.0 win client.
    I will use the EEWB method to add new fields at the item level (CRMD_CUSTOMER_I). I believe that these fields will appear in the "customer fields" tab, but this tab isnu2019t displayed inside item details.
    Why its can be happen?
    Is some config. missed?
    Thanks in advanced.
    Daniel

    Hi Ratish
    First i wanna thank you for the reponse.
    In fact i didnt execute the EEWB yet.
    My question is, the tab "customer fields" isent displayed inside the item details so after that i run the EEWB and check "item" to add the fields, the tab "customer fields" will be displayed automatically?
    Thanks so much, i have added to you some points.
    regards.

  • Add New Tab Customization on SC Item Level - SRM7

    Hi gurus,
    I have requirement to add new tab on SC Item level. Which should show data from LongText of SC. New TextID created for this development. (Since Requirement is of Vaiable number of fields per Item so cant append Strucutre simply)
    After Initial analysis I see 2 ways to achieve it.
    1. Like Standard SAP way (Similar way SAP did for standard Tabs)
    - But its really complicated at Mapper Class & PDO Layer. Any Docs ??
    2. Tab Enhancement Framework - Use of Table : /SAPSRM/C_TS_EXT
    - With this I m able to call Z component. But not able to co-relate it with SC item level.
    - How to pass Item GUID to Z component in proper way??
    -  How to link Z components data SAVE event with standard SAVE button of FPM or SC ??
    Is there any other better way ??
    Is it possible via Table Extension ?? what are steps to do it ??
    Thanks
    PK
    Edited by: pkumthek on Nov 2, 2010 4:35 PM

    Hi pkumthek,
    I do suggest you not try to add new tab on SC item level. We cost 4 people month to accomplish this little function...A better way is adding a hyper-link on item level which could navigate to a pop-up window. You can finish your logci in the pop-up window and it will cost pretty less. Just for your information.

  • Add "Customer fields" for item level

    Hi experts.
    Please i need a help.
    Im using the SAP CRM 5.0 win client.
    I will use the EEWB method to add new fields at the item level (CRMD_CUSTOMER_I). I believe that these fields will appear in the "customer fields" tab, but this tab isnu2019t displayed inside item details.
    Why its can be happen?
    Is some config. missed?
    Thanks in advanced.
    Daniel

    Yes. it is possible but you have to take care of in the back end too and how these fields comes and sit in ECC. so that you may need to map in the IDOC or XI data . so that these information must be pssed to ECC and available  and accordingly you need to change in purchase order too since all these data will be copied into purchase order too.
    for example :- if you add one field in header level /item level of contract
    and it must be coppied into Backend contract as well as your next consecutive docuemnt like Purchase order must be taken care. hope you understand now.
    Muthu

  • Custom field in VA01 at item level in Additional Data B Tab

    Hi ,
    I have a requirement to add a custom field at item level in Additional Data B tab of VA01/VA02. We have to store the data in that field in the VBAP table also have to validate the data entered in the field when user hit save.
    Can any body tell me step by step procedure to do that.
    Appreciate your response.
    Thanks,
    Rohit

    Add append structure  ZAVBAP  in table VBAP in Tcode: SE11.
    In this structure include the new fields to be added to the screen.
    Then in Tcode : SE80
    take program: SAPMV45A
    take screen 8459  and add the new field.
    Also add the validation in the flow logic.

  • Adding View/tab TO service Order Item Level

    Hi All,
    I am using CRM 5.0 SP3. I need to add a new View/Tab on SERVICE ORDER at Item Level Details.
    This view consist of Some Custom Field (like IO Box, Drop down etc.)
    I have created the view but not able to understand how to add this view to the Item level details. I gone through the Cookbook, but not getting a clear idea of how to add this custom view there.
    I want to add this view like there are other view at Item level Details For Example "SLA Info","Notes" & "Partners", "Z view" (This Should be my custom view).
    Any hint will be very help full.
    Abhinav

    I assign the New z view into the viewset (ServViewSets.xml) and define the navigation link( in ServNavigationalLinks.xml as well. but when i am clicking on the link from the ServSLA, i am getting following errors.
    An exception occurred during the activation of target view ZServEvnt1 for the navigation
    An exception has occurred
    Exception Class CX_BSP_INV_PAGE
    Text: BSP Exception: Das Objekt ZServEvnt1.do in der URL/sap(bc/bsp/sap/crm_ic/ServItemViewSet.do ist nicht gültig.
    Program: CL_BSP_PAGE_BASE==============CP
    Include: CL_BSP_PAGE_BASE==============CM01A
    Source Text Row: 117
    An exception occurred in inbound plug IP_DEFAULT of target view ZServEvnt1
    An exception has occurred
    Exception Class CX_SY_REF_IS_INITIAL
    Text: Dereferencing of the NULL reference
    Program: CL_BSP_WD_WINDOW==============CP
    Include: CL_BSP_WD_WINDOW==============CM004
    Source Text Row: 47
    any help
    abhi
    Edited by: abhi on Sep 4, 2008 8:56 AM

  • Additional tab item level on MIGO supresses the excise tab at item level

    Hello Experts,
    I have used MB_MIGO_BADI to add an additional tab at item level.It is working properly.
    But now Iam facing a problem the additional tab supresses the excise tab that comes up dynamically at the item level,.
    Now how do i reslove this problem.
    Since excise details are entered later and the tab comes up dynamically my tab should not supress the excise tab at item level
    it should come after the excise tab.
    Now do I set this.
    Please help . highly appreciated. 
    Regards,
    Ranjith N

    Hi Balu,
    Thanks for your reply.
    I dint get you what you have explained.
    Hope you are clear with my problem.
    I have created a subscreen 'ZMIGOITEM' with screen number '9000'.
    In the PBO of BADI MB_MIGO_BADI I have displayed this subscreen.
    This is getting displayed at item level when I call Tcode 'MIGO'.
    After fillin up the details for performing GR..and when I check it it gives me a warning to fill in the excise details when I fill in the excise details at header level and check as per the standards an excise tab at item level should come up right ?
    Since i have added a additional tab the excise tab doesn't come up....the additional tab supress it ...
    Regards,
    Ranjith Nambiar

  • Item level tabstrip to me51n and me54n

    Hi,
       I need to add a tab strip at item level for tcode ME51N and ME54N.
       This tab will contain 1 field which will show stock info
       Kindly let me know if there is any badi existing for the same along with the procedure.
    Thanks in advance
    Ajay

    Hi,
    please find some BADIs for ME51n transactions.
    ME_PROCESS_PO
    ME_PROCESS_PO_CUST
    ME_PROCESS_REQ
    ME_PROCESS_REQ_CUST
    ME_MEREQ_PARKING
    ME_REQ_HEADER_TEXT
    Thanks

  • Add new column at line item level in MIR7 transaction

    Hi All,
        I would like to know how to add new column at line item level for GL Account
       tab  in MIR7 transaction. could you please let me know how do i add new
       column in MIR7  transaction. Please let me know is there any user exit or any
       other wat to do it.
    Thanks,
    rao

    Hi,
    The customer include CI_FMBL can only be used with FMPEP and not with other transaction like FMBB.
    Technically speaking, the structure CI_FMBL must be part of many other interfaces like the one use by BAdI 'FMKU_BUDGET_EVNT'.
    In order to add such customer fields in FMPEP, you have to use the BAdI 'FMBW_CUSTOMER'. For instruction, you have to look at the note 1356725 and the instruction of paragraph 30. Please read the instruction and start to do your implementation.
    With the BAdI 'FMBW_CUSTOMER', you can use the PBO and PAI for handling the customer fields. There is no other place to populate these customer fields. Do you want to use customer fields in FMPEP? Please check note 1356725 for reference.
    I believe this answer your inquiry.
    Best Regards,
    Vanessa Barth.

  • Screen BADI for MIRO/FB60 item level field addition

    Hi,
    I need to add 'Material Group" (MATKL) field in item level similar GL Account. Material group will appear like GL account column in FB60/ MIRO screen ( GL posting).
    I want to do without modification with help screen BADI.
    Anyone, can suggest which BADI's method / User Exit can allow to add 'MATKL' field screen?
    regards,
    Rahul Mandale

    Dear Rahul,
    Please check IMG path :
    Material management>Logistic Invoice verification>incoming invoice-->Maintain item list variant.
    Or use Tcode SHD0, enter transaction Code MIRO and create  a screen variant.
    You can create your own screen variant , Untick the invisible check box for material group.
    Regards,
    w1n

  • Screen BADI at Item Level in FB60

    Hi,
    I need to add 'Material Group" (MATKL) field in item level similar GL Account. Material group will appear like GL account column in FB60 screen.
    I want to do without modification  with help screen BADI.
    Anyone, can suggest which BADI's method can allow to add 'MATKL' field screen?
    regards,
    Rahul Mandale

    Martin,
    We have following requirement,
    Material group should be visible for Non PO invocie screen where  MM user can select/input "material group". Once materila group is selected, with user exit GL account filed will be filled based on relationship maintained in custom table.
    Is it possible any way to add "MATKL' field in item level screen without modification?
    Your suggestion is highly appreciated.
    Regards,
    Rahul Mandale

Maybe you are looking for