Add Approver/ Rewiever error

Hi Gurus,
We have currently upgraded EBP 4.0 version from SP5 to SP11.
When clicking on the Add Approver button, getting pop up "No Possible Processor Found for approval task. Inform system admin" and not fetching any list of agents.
When clicking on the Add Reviewer, it is not bringing any pop up or other error/warning screen.
Please advice. Thanks in advance.
Regards,
Gopesh

Hi All,
This BADI deactivation started throwing other error message class BBP_WFL and no 038.
This problem has been resolved by changing the include LBBP_PDH_WFLF02 and function module BBP_PDH_WFL_APP_ASSIGNTYPE_GET.
Thanks everybody for your suggestions.
Regards,
Gopesh

Similar Messages

We are Not able to Add, approved A/P invoice - Error - Tax code Missing

Dear Experts,
In A/P -> A/P service Invoice
When We are going to Add Approved Invoice ,system can not allow . This
invoice is go through a approval process ,system can not allow to change any
of document row during approval process or after approval process.
we are unable to add tax or remove line item after approval.
We are Not able to Add, approved A/P invoice - Error - Tax code Missing
[A/p Invoice Row -Tax code] Line 3 [Message 3513-14]
I think ,It should allow the system to edit the row tax or amount after or during
approval process

Don't worry,AP invoice is not get posted,it will be saved as draft only,
Default tax code for purchase documents using tax code determination.
Create new ap invoice with tax code and send it for approval.
Orginator should ensure all mandatory fields in document are entered correctly before
sending it for approval.

Cannot add approver / reviewer

Hi All
We are on SRM 5.0 SRM Server 5.5.
When we try to add approver or reviewer the add approver / add review icons are greyed out for both shopping carts and PO's.
When we change the BBP_WFL_SECURITY to any level in personalisation this has no effect.
am I missing some config / other settings?
thanks
Daniel

Hi,
See if the BADI BBP_CHNG_AGNT_ALLOW is implemented in SE18.If there is any active implementation for this BADI,deactivate it.
Also see the foll notes:
Note 888560 - Not able to add approvers in table approval preview
Note 990982 - Shopping cart ad approvers possible in display mode
Note 999528 - Adding Ad Hoc Approver fails due to comit error
BR,
Disha.
Do reward points for useful answers.

Add-on Conflict error while installing add-on LOCIN release 100

Hi experts,
I want to install the add-on for India Localization for IS-Utilities i.e., LOCIN release 100. I have downloaded the add-on and also the CRT(SAPK-10001INLOCINISU) required for the add-on.
we got an error while installing the add-on it is
"OCS package SAPK-10001INLOCINISU does not match the current software component vector"
if we remove the CRT from the queue and start the installation then it will give add-0n conflict error.
Conflicts Between Add-On LOCINISU 100 and Support Packages
Component    Release      Support Package        Information on
                                                  Conflict Resolution
FI-CA        600          SAPK-60004INFICA       Include CRT
                           SAPK-60005INFICA       Include CRT
                           SAPK-60006INFICA       Include CRT
                           SAPK-60007INFICA       Include CRT
                           SAPK-60008INFICA       Include CRT
                           SAPK-60009INFICA       Include CRT
                           SAPK-60010INFICA       Include CRT
Plz tell the solution for this.

Hi,
I had somthng like this recently with SCMEWM....
1. Clear out your EPS/in directory
2. Download the latest version of the add-on and all the patches ===> the latest CRT's will be in the patches.
3. Unpack them and try import again.
Also if you have not seen or read:
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=950513
Mark

Add Approver button disabled for PO in sap srm when GR and IR are already posted

Hello Gurus,
One of my user has edited an old PO for which the GR and IR has already been posted in backend. Now the reason for editing was to change the expected value for 3 item and he changed the value the approver is still blank as for old PO's there was no approval required but later on the whole scenario changed and based on total value the approvers are decided now. But for this PO still its not showing the appovers and also the add approver button is disabled. Is there any way to enable the Add approver button. Also please let me know whether addition of approver is allowed after the GR and IR are posted in backend.
Thanks
Gaurav Gautam

Solved.
In Control Actions -> Configure Control of Actions on Header Level, it's not neccessary put the subtype equal to 0.

Add Approver - applet performance when 'Add here' pressed

Hi -
We have recently upgraded to SRM 5.0 (classic) and are noticing that the Add hoc approver functionality is quite slow when using the graphical view.
Steps:
- for a sc to be approved, go to Approval Preview
- click 'Add Approver'
- on any of the 'Add here' entries, press
The perofmance problem is when the 'Add here' is pressed - for the graphical view, i.e. using the applet, the performance can take 15 sec. and sometimes longer. But, if in table view, the performance is o.k. at about 5 sec.
This leads me to believe that the problem is with the applet (as opposed to for example the agent assignment causing problems, as is the same agent assignment with both ways).
Just wondering if anyone is noticing the same issue - I have found nothing in OSS nor in this forum.
Thanks,
Keith

Keith,
We are also in the process of implmenting SRM5.5/EBP5.0.
Just throwing out some ideas...since the graphical view is using a Jave applet could cause be due tp the jre version? Parhaps upgrading ot he lates jre will solve the problem.
Thanks,
PS. Where in Canada are you?

Add approver/ reviewer-data not coming up.

Hi All
One more question-we are in SRM4.0
We managed to enable the add approver and add reviewer tabs under approval.
Now when we try to add approver or reviewer the system does not fetch any data. Do we need to maintain a separate table of approvers and reviewers and link a program so that when user clicks on the tab, the data is fetched from the table....or there is some other way out.
Regards
Ashish

Ashish,
I am having a similar kind of issue like what you had months back. The 'Add approver' and 'Add reviewer' buttons are disabled on the shopping cart status overview. I have the approval task TS10008126 as general task (Not general fowarding allowed). Also the SAP provided BADI SAP_CHNG_AGNT_ALLOW is active in the system. But for some reason the add approver/reviewer buttons are greyed out.
How did you resolve your issue? Appreciate your help
Thanks
Sridhar Jami

SRM 7.0 'Add Approver' button disabled after rejection

Hi Experts,
I'm working on SRM 7.0(BRF) RFx workflow. I have configured the process level schema and the acceptance by contact person in customizing. When any of the approver rejects the document, it comes back to the creator which is right. But i see the 'Add Approver' button as disabled. But while creating a new document it is showing the 'Add Approver' button, only after rejection, the creator is seeing the button as disabled. Is it the standard behaviour in SRM7.0 ?
Can you guys share your thoughts on this..
Thanks
Ram

Hi,
Please check the note 1378094.
https://service.sap.com/sap/support/notes/1378094
Regards,
Masa

Add approver when the SC is in Awaiting approval

Hi SDN,
we are using SRM 5.5 system.
When the SC is created the in the BADI - BBP_WFL_APPROV_BADI we are finding the manger of the user and sending workflow to that mangaer.
Up to this eery thing is working fine.
But when the SC creater wants to chnage the Approver name in Approver Preview (Add approver) when the SC is in Awaiting approval.
System is allowing us to add APprover here but when i Save the SC system calling the BADI BBP_WFL_APPROV_BADI and over righting that manger name with the original manger not with added manger.
Please let me know.
Thanks
Naresh

Once i selected the add approver i can't see this value or capture in any badi.
Can any one know where can i get the added approver details before saving the shopping cart
that mean at run time.

Add approve data column in sp

i want to add approve date from approval table i tried but it not works
sp
ALTER procedure [dbo].[spdocuments]
as
SELECT dbo.DocumentInfo.DocID as DocumentID,
dbo.DocumentInfo.DocName as DocumentName,
dbo.DocumentInfo.UploadedDate as UploadedDate ,
dbo.DocumentInfo.Uploadfile as FileUploaded,
dbo.DocumentInfo.UploadedBy as UploadedBy,
dbo.Department.DepType as Department,
dbo.Approval.ApproveDate,
dbo.ApproveType.ApproveType as Status
FROM dbo.DocumentInfo inner JOIN
dbo.ApproveType ON dbo.DocumentInfo.ApproveID = dbo.ApproveType.ApproveID inner JOIN
dbo.Department ON dbo.DocumentInfo.DepID = dbo.Department.DepID left join
dbo.Approval on dbo.Approval.ApproveID = dbo.Approval.ApproveDate
this sp returns me approve date column null like this
DocumentID DocumentName UploadedDate FileUploaded UploadedBy Department ApproveDate Status
30 computer science 2013-12-25 18:31:26.420 dotnetcodes.docx noreen Computer Science NULL Pending
31 manual hr 2013-12-26 12:16:54.830 The Business Memo.doc kulsoom Human Resource NULL Approve
whereas in approval table and in this approvedate data exist
SeqNO DocID ApproveID AppoveBy DesigID ApproveDate
258 30 1 sundus 1 2013-12-25 18:34:47.347
259 30 1 kaneez 2 2013-12-25 18:34:47.347
260 31 1 wajihazeb 3 2013-12-26 12:17:37.150

You only got half my query. It starts with a ;.
;with maxApproval as
select approveId, max(approvalDate) as approvalDate from Approval group by approveId
SELECT di.DocID as DocumentID,
di.DocName as DocumentName,
di.UploadedDate as UploadedDate ,
di.Uploadfile as FileUploaded,
di.UploadedBy as UploadedBy,
d.DepType as Department,
coalesce(ma.ApproveDate, ''),
at.ApproveType as Status
FROM dbo.DocumentInfo di inner JOIN
dbo.ApproveType at ON di.ApproveID = at.ApproveID
inner JOIN
dbo.Department d ON di.DepID = d.DepID left
join
maxApproval ma on at.ApproveID = ma.ApproveID;
This is a CTE. You can learn about them in my article on Code Project, here:
http://www.codeproject.com/Articles/702691/SQL-Wizardry-Part-Three-Common-Table-Expressions-C
As you can see, I also aliased all your tables, which makes my SQL more concise. As I said, the aliases ( like the di. in di.DocId ) can be removed if that column name only exists in one of the tables you're selecting from.
Christian Graus

SP01 PL03: Click on Grid Link button, add-on disconnected error occured

Hi Frank,
I upgrade my add-on to SP01, there is an error when click Link button which in a UDT bound grid, the error shows 'System Message' with three option buttons, [Restart Add-on],[Log off the current company] and [Continue working without this Add-on], this error does not occur on SAP 2005 PL7,PL8, PL9 & PL10, but occurred on SP01 and SP01 PL03.
The grid Link button link to master like BP, G/L Accout and Item.
Hope there is a workaround way.
Thanks.

What version / PL was your Add-On compiled with before?
Was it done with 2005A SP00 PL?? ?
Anyway, I am happy to hear that it works now...
regards,
Frank

'Add Approver' is inactive for SRM contracts

Dear colleagues,
We have deal with SRM 5.5. The point is that the button 'Add Approver' is inactive for 'Approval Preview'.
This issue regarding SRM contracts. Does anybody know how to activate usage of "add approver" during approvement of a contract.
Many thanks in advance for your help.
Kind regards,
Grygoriy
P/S
I've had a look at notice 'ADD Approver/Reviewer buttons are disabled' by N M Poojari ( ADD Approver/Reviewer buttons are disabled), unfortunately, author didn't point to solution of his problem. So, I'll appreciate more detailed plan of actions.

Thanks, Siobhan, for your reply.
However, the problem was caused by my attempt to to do the following steps with a wrong WF (instead standart workflow for contracts (WS14000148) we use Z-flow) :
PFTC -> Select workflow template -> workflow you are using -> Display -> Additional data ->
Agent Assignment -> Maintain -> Attributes -> Select radio button
'General Task'. -> The problem is solved
Yours faithfully,
Grygoriy Gavrylyuk

ADD APPROVER button to be disabled!

Hi All,
I have implemented the n-level approval WF WS14000133 through the BADI BBP_WFL_APPROV_BADI.
Can anyone tell me whether it is possible thorugh disable the "ADD APPROVER" and "ADD REVIEWER" button on the approval preview screen???
Regards,
Disha.

Hi Disha,
you can use BADI BBP_CHNG_AGNT_ALLOW to determine whether users can add approvers and reveiwers.
There is a sample implementation for this BADI that can be copied and an example in the documentation for this BADI.
Regards
Chris

Add Approver button disabled in SRM Shopping cart

Hello,
We have activated 2 level PC workflow. However we are facing issue that Add Approver button is not enabled.
Could anyone please advise.
Thank you
Ritesh

Hi Ritesh,
On the face of it,I have couple of points for you to check it out.
1.
Please check the agent assignment at the header level of the workflow.
Go to transaction PFTC -> Select workflow template -> 14000133 (or
whichever workflow you are using) -> Display -> Additional data ->
Agent Assignment -> Maintain -> Attributes -> Select radio button
'General Task' .. or instead of everybody being able to make changes
you can set the agent assignment of the workflow at role level.
Please also review note 581191.
2.Check if this button is not visible or not for all the roles.
3.Check any portal enhancements or Metadata config to make it display.
Thanks
Balaji

Shopping Cart Add Approver option

Hi all,
We have a requirement wherein after creating a shopping cart we can add approver by using the "Add Approver" button on the top, i just want to know what is the backend function module or BADI called while adding the approver manually.
In our case the creator can add his name as approver but this should be prevented, can any one guide me how to do this......
Its very urgent and every one is highly appreciated..........
Regards,
Ravi G

Hi
Which SRM version are you using ?
If you use WS14000133 as an alternative, you can determine the list of approvers flexibly according to your particular requirements.
You do this using the method GET_REMAING_APPROVERS of BAdI BBP_WFL_APPROV_BADI, with which you can integrate a logic for determining the approvers for each approval step (this can be more than one) and the number of steps in the entire approval process.
For more details, see the IMG:
Supplier Relationship Management ® SRM Server ® Business Add-Ins for Enterprise Buyer (BAdIs) ® SAP Business Workflow ® Determination of Approvers for n-Step Dynamic Approval Workflow
N-Step, Dynamic Approval for Spending Limits
http://help.sap.com/saphelp_srm30/helpdata/en/17/40a86c773d6c41801d78af1a34b90f/content.htm
Do let me know.
Regards
- Atul

Add Approver/ Rewiever error

Similar Messages

Maybe you are looking for