Add cursor in 2d table report

Hi all
The question is in the title i.e. is it possible to add cursor in the 2d table report ? A customer asked me this question, and till now i wasn't able to find a good answer. I didn't find any property to do this, and i think this could be a great funtion.
Thanks for your future answer !

Hi KaBooOoom,
Well, we're getting closer, but I'm still not convinced I really know what you want. If you want to display in a REPORT table a certain row range from the data channel values, that is NOT starting at the first value and NOT ending at the last value, then you can already accomplish this by setting the start and end row to display in the table configuration dialog under the "Scaling" tab.
If you want t do this based on vertical cursors you drag around in a VIEW graph, then this can be accomplished by copying the flagged region betwee the cursors into new data channels and linking to these new data channels in your REPORT table.
Finally, if you see what you want already in VIEW, you can transfer the VIEW layout into a new REPORT layout with the "Transfer to REPORT" icon at the top of the VIEW panel.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Similar Messages

Data Modeler : Modifying the Table Report layout

Hi ,
I'm using SQL Data Modeler (DM) 4.0 EA .
I used the File -> reports option to generate the reports on Table and in the report
1) I couldn't see the column data type ? (Refer below table ) , Is there any options to bring on the Data Type in the Report ?
No
Column Name
PK
FK
M
Data Type
DT
kind
Domain Name
Formula
(Default Value)
Security
Abbreviation
1
ID1
P
Y
(10)
LT
2
ID2
F
Y
(10)
LT
3
ID3
Y
(1)
LT
4
ID4
Y
(10)
LT
5
ID5
F
(20,4)
LT
2) In options to manage the Table report (Reports -> Manage). Currently I can only remove a heading (like Descriptions Notes ,columns,column comments.). Is there is any way to customize the report in such a way that I can remove some columns (mostly the empty ones) from the report and add the column comments along with the column table than a new column comments table.
Please let me know ,is there is an option to customize the report .
Note: I even tried generating the report using the search then report , but it doesn't give a complete report (i was only able to generate a report on column or table name or constraints , not all together.)
Thanks,
Srinivasan.K

Thanks for the immediate reply.
I checked on the DM again, the report comes good for the one which has the data type . But now all my data type changed to UNKNOWN and lokks like ,due to this my table report is coming without the "Data Type".
Can you please help me in fixing this unknown data type issue ?
Table report for the ones with proper Data type:
Columns
No
Column Name
PK
FK
M
Data Type
DT
kind
Domain Name
Formula
(Default Value)
Security
Abbreviation
1
ID1
Y
NUMERIC (10)
LT
2
SCRIPT
Y
VARCHAR (1024)
LT
3
UPGRADE_S
Y
VARCHAR (10)
LT
4
UPGRADE_D
Y
VARCHAR (250)
LT
5
UPGRADING_F
Y
VARCHAR (20)
LT
6
TIMESTAMP2
Y
Timestamp
LT

Add fields in KOB2 & KSB2 report in selection screen as well as output

Dear All,
I have an issue in which i have to add fields in KOB2 & KSB2 report.
i need to add below fields to KSB2 report.
1) Internal order
2) Vendor
3) Purchasing group
I also need to add profit centre in selection screen for KSB2
Similarly for KOB2 i need to add below fields
1) Cost centre
2) Vendor
3) Purchasing group
I also need to add cost centre as input for KOB2 report.
I have gone through note 325546 "CO line item reports: Creating a user-defined field" which can be helpful.
However i am not sure as to how do i add fields in input screen as required.
Other alternative is to create a Z report however when i try and copy the report both KOB2 & KSB2 call same report "RKAEP000".
I am not able to get as to how do i differentiate the call of different screens when ZKOB2 is called or when ZKSB2 is called.
I could identify " c_item_group" field having different values however i couldnot get a proper logic as to how correct screen can be called based on input
Please suggest .
Thanks,
Ronak

Hi Raymond,
The note 747588 is good as soon as you are adding fields from the same table only.
When I have added additional table into KAEP_SCOVP selection view below COVP (just because the extra fields I need are not in COVP) they will show up in KOB1 as selection criteria, but not getting saved.
Any idea if any ABAP should be regenerated or what extra steps are required when adding more tables into Selection View?
Thank you!

Can't insert recors fetched by cursor in the table

HI
i am fetching records from my table total_budget.All the fetched records are displayed in a tabular data block(data block name is forecast_result).Now i want to insert these record fetched by cursor in my table forecast_resul which is empty.how can i do it.I am sending the code if any one can help............
When i execute this code it give me error unable to insert(FRM-40508) .I have carefully checked table columns names and their data types.All r fine but i dont know y it is not working.Here is the code
DECLARE
cursor c1 IS
SELECT ministry_id,fiscal_year ,t_amount
FROM total_budget
WHERE ministry_id=:global.var11 AND (fiscal_year BETWEEN :syear and :eyear);
BEGIN
T_XSUMX := 0;
     OPEN C1;
     X:=1;
     SUMX := 0; SUMY := 0; SUMXY:=0; SUMX2 := 0;
     go_block('forecast_result');
     first_record;
     LOOP
          FETCH C1 INTO Y1,Y2,Y;
          EXIT WHEN C1%NOTFOUND;
          SUMY := SUMY +Y;
          XY := X*Y;
          X2 := X*X;
          SUMX := SUMX + X;
SUMXY := SUMXY + XY;
          SUMX2 := SUMX2 + X2;
               :forecast_result.ministry_id:=Y1;
               :forecast_result.fiscal_year:=Y2;
          :forecast_result.t_amount:=Y;
     NEXT_RECORD;
          X := X + 1;
     END LOOP;
     close C1;
z:=X-2;
     X_BAR := z;
     X := z+1;
     T_XSUMX := X * SUMX;
     T_SUMY := SUMY * SUMX;
     T_SUMX := SUMX * SUMX;
     T_SUMXY := SUMXY * X;
     T_SUMX2 := SUMX2 * X;
     R1 := T_SUMY - T_SUMXY;
     R2 := T_SUMX - T_SUMX2;
     B := ROUND(R1/R2,1);
     A := ROUND((T_SUMXY -(T_SUMX2*B))/T_XSUMX,1);
     Y_BAR := A+(B*X_BAR);
:forecast_result.ministry_id:=Y1;
:forecast_result.fiscal_year:=Y2;
:forecast_result.t_amount:=Y_BAR;
next_record;
     insert into forecast_result
     values(:forecast_result.ministry_id,:forecast_result.fiscal_year,:forecast_result.t_amount);
     commit;
END;
Can anyone tell me wat i am doing wrong
looking for instant reply
nida

Hi alma,
Plz u dnt wrt babytalk rr SMS-language -> mi! Becoz mi don lejk dat.
I suppose that your data block "forecast_result" are based on the table of the same name. Otherwise this may be the cause of some of your trouble.
Your code would properly work better like this:
DECLARE
X NUMBER(38);
SUMX NUMBER(38);
SUMY NUMBER(38);
Y NUMBER(38) ;
Y1 varchar2(10);
Y2 varchar2(10);
X2 NUMBER(38);
XY NUMBER(38);
SUMXY NUMBER(38);
SUMX2 NUMBER(38);
X_BAR NUMBER(38);
Y_BAR NUMBER(38);
T_SUMY NUMBER(38);
T_SUMX NUMBER(38);
T_SUMXY NUMBER(38);
T_SUMX2 NUMBER(38);
T_XSUMX NUMBER(38);
R1 NUMBER(38);
R2 NUMBER(38);
A NUMBER(38);
z number(38);
B NUMBER(38);
final number(38);
-- Just curious, where does :syear and :eyear come from ??
cursor c1 IS
   SELECT ministry_id, fiscal_year, t_amount
    FROM total_budget
   WHERE ministry_id=:global.var11
     AND (fiscal_year BETWEEN :syear and :eyear);
BEGIN
T_XSUMX := 0;
X:=1;
SUMX := 0;
SUMY := 0;
SUMXY:=0;
SUMX2 := 0;
go_block('forecast_result');
-- If you're making this dynamically, then clear the block to start with.
clear_block(NO_COMMIT);
first_record;
OPEN C1;
LOOP
    FETCH C1 INTO Y1, Y2, Y;
    EXIT WHEN C1%NOTFOUND;
    SUMY := SUMY + Y;
    XY := X*Y;
    X2 := X*X;
    SUMX := SUMX + X;
    SUMXY := SUMXY + XY;
    SUMX2 := SUMX2 + X2;
    :forecast_result.ministry_id := Y1;
    :forecast_result.fiscal_year := Y2;
    :forecast_result.t_amount := Y;
    -- NO, this will not work. You have to CREATE the record. You only get the
    -- first record for "free". Next_Record moves to allready existing records.
    -- NEXT_RECORD;
    Create_Record;
    X := X + 1;
END LOOP;
close C1;
z := X - 2;
X_BAR := z;
X := z + 1;
T_XSUMX := X * SUMX;
T_SUMY := SUMY * SUMX;
T_SUMX := SUMX * SUMX;
T_SUMXY := SUMXY * X;
T_SUMX2 := SUMX2 * X;
R1 := T_SUMY - T_SUMXY;
R2 := T_SUMX - T_SUMX2;
B := ROUND(R1/R2,1);
A := ROUND((T_SUMXY -(T_SUMX2*B))/T_XSUMX,1);
Y_BAR := A+(B*X_BAR);
-- What are you doing here ?? This is weird. The population of the records are done in
-- the loop ! You don't have to add anything here.
-- :forecast_result.ministry_id:=Y1;
-- :forecast_result.fiscal_year:=Y2;
-- :forecast_result.t_amount:=Y_BAR;
-- Since your data block (hopefully) are based on the table of the same name, you DON'T
-- need to do this. You just have to press the commit button (or F10 or the floppy disk
-- icon or what-ever).
-- insert into forecast_result
-- values(:forecast_result.ministry_id,:forecast_result.fiscal_year,:forecast_result.t_amount);
-- commit;
END;

How we add & grandtotal of sales order report in alv

hi guru how we add & grandtotal of sales order report in alv
regards
subhasis

hi subhasis,
since u want the grand total in ALV use the following code...
clear gs_fieldcat.
gs_fieldcat-fieldname = field.
gs_fieldcat-tabname = DB table
gs_fieldcat-seltext_m = text.
gs_fieldcat-do_sum = 'X'
gs_fieldcat-datatype = data type (Curr or Quant)
gs_fieldcat-ref_fieldname = reference field name
gs_fieldcat-ref_tabname = reference table name
append gs_fieldcat to gt_fieldcat.
hope this will work...
please reward points in case usefull
regards,
prashant

Is there a way to add rows to a table in a fillable PDF?

I have created a fillable form, but the table I've created only has 9 rows. I'd like to be able to expand the rows on demand. If they're needed, then the user could add rows to the table as needed. It's an expense form, so the rows need to be there when there are multiple expenses, but not there when there are only a few expenses. Any/all help is appreciated. Thanks!

here's more background infomation... I have some audits setup on my database for one of my users. Every quarter I have an automated job that runs that creates a usage/statics report for this person using data in aud$. at the end of the job I export the aud$ table and truncate it. However last quarter I found that there was a mistake in my report and my export did not run properly thus my audit data was gone. i also have full datapump exports that run daily but found that aud$ was not there. so that is why I thought I'd like to include sys.aud$ in the full datapump exports.
i understand why other sys tables would be left out of a full export but aud$ data cannot be reproduced so to me it makes sense to include it in a full export.
don't worry, we run our true backups using rman which is eventually how I got the aud$ data back by creating a copy of my database up until the time of the truncate. however this was quite time consuming.

To add "Transaction type" in depreciation report (S_ALR_87012026)

Hi SAP Experts,
I have a request from a user to add selection option of "Transaction Type" in the Depreciation Report.Is this possible to be done by adding in Dynamic Selection?If yes, how?
Refer to SAP Note 439407,it seem like it only cater for structure ANLAV only but not for for ANEPV - BWASL.
Please advise since im trying to avoid copying the standard program.
Regards,

Hi,
Yes, user-defined fields added as per SAP note 335065 are shown in the report output.
Alternatively, you can also create a sort version. However, check the restrictions for both options as outlined in this note.
Though still, you cannot add the transaction type as a field as the note is pointing out the tables from which fields can be extracted from: ANLAV/ANLB/ANLV only.
CI_ANLU is about user defiened fields in master data and so you cannot add BWASL in this table as this field has nothing to do with master data.
Just on the side a small comment: not sure of what benefit it would be to see the transaction type in a report such as RAHAFA_ALV01 as this report is mainly about all sort of information regarding all types of depreciation values.
I hope this helps further.
Kind regards,
Brigitte

How to add index to PSA table?

Hi , Experts
as title, I want to add index to PSA table.
my scenario is as below:
We have already initialized 2LIS_03_BF with NOT blcok business user(it's due to our company could not stop R/3 system, anyway), so there are 6 years data in the PSA table, it's very huge records in PSA more than 48 million records, because of we NOT stop R/3 business during initialization, so I have to search some common data between delta records and full records(it's due to this common data contain duplicate record, I need find them and delete the duplicate record and make sure the data is correct).
This is mean The selection is too expensive as it has to look for more than five thousand delta record between more than 48 million full records. fow now I have already tigger this search job use a program, but it's still run for 7 days, still not finished yet, it drive me crazy. so I mean if I can create a index for PSA table, and this action will drive the above compare work more quickly than before? or have any other way for my scenario?
Thanks in advance.
Best Regards,
Bruce

Hi,
See the PSA Name in RSTSODS table and then in SE11 you can create Index. But the load will become slow if you don't drop the Index.
Use 2LIS_03_BX, 2LIS_03_BF, 2LIS_03_UM to 0IC_C03 Cube and design the report.
Use :See the steps how to load the data to 0IC_C03.
Treatment of historical full loads with Inventory cube
Setting up material movement/inventory with limit locking time
If it is BI 7 then for BX in in DTP in Extraction Tab you need to select Extacrion mode = NON-Cumulative option.
Thanks
Surendra Kumar Reddy Koduru

Cannot add column to flexible table when ddl autocommit is off using Procedure

Hello All,
Through procedure I am trying to insert data into the target(EX_92) table(with schema flexibility)
Source table data
ID
PRODUCT_CODE
PRODUCT_NAME
PRICE
COLOR
TYPE
1
1
rugg
101.22
2
1
rugg
101.22
3
2
book
200.32
BLUE
Y
Target table QUERY
drop table EX_P2;
CREATE COLUMN TABLE EX_P2(
ID INTEGER PRIMARY KEY,
PRODUCT_CODE VARCHAR(3),
PRODUCT_NAME NVARCHAR(20),
PRICE DECIMAL(5,2)
) WITH SCHEMA FLEXIBILITY;
Procedure to insert above records with additional columns into the target table(EX_P2)
Procedure
drop procedure "DS_O1"."PROC";
create procedure "DS_O1"."PROC"(IN max_value INTEGER, IN schema_name varchar(40), IN table_name varchar(40), IN column_list varchar(400))
LANGUAGE SQLSCRIPT AS
BEGIN
DECLARE maxid integer :=0;
DECLARE INSERT_STR VARCHAR(1000) :='';
select max(ID) into maxid from "DS_O1"."EX_P2";
select :maxid from dummy;
INSERT_STR :='insert into "' || 'DS_O1' ||'"."EX_P2" ('||:column_list||') (select ' ||:column_list||'
FROM "'||:schema_name||'"."'||:table_name||'"' || ' where ID >' || :max_value || ')';
EXECUTE immediate(:INSERT_STR);
END;
Now while executing above procedure
CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE');
I am getting the following error
Could not execute 'CALL "DS_O1"."PROC" ( 0, 'DS_O1', 'TMP_EXL2','ID,PRODUCT_CODE,PRODUCT_NAME,PRICE,COLOR,STATUS,TYPE')' in 23 ms 564 µs .
SAP DBTech JDBC: [7]: feature not supported: [7] "DS_O1"."PROC": line 18 col 1 (at pos 779): [7] (range 3): feature not supported: cannot add column to flexible table when ddl autocommit is off

Hi Rajnish,
I had the same issue. For what it’s worth I was able to do a workaround basically creating all the columns when I create the table. The following code works for me to create the table which is just a matrix with one Integer column as the key and the rest as type Double.
It is not ideal in all scenarios because the table columns cannot be added dynamically via a procedure at a later point. This table has 27K columns now
Of course one of the advantages of a flex table would be programmatically adding columns dynamically. This works, but maybe there is still a way to add columns dynamically from a procedure, and someone else can advise.
Apparently dynamically adding columns via procedures may have some "minor" limitations due to the need to compile the procedure with knowledge of the flex table DDL. But again, hopefully someone knows another solution.
Best regards,
Mark
DROP PROCEDURE CREATE_MATRIX;
CREATE PROCEDURE CREATE_MATRIX(
    LANGUAGE SQLSCRIPT
    SQL SECURITY INVOKER
    AS
/*********BEGIN PROCEDURE SCRIPT ************/
BEGIN
    -- cursor over messages
    declare cursor matrix_cursor for
        select distinct TERM
        from TERMS
        order by term;
       declare cnt INTEGER := 0;
       declare temptxt NVARCHAR(500000) := 'CREATE COLUMN TABLE DOC_MATRIX ( CONTENT_ID INTEGER ';
    for cur_matrix as matrix_cursor do
      cnt:=:cnt + 1;
           select temptxt || ', C' || cnt || ' DOUBLE' into temptxt from dummy;
    end for;
      temptxt:=temptxt || ' ) WITH SCHEMA FLEXIBILITY';
       EXEC :temptxt;
       select :temptxt from dummy;
END;
DROP TABLE DOC_MATRIX;
CALL CREATE_MATRIX();

I want to add some fields in the report of FBL5N, Can anybody tell me how ?

I want to add some fields in the report of FBL5N, Can anybody tell me how to do it?
The fields are sales order, delivery, order quantity, net value and others.
I can only find the shipment number in FI document.
Thank you very much.

Dear Jie,
Billing document number can be displayed in customer line item display
(FBL5N) and not in G/L line item display (FBL3N).
The value of VBELN is saved in table BSEG. So, this means, you
have to define the field BSEG-VBELN as a special field in table
T021S. Then you can use it in FBL3N, because then the report looks
directly in BSEG-VBELN.
For further information,please read the SAP note 207436. You don't have to
implement the coding corrections, if they are already in your system
with the hotpackage. But it explains very detailed the system
behaviour. The example in the note with field EBELN could be
replicated on your field VBELN.
About the MEINS field, please refer to 1-U_MEINS (bseg-meins field).
The SAP note 215798 may also be helpful.
Mauri

How to add Traffic Lights to a Report?

Hi,
How do U create a Traffic Light? and how to you change the Light? That's all I need.
Thanks,
Kishan

hi dude,
This is the way u add lights to ur alv report.
I'm following this method and i'm getting lights. This will work for sure.
In data declaration along with your alv display structure as a field named lights(any name).
DATA : BEGIN OF wa_srr,
vbeln LIKE vbak-vbeln, "Sales Order number
posnr LIKE vbap-posnr, "Item nunmber
matnr LIKE makt-matnr, "Material number Desc
maktx LIKE makt-maktx, "Material Description
gbstk LIKE vbuk-gbstk, "Completion status
bukrs LIKE knb1-bukrs, "Company Code
butxt LIKE t001-butxt, "Company Code description
vkorg LIKE vbak-vkorg, "Sales organization
vtext LIKE tvkot-vtext, "Sales Org description
vtweg LIKE vbak-vtweg, "Distribution Channel
dtext LIKE tvtwt-vtext, "Dist Channel description
spart LIKE vbak-spart, "Division
dvtxt LIKE tspat-vtext, "Division Description
kunnr LIKE vbak-kunnr, "Customer Number
name1 LIKE kna1-name1, "Customer Name
land1 LIKE kna1-land1, "Country
regio LIKE kna1-regio, "State
ort01 LIKE kna1-ort01, "City
erdat LIKE vbak-erdat, "Creation Date
vdatu LIKE vbak-vdatu, "Due date
kwmeng LIKE vbap-kwmeng, "Material Quantity
netpr LIKE vbap-netpr, "unit net price
netwr LIKE vbap-netwr, "Price
wavwr LIKE vbap-wavwr, "Cost price
bzirk LIKE vbkd-bzirk, "Sales District
bztxt LIKE t171t-bztxt, "Sales District Discription
lights, "Diplaying Status
END OF wa_srr.
While you are building the field cat do as follows
FORM build_layout CHANGING l_wa_layout TYPE slis_layout_alv.
l_wa_layout-zebra = cb_zebr. "Set alterante colored line
l_wa_layout-colwidth_optimize = cb_colop. "Optimize column width
l_wa_layout-no_vline = cb_novli. "No vertical line
l_wa_layout-no_colhead = cb_nocol. "no column Header
l_wa_layout-lights_fieldname = 'LIGHTS'. "Set light field
(assigning the field u have added in ur structure here as light field in alv report)
ENDFORM. " BUILD_LAYOUT
Then as per the logic, u make green, yellow or red light
Example,
FORM build_light .
LOOP AT it_srr INTO wa_srr. "for all entries in the table
IF wa_srr-gbstk = 'C'. "If status is 'completed',
wa_srr-lights = '3'. "Show green signal light
ELSEIF wa_srr-gbstk = 'B'. "If status is 'Partial'
wa_srr-lights = '2'. "Show yellow signal light
ELSE. "If status is 'incomplete'
wa_srr-lights = '1'. "Show red signal light
ENDIF.
MODIFY it_srr FROM wa_srr. "Update to table
ENDLOOP.
ENDFORM. " build_light
after building ur layout, Pass it to ur alv function module like this.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
i_background_id = 'ALV_BACKGROUND'
i_grid_title = text-011
pass ur layout structure here********
is_layout = wa_layout
it_fieldcat = it_fcat
it_sort = it_sort
i_save = v_save
is_variant = wa_variant
is_print = wa_print
TABLES
t_outtab = it_srr
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE i001. "List cannot be displayed
ENDIF.
wat all i did to add light is,
1) adding an extra field in the main structure.
2)create internal table with this structure as data table for alv report
3) add 'field name' field in layout
4) I have passed values(3, 2, 1) for green, yellow and red light resp, to the field(LIGHTS) in the internal table that is passed to alv function module.(Based on some condition)
5) pass the layout structure layout to alv function module
Thats it. If u do all this teps, u r done with it.
Lemme know u solved it by giving points.
with regards,
praveen.

Add price gorup to FBL3N report

Could any one help me to find where the ALV is called in standard program RFITEMGL of Tcode FBL3N since I need to add price group from table KNVV to the report?
Thanks

resolved

Free software for creating tables/report templates?

Hi, I need to create some tables, reports and timetable templates for school but don't have any software currently that can cope with this. I'd be very grateful if someone could suggest a free software program that can let me easily draw straight lines and add text etc. Thanks very much for any advice.
For info:
I have a MacBook running 10.5.8

Look at Sandvox

To Use Cursor or TYPE table Index by PLS_integer

Hi All,
Let's see if I have table with no. of records 19,26,20,000.
If I want to loop through all the records which will be a optimized way To Use Cursor or TYPE table Index by PLS_integer.
Please guide.
Thanks.

What is it you want to do to/with the rows you're looping through?
Ideally you want to avoid looping, as that's row by row (aka slow by slow) processing and it's expensive time-wise.
If you're doing DML (insert/update/delete) then you're best off doing it in one sql statement, rather than looping.

Pivot Table Report Issue

Hi,
I have created a Pivot Table report (I use them all the time in Excel) as one of my rows...I am using a field that is a formula. When I look at the pivot table results there is a sum by this "row category"...all total 1726 items (correct # of total items' but the sum by each of the 4 items is wrong...when I drill (I can only drill from a higher level)...I get the detail of the 1726 items correctly...but if I do a pivot in Excel off the detail I get a different number in the 4 categories (actually the correct summary data)....HOW do I fix this...we really want to use the power of the report...but with such a large error it is difficult to trust the results of the report.
Report
Source Type     MAG Created Year     Parent Account     Target Market     # of Accounts
Marketing     2004     Unspecified     Key Account     2,521
          Quanta Services Inc     Key Account     1
     2005     Unspecified     Key Account     388
          Vipar Heavy Duty     Key Account     29
     2006     Unspecified     Key Account     824
     2007     Unspecified     Key Account     838
          Domino's Pizza     Key Account     9
     2008     Unspecified     Key Account     582
Marketing                    5,192
Grand Total                    5,192
When you drill down...for instance...the data for 2007 Unspecified is 358 NOT 838....
Please assist!!! ASAP

It is very difficult to troubleshoot a report without seeing it, but it looks to me like you have a problem with your aggregation rules... each column has an aggregation rule, and a pivot table measure can also have an aggregation rule... sometimes, depending on the formula and columns that make up your formula, the aggregation rules can cause seemingly incorrect totals because the data is aggregated on the table and then re-aggregated on the pivot table.
If you would like, you may email me directly and I will see if I can help further.
My email is in my profile.
Mike L

Add cursor in 2d table report

Similar Messages

Maybe you are looking for