Add Infotype 77 on ESS Screen

Hi,
I am supposed to create the Infotype 77 screeen in WD Java and add it under ESS Personal Info. I do have knowledge in Webdynpro Java but am not updated on FPM. Can some one let me know step by step procedure to accomplish this.
Also I believe there are some RFC's in backend which can be used...
HRXSS_PER_P0077_CA                   ESS PersInfo: Access infotype 0077 CA
HRXSS_PER_EDIT_P0077_CA           Select the given record for edit
HRXSS_PER_MODIFY_P0077_CA      Modify selected record with given record
HRXSS_PER_NEW_P0077_CA           Create new record of given infotype/subtype
HRXSS_PER_READ_P0077_CA          read all records of an infotype relevant for ESS Pers Info
will they all be required to develop each WD FPM screen??
regards
Justin K

Hi,
1st would be
You can develope this application by two ways ....i.e
Webdynpro Java and
Webdynpro ABAP
If you are doing form Webdynpro ABAP then you need to from SE80 ...then form there you need to create Webdynpro application
Then similary it would create the FM for the same ......
in that FM you need to give the following RFC's
HRXSS_PER_P0077_CA ESS PersInfo: Access infotype 0077 CA
HRXSS_PER_EDIT_P0077_CA Select the given record for edit
HRXSS_PER_MODIFY_P0077_CA Modify selected record with given record
HRXSS_PER_NEW_P0077_CA Create new record of given infotype/subtype
HRXSS_PER_READ_P0077_CA read all records of an infotype relevant for ESS Pers Info
Then it will work fine
for more information on ABAP Web Dy Pro you can get it in following ways
http://help.sap.com/saphelp_nw04s/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm

Similar Messages

  • Any way to add fields to ESS screen without coding?

    Hello Experts,
    I am attempting to add a single field - Religious Denomination (KONFE) to the Personal Data ESS screen for Great Britain.  It is included in the standard screen for maintaining Personal Data in PA30 but for some reason not on the ESS screen.
    Is there any way to add this field to the ESS screen without having to modify the code of the ESS screen in the NWDI?
    Thank you,
    Mike Wellens

    https://wiki.sdn.sap.com/wiki/pages/viewpage.action?spaceKey=profile&title=ESSPersonalInformationUIenhancementwithoutmodification&decorator=printable
    You can check via V_T588MFPROPC, but not sure this will show as it is not in structure

  • ESS to add Infotype 0022 (Education infotype)

    Hi All,
    I am SAP HR consultant, Don't know ESS portal work,
    here my client as asked to add infotype 0022 to ESS potal under Personal data link.
    Please give me detail step by step procedure to add Education infotype to ESS portal under Personal Data link.
    Thanks for your help and support in advance.
    Thanks
    Srilatha

    Try this
    Personnel Personal Data  ESS settings for specific services ESSPM Information (ESS): Determine subtypes
    srilatha there is another forum for ESS in SDN SAP ERP HCM Employee Self-Service
    Check this thread once
    https://forums.sdn.sap.com/click.jspa?searchID=24480494&messageID=6971882
    Edited by: Sikindar on Apr 6, 2009 9:39 AM

  • How to add search help to customer field of field selection on ESS Screen?

    Hi all,
    I am able to get customer field CUSTOMER01 from field selection customization on leave application ESS Screen. How to attach search  help which contains Holiday date & its description to this field?
    Thanks,
    Swapnali

    Hi,
    This is for working time -> leave request screen
    In field selection there is one field 'code for description of illness'. I have done required config for getting this field on ESS Screen. This field already has standard search help. So I m able to view the values of this field on ESS screen .
    So I thought to try assigning custom search help to this CUSTOMER0 field. Is there any method in BADI PT_ABS_REQ through which I can achieve the same. Please help.
    -Swapnali

  • Add Infotype 0045(Loans) to Personal Profile

    Hi All,
    I am currently on EHP6 and i am trying to add Infotype 0045 to personal profile application but i am facing issues.
    I have followed the steps with few exceptions from the below link:
    Adding any Info Type IN ESS in EHP5/6 through WebDynpro Configuration
    I have added the infotypes in HRPAD and V_T7XSSPERSUBTYP.
    I have created all the required configuration(FORM_UIBB, LIST_UIBB and OVP_COMPONENTS).
    I have created proper wiring as well and implemented the Default start date BADI as well.
    I have already make it to work for few other Infotypes.
    I am not sure why is it not working for IT0045.
    Please let me know in case you have any views on this.
    Regards,
    Mayank

    Hi,
    i have already checked all the settings and they all look fine.
    However, to be on the safer side i have also EDITED the same configurations and wiring to make it work for other infotype, and it works correctly for others.
    The problem is something specific to IT0045.
    Regards,
    Mayank

  • Is there a service for showing any infotype in ESS ?

    Hi All,
    I wanted to show education infotype in ESS . Is there any specific service which i can use to display any infotype i want in ESS ? i am on ITS version 50.4 .
    Regards
    PN

    Hello Bharat,
    the client want to display some infotypes (like Communciation or Education) in Personal Administration in ESS portal. We are using ERP 2005 and EP 7 ESS 1.0
    I read your reply in SDN  but couldnt understand properly as i am new in SAP Could you please tell me the steps involved. Is it difficult to add new infotype in ESS portal. Could you please explain in detail. Please email to my mail id at [email protected]
    They were talking about RFC which is totally new to me. Do I have to go through that procedure like creating Functional Module and the connect to portal?
    if possible Please give step by step procedure.
    Thanks & Regards,
    prasan

  • Step by Step procedue to modify SAP standard ESS screens

    Hi all,
    I am new to Enterprise portal..
    I have a requirement to modify the SAP Standard ESS screens, basically to add some new fields into it. I have the NWDI configured in the system. Can some explain me the step by step procedure to bring the source code into NWDS?
    Regards,
    Bharath Mohan B

    Hi
    Complete Custom  like ESS development
    SDN Day session in Las Vegas: Custom development of Web Dynpro ESS applications using Floor Plan Manager
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&
    Re: Steps for  ESS MSS  installation,Configuration
    Go to above links step by step
    Or you can search in SDN accrding to ur requiremt.
    Regards
    _SS

  • ESS - Screen control

    Hi All:
    I am configuring view V_t88m_ESS, to hide some if the fields in IT0002 in ESS.
    For function group EHU5 (for US) I have entered the standard screen 0200 and made the appropriate settings. ( SSN, Date of Birth, etc. output or display only).
    But when I log into ESS the screen are still in Edit mode.
    Has any one encountered this before ?
    Thanks
    Rcahel

    Hi Rachel,
    V_T588M_ESS was used in the old ITS scenario for ESS - it doesn't change the screen fields in ECC  WD Java ESS.
    And even when it was used in the ITS version it was not globally supported - you had to add some code in for most country specific ESS screens.
    Hope this helps,
    Cheers,
    Chris

  • Error while editing 0585&0586 Infotypes in ess

    Hi Folks,
    I am getting an error while editing the 0585&0586 infotypes in ess.
    When i select the field edit it shows me the record with correct dates (Financial year dates) and when i start edidting the amounts and saving the data it was taking the current date as start date and throws an error saying
    Begin date and End date for the infotype must match financial year dates.
    A record already exists for the current financial year.
    Please help in this regard.
    Regards
    SIva

    Hi ,
    If you want to edit the Info types -0585&0586.The control reocrd and the info type start period should be in the same fincial year.
    Thanks,
    Bhaskar

  • How to Add field to Selection screen of Tx. FBL5N

    Hi All,
    In Tx. FBL5N, there is a field Customer number (on Customer selection screen).
    In addition to the above we need to add field Customer name in Selection screen.
    How do we go about it ?
    PS :- We have found steps to add fields to FBL5N output. But, we dont want it on output, we want to add it on Selection screen.
    Regards,
    Ashish

    Hi,
    Only certain table fields are allowed in dynamic selection, please see this sap note for detail :
    Sap Note 310886 - Line items: Dynamic selections ignored
    Permitted tables:
    SKA1: all fields
    SKB1: all fields
    BSIS: all fields
    So BKPF-CPUDT field is not allowed for dynamic selection.
    check this thread Add new Fields to Dynamic Selection FBL5n
    Or
    Enhancing Selection Views in the dynamic selection of some SAP transactions like FB03, FBL3N, FBL5N
    This enhancing related to SAP OSS Note: 188663 and 832997
    Requirement: The business requires the Doc. Header Text be added in the dynamic selection in SAP transactions FB03
    ■Execute Transaction code SE36. Click F4. Enter the SAP table name wherein you think the field could be found. In this case the SAP table is BKPF and the logical database is BRF
    ■From the initial screen of SE36, Choose from the path EXTRAS >> Selection Views
    ■Copy Selection View u201CSAPu201D to u201CCUSu201D
    ■Change the selection views u201CCUSu201D
    ■In the right corner, double click your table BKPF.
    ■In the right corner, check whether what functional groups does your field belong. If it is 01 then input it beside your field name.
    ■Then Save it afterwards.
    Prabhudas

  • Creating / updating Custom infotype with different screen

    Hi All,
    I have created custom infotype having different screen for different subtype(1,2).
    From Subtype 1, indotype is automatically updated as it is a standard program. But for subtype 2 i am using HR_INFOTYPE_OPERATION for updating the record which is ending with error, as employee which i am trying to update is already locked by me only through PA30. So this function module ends with Complex error. Please suggest how to update the infotype with subtype 2.
    Thanking you..
    Best regards
    Akshay

    Hi All,
    I have created custom infotype having different screen for different subtype(1,2).
    From Subtype 1, indotype is automatically updated as it is a standard program. But for subtype 2 i am using HR_INFOTYPE_OPERATION for updating the record which is ending with error, as employee which i am trying to update is already locked by me only through PA30. So this function module ends with Complex error. Please suggest how to update the infotype with subtype 2.
    Thanking you..
    Best regards
    Akshay

  • How to remove the "table control" icon in ITS based ESS screen

    Hi All,
    I have upgraded my external ITS 620 to patch level 28. Earlier we were on patch 04.
    Since then I am seeing the table control in my ESS screens (ITS Based),
    In some thread i got to know that the table control is totally redefined / modified from patch 22 of ITS.
    Is it possible that we can remove / hide the table control from the screens.
    I dont want to let the users access the "Table Settings" screen at all....can u plz tell me how to do it
    regards,
    PK

    we could not remove the table control...it seems like we can not remove it as the table control also appears in the r3 screens also..

  • How to add image to webdynpro screen . ?

    How to add image to webdynpro screen . ?

    hi,
    right click ur application and then click on create mime object.
    with Mime Objects u cn upload doc , jpeg, or giff files from our local system into the webdypnpro system .
    You can even try creating the MIME objects in webdynrpo abap .
    Right click on ur component->mime object->import
    after importing you can see that image into your component as MIME object .Now insert a UI element image into your view layout .
    Go to the source property of IMAGE element and select F4 option , u will find a window is opening with some tabs
    Select tab COMPONENT IMAGES and component name select your component .
    You will find the image which you have imported into this section just select the image and save it.
    In the transaction sicf/bc/webdynpro , u cn check your component name there you can view the mime objects created by you .
    also refer the SAP online help :
    http://help.sap.com/saphelp_crm50/helpdata/en/46/bb182fab4811d4968100a0c94260a5/content.htm
    to knw more abt mime repositories.
    http://help.sap.com/saphelp_nw04/helpdata/en/f3/1a61a9dc7f2e4199458e964e76b4ba/content.htm
    regards,
    Amit

  • Legal requirements for showing specific ESS screens in local language

    Hi All,
    I would appreciate if you can let me know if there is any legal requirements for showing specific screens in local language? I would also like to know which countries and what SAP ESS screens.
    Thanks In Advance
    Sunny

    Good luck with that. I have never seen any "list of all countries" before like you are wanting. This will typically be part of your requirements gathering and blueprinting tasks.
    Just one question....what is your "global template" for implementation and what is your scope for localization? That will dictate much of your work.

  • Remove fields on ESS screen

    Hi Experts,
    I would just like to know how can we remove (or unseen) the fields on the ESS screens. Fields below...
    1. Country of Birth (under Family Member/Dependents screen)
    2. Place of Birth (under Personal Data screen)
    Thank you.

    Hello Maria,
    Yes you can achieve through Personalization, and then do not authorize end used for changing the fields.
    Best Regards,
    Nishtha

Maybe you are looking for