Add a leader to an automatic right tab?

I often want a right tab at the very edge of my text boxes. I know the shortcut for this is Shift tab. BUT... I'd like it to also have a leader... the little dots that go from the text on the left to the percentage on the right. If I use the above shortcut to create the tabs, I don't seem to be able to add a leader. Is this not able to be done? Or am I just missing how to do it? Below is an example of what I'm talking about. Thanks!
julie

You can add a GREP style to your paragraph style to accomplish this. First, create a Character Style consisting only of a dotted underline.
Then add a GREP style to your paragraph style, applying the underline style to the special tab. You will have to copy the character into the dialog, and it will not show as anything, but it does work.

Similar Messages

Right tab doesn't align properly when using leading decimals (for TOC)

I have a problem. I'm using the latest version of Pages. When I create a table of contents and use the right tab with leading decimals, they don't align straight on the right side. No matter what I do, they are always off a bit.
I also have MS Word, and I can do the contents with right tab just fine with no problems.
Any ideas?
Thanks,
Bryan

Ok just found a workaround/solution.
(always happens right after I ask, for some reason).
Rescaled my project but kept the size and positions the "same and centered".
Then I replaced all my background images with bigger versions (previously I had cropped them at the right and bottom).
Now my backgrounds were all great, but all my objects were too low.
All I had to do was ctrl+A to select everything on a slide, and then change the Y value for the whole bunch to zero.
This magically placed all objects in their correct respective spots.
Hope that helps someone out!
Russ

In Design CS 5.5 --- Question about Leader Dots ("RIGHT TAB")

In Design CS 5.5 --- Question about Leader Dots ("RIGHT TAB")
http://www.youtube.com/watch?v=e4kiyByY4A0
Can anyone help???

Apply a Character style to the tab character—don't try and do it from the Paragraph style. You can stay with a period as the leader and manipulate the size and spread of the dots via the character style. So here I've applied the Leader character style to the tab or the right indent tab and changed the point size and tracking of the style to make a leader with smaller dots and more spacing:

I want to add automatic ie tab in firefox without adding manual setting,also i want to change value of extensions.ietab.filterlist without going on about:config

1)I wants to change default extensions.ietab.filterlist value to mywebsite url without going to follow many steps,whenever user will hit my site then for users browser extensions.ietab.filterlist value should be added when he will hit my site.About:config we can add manually but i don't wants to add manually ,any way to automate this process,
2)Is there any way to install activex (Ietab extension) without clicking on add in firefox,,i am asking because my site is not supported to firefox due to activex.
3)How we add admin privilages for activex in firefox.
. please help me

I got solution for this problem,
1) I have added User.js file in default profile folder of mozilla i.e
C:\Users\xpointers\AppData\Roaming\Mozilla\Firefox\Profiles\xb2fxdxi.default, I have added in user.js
user_pref("extensions.ietab2.filterlist", "/^file:\\/\\/\\/.*\\.(mht|mhtml)$/ http://*update.microsoft.com/* http://www.windowsupdate.com/* http://www.UrWebsiteUrl.com/* ");
You can add n number of url for running In IETAb or IEtab2.
User.js file overwrites prefs.js file .
2) for adding extensions automatically need to add addon, using code and need to change extensions.json file for new version of firefox ,for older version of firefox need to change in sqlite database.

What add on lets you automatically set tabs to go from one the next using the F8 key?

I am looking to use tabbed browsing and be able to automatically have tabs go from one to the next using the F 8 key
== doesn't apply ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET CLR 3.0.30618; Media Center PC 5.0; SLCC1)

Tab Mix Plus: https://addons.mozilla.org/firefox/addon/1122

How to add a new field on the right side of 'Part function' in Opportunity

HI All
I have a requirement wherein I need to add a new field for 'first name/last name' on the right side of 'Partner function' field in opportunity search criteria..
Ex:(here i'm showing overview how the search criterial screen appears in UI since i can't attach screen shot)
Partner function is sales lead firstname/lastname
It is similar to...when we select the option 'Is between' for date field then automatically one extra field will appear
on the extreme right to enter a range for the date so similary I need to add one field to the extreme right where
the user will select 'first name/lastname' using 'F4' help in addition the abvoe 'Partner function'.
Could you please let me know how can we add it??
Regards
Anil

Hi,
First try to find out if you already have that field available in your view configuration. If yes, then you just need to add that to visible/displayed fields. Other wise you'd have to extend the context nodes using AET/EEWB. After you add the fields using configuration you can move them where ever you want to place them. I believe for first name/last name F4 comes by default.
Regards
Prasenjit

How do I add a new site to my Favorites tab?

I need to add a new site to my favorites tab.

Hey scrambler1105,
It sounds like you want to add a website to the toolbar. Is that right? It's really easy and there are a few ways to accomplish this. Take a look at [https://support.mozilla.com/en-US/kb/how-do-i-use-bookmarks?s=favorites&r=2&as=s#w_working-with-your-bookmarks-in-the-library-window this article] and it should give you all the information you need.
Happy bookmarking!

Is there a way to automatically change tabs with different times set for each tab?

I found a few add-ons that will automatically change tabs based on a configurable time. But all the tabs use the same time setting. What I need is the ability to have tabs displayed for different amounts of time. Ex, Tab 1 for 30 seconds, Tab 2 for 10 seconds, Tab 3 and 4 for 5 seconds. Ideally, I will have the ability to modify these settings as the amount of tabs and the content will change a couple times a week.
Currently I'm using Tab Slideshow with each tab displayed for 15 seconds. But it sounds like Tab Rotate and Auto Toggle Tabs essentially do the same. If there is already a solution that would be great but if not is there someone available for hire to help modify one of the existing add-ons? Thank you in advance for your time.
John

Currently Firefox don't have any options like that.
You can ask the Addon developers
*http://addons.mozilla.org/

Can add the "keywording" panel in the Develop tab?

Can add the "keywording" panel in the Develop tab?
In my workflow, I rate or tag a photo only after I've made some PP adjustment. So, my workflow would flow better if the "keywording" tab resided in the Development tab as well. Is this possible? Can you add a panel from another tab?

Not just keywords. Well.. I try to salvage borderline photos first through development, and add keywords if they come out right. If not, I reject the photos without adding any keywords.
dj_paige wrote:
As CatOne2 said, you can't do this.
The Lightroom paradigm, for better or worse, is that you add keywords in the Library module.
I cannot imagine why you would need to first post-process a photo before you know what keywords to add. Can you explain why you feel this is necessary?

Google search results won't open automatically new tab in firefox 6.0.2

Clicking on google search results won't open automatically new tabs in firefox 6.0.2, although it was working until today!

Did you check the Google settings via the gear icon at the top left of the Google site to make sure that you still have selected that feature?

Add the same component in 2 different tabs

I am trying to add the same component in two different tabs in a tabbed pane. When I add it (programaticaly) the first instance disappears. Is this at all possible. I dont want to clone the component first and then add it.
Thank you

In my appllication I have a tab (call it main tab) that includes many components, like a textfield and texteditorpane that form a command line tool, a list of connected clients (names) and several other components in the same tab. Now the user, can issue a command from the command line to open any component in a new tab, for example he might want to open the clients list in a separate tab, while still having an instance of the clients list in the main tab.
Also when something is updated (for example a new name is added in the list) I want both instances to be updated at the same time (since there is actually one Jlist object there shouldn't be any additional code to do that).
So far, when i am opening a new tab holding a component from the command line (the one i made), the same component disappears from the main tab.
I ll try what was mentioned above.
Edited by: FreshPrince1 on Apr 12, 2010 6:50 AM

How to add check boxes on plant data /storage tab of MM01/02/03 transaction

Hello experts,
I want to add check boxes on plant data /storage tab of MM01/02/03 transaction.
How can we achieve this?
Thanks for your help in advance!

Hi Shriram Nimbolkar ,
Go to tranx code : MM01 /MM02 / MM03
1 ) System-->Status , here copy the program
2) Go to abap editor ,specify the program name and copy the package
3) Go to CMOD or SMOD
CMOD>Utilites-> SAP Enanchements, Here specify the package and execute it..
4) Displays multiple exists,
check the suitable exists and insert the code in particular screen...
Reg
Siva Prasad

How do I get my downloads to open automatically, right now I have to go find my download folder and click on it.

How do I get my downloads to open automatically, right now I have to find where my download folder is each time and then find the file I just downloaded. My download pop up screeen is also blank.

This should not have changed all by itself but it should be easy to change back
*See [[Applications panel - Set how Firefox handles different types of files]]
** You should be able to choose to open .pdf files with Adobe. <br />Use Menu Button {Three bar icon) -> Options {cog icon) -> |Applications|
*[[Use the Adobe Reader plugin to view or download PDF files]]
* Also see [[View PDF files in Firefox without downloading them]] Although that is not what you will be doing.

I am trying to Add In to my excel 2013 a tab on the tool bar that would allow me to make a PDF from my spread sheet

I am trying to Add In to my excel 2013 a tab on the tool bar that would allow me to make a PDF from my spread sheet
I went to add ins in the excel options ,& it shows the add in however the tab does not appear

am trying to Add In to my excel 2013 a tab on the tool bar that would allow me to make a PDF from my spread sheet
I went to add ins in the excel options ,& it shows the add in however the tab does not appear

Add buttons to html, css, js, cf tabs

Is there a way of controlling which "quick" buttons ( or whatever they're called ) are displayed on the little tabs just above the text editing area. For example, the cfml tab has a button for cf comments, but the html tab does not for html comments. There are several I would like to add to both cfml and the html tab list but cannot figure out where to go to add them, let alone know what they're called.
Thanks,
Doug

Muse will show the contents which are added to assets , so in order to show the files , we will need to add them to our site or in any page of the site.
If you have used external links and the files are hosted with live site, then using the library will pull up the data from external and will show up on page so we don't have to manually add anything here.
We can add files to Library but on export as xml and opening on another machine with Muse will not show up the files as site does not includes those assets.
So as you are using external links , they will work fine without adding any data manually or you can create a page and upload all the assets which are used in file on that page , then user can download the assets from page link and then use in .mulib file in Muse.
I hope it clears the doubt
Thanks,
Sanjit

Add a leader to an automatic right tab?

Similar Messages

Maybe you are looking for