Open Qty Field in Outbound Delivery

Hi All,
I would appreciate any assistance that you could offer on this issue.
It is concerning the little known 'Open Qty' field in the outbound delivery.
The business process here is to create outbound deliveries, which are then continually added to as and when stock becomes available.
The Open Qty field should display the open qty from the sales order line, which includes the qty just delivered.
So for example, a user attempts to add several lines to an existing outbound delivery (ie outbound delivery > deliver sales order).
The user would then compare the qty delivered against the Open Qty - if they match then ok.  If the qty delivered is less than the open qty, then the user would delete this line as they are only interested in delivering the full qty.
However the 'Open Qty' is not working as expected.  Eg if open qty on sales order is 2000.  But qty delivered is only 1500, the open qty would = 1500.  This is incorrect.  After the user saves the deliver and then re-checks he would see qty delivered = 1500 and Open Qty = 2000, so then he would know that the full qty was not delivered.
This business has just migrated from 4.6c (where this field behaved correctly) to ECC 6.0.
Thanks for any advice.
Regards
Guy

Delivery qty - LIPS-LFIMG.
You cannot get open quantity directly.
use this way.
Delivery qty   - LIPS-LFIMG.
order qty       - VBAP-KWMENG.
open qty = delivery qty - order qty.

Similar Messages

  • Open production orders and outbound delivery after go-live

    Hello All,
    I tried to search answer for this question but could not find answer.
    Could anybody suggest, what to do with open production orders and outbound delivery after go-live when WM is activated. As, after go-live WM-PP interface will be activated and system should consume material from storage bin specified in control cycle and that will happen for newly created production order after go-live,but what about existing production orders how to update production supply area against work center in production order.
    Similarly with outbound delivery how to update WM status after go-live.
    Thanks in advance

    Thanks to both Jurgen and Sander
    Regarding production order yes, one way is to re-read PP master data in production orders, but is that the only way to handle this or do we have any other option?
    I was aware of re-read PP master data but it will real time consuming and also if it will problematic for already released or partially confirmed production orders.

  • Qty miss in outbound delivery

    Dear Experts,
    in some when we create outbound delivery with reference purchase order by T-Code VL10D, few article qty miss  in outbound delivery why this happening has coming pls give the solution ....
    and that will allow manually qty fill after extend the the date in outbound delivery    
    Best Regards
    jagdish

    Dear Jagdish ,
    I believe system is not able to confirm quantity at order on said date , hence you will have to extend date for stock to be available ( availability check confirms quantity to sales order )
    Kindly check stock requirement list  MD04 and analyze whether materials is available for despatch on said date.
    Try same and let me know results.
    Thanks
    Jinoy

  • Delivery Qty and OPEN Qty Field in SALES Order Delivery Reports.

    Dear All Experts.
    Please Help me for which field put for Delivery QTY. and it is necessary to calculate OPEN QTY. or we can put directly from field.
    i used this field for Order Qty : WMENG.
    Please Guide me.
    Thnks With Regards :
    Bhavesh Panchal.

    Delivery qty - LIPS-LFIMG.
    You cannot get open quantity directly.
    use this way.
    Delivery qty   - LIPS-LFIMG.
    order qty       - VBAP-KWMENG.
    open qty = delivery qty - order qty.

  • BOM item qty does not change when header qty changes in Outbound Delivery

    Hi,
    We are using sales BOM and exploding it in Sales Order.  ( Item category of components as TAE )
    I am creating a delivery with reference to  a sales oder ( i have maintained copy controls to copy header and item data). Now when i change BOM header quantity in delivery document system is  not redeterming the components quantity , item quantity of the components does not change.
    Please let me how can i control item qunatity when BOM heade quantity changes in outbound delivery document
    Thanks
    Venkata Rama Reddy.K

    Hello Venkata,
    The components item category is TAE, that means the item category for the header item will be TAQ. Also the pricing will be carried out at the header item level only.
    Now for your query:
    The standard item category controls of TAQ will not have any connection between the header & the item level quantities in the delivery. If you change the quantity of the header item in the sales order, the quantity of the compnenets will be automatically adjusted. But this will not happen in the delivery with the normal settings of TAQ.
    Solution:
    Go to transaction code VOV7 - select TAQ - double click - In the Bill of Material/Configuration section , there is a field "Create Delivery Group" - select "X - Form delivery group with one delivery date".
    Save the settings. Now create a new sales order & then create the delivery & try to change the quantity of the header item, the system will automatically change the quantity of the components. (the system may not change the quantity of the components in the delivery of the old sales order - change it manually)
    With best regards,
    Allabaqsh Patil.
    Idhasoft Ltd.

  • Cost center field in outbound delivery item level.

    I want to make Outbound Delivery without Sales order referance - VL01NO
    In Outbound Delivery, Goto > Item > Financial Processing, there is Cost center field.
    AS a CO user's requirements, I have to input this field.
    But I can not put in there, because it is not active - just display ; screened.
    I want to use this cost center field.
    How can I do it?
    Regards.

    Hi
    The Cost Center Determination settings is in OVF3 -  but there are some cases where the Cost Center must be exceptionally changed. 
    If the document category for order type in IMG VOV8 is defined to be "I" which belong to order type FD - Deliv.Free of Charge, then the field cost center is active for input during transaction VA01. 
    Alternatively, you can specify an order reason and assign a cost center to an order reason. 
    However the standard SAP works only at the header level though, so it would not work if cost center is needed on the line item. 
    The cost center are assign for such business transactions as :
    - Free deliveries
    - Returns
    - Deliveries of advertising materials
    You can also make cost center allocation dependent on the order reason, for example:
    Order reason: Damage in transit
    Order reason: Free sample
    Both the IMG settings are done in transaction OVF3, either with/without the order reason.
    Regds
    MM

  • Stock Type Field on Outbound Delivery Screen

    Hi,
    In transacrion VL02N At line item level on Administration tab there is this field called Stock Type (LIPS-INSMK). Does anyone know what is the purpose of field. How and when this field is populated in case of outbound delivery?
    Regards,
    Pawan.

    Jürgen L. wrote:
    LIPS table is not only used for outbound deliveries, it stores as well inbound deliveries.Deliveries are used as well to communicate with decentralized warehouses or instead of transport order in the warehouse.
    >
    > outbound deliveries can only be made from unrestricted use stock
    Hi Jurgen,
    Thanks for your reply.
    In other words this field is NOT used in case of outbound delivery?
    Regards,
    Pawan.

  • How to update picked qty as delivery qty while creating outbound delivery

    Hi,
    I am using badi definition LE_SHP_DELIVERY_PROC to update delivery qty as picked qty at the time of creating delivery. By using method SAVE_DOCUMENT_PREPARE I am populating delivery qt(yCT_XLIPS- G_LFIMG) to picked qty(CT_XLIPS[1]-PIKMG). and i am also populating update flag as 'I'. after saving the delivery document i am not able to update picked qty which was populated in BADI. could you please suggest anything needs to care. thanks in advance.
    Regards,
    Peranandam

    Hi,
    I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
    This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
    The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
    The picked quantity is generally filled:
    u2022     by printing the picking list
    u2022     Warehouse Management by creating a transfer order
    u2022     or by manual entry
    Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
    In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
    I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
    Regards,
    Andrea

  • Delivery QTY field in the delivery is

    Hello All,
    I have an issue with the delivery QTY. Please find the conversion below
    Dlv.quantity      24      BAG               Dlv.qty      34,391.730        LB
    Conversion        1      BAG                <->          1,433                  LB
    for some reason when SAP is converting the Delivery qty to 34,391.730 when it has to converting it to 34392 LB. I did find out that I am getting this value based on LFIMG_FLO*24 = 34,291.730 LB.
    The problem I am facing is that when I do an STO from one plant to another.
    1) I PGI 34,291.730 LB but when I am trying ot receive against this outbound the system is trying to receive 34392 Lb's and give me an error message deficit of stock in transit . when I look in MB5T it shows 34,291.730 Lb.
    Can some one please let me know if potential reasons for SAP to not convert the Dlv qty properly
    Thank You,

    Hello,
    Your issues seems to be the ones which causes headache , you may
    find interesting information on note 859441, some good text extracted from
    as below:
    In cases in which rounding problems are likely to occur, the system
    proposes the quantity in base units of measure during the goods receipt.
    Unlike at goods issue for the delivery, the quantity at goods receipt
    can only be proposed in ONE unit of measure. In general, this is the
    order unit. Some customers who experience rounding problems, "park"
    small quantities of the corresponding materials in the stock in transit
    to avoid shortfall quantities that may occur due to minor rounding
    problems, because they have to use order quantities during the goods
    receipt. 
    Regards,
    Christian

  • How to populate custom fields for Outbound delivery header (LIKP)

    Hi All,
    I have added one field in the structure LIKP using APPEND structure. Now want to populate this field from a batch program. I have delivery number. Is there any API or BAPI. I already tried using the FM BAPI_OUTB_DELIVERY_CHANGE by populating the extension. Is there any another area (EXIT or BADI) where I need to change.
    Thanks in advance
    Subhankar

    Hi Keshav,
    No . Nothing was happend.
    l_wa_header_data-deliv_numb = '8600007138' .
    l_wa_header_control-deliv_numb = '8600007138'.
    l_wa_extension1 = 'X'.
    append l_wa_extension1 to i_extn1.
    l_delivery = '8600007138'.
    call function 'BAPI_OUTB_DELIVERY_CHANGE'
      exporting
        header_data    = l_wa_header_data
        header_control = l_wa_header_control
        delivery       = l_delivery
      tables
        extension1     = i_extn1
        return         = l_i_return1.
    After processing l_i_return1 is coming as blank.
    Thanks
    Subhankar

  • Ask Function Module to get  "Open Qty" on outbound delivery

    hi All,
    Does anybody know what is the FM I can use to get "Open Qty" (RV50A-LFPMG) ? at VL01N
    or do I have to count it manually to get the open qty?
    I hope not, but if yes, does the value comes from :
    Open Qty = VBAP-LSMENG - (all delivery qty value for SO Line item).
    Thanks!
    Willy

    Hi...
    Take the open qty as ordered qty (field: MENGE)-delivered qty(field: WAMNG) from EKET table.
    Regards,
    KP

  • Unable to update Qty for outbound Delivery using BAPI_OUTB_DELIVERY_CHANGE

    Hi Experts,
    I am unable to update the Outbound Delivery quantity using FM BAPI_OUTB_DELIVERY_CHANGE. I am getting error in BAPI Return "Error in document &1 item &2 (quantity consistency check)".
    Here is my sample program to update Quantity
    *& Report  ZTEST_BAPI                                                  *
    REPORT  ZTEST_BAPI                              .
    tables : lips.
    parameters : v_vbeln like likp-vbeln,
                 v_posnr like lips-posnr.
    data : it_item type BAPIOBDLVITEMCHG occurs 0,
           wa_item type BAPIOBDLVITEMCHG,
           it_return type BAPIRET2 occurs 0,
           i_head type BAPIOBDLVHDRCTRLCHG,
           i_hdata type BAPIOBDLVHDRCHG,
           wa_conf type BAPIOBDLVITEMCTRLCHG,
           it_conf type BAPIOBDLVITEMCTRLCHG occurs 0.
    start-of-selection.
    select single * from lips into lips where
                      vbeln = v_vbeln
                      and posnr = v_posnr.
    if sy-subrc eq 0.
    move lips-vbeln to I_hdata-DELIV_NUMB.
    *append wa_hdata to i_hdata.
    move lips-vbeln to wa_item-DELIV_NUMB.
    move lips-posnr to wa_item-DELIV_ITEM.
    move lips-matnr to wa_item-MATERIAL.
    move lips-charg to wa_item-BATCH.
    lips-LFIMG = lips-LFIMG + 20.
    move  lips-LFIMG to wa_item-DLV_QTY.
    move  lips-LGMNG to wa_item-DLV_QTY_IMUNIT.
    move  lips-VRKME TO wa_item-SALES_UNIT.
    MOVE  'KGM'      TO WA_ITEM-SALES_UNIT_ISO.
    MOVE LIPS-MEINS  TO WA_ITEM-BASE_UOM.
    MOVE 'KGM'  TO WA_ITEM-BASE_UOM_ISO.
    append wa_item to it_item.
    move lips-vbeln to wa_conf-DELIV_NUMB.
    move lips-posnr to wa_conf-DELIV_ITEM.
    move 'X' to wa_conf-CHG_DELQTY.
    append wa_conf to it_conf.
    endif.
    CALL FUNCTION 'BAPI_OUTB_DELIVERY_CHANGE'
      EXPORTING
        HEADER_DATA               = i_hdata
        HEADER_CONTROL            = i_head
        DELIVERY                  = v_vbeln
      TECHN_CONTROL             =
      TABLES
      HEADER_PARTNER            =
      HEADER_PARTNER_ADDR       =
      HEADER_DEADLINES          =
       ITEM_DATA                 = it_item
       ITEM_CONTROL              = it_conf
      ITEM_SERIAL_NO            =
      SUPPLIER_CONS_DATA        =
      EXTENSION1                =
      EXTENSION2                =
        RETURN                    = it_return
      TOKENREFERENCE            =
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
    I need to update Qty to the outbound delivery for an given item.
    Thanks for your quick response.
    With Regards,
    Bala Sankar
    9900433488

    Hi Bala,
    make sure you are setting...
    itemdata-dlv_qty
    itemdata-dlv_qty_imunit
    itemdata-fact_unit_nom     e.g = 1.
    itemdata-fact_unit_denom  e.g = 1.
    Rgds
    Glenn

  • Table name for pick qty field in outbounddelivery

    Hi all
    can anybody please give the table name for the  field pick qty in the outbound delivery.
    regards
    chandra

    Hi,
    The picked quantity is used in the structure LIPS, field PIKMG. It doesnu2019t belong to any transparent table.
    this issue was been discussed in the abaper forum :
    about "Pick quantity".

  • Even after billing the delivery show in VF04 & delivery shows open qty.

    Hi
    I have a issue. The billing document is created from outbound delivery,still the delivery is showing in the VF04 billing due list. The delivery shows open qty. In the order the same qty is shown delivered.
    please advise.
    The timely reply would be rewarded with full points.

    Hi James,
    I think you are creating the sales order with reference to a quotation.Go to copy controls and select OR and QT  and uncheck the complete reference indicator in the details screen.
    I think this give the delivery status "Completed" after creating the billing document.
    Regards,
    Raghav

  • Open Qty is not copied in Delivery for Stock Transfer Order

    Hi,
    In the Stock Transfer Order process, Once the STO Order is created, I am creating delivery in the transaction VL10B or VL10G.
    When I am clicking the background button Delivery gets generated. Then when i am going in the transaction VL02N and increasing the delivery Quantity which is more than STO order quantity, the system is accepting it. But i want the system to throw an error message if the delivery quantity is more than the order qauntity. For this I have made the following settings.
    In the Transaction Code 0VLP, i have selected B in Check Over Delivery field. But still it is not throwing an error.
    The reason for the same may be, the system is not copying the Open Delivery Qty from the STO Order (Which normally happens in Sale Order to Delivery process, bcos of Copy Control). This field has 0 value. So the system is not able check for over delivery.
    If I get this value in the delivery then it should be working fine and the sytem will throw an error for over delivery.
    Can you please suggest me a way to get this open qty value in delivery for STO order or suggest me some other option to check for over delivery in STO.
    Regards
    Vijay

    Dear Friend,
    If I can understand you clearly.
    to achieve your task the best way you can sit with your abaper and configure a routine and assign the same to T-code OVLK delivery type customizing :
    In the Item requirement : Generally it is 202
    reward points if helpful,
    regards,
    Amlan

Maybe you are looking for