SAP Standard Customizing is missing after the Add-on installation

Dear Experts,
We have an ERP 6.0 EHP4 system and it has been using for a while. We have done an AFS 6.4 Add-on implementation on top of the ERP system.
We have a configuration only client 200 on the system and that was already there before we did the add-on installation.
Once the add-on installation is completed, we could see most of the SAP Standard configuration which should come along with the add-on is not there in client 200. But everything is there on Client 000 without any problem.
What could be the problem ? have we missed anything here.
I have found a note : 337623 which ask you to manually populate the configuration using SFW5.
I'm not very clear about this. Should we really do this SFW5 ? or is there any other way that we coul'd get those configurations in to client 200 where we have years old other configurations.
Appreciate of you could kindly give some ideas as to how I should get this problem fixed.
Thanks a a lot in advance.
Best Regards
Kushan

HI Kushan,
This sounds like it might be the correct behavior. When you install an ADD-ON into SAP, the install process does not know which client you have saved your default customization settings into so it is likely going to put these into client 000 or 001.
Does that help?
J. Haynes

Similar Messages

IPad running iOS 5 has on the menu bar only have 4 icons, being: back, forward, bookmarks, and the "add to bookmarks", but is missing an icon after the "add to bookmarks" arrow, that is a "show all open browser windows" icon. How do I get it in my safari?

iPad running iOS 5 has on the menu bar only have 4 icons, being: back, forward, bookmarks, and the "add to bookmarks", but is missing an icon after the "add to bookmarks" arrow, that is a "show all open browser windows" icon. How do I get it in my safari?

What you are seeing is how Safari works now in iOS 5. There is no way to get that icon in Safari now. There other much better browsers available in the App Store. Look at iCab Mobile, Mercury, Atomic, ....
I have been running iOS 5x for so long now, that I don't even remember if that icon did appear in earlier iOS versions

My URL/Address bar is missing after the delicious update. My search engine bar is missing after the Delicious update. I cant figure out how to turn them back on. rhouwan@*****.***, thank you.

My URL/address bar is missing after the Delicious update.
My search engine drop down menu is missing after the Delicious update.
I can't figure out how to turn them back on, please advise, thanks.

Try the Firefox SafeMode. 
''A troubleshooting mode, which disables most Add-ons.'' 
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. 
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. 
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

The Add-on installation is currently in phase DDIC_ACTIVATION

Dear All,
I am applying the addon "ST-A/PI" on SAP ERP 6.0. The status "The Add-on installation is currently in phase DDIC_ACTIVATION" has been there for a few hours now whereas the sap note says it should end in 12 mins approx.
Could you please help in resolving the issue. This is very important.
Thanks
Best Regards,

Welcome to SDN,
You can't change the existing queue if the SPAM status is DDIC_ACTIVATION.
Can you please check the SPAM --> goto --> import logs.
You need to raise an OSS message if you want to reset the SPAM queue.

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation. Please help what to do ??

While installing windows with bootcamp error showing "A require Cd/Drive driver is missing" in the middle of installation m not able to install windows on my mac . Please help what to do ??

What DVD drive are you using?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

I'm having problems upgrading from 10.6.8 to Yosemite. My computer locks up after the download and installation process. Does anyone know how I can overcome this problem?

Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

The Add-on installation terminated during phase DDIC_ACTIVATION

Hi
We have ECC 6.0 sr3 on windows 2003 with db2 9.1 database.
I am upgrading to ehp3 .
I am getting this error
The Add-on installation terminated during phase DDIC_ACTIVATION
I checked the logs it is shwoing these 2 tables.
Table FAGL_ACTIVEC was activated (error in the dependencies)
View V_FAGL_ACTIVEC_2 could not be activated
please give me some light on this
thanks

thanks for reply
this is 64 bit system
view i checked it is active but the tavle is partially active
if itry to activate that it is giving me so many errors so it is not allowing me to activate.
please help me
thanks

A site I need for consulting purposes requires an add-on known as "Intranet for Firefox". When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site.

A site I need for consulting purposes (http://www.aegtelecom.com.pt/) requires an add-on known as “Intranet for Firefox”. When one accepts the add-on installation, a return message is displayed claiming that it cannot be found. At this point, I have to use IE to access the site. However, being a steadfast Firefox user, I would prefer to use Firefox for this purpose.

http://www.aegtelecom.com.pt/contactos 
Have you tried contacting that web site's support department for help with that issue? 
If that web site can't find the add-on it says is needed, they need to fix that problem with their servers.
Or you can try using IE Tab2 to run IE in a Firefox tab. 
https://addons.mozilla.org/en-US/firefox/addon/92382

User Dialog as SAP standard customizing

Hello,
If you want to create a transaction as standard customizing transaction, you have to use "view cluster" transaction SE64.
You define a tree at the left of screen with different relation table and you use standard dialog table SM30 with your different view of table.

HI Kushan,
This sounds like it might be the correct behavior. When you install an ADD-ON into SAP, the install process does not know which client you have saved your default customization settings into so it is likely going to put these into client 000 or 001.
Does that help?
J. Haynes

Connect SAP BO server to domain after the installation.

Hello,
I would like to ask if it is fine to connect SAP BO BI 4.x Windows host to the customer domain after the installation of SAP BO.
I was trying to find answer on this but nowhere is explicitly recommended to connect SAP BO host to domain before the installation.
My question is related to Windows AD Authentication where two conditions need to be secured:
1. Windows AD authentication only works if the CMS is run on Windows
2. These Windows machine must be joined to the appropriate AD domain
What I found till know is that you can use Windows AD Authentication only when SAP BO server is in domain.
What is concerning me is that when I start with installation of SAP BO on the server which is not connected to any domain then the installation process is taking during the installation actual hostname of the SAP BO server (e.g. boserver) automatically. There is no requirement or possibility to specify hostname or IP address manually during the installation process. And I assume that connecting SAP BO server to the domain after installation will cause that hostname will change (e.g. to boserver.domain.com).
So question is if this change will cause any issue for functionality of SAP BO application. If not could you please send me an official statement from SAP Note or any BO Documentation as I was not able to find any.
Thanks in advance for opinions and answers.
BR,
Peter

Hi Bill,
thanks for reply. I spoke with couple of my colleagues which are supporting AD and yes I can agree with you that connecting server to the customer domain after the installation of BO can bring some limitation up to Domain policy.
Best practice in order to prevent possible issues is to join server to the domain before installation.
Another possible issue can be that some customers are using own naming convention for server's hostname so joining server to the customer domain is conditioned by a change of hostname and this can cause issue with correct functioning of BO application.
Thanks again for your opinion I really appreciate it.
Wish you a nice week.
BR,
Peter

SAP Standard Menu Text missing while Creating Role in PFCG

All:
I am having a weird issue to where the "SAP Standard Menu Text" is missing when creating a role in PFCG and using the "Copy Menu > From SAP Menu" function.
When I click the button I get the following:
1) Popup of the SAP standard menu tree
2) The area for the folders where there should be text is missing
- appears as the " [ ] " symbols
3) "[ ]" symbols appears through entire menu tree for folders and transactions.
Any ideas?
- Thanks Matt

Yes this is a bug....Please see note 1421375 for the solution

SAP standard transactions for missing parts

Hi!!! Friends,
Is there any SAP standard transaction (s) or procedure (s) which will give the list of missing components/ parts per sales order, process order, stock transfer, projects, subcontracting apart from V_V2, CO24 & ME2O standard transactions?

Hi ,
As per me there is no other transaction. CO24 solves the purpose of missing part list view for projects more effectively.
Rgds

Can't start SAP after Java add-in installation

Hi,
We have migrated our BW 3.1C system to BI 7.0 (Win2003, Oracle 10.2, non-unicode). Everything was OK with the Abap system upgrade. Now we are making a BI Java installation over the BI 7.0 Abap system (Java add-in installation). We have made the first step, SCS instance installation and now the SAP BI 7.0 abap system doesn't startup.
The workprocess fail to connect to Oracle and don't startup:
M Fri Dec 07 22:47:00 2007
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C Prepending F:\usr\sap\BWK\SYS\exe\run to Path.
C Oracle Client Version: '10.2.0.1.0'
C *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
[dboci.c      2159]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c      1986]
B ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error -1     performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
Any idea about how to solve the problem?
Thanks in advance!

Hi,
ORA_NLS33 is not set as environment variable. We uninstalled the J2EE so now everything should be non-unicode and SAP should startup but we continue with the same error.
Some more info...
DW log info when everything was ok:
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C    assuming using instant client with unspecified location.
C Oracle Client Version: '10.2.0.1.0'
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPBWT's password
C Connecting as /@BWK on connection 0 (nls_hdl 0) ... (dbsl 700 110706)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1   048D7FA8   0BD02454   0BD01CDC
C Attaching to DB Server BWK (con_hdl=0,svchp=0BD01C28,svrhp=0BD04A24)
C Starting user session (con_hdl=0,svchp=0BD01C28,srvhp=0BD04A24,usrhp=0BD25D68)
C
C Thu Dec 06 18:00:20 2007
C Now '/@BWK' is connected (con_hdl 0, nls_hdl 0).
Actual DW log with the errors:
M calling db_connect ...
C dbs/ora/array_buf_size = 650000
C CLIENT_ORACLE_HOME is not set as environment variable or
C DIR_CLIENT_ORAHOME is not set as profile parameter.
C    assuming using instant client with unspecified location.
C Oracle Client Version: '10.2.0.1.0'
C *** ERROR => OCI-call 'OCIEnvCreate' failed: rc = -1
[dboci.c      2159]
C *** ERROR => OCI-call 'OCIErrorGet' failed: rc = -2
[dboci.c      1986]
B ***LOG BY2=> sql error -1     performing CON [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY0=> Cannot get Oracle error text. [dbsh#2 @ 1204] [dbsh    1204 ]
B ***LOG BY2=> sql error -1     performing CON [dblink#3 @ 431] [dblink 0431 ]
B ***LOG BY0=> Cannot get Oracle error text. [dblink#3 @ 431] [dblink 0431 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c   1411]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c   10169]
There is no "C Nls CharacterSet..." line, the problem must be something regarding NLS charactersets, non-unicode/unicode issues...
But we don't know how to solve the problem.
Any idea?
Thanks again,
Jon

Why is Bookmark Favicon Changer missing from the add-ons list?

The Bookmark Favicon Changer add-on is currently installed on my browser [ESR 31.2.0] and it seems to work, although imperfectly. Yet the add-on pages (https://addons.mozilla.org/) do not list it at all, as far as I can see. What's going on?

The developer was flaunting the rules that AMO operates under. AMO cut him some slack, and provided a month warning about uploading an updated version. '''Then''' that extension was downgraded, and after warning the developer again and not getting a response from the developer Mozilla disabled the listing for that extension. All he had to do was to upload a new "fixed" version to have that extension enabled again.
Fair or unfair, the rules are the rules. Violate the rules and you're liable to be tossed out. ''I use 6 different extensions that aren't hosted at AMO; two were pulled from AMO years ago due to "new rules" similar to what this developer didn't like and the other 4 were never hosted at AMO for one reason of another.'' And at least Mozilla doesn't do like some of the App stores and restrict add-ons to being installed '''only''' from the Mozilla Add-ons website or Market Place as will soon be known. Add-on developers still have the choice to host add-ons on their own website, and users still have the choice to install add-ons from any website that they want to.
As far as "notification" goes - why would Mozilla want to do that? Mozilla didn't like a "call" the developer was using, so why should Mozilla contact users? And how would Mozilla even go about contacting users? There's no "registry" of users for each extension that is kept by Mozilla, and IMO keeping track users like that would violate each users privacy. Who wants to be tracked in that manner?

Displaying Screen After the Add Button is pressed and the document is saved

Hi All,
I am trying to the Display the Landed Cost screen after the Goods Receipt PO has been added and Saved.
My code below: If pVal.ItemUID = "1" And pVal.FormTypeEx = "143" And pVal.FormMode = SAPbouiCOM.BoFormMode.fm_ADD_MODE And pVal.BeforeAction = False Then
 If pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
 Dim oMenuItem As SAPbouiCOM.MenuItem
 oMenuItem = SBO_Application.Menus.Item("2310") 'modules 2310 is the Landed cost screen'
 oMenuItem.Activate()
 End If
 End If
It displays the landed cost screen when i Click the add button, But I need to display it after the the document has saved, ANy inputs on the same!
Your help is appreciated!!!

Hi Vinayak,
Change the code
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_CLICK Then
to
If pVal.EventType = SAPbouiCOM.BoEventTypes.et_ITEM_PRESSED Then
And it will work.
Best Regards,
Nick He

SAP Standard Customizing is missing after the Add-on installation

Similar Messages

Maybe you are looking for