Add logo and remain transitions

I have edited a video in iMovie '11 with transitions between different recordings. I now want to add a logo to the complete video in the left upper corner (transparant .png // picture-in-picture), but after adding the logo the transitions are not shown in the video anymore.
How can I add a logo and remain the transitions in the video? Hope someone can help me with it.
Chrs, Steven

You'll need to edit your XML file to add a couple of tags for a description and image.
<description>Your podcast description</description>
<itunes:image href="http://url to your 300x300 pixel .jpg file" />
Check out the iTunes spec for specifics.
http://www.apple.com/itunes/store/podcaststechspecs.html

Similar Messages

  • Customise Sap Report -- Add logo and change report layout

    Hi All,
    I have a requirement to amend sap standard report to add logo and change layout, could some one pls point me to teh right direction. Should we .1 Create a new smartfrom if yes -- how to to create smartfroms
    2. Should we create new Zreport...3. Is Adobe Interactive forms any good---- cld you please share the steps to create Adobe Ine Form 4. is sap script any good way in my situation
    Thanks
    Smith

    Changes to SAP Standard are always a bit tricky, specially if we are talking about legal reports. If the standard report uses smartform, you can change the standard form without needing a SSCR key, so no need to create a Z report or smartform even, but like every change on SAP Standard, if further changes are made by SAP through Support packages you will always have to replicate them yourself everytime this happens. I would suggest creating a new Z report by copy of standard and new Z smartform, that way you can always recurr to the standard and see what was changed and then replicate them in you Z reports.
    To create smartform, go to TCode smarforms and you can create one by copy of an existing smartform.
    Adobe Interactive forms is more complex then smartforms and unless the standard uses a print form, i would not suggest you creating one as it will envolve a bit more knowledge.

  • Please add Image and Page Transition Effects/Widgets

    Please add Image and Page Transition Effects/Widgets
    Thanks
    - Roland

    Hello,
    You can try the following:-
    1) Add a composition widget.
    2) Add text frames to the triggers to create first level of menu.
    3) To the target of trigger in first level, add another composition widget.
    4) The triggers of this new composition will be the next level of menu.
    5) You need to set the 'Show target' value to 'On rollover'
    Hope this helps.
    Regards,
    Neha

  • Payslip With Pe51 Add Logo And Generate Pdf File

    Hi experts!!
    We have the pay slip configured with PE51. It's working fine but it doesn't have logo or lines, at the moment we use pre-printed sheet when we print the payslips for the employees.
    Now we need add a logo and create the output as a PDF. To achive this I have been told that I have to create a smartform with the logo.
    How I should create the smartform from PE51 to add the company logo?
    How I can create the PDF output?
    After doing the changes, do we need customize something else to execute the correct smartform payslip from PC00_M04_CALC_SIMU?
    Kind regards,
    Julian.

    kindly check this thread
    Client's LOGO on the PAYSLIP
    Best Regards

  • Repetitive task help - adding logo and bumpers to 50+ sequences

    Is there any way to add graphic and video elements to multiple sequences, and then export? The only way I've been able to add logos and pre-roll and post-roll bumpers is by manually adding them to each sequence. I don't have Shake or any other expensive software (besides FCP), just automator, applescript, etc.
    Please help. I don't want to get carpal tunnel.

    I'm guessing the sequences are already cut...?
    One solution would be to set up a sequence (template) with your pre/post bumpers and logo(s), then drag each sequence from the browser, into the template timeline, rename that sequence and put it in a dedicated folder in the browser for a Batch Export.
    For the Batch Export select your dedicated bin in the browser, (or all the sequences in the browser you want to export if they're listed individually), then control-click on them and select 'batch export' (you can do this from the "File" menu as well.
    Check the buttons at the bottom of the batch export interface for the settings/destinations you want.
    K

  • ALV logo and footer

    Hi Group,
    Can any body help me how to add logo and footers for this code.I uploaded the logo using OAER tansaction
    when I am using REUSE_ALV_COMMENTARY_WRITE to upload
    logo its termination error.
    REPORT ZTEMPLET .
    type-pools: slis.
    data: x_fieldcat type slis_fieldcat_alv,
    it_fieldcat type slis_t_fieldcat_alv,
    x_events type slis_alv_event,
    it_events type SLIS_T_EVENT,
    gd_layout type slis_layout_alv.
    data: v_lines type i.
    data : BEGIN OF it_marav occurs 100,
    matnr like marav-matnr,
    maktx like marav-maktx,
    matkl like marav-matkl,
    ntgew like marav-ntgew,
    gewei like marav-gewei,
    END OF it_marav.
    select matnr maktx matkl ntgew gewei
    up to 10 rows
    from marav
    into table it_marav.
    x_events-name = 'TOP_OF_PAGE'.
    x_events-form = 'TOP_OF_PAGE'.
    append x_events to it_events.
    clear x_events.
    gd_layout-no_input = 'X'.
    gd_layout-colwidth_optimize = 'X'.
    gd_layout-totals_text = 'Totals'(201).
    call function 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
    I_PROGRAM_NAME = sy-repid
    I_INTERNAL_TABNAME = 'IT_MARAV'
    I_INCLNAME = sy-repid
    CHANGING
    ct_fieldcat = IT_FIELDCAT
    EXCEPTIONS
    INCONSISTENT_INTERFACE = 1
    PROGRAM_ERROR = 2
    OTHERS = 3.
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    describe table it_marav lines v_lines.
    call function 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = sy-repid
    I_CALLBACK_PF_STATUS_SET = 'STATUS'
    I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
    is_layout = gd_layout
    IT_FIELDCAT = IT_FIELDCAT
    IT_EVENTS = IT_EVENTS
    TABLES
    t_outtab = IT_MARAV[]
    EXCEPTIONS
    PROGRAM_ERROR = 1
    OTHERS = 2.
    if sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    FORM TOP_OF_PAGE.
    WRITE:/ 'Report', 30 SY-REPID, 40 SY-DATUM.

    Try this one:
    Program: ZZ_ALV_REPORT_STUB
    Author :
    Date   :
    Purpose: Report using ALV function
    Notes:
    1) Logos & wallpapers can be found in table BDS_CONN05
       with class = PICTURES
    2) Transaction OAER can be used to create PICTURES.
       Run transaction OAER with class name = PICTURES, Class type = OT,
       and Object key with whatever name you want to create.  In the
       next screen, right clicking on screen and import
                                 Revisions
    Name    :
    Date    :
    Comments:
    report zz_alv_report_stub
           no standard page heading
           line-size 200
           line-count 65
           message-id zz.
    Tables
    tables:
      ekpo,
      trdir.
    Global Types
    type-pools: slis.
    Global Internal Tables
    data:
      i_fieldcat_alv  type slis_t_fieldcat_alv,
      i_events        type slis_t_event,
      i_event_exit    type slis_t_event_exit,
      i_list_comments type slis_t_listheader,
      i_excluding     type slis_t_extab.
    Display data
    data: begin of i_data occurs 0,
            name    like trdir-name,
            clas    like trdir-clas,
            subc    like trdir-subc,
            cnam    like trdir-cnam,
            cdat    like trdir-cdat,
            myfield(1) type c,
          end of i_data.
    Global Variables
    data:
      w_variant          like disvariant,
      wx_variant         like disvariant,
      w_variant_save(1)  type c,
      w_exit(1)          type c,
      w_repid            like sy-repid,
      w_user_specific(1) type c,
      w_callback_ucomm   type slis_formname,
      w_print            type slis_print_alv,
      w_layout           type slis_layout_alv,
      w_html_top_of_page type  slis_formname,
      w_fieldcat_alv     like line of i_fieldcat_alv,
      w_excluding        like line of i_excluding,
      w_events           like line of i_events,
      w_event_exit       like line of i_event_exit,
      w_list_comments    like line of i_list_comments.
    Global Constants
    *constants:
    Selection Screen
    selection-screen begin of block blk_criteria with frame title text-f01.
    select-options:
      s_name for trdir-name.
    selection-screen end of block blk_criteria.
    selection-screen begin of block blk_params with frame title text-f02.
    parameters:
      p_vari like disvariant-variant.
    selection-screen skip 1.
    parameters:
      p_grid radiobutton group rb01 default 'X',
      p_html as checkbox.
    selection-screen skip 1.
    parameters:
      p_list radiobutton group rb01.
    selection-screen end of block blk_params.
    Initialization
    initialization.
      perform init_variant.
      perform variant_default using p_vari.
      clear: s_name[].
      s_name-sign   = 'I'.
      s_name-option = 'CP'.
      s_name-low    = 'Z*'.
      append s_name.
    At Selection Screen PBO
    at selection-screen output.
    At Selection Screen Value Request
    at selection-screen on value-request for p_vari.
      perform variant_f4 using p_vari.
    At Selection Screen
    at selection-screen.
      perform variant_fill.
    Start of Selection
    start-of-selection.
      perform get_data.
    end-of-selection.
      perform fieldcat_build.
      perform event_build.
      perform event_exit_build.
      perform exclude_build.
      perform print_build.
      perform layout_build.
      perform display_data.
    Top of Page
    top-of-page.
    Top of Page During Line Sel
    top-of-page during line-selection.
    At User Command
    at user-command.
    At Line Selection
    at line-selection.
    Macros
      define skip_1.
        write: /001 sy-vline,
                    at sy-linsz sy-vline.
      end-of-definition.
                                    Forms
    *&      Form  variant_f4
    form variant_f4 using p_variant.
      call function 'LVC_VARIANT_F4'
           exporting
                is_variant    = w_variant
                i_save        = w_variant_save
           importing
                e_exit        = w_exit
                es_variant    = wx_variant
           exceptions
                not_found     = 1
                program_error = 2
                others        = 3.
      if sy-subrc <> 0.
        message i000(zz) with text-g01.
      endif.
      if w_exit is initial.
        w_variant-variant = wx_variant-variant.
        p_variant         = wx_variant-variant.
      endif.
    endform.
    *&      Form  init_variant
    form init_variant.
      clear: w_variant.
      w_repid              = sy-repid.
      w_variant-report     = w_repid.
      w_variant-username   = sy-uname.
      w_variant_save       = 'A'. "All types
    endform.
    *&      Form  variant_default
    form variant_default using p_variant.
      wx_variant = w_variant.
      if not p_variant is initial.
        wx_variant-variant = p_variant.
      endif.
      call function 'LVC_VARIANT_DEFAULT_GET'
           exporting
                i_save        = w_variant_save
           changing
                cs_variant    = wx_variant
           exceptions
                wrong_input   = 1
                not_found     = 2
                program_error = 3
                others        = 4.
      case sy-subrc.
        when 0.
          p_variant = wx_variant-variant.
        when 2.
          clear: p_variant.
      endcase.
    endform.
    *&      Form  variant_fill
    form variant_fill.
      clear: w_variant.
      if p_vari is initial.
        w_variant-variant = 'STANDARD'.
        w_variant-report  = w_repid.
      else.
        w_variant-variant = p_vari.
        w_variant-report  = w_repid.
        call function 'LVC_VARIANT_EXISTENCE_CHECK'
             exporting
                  i_save     = w_variant_save
             changing
                  cs_variant = w_variant
             exceptions
                  others     = 01.
        if sy-subrc ne 0.
          message i000(zz) with text-g02.
        endif.
      endif.
    endform.
    *&      Form  fieldcat_build
    form fieldcat_build.
      call function 'REUSE_ALV_FIELDCATALOG_MERGE'
           exporting
                i_program_name     = w_repid
              i_structure_name   = 'TRDIR'
                i_internal_tabname = 'I_DATA'
                i_inclname         = w_repid
           changing
                ct_fieldcat        = i_fieldcat_alv.
    Modify displayed fields
      loop at i_fieldcat_alv into w_fieldcat_alv.
        case w_fieldcat_alv-fieldname.
          when 'NAME'.
            w_fieldcat_alv-hotspot   = 'X'.
          when 'MYFIELD'.
            w_fieldcat_alv-checkbox  = 'X'.
            w_fieldcat_alv-seltext_s = 'MyChkBox'.
          when others.
        endcase.
        modify i_fieldcat_alv from w_fieldcat_alv.
      endloop.
    endform.
    *&      Form  display_data
    form display_data.
      w_callback_ucomm   = 'CALLBACK_UCOMM'.
      case 'X'.
        when p_grid.
          if p_html = 'X'.
            w_html_top_of_page = 'HTML_TOP_OF_PAGE'.
          endif.
          call function 'REUSE_ALV_GRID_DISPLAY'
               exporting
                  i_background_id             = 'SIWB_WALLPAPER'
                    i_background_id             = 'SIWB_WALLPAPER'
                    i_callback_program          = w_repid
                    i_callback_html_top_of_page = w_html_top_of_page
                  i_structure_name            = 'TRDIR'
                    i_default                   = 'X'
                    i_save                      = 'A'
                    is_variant                  = w_variant
                    is_layout                   = w_layout
                    i_callback_user_command     = w_callback_ucomm
                    it_fieldcat                 = i_fieldcat_alv
                    it_events                   = i_events
                    it_event_exit               = i_event_exit
                    it_excluding                = i_excluding
                    is_print                    = w_print
                  i_screen_start_column       = 1
                  i_screen_start_line         = 1
                  i_screen_end_column         = 70
                  i_screen_end_line           = 30
               tables
                    t_outtab                    = i_data.
        when p_list.
          call function 'REUSE_ALV_LIST_DISPLAY'
               exporting
                    i_background_id         = 'ALV_BACKGROUND'
                    i_callback_program      = w_repid
                    i_default               = 'X'
                    i_save                  = 'A'
                    is_variant              = w_variant
                    is_layout               = w_layout
                    i_callback_user_command = w_callback_ucomm
                    it_fieldcat             = i_fieldcat_alv
                    it_events               = i_events
                    it_event_exit           = i_event_exit
                    is_print                = w_print
               tables
                    t_outtab                = i_data.
      endcase.
    endform.
          FORM user_command                                             *
    form callback_ucomm  using r_ucomm like sy-ucomm
                               rs_selfield type slis_selfield.
      message i000(zz) with r_ucomm.
      case r_ucomm.
        when '&IC1'.
          set parameter id 'RID' field rs_selfield-value.
          call transaction 'SE38'.
        when others.
      endcase.
    endform.
    *&      Form  get_data
    form get_data.
      select * up to 15 rows from trdir
             into corresponding fields of table i_data
             where name in s_name.
    endform.
          FORM ALV_TOP_OF_PAGE                                          *
    form alv_top_of_page.
      clear: i_list_comments[].
      w_list_comments-typ  = 'H'. "H=Header, S=Selection, A=Action
      w_list_comments-key  = ''.
      w_list_comments-info = 'Info 1'.
      append w_list_comments to i_list_comments.
      w_list_comments-typ  = 'A'. " H = Header, S = Selection, A = Action
      w_list_comments-key  = ''.
      w_list_comments-info = 'Begin of list'.
      append w_list_comments to i_list_comments.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                i_logo             = 'ENJOYSAP_LOGO'
                it_list_commentary = i_list_comments.
    endform.
    *&      Form  event_build
    form event_build.
      call function 'REUSE_ALV_EVENTS_GET'
           exporting
                i_list_type = 0
           importing
                et_events   = i_events.
      read table i_events
           with key name = slis_ev_top_of_page
           into w_events.
      if sy-subrc = 0.
        move 'ALV_TOP_OF_PAGE' to w_events-form.
        modify i_events from w_events index sy-tabix.
      endif.
      read table i_events
           with key name = slis_ev_end_of_list
           into w_events.
      if sy-subrc = 0.
        move 'ALV_END_OF_LIST' to w_events-form.
        modify i_events from w_events index sy-tabix.
      endif.
      read table i_events
           with key name = slis_ev_end_of_page
           into w_events.
      if sy-subrc = 0.
        move 'ALV_END_OF_PAGE' to w_events-form.
        modify i_events from w_events index sy-tabix.
      endif.
    endform.
          FORM alv_end_of_list                                          *
    form alv_end_of_list.
      clear: i_list_comments[].
      w_list_comments-typ = 'A'. "H = Header, S = Selection, A = Action
      w_list_comments-key = ''.
      w_list_comments-info = 'End of list'.
      append w_list_comments to i_list_comments.
      call function 'REUSE_ALV_COMMENTARY_WRITE'
           exporting
                it_list_commentary = i_list_comments
                i_logo             = 'ZMYOBJECTKEY'
                i_end_of_list_grid = 'X'.
    endform.
          FORM alv_end_of_page                                          *
    form alv_end_of_page.
    endform.
    *&      Form  print_build
    form print_build.
      w_print-no_print_listinfos = 'X'.
    endform.
    *&      Form  layout_build
    form layout_build.
      w_layout-zebra                = 'X'.
      w_layout-no_vline             = 'X'.
      w_layout-colwidth_optimize    = 'X'.
      w_layout-detail_popup         = 'X'.
      w_layout-detail_initial_lines = 'X'.
      w_layout-detail_titlebar      = 'Detail Title Bar'.
    endform.
    *&      Form  event_exit_build
    form event_exit_build.
      clear: i_event_exit[].
    Pick
      w_event_exit-ucomm  = '&ETA'.
      w_event_exit-before = ' '.
      w_event_exit-after  = 'X'.
      append w_event_exit to i_event_exit.
    endform.
          FORM HTML_TOP_OF_PAGE                                         *
    form html_top_of_page using r_top type ref to cl_dd_document.
      data:
        text     type sdydo_text_element,
        s_table  type ref to cl_dd_table_element,
        col_key  type ref to cl_dd_area,
        col_info type ref to cl_dd_area,
        a_logo   type ref to cl_dd_area.
    Split TOP-Document
      call method r_top->vertical_split
                exporting split_area  = r_top
                          split_width = '30%'
                importing right_area  = a_logo.
    Fill TOP-Document
      call method r_top->add_text
                exporting text  = 'Example of a Heading'
                sap_style       = 'HEADING'.
      call method r_top->new_line.
      call method r_top->new_line.
      call method r_top->add_table
                exporting no_of_columns = 2
                          with_heading  = ' '
                          border        = '1'
                importing table         = s_table.
      call method s_table->add_column importing column = col_key.
      call method s_table->add_column importing column = col_info.
      text = 'A key value marked'.
      call method col_key->add_text
                exporting text         = text
                          sap_emphasis = 'Strong'.
      call method col_info->add_gap exporting width = 6.
      text = '600' .
      call method col_info->add_text
                exporting text      = text
                          sap_style = 'Key'.
      call method col_info->add_gap  exporting width = 3.
      text = 'Block brick units'.
      call method col_info->add_text exporting text  = text.
      call method s_table->new_row.
      text = 'Storage Bin'.
      call method col_key->add_text
                exporting text         = text
                          sap_emphasis = 'Strong'.
      call method col_info->add_gap exporting width = 7.
      text = 'C-A-004'.
      call method col_info->add_text exporting text = text.
      call method s_table->new_row.
      text = 'Warehouse number' .
      call method col_key->add_text
                exporting text         = text
                          sap_emphasis = 'Strong'.
      call method col_info->add_gap  exporting width = 6.
      text = '200' .
      call method col_info->add_text
                exporting text      = text
                          sap_style = 'Success'.
      call method col_info->add_gap  exporting width = 3.
      text = 'marked success'.
      call method col_info->add_text exporting text = text.
      call method s_table->new_row.
      call method r_top->new_line.
      text = 'This last line is a comment in italics.'.
      call method r_top->add_text
                exporting text         = text
                          sap_emphasis = 'EMPHASIS'.
      call method r_top->new_line.
      call method a_logo->add_picture
              exporting picture_id = 'ZZTESTBMP'.
                exporting picture_id = 'ENJOYSAP_LOGO'.
    endform.
    *&      Form  exclude_build
    form exclude_build.
      w_excluding = '&GRAPH'. "Graphic
      append w_excluding to i_excluding.
    endform.                    " exclude_build

  • My Iphone 3G stopped booting and failed to start. After some time, I have restored the Iphone OS using Itunes (ver 4.2). Itunes restored it successfully, but the Iphone didn't responded and remained the same.except apple logo, nothing is displayed.

    Hi,
    I have an Iphone 3G.
    Its 9 months old mobile and it has OS 4.2 in it.
    When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
    Later I tried to restore and update the Iphone using Itunes.
    I have updated the Itunes.
    Using hard-reset, I tried to restore the OS and did the same successfully.
    After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
    when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
    I tried to reset OS twice, it remained the same.
    Can any one help me here with this issue.
    I am not even able to figure-out the cause of the problem.
    Thanks in advance.
    Bharath.

    Hi,
    I have an Iphone 3G.
    Its 9 months old mobile and it has OS 4.2 in it.
    When I am accessing wi-fi, suddenly the display went-off and then I was not able to start my phone again.
    Later I tried to restore and update the Iphone using Itunes.
    I have updated the Itunes.
    Using hard-reset, I tried to restore the OS and did the same successfully.
    After installing the same over my Iphone 3G, I didnt recieved any intimation for completion of the process, besides, I was not able to start the mobile even I have reset the OS.
    when I push the wake-up button, I am able to see the Apple Logo and after some time, it goes off and remains idle with no more display.
    I tried to reset OS twice, it remained the same.
    Can any one help me here with this issue.
    I am not even able to figure-out the cause of the problem.
    Thanks in advance.
    Bharath.

  • IMac starts with sound but remains with Apple logo and the clock running indefinetely

    After software upgrade ( from mavericks to new mavericks ) iMac doesn't start anymore. It remains always in the same mode: after the sound of start the Apple logo and the clock that runs indefinitely without the start of the software. Someone knows what to do?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.   
    There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
         a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
    Step 3
    Sometimes a startup failure can be resolved by resetting the NVRAM.
    Step 4
    If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
    Step 5
    If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
    Step 6
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Step 7
    If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
    Start up in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Post for further instructions.
    Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 10. If you ever have another problem with the drive, replace it immediately.
    If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
    If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 8
    Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
    Step 9
    Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Step 10
    Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
    Step 11
    This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
    Step 12
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

  • I'm trying to add a header beside my logo and center the header only

    I'm trying to add a header beside my logo and center the header only

    Have you got a code for your master-head?  If not try something like this:
    HTML goes like this:
    <div id="masthead">
    <div id="logo">
    </div>
    <div id="header">
      Header Goes Here </div>
    </div>
    Your CSS goes like this:
    #masthead {
    min-width: 600px;
    #logo {
    float: left;
    width: 200px;
    #header {
    margin-left:200px;
    text-align: center;
    If this not what you want then please post a link of your work you have already done so that basic CSS code can be given to center your text.

  • I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself.  What's going on?

    I created a script to add logos to photos at a club and now when I run the script, the script runs but does not actually place anything on the photo itself.  What's going on?

    He meant post it here, of course, Louie!  How on Earth would you post it "on Photoshop" ? 
    Thank you for the belly laugh. 

  • My macbook is not starting properly, remains white screen as it is with apple logo and spinning gear

    my macbook is not starting properly, remains white screen as it is with apple logo and spinning gear

    Hi..
    Your profile indicates you are running Lion v10.7 so you need to use Lion Recovery  to repair the startup disk if necessary or reinstall Mac OS X.

  • HT201559 I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

    I have tried to reset and restart my iPod touch but it remains stuck at the apple logo and turns off. The iPod is not responsive when i connect it to my computer or wall charger.

    Try:                                               
    - iOS: Not responding or does not turn on           
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable                     
    - Try on another computer                                                       
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Can you customize and add logo's to a back page or cover?

    I was hoping I could further customize a book by adding my logo and contact information to the back page or front cover (corner) of an iphoto book - any suggestions? Is it possible?

    You can do this in Aperture by saving your logo as a jpeg, and then importing the jpeg to your book...you then just place it in a box as you would a regular image.
    I'm not sure if the process is the same for iPhoto, but you could try.

  • Why is there a one-inch gap between FF logo and search engines?(I'm using FF4).

    I recently downloaded FF 4.I'm not technically savvy,and was a bit confused to see a drop down menu and the word "Firefox".
    I didn't like the new set-up and managed to delete it, in favor of the logo.
    Now,the opening page is in the background and there is a one-inch gap between the logo and the search engine.Is there a way to have a space reduction?
    F11 is NOT a resolution.

    You can make FF4 look like FF3 by doing the following.<br><br>
    * Right click a blank part of the tab bar and click "Tabs on top" to remove the checkmark. Tabs will subsequently reappear below the search bar.<br><br>
    * Repeat the same steps, but click the top one called "Menu bar". This will reinstate the text links at the top.<br><br>
    * To rearrange the layout, repeat the same steps again and choose "Customize". A panel will open and while that remains onscreen, you can move elements like toolbars, buttons etc around and place them anywhere you wish. You can also drag anything you don't like into that panel and add anything you want by dragging it out of there.<br><br>
    * To replace the status bar at the foot of the page, install this add-on: https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/<br><br>

  • Hi, have a iphone/macbook itunes prob. i connected my phone to mac to add songs, and it wiped 99% of music from my phone. on the mac it still lists the songs on my phone but they are greyed out. can anyone help? very frustrated and want my music back.

    hi, have a iphone/macbook itunes prob. i connected my phone to mac to add songs, and it wiped 99% of music from my phone. on the mac it still lists the songs on my phone but they are greyed out. can anyone help? very frustrated and want my music back.

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

Maybe you are looking for

  • Production scheduling profile

    Dear Experts, Can i have multiple scheduling profile ? Issue is that i have defined Production scheduler A and production scheduling profile A1 in material master which refer to order type A2 Now i want to create production order of same material wit

  • Error 11 when trying to update iPad1 to iOS5

    I have tried to update my iPad1 to iOS5 for the past four days but keep on getting the message that my iPad cannot be restored and gives an error 11 code.  I did not have have any issues to updating my 3GS iPhone to iOS5 prior to attempting the updat

  • Get server date, or day from server

    Hey guys, Just wondering how I can retrieve info from the server, such as day of the week for a gym timetable panel. Basically I want to have an unordered show or hide different list items depending on the day of the week. So, if its Monday, a partic

  • Discoverer Plus 10g Title & Table Viewing Size

    Is there a way to increase the screen resolution of the title and table area in Discoverer Plus 10g? The font size says 10pt, but on the screen it looks more like 4pt. I couldn't find any settings in Plus to change it. Thanks, Amy.

  • WORK FLOW - Prefix Number

    Hi Any one can u explain me about Prefix number used in work flow and where do we maintain that one in Customizing setup? its very urgent Thanks & Regards, senmani.