Add-in installation

I have users attempting to connect to Defense Connect Online. We have 2 Vista images based on Army Gold Master 8 and 9. AGM 8 machines allow users to run the installation and pass the Add-in test with no problem. Our new image prompts for administrative credentials when they attempt to install the add-in. I've compared security settings on both images and cannot find any difference that would account for this. Does anyone know what could cause the add-in to require admin rights to install?
I've spoken with the DCO helpdesk, and have been told the add-in must be installed with user level rights, or it won't work. (and it doesn't)
This issue is happening on a system not connected to the regular internet, so we don't get the applet pop-up to install, just a run/save download prompt.

Classification: UNCLASSIFIED
Caveats: NONE
Yeah, we've come to the conclusion that we'll need to temporarily give users admin rights to install the add-in. And according to the DCO help desk, they are communicating with Adobe and hopefully the next release of the add-in will install for all users, rather than the profile of the credentials it is installed with.
Greg Whitworth
Booz|Allen|Hamilton
Systems Administrator
502-624-3148
NIPR: [email protected]
SIPR: [email protected]
http://ice.disa.mil/index.cfm?fa=card&service_provider_id=89665&site_id=444&service_catego ry_id=35
Help the Directorate of Information Management serve you better. Please click on the link above to fill out an on-line comment card. Your comments are appreciated.

Similar Messages

BI 7.0 Java Add-on installation hangs

Hi Guru's
While doing upgrade of BW 3.5 (Netweaver 2004) to BI 7.0 (Netweaver 2004s) during Java Add-on installation at "Database Instance Java Add-in" phase the installation hang on "Import Java dump" phase.
I have tried to kill and restart the installation 2-3 times and restarting the complete installation once again it stops at the same phase. Kindly let me know what can be the reason because we have not face this issue in DEV and QA environment. It is my production server.
The environment is HP-UX IA64 with oracle 10g.
Thanks in advance.

Hi Rajesh,
What stage is the installation hanging at ?
Please provide any error info from sapinst_dev.log
Check if java engine is installed and is up and running or not.. You could check the j2ee work directory under which you find j2ee stack related traces.
e.g. check std_server0 to see if the server is up or not
Please send more details
Regards,
Snehal

Add on Installation Error.

Hi,
I removed Addons in Add and Remove and in C:\Program
Files\SAP\SAP Business One\AddOns.
After iam installing Add on it's showing Error LIke
Add on TDS:Add on Installation failed bacuse another versione
ia already installed.please ensure that the verione number is
higher than the versione installed. not only TDS it's showing
Copy express, XL reports.can i remove .sbo files in SAP B1
file.

Hi,
Please take a look at note 819501 on the steps to clean corrupt installation of add-on(s).
For XLR clean remove, follow the steps below.
1. Un-register all addons from Business One> Add On Administration.
2. Log into the company again to refresh it, uninstall process will continue.
3. Close Business One, check from Add Remove Programs, if XLR is still shown, delete it.
4. Delete following files from B1 installation folder
-> by default itu2019s C:\Program Files\SAP\SAP Business One
*AddOnsInstall.sbo
*AddOnsLocalRegistration.sbo
5. Delete folder C:\Program Files\SAP\SAP Business One\AddOns
6. Open SQL server, Delete Database IXMetaDataSBO.
7. In company database, delete all tables starting with ixt and ixv
8. click windows Start> Run> type '%temp%', rename SM_OBS_DLL folder.
for example 'SM_OBS_DLLOld' or delete it.
9. Open Register, delete XLR foler if it exists under
HKEY_LOCAL_MACHINE\SOFTWARE\SAP\SAP Manage\SAP Business One\AddOn\
10. Delete folder iLytix from HKEY_LOCAL_MACHINE\SOFTWARE.
10.Reinstall XLR
In addition, it's not recommended to remove Addons from Add and Remove programs. You can remove AddOnsInstall.sbo and AddOnsLocalRegistration.sbo.
Hope it helps.
Regards,
Jacqueline Jiang
SAP Business One Forums Team

Error in XPRA EXECUTION Phase of Add On installation in SAP sys in SAINT

Hello All,
I have tried to install VERSANH ADD On on my SAP System with SPAM Version 7.00 <0032 kernal level 48.
i have run transaction SAINT imported all PAT and ATT files and started the process.
now after running around 16 Hrs it is throwing error in XPRA EXECUTION Phase.
The Error is
The Add on installation terminated during phase XPRA EXECUTION
Choose CONTINUE to continue the import
Choose BACK to delete the installation queue
Choose LOGS to display the import logs
i have clicked on Continue, the it process and after 1 Hr throws same error
i have navigated to OS Level in usrsaptranslog and there in log i am getting this line as error
ERROR RFC function TRINT PROGRESS INDICATOR returned 18
Thanks in advance.
Edited by: Vinit Soni on Apr 14, 2009 11:05 AM
Edited by: Vinit Soni on Apr 14, 2009 11:06 AM
Edited by: Vinit Soni on Apr 14, 2009 11:07 AM
Edited by: Vinit Soni on Apr 14, 2009 11:08 AM

Please check the log files under /usr/sap/trans/tmp directory. There will be some information about the error and paste the log here to analyze the problem.
Regards,
Subhash

Can't start SAP after Java add-in installation

Hi,
We have migrated our BW 3.1C system to BI 7.0 (Win2003, Oracle 10.2, non-unicode). Everything was OK with the Abap system upgrade. Now we are making a BI Java installation over the BI 7.0 Abap system (Java add-in installation). We have made the first step, SCS instance installation and now the SAP BI 7.0 abap system doesn't startup.
The workprocess fail to connect to Oracle and don't startup:
M Fri Dec 07 22:47:00 2007
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C Prepending F:\usr\sap\BWK\SYS\exe\run to Path.
C Oracle Client Version: '10.2.0.1.0'
C *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
[dboci.c      2159]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c      1986]
B ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error -1     performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
Any idea about how to solve the problem?
Thanks in advance!

Hi,
ORA_NLS33 is not set as environment variable. We uninstalled the J2EE so now everything should be non-unicode and SAP should startup but we continue with the same error.
Some more info...
DW log info when everything was ok:
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C    assuming using instant client with unspecified location.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPBWT's password
C Connecting as /@BWK on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1   048D7FA8   0BD02454   0BD01CDC
C Attaching to DB Server BWK (con_hdl=0,svchp=0BD01C28,svrhp=0BD04A24)
C Starting user session (con_hdl=0,svchp=0BD01C28,srvhp=0BD04A24,usrhp=0BD25D68)
C
C Thu Dec 06 18:00:20 2007
C Now '/@BWK' is connected (con_hdl 0, nls_hdl 0).
Actual DW log with the errors:
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C    assuming using instant client with unspecified location.
C Oracle Client Version: '10.2.0.1.0'
C *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
[dboci.c      2159]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c      1986]
B ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error -1     performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
There is no "C Nls CharacterSet..." line, the problem must be something regarding NLS charactersets, non-unicode/unicode issues...
But we don't know how to solve the problem.
Any idea?
Thanks again,
Jon

Java Add-In installation on a existing ABAP System (MSCS Cluster)

Hi all
we try to install a Java Add-In for a already existing ABAP System with
SAPinst. The ABAP System is a NetWeaver2004s SR1 System in a MSCS Cluster.
We have the Problem that we can´t choose the Installation Drive during
the SAPInst Define Parameter Step during the "Central Services Instance (SCS) Java Add-In" Installation.
But in the Installation Manual for
NW2004s Java AS in Chapter 4.3.2 is stated:
"Caution: You must install it on the same shared disk as the ASCS instance."
If I run the Installation, the SCS will be installed on the local disk E:
beside the Central Instance. But it need to be on the shared Disk P:
beside the ASCS installation. How can I control this?
Stefan

obviously the network share saploc is existing in your system an pointing to a local device.
Delete the local saploc share, install SCS instance, run MSCS first node, additional node, create the local share saploc again (don't forget to set permissions on the share, the default permission did only allow Read vor Everyone) and proceed with installation.
There is a note in creation for this issue.
peter

The Add-on installation is currently in phase DDIC_ACTIVATION

Dear All,
I am applying the addon "ST-A/PI" on SAP ERP 6.0. The status "The Add-on installation is currently in phase DDIC_ACTIVATION" has been there for a few hours now whereas the sap note says it should end in 12 mins approx.
Could you please help in resolving the issue. This is very important.
Thanks
Best Regards,

Welcome to SDN,
You can't change the existing queue if the SPAM status is DDIC_ACTIVATION.
Can you please check the SPAM --> goto --> import logs.
You need to raise an OSS message if you want to reset the SPAM queue.

SAP Standard Customizing is missing after the Add-on installation

Dear Experts,
We have an ERP 6.0 EHP4 system and it has been using for a while. We have done an AFS 6.4 Add-on implementation on top of the ERP system.
We have a configuration only client 200 on the system and that was already there before we did the add-on installation.
Once the add-on installation is completed, we could see most of the SAP Standard configuration which should come along with the add-on is not there in client 200. But everything is there on Client 000 without any problem.
What could be the problem ? have we missed anything here.
I have found a note : 337623 which ask you to manually populate the configuration using SFW5.
I'm not very clear about this. Should we really do this SFW5 ? or is there any other way that we coul'd get those configurations in to client 200 where we have years old other configurations.
Appreciate of you could kindly give some ideas as to how I should get this problem fixed.
Thanks a a lot in advance.
Best Regards
Kushan

HI Kushan,
This sounds like it might be the correct behavior. When you install an ADD-ON into SAP, the install process does not know which client you have saved your default customization settings into so it is likely going to put these into client 000 or 001.
Does that help?
J. Haynes

Add-On installation showing admin privileges error

Hi all,
Scenario for SAP 9.0 PL 07 :-
I have logged in using Windows Standard user profile.
The SAP folder in " C:\Program Files\SAP " has been given full Admin privileges.
But still not able to install the Add-Ons. Giving error of no rights/permission .
Can you please help me locate some other folder which need to be given Admin privileges so that the Add-Ons will install.
Regards,
Angad

@ Pvsb prasad k,
Thanks for the reply.
We have tried giving full rights(full control) to the user for the SAP folder in " C:\Program Files\SAP ".
But still the Add-On installation problem exists.
Is there any other folder of SAP which requires the full control permission to be given?
Please suggest.
Regards,
Angad

SAP add-on installation

Hi experts. Sorry in advance (dunno if it is correct place for this question)!
I have created add-on installation (It works correctly 100%, already was implemented).
Data base on current system was restored and now when I try to install this .pat file in SAINT transaction I have following error :
-   Error in phase: CHECK_REQUIREMENTS
-   Reason for error: QUEUE_NOT_EMPTY
-   Return code:
-   Error message:
I have triyed to run OCS_RESET_QUEUE function module, but it did not help.
Thanks for any information in advance!

The correct space would have been SAP NetWeaver Administrator or SAP NetWeaver Application Server. Anyway, there must be something in the transport directory (e.g. /usr/sap/trans) indicating that the request(s) are still being processed. Did you confirm the queue when you previously installed the add-on? Before the system restore?

System Settings Add-On Installer on KDE4.9 [Solved/Disregard]

Hey everyone!
I've been having this problem for days now and I can't figure out what to do. So, here's the problem, I have a working internet connection and everything, however, if I want to go and get a new window decoration the Add-On Installer never gets passed the Initializing loader on the bottom. I have left it alone for hours and it still never got past it. Any ideas?
EDIT: Have no idea what happened, but I woke up this morning and found it working again. So maybe server's were down...? I had upgraded my system (pacman -Syu), so maybe something changed the problem.
Last edited by Nanashi (2013-01-22 19:42:33)

QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
This error means nothing. Its caused by apps using KUniqueApplication, which does some basic stuff like creating a D-Bus connection and forkes to create the real applications see:
https://bugs.kde.org/show_bug.cgi?id=297020

ABAP Add-On Installation issue

Hi Experts,
We are trying to Install our package by using Add On Installation Tool-SAINT but our package is not listed on Installable Add On packages list but to continue Installation we need to have our package on the list.
The steps we carried out are-
1) Created File1.PAT file by using AAK (Transaction : SSDC) for our package .
2) Created File2.SAR file at OS level (i.e By using command SAPCAR_700 -cvf File2.SAR File1.PAT )
3) Imported File2.SAR file into test system by using transaction *SAINT*.
Note : We can see File2.SAR file is uploaded to application server directory *EPS\in.*
Please help me if anybody worked on this.
Thanks and Regards,
Shivanand Kalagi.
Moderator message: not directly related to ABAP development, please have a look in the Netweaver forums.
Edited by: Thomas Zloch on Feb 8, 2011 4:56 PM

Hi Experts,
We are trying to Install our package by using Add On Installation Tool-SAINT but our package is not listed on Installable Add On packages list but to continue Installation we need to have our package on the list.
The steps we carried out are-
1) Created File1.PAT file by using AAK (Transaction : SSDC) for our package .
2) Created File2.SAR file at OS level (i.e By using command SAPCAR_700 -cvf File2.SAR File1.PAT )
3) Imported File2.SAR file into test system by using transaction *SAINT*.
Note : We can see File2.SAR file is uploaded to application server directory *EPS\in.*
Please help me if anybody worked on this.
Thanks and Regards,
Shivanand Kalagi.
Moderator message: not directly related to ABAP development, please have a look in the Netweaver forums.
Edited by: Thomas Zloch on Feb 8, 2011 4:56 PM

Add-In Installation: check logon.ticket_client (see note 994785)

Hi all,
We have successfully setup BI to portal connectivity and it is working fine with just one exception that is BEx Broadcast is not functional. Step 8 and 12 of RSPOR_SETUP are in RED.
STEP 8:
Status 8: Configure User Management in Portal - Add-In Installation: check logon.ticket_client (see note 994785)
STEP 12:
Status 12: Maintain User Assignment in Portal - System failure during call of function module RSWR_RFC_SERVICE_TEST
In this regard, support desk tool is displaying warning over WebAS ABAP setting with following message:
STATUS = YELLOW
User mapping check not possible Try to execute Support Desk Tool by another user in order to perform user mapping check
Applying SAP note 994785 that refers to changing the logon.ticket_client parameter to a client that does not exist in ABAP. We did change the Java client in Visual Admin-->Security Provider service as follows:
1. Choose the User Management tab page.
2. Choose Manage Security Stores.
3. Select the login module CreateTicketLoginModule and choose View / Change Properties.
Also, new parameter value was added to instance profile with logon.ticket_client=799 (client that does not exist in ABAP). And the certificate in STRUSTSSO2 added to ACL with client 799. Restarting the instance and running the report RSPOR_SETUP still encounter the same issues as above in STEP 8 and 12.
Please correct me if I went wrong somewhere in the above process.
Regards.

Hi Sandeep,
Support Desk tool is already installed hence the output.
"In this regard, support desk tool is displaying warning over WebAS ABAP setting with following message:
STATUS = YELLOW
User mapping check not possible Try to execute Support Desk Tool by another user in order to perform user mapping check "
Regards.

Java Add-In Installation for EHP4 ERP system

Hello!
we successfully upgraded our SAP ERP system to EHP4 for SAP.
Our system has only ABAP stack.
Question
1) Is it possible to install a Java Add-In instance for the existing EHP4 system?
2) If yes, can this be done on the same Windows server?
Thank you very much!

Specific Requirements
Take the following specific requirements of the new installation process into consideration:
- The previous SAPInst installation service Java Add-In in SAP ERP 6.0/SAP NetWeaver
7.0 was able to add Java usage types such as EPC, or EP, to existing ABAP-only
systems. This was possible only, if you added AS Java at the same time. The option of a
Java Add-In installation is not any longer available as of the enhancement package 4 for
SAP ERP 6.0. Thus, it is not any longer possible, for example, to add EPC and EP
together with AS Java to an ABAP-only system.
[SAP Enhancement Package 4 for SAP ERP 6.0|https://websmp201.sap-ag.de/~sapidb/011000358700000772192007E]
There are many links on SDN discussing ERP EHP 4 dual stack:
[Re: EHP4 Dual stack;
[ECC 6.0 - EHP4 - Client Import;
Hope this helps.
Thanks,
Naveed

Wrong digital signature for add-on installer

I have created a addon and it gives error as,
Wrong digital signature for add-on installer
When I tried installing this addon on another SAP server,it worked.On the problamatic server,the antivirus has expired.Is virus capable to creating this problem ? I have tried all the options for solving the problem such as,
1.Delete the temporary files.
2.Delete the SBO files.
3.Create a new addon and release it.
4.Create a new addon with different name.

Hi Dilip,
Refer This...........
Link: [url] Wrong Executable Digital Signature for Add-on
Link: [url] SAP Business One AddOn Installer
Link: [url] Wrong digital signature for add-on installer
Link: [url] Wrong Digital Signature...
Thanks
Shafi
Edited by: shafi_sunshine on Aug 18, 2011 7:21 AM

How to deliver add-on installation package to clients

Hi,
We have successfully released the add-on installation package. Now how could we deliver it our clients. how could we deliver the package to others.
regards
chinta

sorry bro,
it did not help me.
i would like to know how i could deliver my package to my clients.
i have a pat file with me, i have a password of it, i have successfully released the package.
but how i could deliver it to my clients..
say if you want to use my package how could i give it to you. bro.
regards
chinta

Add-in installation

Similar Messages

Maybe you are looking for