Add addition import duty cost to materials for costing run

Hi All,
Whats the best solution to add the additional cost of import duty on materials imported into China?
Is adding an additive cost (CK74N) possible and the best solution? This way it will be picked up automatically in costing run?
Cheers
Tony

Thanks Jeyakanthan. Can you give me more details though?
Are you saying to configure the additive cost? Assign it to the materials in question and then run the costing run?

Similar Messages

Add additional field in Vendor master data for VAT Reg. No.?

Add additional field in Vendor master data for VAT Reg. No.?
Hi I need to add one additional field for other VAT Reg. number in vendor master data FK01, We currently have two field
Current Settings:
Country : LFAS-LAND1
VAT registration no.: LFAS-STCEG
I need to add one additional field for text information. Is this possible?
Thanks you very much
Luis G.

If you want to add new fields that are not possible from config (check with your consultant) you need to implement BADIs
In SPRO, go to:
>Logistics-General
->Business Partner
-->Vendors
--->Control
>Adoption of Cusomter's Own Master Data Fields
and read the documentation provided there.
You will need to implement following BAPIs
Processing Master Data Enhancements: VENDOR_ADD_DATA
Customer Subscreens: VENDOR_ADD_DATA_CS
I am not aware of any other way to add new fields to Vendor master (however, check with your consultant for config related screen modifications)
Should you need any further info to implement it, post back (read it thoroughly first, it's quite self-explanatory).
regards,
Aabhas

Transaction KSB1 - Display Actual Cost Line Items for Cost Centers

Hi,
When I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my offsetting accounts (accumulated depreciation accounts) are shown except for the ones for asset classes:
- Buildings
- PC & Small Applications
On the FI side, I can see transactions being posted to their relative accumulated depreciation accounts but I do not see this on the CO side when transaction KSB1 is executed. I have checked the config and the account assignments look correct. Also, the assets created have cost centers assigned to them.
Could you please help!
Thanks,
- Deki

Hi Murali,
I have one depreciation expense account (P/L Account) which is also a cost element.
During depreciation run, the different asset classes are supposed to hit the depreciation account above and their corresponding accumulated depreciation accounts (These are Balance Sheet Accounts and I have separate accounts for each asset class .. ie: Accumulated Depreciation for Furniture and Fixture for asset class Furniture and Fixture).
Now when I run transaction KSB1 - Display Actual Cost Line Items for Cost Centers, all my accumulated depreciation accounts are shown except for the ones for these asset classes:
- Buildings
- PC & Small Applications
Any thoughts on why the above aren't showing?
Thanks! I really appreciate your help!
- Deki

Plan cost line items for cost centers report

Hello,
I am displaying the report: Plan cost line items for cost centers and when I display the details of a line item it appears a document number, where could I display this document?
I have tried to display it in FB03 transaction but it seems not to be this kind of document.
On the other hand in the field Business transaction it appears RKP6, what is the meaning of this field?
Thank you very much

Hi Beatriz Amezua ,
For displaying plan line items for cost center - KSBP and for display of individual plan document : KABP
RKP6 means "Planning Activity Dependent Costs"
Like in FI module, the business transaction have been codified and the list you can find in KANK transaction , mention your controlling area, menu -- Groups -- Display Groups
Srikanth Munnaluri

BAPI to get cost line items for Cost Centers

Hi,
does anybody know a BAPI to get
cost line items for Cost Centers
or other Cost Center data?
e.g. actual, plan, commitments
I'm thankful for help.

hi,
check this BAPI <b>BAPI_COSTCENTER_GETDETAIL1</b>
regards
vijay

Add. Excise duty not picking up for capital items - Country India version

Hi
While capturing duty using T.code J1IEX for Imported capital items Additional Excise duty is not getting captured properly. 50% should have been captured fot the current year and the balance carried forward to the next year.
Help reqd.

Hi,
Have u defined AT2 in Specify Excise Accounts per Excise Transaction and CENVAT on hold under CAPE transaction type. Have u defined G/L account for these under Specify G/L Accounts per Excise Transaction.
whether material in question has been defined as Asset type in J1ID. check all these configuration.
Regards,
Venkatesh

MIRO Cost Element error for Cost center

Hi,
When i am doing MIRO - there are some price variances. System is giving the error to maintain the Cost center for that price differance cost element.
But i have already maintain the Cost center for that Cost element in OKB9 Transaction. Why the system is asking for Cost center assignment again?
Kindly help me
Thanks
Sunil

Hi Sunil,
Maintain the OKB9 settings with valuation area mandatory and dont give business area in the sub-sequent screen. Maintain only Valuation area and Cost center. It will not give any error and it will pull the cost center from OKB9.
Thanks
Kishore

Functional areas vs. cost center groups for cost of goods sales

What are the benefits of using functional areas over cost center groups when building your p&l for cost absorbtion or visa versa? Which of the two is recommended?

Hi,
1: a P&L statement does not only contain cost-center related postings, you can have different CO-objects (Internal order, WBS-Element,...)but all of them contain the functional area in its master record.
The P&L reporting structure (created via report painter) can use account groups but restricted to one functional area for porper P&L structure creation.
Best regards, Christian

Add Field to Column Set : KSB1 Actual Cost Line Itme for Cost Centers

Hi
We have an request to add VERAK_USER to the Column Set for the above report, so that users can select that field when they choose Change Layout.
Can you please advise how to do this. It seems to have something to do with View Cluster Maintenance and tables TKALV1 and TKALV2.
John

Read carefully OSS [ Note 325546 - CO line item reports: Creating a user-defined field|https://service.sap.com/sap/support/notes/325546]
Regards

How do I add additional internal hard drives to Pavilion h8-1217c running Windows 7 Home Premium

I am stymied in my effort to utilize two recently wiped and formatted Hitachi Deskstar 500 GB SATA drives I inherited from my previous HP desktop. I have installed them in my aforementioned unit, and find that the BIOS apparently accurately identifies them, but I cannot see them in Windows. Instead, in Disk Management, a disk with twice the capacity is listed, and the system does not allow me to initialize the drives, an apparent step necessary before they can be assigned a drive letter and utilized. Upon selecting to initialize, the Disk Management program of Windows presents an Virtual Disk Manager error message saying "The system cannot find the file specified," a message the specificity of which is slightly wanting. Huh? What system? Windows? The drive? Help? BTW, this particular frustration is well documented among a number of users on the internet. Why has no answer been provided yet?

Don't know what you mean about a link indicating this is an issue with the HP Pavilion h8-1217c...I posted that it is a general issue with a number of computers, many of them HP, wherein the error message I earlier cited came up. To answer your particular subsequent query, in Storage Options in my BIOS, it states that the SATA Emulation is AHCPI, not IDE...a setting I believe is appropriate in this case, since, as I had stated previously (I often find that I have stated, and clearly, previously) that the two additional drives I have installed in this box are Hitachi Deskstar 500GB SATA drives from a previous HP system. Both drives were wiped and reformatted by a local computer shop that was delighted to charge me $60 for that particular piece of heavy lifting, defending their bill by suggesting they woudl have to update the firmware as a matter of course. Upon getting the drives, they freely confessed that, of course, it was NOT necessary to upgrade firmware. I di-grease! To reiterate, both drives are recognized by the BIOS, with their appropriate ser no listed. It is in Windows 7 where the problem seems to crop up. Of course, as a Windows 7 issue, HP is supposed to support it. An earlier post in this forum...a reply to me...gave me a link to instructions on how to disengage the cage that holds the drives. I have, indicated by my posts, moved WELL beyond that point. Is anyone familiar with my issue...again, it is this...with the above stated conditions, when in Disk Management in Windows, with the drives recognized in Device Manager as one drive listed as "Volume_000," I am faced with an immediate pop up box telling me to initialize the drive, either as MBR or GPT. I chose MBR, though it matters not which I choose, since upon clicking OK, another popup box identified as "Virtual Disk Manager" tells me that "The system cannot find the file specified."
This delightful cul de sac is frequently cited on the internet, with no clear answer as to a resolution anywhere that I could find. Can someone help with this. This ought not to be so difficult, nor should HP be sending me around the bend, making ludicrous statements like "you should not be adding internal drives to your computer" or "we cannot cover this issue unless you pay a fee!" A FEE!! I just bought this system within the last three months. I have purchased several desktop and laptop systems and their accessories from this computer giant in the last 7 years! Do they give a flying-you-know-what about their customers?

Import Duty added to costing run CK40n

Hi all,
We are looking to have the system automatically add the import duty on materials imported from outside of China into China during the SAP costing run. Was lookign at using CK74 additive option to set this up in the costing run or maybe somewhere in MM-PUR?. Has any one done this before or have any information on how to set this up please?
Cheers

Hi sree-
You can use x-plant material status indicator during costing run. you can set up all the parts that are active with an indicator and use this indicator during cost run. you will find this indicator in dynamic selections.
Hope this helps...
RNarayan

Import duty process

Hi Experts,
I have come across this following scenario.
Purchase value of PVC rasin = $986
2. $1 =46.50 INR
3. Total calculated value in INR=986*46.50= 45849INR
4. Assessable value=45849*101%=46307.49
5. Total Custom duty=Assessable value 5%=46307.495%=2315.37 INR
6. Totalpurchase value of the item after calculating the 5% custom duty on Assessable value= Calculated value (Step 3) in INR5% custom duty=458492315.37=48164.37
7. CVD calculation
     (Assessable value (step4)+ Total Custom duty (step5)) * 10%
     (46307.49 + 2315.37) = 48622.86
     48622.86 * 10% = 4862.29
8.Total purchase valuewith CVD = purchase value with custom duty (step 6) + CVD value (step7) = 48164.37 + 4862.29 = 53026.66
9. Cess Calculation
     3% cess on CVD (Step 7)=4862.29*3%=145.87
10. Totalpurchase value after adding 3% cess=Total purchase value withCVD (step 8) + 3% cess=53026.66+145.87 =53172.53
11. Additional 3% Cess on CVD
     (Total Custom Duty (step 5)+ CVD (step7) +3% cess on CVD (step9))* 3%
     (2315.37 + 4862.29 + 145.87) * 3% = 219.71
12. Total purchase value with additional New CVD = (Total purchase valueafter adding 3%cess (step10) + additional 3% cess on CVD (step11)) = 53172.53+219.71=53392.24
13. Additional Import Duty
     (Assessable value (step4) +
Total custom duty (step5) +
CVD calculation (step7) +
3%cess on CVD (step9) +
Additional3%cessonCVD (step11))4%=(46307.492315.374862.29145.87219.71)4%=2154.03
14. Total purchase value after adding import Duty= (Total purchase value after adding additional new CVD (step12) + Additional import duty) = 53392.24+2154.03=55546.26
Please guide how to proceed.
Thanks in Advance

Dear Rupa, following three things can be used for any additional values with the base purchase amount. And what to use when, depends as per your client's business process , I'm writing the same as well -
1. Tax (this can be simple or complex tax codes in line items) -> this is used when the vendor's hard-copy / document contains the corresponding taxes and can be entered at the time entering the document in to your client's SAP B1.
2. Freight -> This is used for any other additional costs besides the tax. And this can be entered if the additional cost is know at the time of the document entry and the concerned document from the vendor contains the same.
3. Landed Cost -> This is used for any other additional costs, and these costs are not known at the time of document entry or the respective costs can't be shown into the concerned purchase document.
Hence best of luck for a perfect settings around this ... and if need more help of tax setup then you may refer to the following videos -
[Step 1. TaxCode Setup Steps in SAP B1 in Hindi|http://www.youtube.com/watch?v=S4P4x_6sAc0]
[Step 2: SAP B1- Simple tax formula creation tips in Hindi |http://www.youtube.com/watch?v=_OQIvSYz1xE]
[Step 3: SAP B1 Complex Tax Code creation tips in Hindi |http://www.youtube.com/watch?v=IowZK4CnFVg]

Import duty to be added to material price

Hi!
I have one specific client's requirement ( not indian client), when import goods, they have to pay import duty and VAT :
Import duty on Basic material price, VAT on Basic material price + Import duty.
I have defined one condition type for import duty and added in tax procedure and account key also assigned in order to capture the import duty in seperate GL account.
But I don't have idea how we can add this import duty to material price i.e client is asking while posting goods receipt it has to be added, of course it is not possible.
I have tried with MM pricing procedure by giving one condition for import duty and manually they can insert import duty once they knew the import duty to be paid, then they can post GR and invoice. ( of course we cannot use both MM pricing condition approach and Tax procedure condition type)
but we want to avoid manual updation of duty tax.
Can any one suggest me alternative method.
regs,
ramesh b

Hi,
Check your import duty condition type - condition type category should be B.
Regards,
Rajeswari

REG: Additional excise Duty

Dear ,
Guru's
can any body tell me how to set off the AED which is paid to the vendor while procuring material,
To the recieving plant while doing Stock Transfer , so that it will be appeared in the invoce.
pl do the needful
Thanks and Regards
Sunil;

HI
1.No excise duty/ additional excise duty will be there for import goods
2.Only Basic customs duty and additional duty will be there that to calculated through CVD condition type
This customs duties will not collected form customer through sales
In plant P.O, this duties are sumup/ added to basic material price
This way only we can make migo and capture and post the incomming invoice to miro.
Read SAP Note No. 910681.
Re: Concepts of CIN version.

Is it required to cost the materials with Price control "V" ?

Dear All,
Would like to know if we have to consider the items with Price control "V" during the cost run in CK40N..?
Since the system automatically updates the price of the item for price control "V", do we also require to update through cost run?
Please help me understand.
Best regards,
Praveen

Hi,
Materials with price control "V" is dynamically updated with value whenever there is a receipts. The system will calculate average rate by dividing total value by total stock. Hence, cost the materials for this price control is not relevant. It is recommended to have price control "V" for all externally procured materials.
Best Regards,
Madhu

Add addition import duty cost to materials for costing run

Similar Messages

Maybe you are looking for