Can add the "keywording" panel in the Develop tab?

Can add the "keywording" panel in the Develop tab?
In my workflow, I rate or tag a photo only after I've made some PP adjustment. So, my workflow would flow better if the "keywording" tab resided in the Development tab as well. Is this possible? Can you add a panel from another tab?

Not just keywords. Well.. I try to salvage borderline photos first through development, and add keywords if they come out right. If not, I reject the photos without adding any keywords.
dj_paige wrote:
As CatOne2 said, you can't do this.
The Lightroom paradigm, for better or worse, is that you add keywords in the Library module.
I cannot imagine why you would need to first post-process a photo before you know what keywords to add. Can you explain why you feel this is necessary?

Similar Messages

  • How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

    In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
    Thank you.
    Solved!
    Go to Solution.
    Attachments:
    Doc2.docx ‏554 KB

    Hopefully I can explain it well enough. It really is simple.
    1) Create an empty global variable and call it something like User Interface References.vi
    2) For each and every control and indicator on your front panel, right-click and select Create/Reference
    3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
    4) For each of the references, right-click and select Create/Indicator
    5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
    6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
    All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
    Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
    You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
    Hopefully this all makes sense. If not, let me know.

  • How do I add a new panel to the accordion widget in-between two others (NOT at the end)

    In the accordion widget, the + button at the bottom adds a new panel to the end. I have a series of panels that are in alpha-sort and need to add a new panel in the middle... I can't figure out how to do it without re-doing the whole thing. is there a way to do this?

    Gah! Thanks Mac.
    That was the first thing I tried! I must not have had the right level selected. It's been driving me batty, but I've got it now.

  • I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imp

    I would like to create the a swatch, add it to the library and import to the swatch panel.  The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have.  I have created a library folder, imported the colour swatch as just 4 colours as a mulib file.  I drag the four colours on to the muse page in design view but that is as far as I get.  Can anyone help?  Thanks

    I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
    everyone allow read, write
    Details in the manpage for chmod. The actual steps are left as an exercise.

  • Filter by selecting keywords from the keyword panel, AND-rule

    Hello,
    I'd like to have an option to use the AND-rule when selecting multiple keywords from the keyword panel.
    For example, if I had the following keyword hierarchy:
    - Places
    - London
    - New York
    - Subjects
    - Car
    - Buildings
    Now, if I'd like to see cars photographed in New York, I need to go to the find panel and enter the keywords there. If I select multiple keywords from the keyword pane (ctrl-click keywrods "New York" and "Car"), I get all photos from New York and all photos of cars. What I'd like to have is a switch (check box) in the preferences-dialog (*) to chance this behavior to use the AND rule, so that selecting multiple keywords from the keyword panel would result into showing only those photos that have ALL of the keywords, instead ANY of them as it is now.
    (*): or perhaps even in the keyword panel as a sort of small icon, like the "add keyword" (plus sign) and "remove keyword" (minus sign) icons.

    I would love to see a better solution for keyword matching too. Imagine if we could have the power of regular expressions!
    At least we could use parenthesis (for grouping), ampersands (&) for "and", and plus (+) for "or." Wildcards would be nice too, and while we're at it, exclamation mark (!) for "not." Consider the following construct.
    ((dave & aileen) + (bonnie & steve)) & !pete
    Reads like this:
    Both dave and aileen, or both bonnie and steve, but in either case, not pete.
    Or you could change it like this:
    ((dave + aileen) & ! pete) + (shannon & dane)
    Reads like this: Either dave or aileen but not pete, or shannon and dane.
    For even greater power, allow us to store and edit frequent search terms. Then I could easily come up with some elaborate search term, and re-use it later, or change it in some small way for later.
    It would be even better if all this were part of a total metadata search. How about:
    (keyword:dave + keyword:aileen) & (year:2008 & location:US|California|Los Angeles|Home)
    Maybe this is getting to be too complex for casual use, but it really could be quite powerful for searching those catalogs of 10000+ pictures.

  • Where is the folders panel in the develope module

    I just updated Lightroom to version 3.4 and now I can not find the folders panel in the Develop module. It's in the Library module but not in the Develop module. There is not even a right click option for a folders panel under the Develop module.
    What happened???

    Folders can be part of the develop module panel:
    http://www.robcole.com/Rob/ProductsAndServices/FolderCollectionsLrPlugin

  • How can I display the front panel of the dinamically loaded VI on the cliente computer, the VI dinamically loaded contains files, I want to see the files that the server machine has, in the client machine

    I can successfully view and control a VI remotly. However, the remote VI dinamically loads another VI, this VI loaded dinamically is a VI that allows open others VIs, I want to see the files that contains the server machine, in the client machine, but the front panel of the dinamic VI appears only on the server and not on the client, How can I display the fron panel with the files of the server machine of the dinamically loaded VI on the client computer?
    Attachments:
    micliente.llb ‏183 KB
    miservidor.llb ‏186 KB
    rdsubvis.llb ‏214 KB

    I down loaded your files but could use some instructions on what needs run.
    It seems that you are so close yet so far. You need to get the data on the server machine over to the client. I generally do this by doing a call by reference (on the client machine) of a VI that is served by the server. THe VI that executes on the server should pass the data you want to diplay via one of its output terminals. You can simply wire from this terminal (back on the client again) to an indicator of your choosing.
    Now theorectically, I do not think that there is anything that prevents use from getting the control refnum of the actual indicator (on the server) of the indicator that has the data, and read its "Value" using a property node. I have never tried this idea but it seems t
    hat all of the parts are there. You will need to know the name of the VI that holds the data as well as the indicator's name. You will also have to serve all VI's. This is not a good idea.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • The "basic" panel in LR4 "develop" simply disappeared.  How do I get it back?

    The "basic" panel in LR4 "develop" simply disappeared. How do I get it back?

    the short cut is F8
    left panel F7
    bottom film strip F6
    top panel F5
    left and right panel "tab"
    thats on the common windows; no idea what the upper class do
    I think we have all be caught out with the disappearing panels

  • Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

    Is there a way the user can change the equation in the formular node from the front panel on the fly, dynamically?

    Sorry, I don't think so. That would be pretty cool if you could create a property node for a formula node and then enter a formula on the front panel and use it to update the formula. But you can't create a property node for a formula node and the only way of modifying the formula is by typing it into the formula node on the diagram. And you can't modify a diagram of a running VI.
    You could create a VI which is only a formula node with the maximum number of inputs and outputs you expect. Have a button on the calling VI to Edit Formula. When the button is pressed, use a VI server to display the front panel on the formula VI, display a dialog box telling the user how to display the diagram of the formula VI, then stop the calling VI. (You can't edit a sub-VI while t
    he calling VI is running). The user will then need to rerun the calling VI to use the new formula.
    You might be able to do something by calling MatLab or something like that to get an interactive formula window.

  • How can I expand the source panel on the Import dialog window (mac LR3.3)?

    Hello,
    How can I expand the source panel to the right under the Import dialog window?
    I'm unable to drag the seperation line to the right and therefor unable to view folder names when in lower hirarchy...
    thanks you
    shlomit

    Shlomit Heymann wrote:
    shouldn't there be at least a scroling bar from left to right? How am I suppose to view my sub folders names?
    To a lesser extent, the same problems exists on all panels, whether they be in import window or elsewhere. Just look at the Folder panel in Library to see how much space is wasted in offsetting the subfolders. When this was pointed out to the relevant folk the reply came back that it was by design. Bad design, but we're pi...g into a head wind trying to get it changed.

  • HT5055 Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works 

    Just updated to lion and my cctv access has stopped functioning all I get is a white screen in the middle of the control panel where the camera shots should be.  I think it is caused by JAVA but am confused as when i view on snow leopard it works  can you help

    Open "Java Preferences" either from spotlight or your utilities folder...it's probably going to say you need to install a java runtime. Then just click install!

  • I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

    I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
    I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

    I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen.  The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
    Reset Preferences
    Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
    Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

  • How do I safely get the side panels of the printer off

    How do I safely get the side panels off the printer. I am attempting a repair and do not want to break them

    The thin strip is called the encoder strip.  It has very fine lines that are used to keep track of where the carriage is as it moves across the paper.  You should not need to remove the sides to replace this, but it can be a bit tricky.  The post here may help.  Be sure the encoder strip is properly threaded through the sensor at the back of the carriage.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • I upgrade from LR3 to LR5 and the basic panel is the old format...does not have the new sliders that

    and the basic panel is the old format...does not have the new sliders that were introduced in LR 4. Using Windows 7 if that matters.
    still seeing fill light and recovery instead of shadows and highlights
    thanks
    jp

    You have to change the photo to Process Version 2012.
    Under the histogram in the develop module is a Lightning Bolt icon. Click on it.

  • Tell me how to make Ctrl-B open the bookmarks panel on the left side and NOT open Bing.

    For years the Bookmarks panel on the left side would open when I press Ctrl-B. Now it opens Bing. How can I fix this?

    Does the sidebar open correctly if you use View > Sidebar?
    *Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
    There aren't any extensions listed in the System Details List that could cause this, so I'm not sure why this would happen.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Are you sure that you aren't opening a specific bookmark in the sidebar?
    Opening in the sidebar is the default for bookmarks that are created via a link or button on a website.<br />
    You can check the properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Command+B on Mac).<br />
    In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the sidebar" is not selected.

Maybe you are looking for