Add Customer Field while posting Journal Entry

BSEG-KUNNR is not exposed while posting journal entry using FB01. It is not available in the field status group also. How to add customer number field in the field status group to make it available during posting journal entry using FB01.

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Similar Messages

"21141: Error while posting journal entry :-10 / Internal error"

Hi All,
I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
Thanks in advance.
uddin

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

Error while posting journal entry: -5012/unbalanced transaction

Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
Jac

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

How to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO?

Hi Experts
i have a reuirement where i have to add custom field in delivery address/performance location tab in SRM shopping cart and Ship to address Pop-up in SRM PO
i am doing below steps for this.
1. Adding custom field ZZfield in structure INCL_EEW_PD_PARTNER_CSF by using append structure.
2. Spro ->Supplier Relationship Management -> SRM Server -> Cross application basic settings -> Extensions and field controls (personalization) -> Configure field control ->Configure Control for Fields of Substructures
then click on "Metadata for Fields of Substructures and Table-Like Enhancements"
add the below entry
Bus. Object Set Type : I am trying 7 and 29
Structure Field Name : ZZfield
Bus. Object Type       : BUS2121/BUS2201
Set Level                    : Item
Field Visible : Check box should be checked
Field Enable : check box should be checked
Can anyone has the idea of this?
Thanks
Rohit

Hello Rohit,
Please create a enchancement for component /SAPSRM/WDC_UI_DO_SHIPTO.
Add new input field and label in view V_DODC_SHIPTO.
Bind the input field value with field ZZfield from structure /SAPSRM/WDC_UI_DO_SHIPTO in the context node SHIP_TO .
Regards,
Neelima

Add Customized fields in FICA document

Dear all,
We are having a requirement in which we need to add customized fields in FICA document and need to post them .Can anyone please tell me how to meet this requirement
susmita
Edited by: susmitha harini on Aug 11, 2010 12:46 PM

Hi Susmita
You can add the fields to the customer includes
CI_FKKOP
CI_FKKKO
To create/update the customer fields in automated processes you can use the standard SAP BAPI:
BAPI_CTRACDOCUMENT_CREATE
BAPI_CTRACDOCUMENT_CHANGE
Check out the import table EXTENSIONIN with structure BAPIPAREX.
To add the fields to the standard SAP transactions, have a look in IMG under
Financial Accounting
Contract Accounts Receivable and Payable
    Basic Functions
      Posting and Documents
        Document
          Screen Preparations
Yep
Jürgen
Edited by: sattlerj on Aug 12, 2010 8:45 PM
Edited by: sattlerj on Aug 12, 2010 8:49 PM - Added EXTENSIONIN

Add custom fields in ML81n line item level

Hi All,
We have a requirement to add custom field in ML81N. I have found an enhancement SRVDET and table CI_ESLLDB to add the custom field. But my problem is, I cant find the screen where can I add that custom field. Does anybody knows this?
Appreciate your inputs.
Thanks in advance.

Dear,
Below mentioned enhancment will create a new tab strip in the detail screen of service entry
SRVDET              User screen on tab strip of service detail screen
Create one project in CMOD, then assign the enhancement
Calling screen No. Area     Called screen   No. Short Text
SAPLMLSP        0220 SUSCUSER SAPLXMLU        0299
New field should be added in the include structure CI_ESLLDB
Desgin these new fields in screen 0299 of program SAPLXMLU.
Put your code in FM
EXIT_SAPLMLSP_040              Transfer of Data to Detail User Screen
EXIT_SAPLMLSP_041              Adoption of Data from User Screen
Regards
Dillip

Add custom fields in EL09/EL35 transaction

Hi,
I need to add custom fileds in these transactions in order to specify particular client information I have to extract in the output of meter reading order.
How can I accomplish this need?
Do I need to define a custom transaction or do I have to implement some customizing-badi,... I didn't find anything useful in my researches.
Can you help me please?
Thanks,
Gabriele

Hi Gabriele,
When we are generating meter reading orders, entries are made in tables EABL & EABLG. You can add custom fields in these tables using enhancement EDMMR001.
Based on your rules / logic, you can update these custom fields from user exit - EXIT_SAPLEL01_010.
Now, when you are downloading meter reading orders, you can access these values.
Alternatively, if you can derive these additional values in run time, you can place your logic in Meter Read Order Download Print Workbench program.
Hope this helps.
Regards,
Avinash

Add custom fields in a new tab in J1B3N

Hi All,
In the project we need to to add custom fields from custom table (z table) in an Additional Tab (header) of J1B3N transaction. How can we do it using user-exits or BADI's?
I've looked for this requirement in the forum, but none of them related to J1B3N transaction.
If someboby has developed something like that, I will be grateful for help.
Thanks in advance.

Hi Okuma,
Did you tried what are the badis are triggering while you run this transaction,then you will get an idea .
Regards,
Madhu.

Add Custom Fields in FB70?

Is it possible to add custom fields in FB70 to capture extra data?
We enter FI-A/R invoices in FB70 and would like to capture data in the custom fields of sales order (VA02) additional data B screen for reporting purposes. (We do not use debit memo.)

Hello,
You can see the screen variants in FB70. However, these screen variants are for that particular session of posting. Once you come back, then you will have standard screen for posting in FB70.
I would suggest not to change any forceful changes to FB70 screen to avoid any further complications in future upgrades.
Regards,
Ravi

Add Custom Fields in MB1B Tcode

I want to Add Custom fields in MB1B Header Data. I not able to find way how to do that. So can you please let me know how to add custom fields in MB1B.
Thanks & Regards
Nikunj Shah

Hi Parikshit,
There is no badi or user exit available to add a custom fields.If that fields are standard one then it can be controlled against the movement type.Go to T code: OMCJ .Select the movement type, and click on display. And maintian the filed settings accordingly.
Post if need help.
if you need validations there are some exits.
TCode MB1B
EXIT_SAPMM07M_001 - MBCF0002 - Customer function exit: Segment text in material doc. item
EXIT_SAPMM07M_003 - MBCFC003 - Maintenance of batch master data for goods movements
EXIT_SAPMM07M_004 - MBCFC004 - Maintenance of batch specifications for goods movements
EXIT_SAPMM07M_005 - MBCF0006 - Customer function for WBS element
EXIT_SAPMM07M_009 - MBCF0009 - Filling the storage location field
EXIT_SAPMM07M_010 (Propose Batch / Transfer Batch) - MBCFC010 - Propose batch number on Inventory Management item screen
Regards,
Madhu.
Edited by: madhurao123 on Jun 28, 2011 9:44 AM

How to add custom field to the task via CSOM?

Hello!
I'm trying to add custom fields to my programmatically created task in project 2013. Tasks are created. Then I get them and load custom fields by:
DraftProject projCheckedOut = tstProj.CheckOut();
projContext.Load(projCheckedOut.Tasks);
projContext.ExecuteQuery();
foreach (var task in projCheckedOut.Tasks)
projContext.Load(task.CustomFields);
projContext.ExecuteQuery();
But the each CusomFieldCollection object has only 1 field (Health, because it have a default value and created automatically). But when I load my project in Project professional i saw more than 1 field, but they are empty.
Then I tried to add a new custom field to each CusomFieldCollection of each task.
var newField = new CustomFieldCreationInformation();
newField.FieldType = CustomFieldType.TEXT;
newField.Name = "F_1";
newField.Description = "test description";
task.CustomFields.Add(newField);
task.CustomFields.Update();
New field added to the collection, but when I update the project and publish it nothing is happened.
How to add a custom field to the each task and set it value?
Or how to attach enterprise task custom field to my tasks.
I'm using Microsoft.ProjectServer.Client.

Hi
Hope the below posts are of some helpful for you
http://social.msdn.microsoft.com/Forums/en-US/d79f22f2-7fd2-46af-b778-e189c8611120/use-csom-to-update-projects-custom-fields?forum=project2010custprog
http://msdn.microsoft.com/en-us/library/microsoft.projectserver.client.project.setcustomfieldvalue.aspx
Thanks
Geeth
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.

Add Custom Field not to all Incidents but in specific IR,SR template

Hello, Dear Colleagues.
With this manual:
Adding a Custom Property to a Form – Support Group Property for Problem Form Example, I have added similarly custom field List Picker to Incident Form.
But now this custom field is default field for all new incident. How can I add custom field just in specific incident request or service offering (for example, Printer Repair service offering for Self-Service portal).
Thanks.
Have a nice day.

You're certainly on the right track, this comes down to TypeProjections -
something you'll absolutely want to start getting familiar with. I was about to start typing a quick post when I found a related said post exists out on the interwebs (https://dynamicdatacenter.wordpress.com/2012/10/03/add-custom-service-request-forms-in-servicemanager2012/).
So, you can do it manually or you can create a relationship and this XML gets built for you. It certainly makes it a bit easier in terms of XML hacking when you're getting started too (i.e. copying and pasting the relationships)
That said, I built a version of your management pack including a relationship (Configuration Item -> Printers) so you can get back to building and spend less time troubleshooting some of these quirks. You can copy and paste the following to an XML file,
seal it to make it an MP and then bundle to a MPB with the ServiceRequestForm dll.
<ManagementPack ContentReadable="true" SchemaVersion="2.0" OriginalSchemaVersion="1.1" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<Manifest>
<Identity>
<ID>BranchPrinters</ID>
<Version>1.0.0.5</Version>
</Identity>
<Name>BranchPrinters</Name>
<References>
<Reference Alias="System">
<ID>System.Library</ID>
<Version>7.5.8501.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Console">
<ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Console</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Alias_48e2011a_96d4_42e2_9a09_7e0da882a6f3">
<ID>System.WorkItem.ServiceRequest.Library</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Alias_6e472436_00bc_4ca4_bff5_ffd041972427">
<ID>Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring</ID>
<Version>7.5.3079.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="WorkItem">
<ID>System.WorkItem.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="SupportingItem">
<ID>System.SupportingItem.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="CoreKnowledge">
<ID>System.Knowledge.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
<Reference Alias="Catalog">
<ID>System.ServiceCatalog.Library</ID>
<Version>7.5.2905.0</Version>
<PublicKeyToken>31bf3856ad364e35</PublicKeyToken>
</Reference>
</References>
</Manifest>
<TypeDefinitions>
<EntityTypes>
<ClassTypes>
<ClassType ID="ServiceRequestBranchPrinters" Accessibility="Public" Abstract="false" Base="Alias_48e2011a_96d4_42e2_9a09_7e0da882a6f3!System.WorkItem.ServiceRequest" Hosted="false" Singleton="false" Extension="false">
<Property ID="Branches" Type="enum" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" EnumType="Branches" />
<Property ID="PrinterModels" Type="enum" AutoIncrement="false" Key="false" CaseSensitive="false" MaxLength="256" MinLength="0" Required="false" Scale="0" EnumType="PrinterModels" />
</ClassType>
</ClassTypes>
<RelationshipTypes>
<RelationshipType ID="Printer" Accessibility="Public" Abstract="false" Base="System!System.Reference">
<Source ID="Source_facee4a3_7203_41bd_87d4_e30123445605" MinCardinality="0" MaxCardinality="2147483647" Type="ServiceRequestBranchPrinters" />
<Target ID="Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302" MinCardinality="0" MaxCardinality="1" Type="System!System.Printer" />
</RelationshipType>
</RelationshipTypes>
<EnumerationTypes>
<EnumerationValue ID="Branches" Accessibility="Public" />
<EnumerationValue ID="PrinterModels" Accessibility="Public" />
</EnumerationTypes>
<TypeProjections>
<TypeProjection ID="ServiceRequestBranchPrinterForm_TypeProjection" Accessibility="Public" Type="ServiceRequestBranchPrinters">
<Component Path="$Context/Path[Relationship='Printer']$" Alias="ComponentAlias_3ae38849_26ce_4c7c_86b4_6b6201aba2f3" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="AssignedTo" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemClosedByUser']$" Alias="ClosedBy" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemCreatedByUser']$" Alias="CreatedBy" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAffectedUser']$" Alias="AffectedUser" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToConfigItem']$" Alias="RelatedConfigItems" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAboutConfigItem']$" Alias="AboutConfigItem" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAboutConfigItem' TypeConstraint='System!System.Service']$" Alias="AffectedServices" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToWorkItem']$" Alias="RelatedWorkItems">
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="RelatedWorkItemAssignedTo" />
</Component>
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemRelatesToWorkItem' SeedRole='Target']$" Alias="RelatedWorkItemSource">
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemAssignedToUser']$" Alias="RelatedWorkItemAssignedTo" />
</Component>
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasFileAttachment']$" Alias="FileAttachments">
<Component Path="$Target/Path[Relationship='SupportingItem!System.FileAttachmentAddedByUser']$" Alias="FileAttachmentAddedBy" />
</Component>
<Component Path="$Target/Path[Relationship='CoreKnowledge!System.EntityLinksToKnowledgeDocument']$" Alias="RelatedKnowledgeArticles" />
<Component Path="$Target/Path[Relationship='Catalog!System.WorkItemRelatesToRequestOffering']$" Alias="RelatedRequestOffering" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasActionLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.ActionLog']$" Alias="ActionLog" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasCommentLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.AnalystCommentLog']$" Alias="AnalystCommentLog" />
<Component Path="$Target/Path[Relationship='WorkItem!System.WorkItemHasCommentLog' TypeConstraint='WorkItem!System.WorkItem.TroubleTicket.UserCommentLog']$" Alias="EndUserCommentLog" />
</TypeProjection>
</TypeProjections>
</EntityTypes>
</TypeDefinitions>
<Categories>
<Category ID="BranchPrinters.Category" Value="Console!Microsoft.EnterpriseManagement.ServiceManager.ManagementPack">
<ManagementPackName>BranchPrinters</ManagementPackName>
<ManagementPackVersion>1.0.0.0</ManagementPackVersion>
</Category>
<Category ID="CategoryId_11239275_bd51_4b5e_8038_f4c4f5c0835d" Target="Branches" Value="Alias_6e472436_00bc_4ca4_bff5_ffd041972427!Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring.EnumerationViewTasks" />
<Category ID="CategoryId_882c009d_9a50_4455_aff6_8b715edeb5b0" Target="Branches" Value="System!VisibleToUser" />
<Category ID="CategoryId_e5352c5e_4c1b_4833_a5e0_bf9dd1bd42cd" Target="PrinterModels" Value="Alias_6e472436_00bc_4ca4_bff5_ffd041972427!Microsoft.EnterpriseManagement.ServiceManager.UI.Authoring.EnumerationViewTasks" />
<Category ID="CategoryId_7fe9aacc_43b5_4dbc_b57e_223e579fa613" Target="PrinterModels" Value="System!VisibleToUser" />
</Categories>
<Presentation>
<Forms>
<Form ID="ServiceRequestBranchPrinterForm" Accessibility="Public" Target="ServiceRequestBranchPrinterForm_TypeProjection" Assembly="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms" TypeName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms.ServiceRequestForm">
<Category>Form</Category>
<Customization>
<AddControl Parent="srFormTabControl" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.TabItem" Left="377.5" Top="15" Right="0" Bottom="0" Row="0" Column="0" />
<PropertyChange Object="TabItem_1" Property="Header">
<NewValue>Printer Information</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.ListPicker" Left="162.5" Top="63" Right="385" Bottom="827" Row="0" Column="0" />
<PropertyChange Object="ListPicker_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="Margin">
<NewValue>162.5,63,0,827</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="Margin">
<NewValue>162.5,63,0,0</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="95.5" Top="62" Right="552" Bottom="826" Row="0" Column="0" />
<PropertyChange Object="Label_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>95.5,62,0,826</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>95.5,62,0,0</NewValue>
</PropertyChange>
<Move X="13" Y="-1">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,565,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,0,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>82.5,63,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_1" Property="ParentCategoryId">
<NewValue>61909694-0d19-fb73-1a24-4f327facb268</NewValue>
</PropertyChange>
<PropertyBindingChange Object="ListPicker_1" Property="SelectedItem">
<NewBinding Enabled="True" Path="PrinterModels" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<Move X="21.8066666666666" Y="2.48000000000002">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,587,827</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,0,827</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.6933333333334,60.52,0,0</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_1" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_1" Property="Content">
<NewValue>Printer Model</NewValue>
</PropertyChange>
<Move X="-0.193333333333385" Y="-2">
<Element Name="Label_1" />
</Move>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,587,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,0,825</NewValue>
</PropertyChange>
<PropertyChange Object="Label_1" Property="Margin">
<NewValue>60.8866666666668,62.52,0,0</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="96.5" Top="112" Right="551" Bottom="776" Row="0" Column="0" />
<PropertyChange Object="Label_2" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>96.5,112,0,776</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>96.5,112,0,0</NewValue>
</PropertyChange>
<Move X="35.8066666666666" Y="24.52">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,587,800</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,0,800</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.6933333333334,87.48,0,0</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_2" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_2" Property="Content">
<NewValue>Branch</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.ListPicker" Left="185.5" Top="93" Right="362" Bottom="797" Row="0" Column="0" />
<PropertyChange Object="ListPicker_2" Property="Width">
<NewValue>Auto</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>185.5,93,362,0</NewValue>
</PropertyChange>
<Move X="23" Y="-5">
<Element Name="ListPicker_2" />
</Move>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,385,792</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,0,792</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Width">
<NewValue>180.5</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="Margin">
<NewValue>162.5,98,0,0</NewValue>
</PropertyChange>
<Move X="-0.193333333333385" Y="-8.51999999999998">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,587,792</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,0,792</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,96,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="ListPicker_2" Property="ParentCategoryId">
<NewValue>20d8a660-29aa-9470-2139-555f9938d114</NewValue>
</PropertyChange>
<PropertyBindingChange Object="ListPicker_2" Property="SelectedItem">
<NewBinding Enabled="True" Path="Branches" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<Move X="0" Y="-2">
<Element Name="Label_2" />
</Move>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,587,790</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,0,790</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="Margin">
<NewValue>60.8866666666668,98,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_2" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<AddControl Parent="Grid_1" Assembly="Microsoft.EnterpriseManagement.UI.SMControls, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="Microsoft.EnterpriseManagement.UI.WpfControls.SingleInstancePicker" Left="211.5" Top="163" Right="336" Bottom="709" Row="0" Column="0" />
<PropertyChange Object="SingleInstancePicker_1" Property="Width">
<NewValue>Auto</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>211.5,163,336,0</NewValue>
</PropertyChange>
<Move X="47" Y="16">
<Element Name="SingleInstancePicker_1" />
</Move>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,383,725</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,0,725</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Width">
<NewValue>180.5</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="Margin">
<NewValue>164.5,147,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="SingleInstancePicker_1" Property="BaseClassId">
<NewValue>319e665c-8db5-c06b-fd4b-93991942e429</NewValue>
</PropertyChange>
<PropertyBindingChange Object="SingleInstancePicker_1" Property="Instance">
<NewBinding Enabled="True" Path="ComponentAlias_3ae38849_26ce_4c7c_86b4_6b6201aba2f3" Mode="TwoWay" BindsDirectlyToSource="False" UpdateSourceTrigger="PropertyChanged" />
</PropertyBindingChange>
<AddControl Parent="Grid_1" Assembly="PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Type="System.Windows.Controls.Label" Left="86.5" Top="158" Right="561" Bottom="730" Row="0" Column="0" />
<PropertyChange Object="Label_3" Property="HorizontalAlignment">
<NewValue>Left</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>86.5,158,0,730</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="VerticalAlignment">
<NewValue>Top</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>86.5,158,0,0</NewValue>
</PropertyChange>
<Move X="26" Y="2">
<Element Name="Label_3" />
</Move>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,587,732</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,0,732</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="Margin">
<NewValue>60.5,156,0,0</NewValue>
</PropertyChange>
<PropertyChange Object="Label_3" Property="FlowDirection">
<NewValue>RightToLeft</NewValue>
</PropertyChange>
<PropertyBindingChange Object="Label_3" Property="Content">
<NewBinding Enabled="False" />
</PropertyBindingChange>
<PropertyChange Object="Label_3" Property="Content">
<NewValue>Printer</NewValue>
</PropertyChange>
</Customization>
</Form>
</Forms>
</Presentation>
<LanguagePacks>
<LanguagePack ID="ENU" IsDefault="true">
<DisplayStrings>
<DisplayString ElementID="BranchPrinters">
<Name>BranchPrinters</Name>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters">
<Name>Service Request, Branch Printers</Name>
<Description>This class inherits from Service Request to define Branch Printers</Description>
</DisplayString>
<DisplayString ElementID="Branches">
<Name>Branch List</Name>
<Description>Contains a list of branches within the organization</Description>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters" SubElementID="Branches">
<Name>Branches</Name>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinters" SubElementID="PrinterModels">
<Name>PrinterModels</Name>
</DisplayString>
<DisplayString ElementID="PrinterModels">
<Name>Printer Model List</Name>
<Description>Contains a list of printers featured throughout the organization</Description>
</DisplayString>
<DisplayString ElementID="ServiceRequestBranchPrinterForm">
<Name>ServiceRequestBranchPrinterForm</Name>
<Description>Specify your form description.</Description>
</DisplayString>
<DisplayString ElementID="Printer">
<Name>Printer</Name>
</DisplayString>
<DisplayString ElementID="Printer" SubElementID="Source_facee4a3_7203_41bd_87d4_e30123445605">
<Name>Source_facee4a3_7203_41bd_87d4_e30123445605</Name>
</DisplayString>
<DisplayString ElementID="Printer" SubElementID="Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302">
<Name>Target_8100dcd2_9c0a_42d1_9746_735a6e9ec302</Name>
</DisplayString>
</DisplayStrings>
</LanguagePack>
</LanguagePacks>
<Resources>
<Assembly ID="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms" Accessibility="Public" FileName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms.dll" HasNullStream="false" QualifiedName="Microsoft.EnterpriseManagement.ServiceManager.Applications.ServiceRequest.Forms, Version=7.0.5000.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</Resources>
</ManagementPack>
Adam Dzak

Customize Approval Form to add custom fields using SharePoint Designer

Hi,
i have a created a Custom approval workflow using SharePoint Designer 2010. This is two steps approval WF, All i did put the variable "CancelonRejection" Value "Yes" and one Approval action with 2 different users as Serial. Right now
Status, Requested by, Consolidated comments and comment fields are available on the approval form. Now i want to add some fields with radio buttons on Approval Form, so that 1st approver can select those radio/check box. Once 1st approver will approved this
then display all the values on 2nd approver approval from or send email to 2nd approver along with all the information from 1st approver.
Thanks in advanced!

Hi,
According to your post, my understanding is that you wanted to customize Approval Form to add custom fields using SharePoint Designer.
In the SharePoint Designer, you can customize the task form.
Here is a great article for your reference:
Creating Custom Workflow Task Approval Forms with SharePoint Designer 2010
However, every task can only have one task form.
That is to say, the two approvors will have the same task form.
As a workaround, I recommend to customzie the task form using InfoPath.
You can create different view for the approvors.
You need to add form load rules to swich views based on the approvors.
More information:
Using Multiple Views in Customized List Forms
Add, delete, and switch views (pages) in a form - InfoPath
Best Regards,
Linda Li
Linda Li
TechNet Community Support

How to add custom fields in BADI Subscreen.

Hi Friends,
I have to include some custom fields in MFBF tcode.(In make-to-order tab page).
To do that I have used RM_HR_INTEGRATION BADI definition and created implementation for this. In the provided subscreen I tried to add custom fields but it asks access key . I donu2019t know , how to proceed further. Your help is needed.
Or kindly provide me solution to achieve my requirement.
Thanks in Advance,
senthil.

Hi Venky,
We can see the documentation in
se18 -> badi -> LE_SHP_TAB_CUST_HEAD -> display -> documentation button above the definition name
in the first pop-up of documentation..go to the end which says 'Further notes'
Further notes
Documentation on BAdI Interface LE_SHP_TAB_CUST_HEAD
click on this and we have a detailed description of each method defined in the badi
Hope it helps
Regards
Byju

Add Custom fields in Report Incident Screen in EHSM

Hello experts,
I want to add custom fields like Notification No. and division in Report Incident screen in EHSM.
I have added two fields.
Business Object: EHHSS_INCIDENT
Node: BASIC_INFO_ALL
Structure: INCL_EEW_EHHSS_INC_BINFA_D (added two fields using append structure)
Now how can i link with my screen and how to fetch notification data (standard F4 help)?
and when i save data, where it will save?
Can you guide me with proper steps for it as i am new in it.
Thanks in advance.

Hi Jayvin,
To add the above fields on the screen, open the component configuration of the required screen.
Enhance the same and add the fields from the respective Node.
You did not worry about saving the data, once the fields are placed on the screen it will get save on click of save/ on event of save.
Regards,
Sanket.

Add Customer Field while posting Journal Entry

Similar Messages

Maybe you are looking for