Add new city into existing Network metadata
i have one network data model in my database for delhi city i am using Oracle 10 g spatial. how to add one more city into existing network metadata?
If the column structure is different, how did you load the Delhi data into NDM tables ?
You have to load the shape file first and then do the required mapping to move that into the NDM tables.
Secondly, are you using the PL/SQL api to do the network analysis ? Or are you using the Java api ?
siva
Similar Messages
-
Can not add new VMS into existing clustered server pool
For some reason, we reinstall VMM (3.1.1-416) with existing UUID and rediscover all VMSs. The process went smooth and the whole system looks clean without dead objects any more. The guest VMs are all working fine. However, the new added VMS in unassigned servers are not displayed in the "Available Servers" when we want to add into existing clustered server pool, but it is shown when we add into unclustered server pool. Anyone has clue or possible way to debug what's wrong.
Thanks,
Shun-Jee LiuThe issue is resolved. The access group in shared iSCSI is not properly configured.
-
Add a RFC into existing RFC MODEL
Hello Friends,
Is it possible to add a RFC into existing RFC model, or I have to create everytime new RFC model while adding another RFC ?
Regards,Hi Shah
1) You can <b>Reimport</b> the exisitng RFC model if you want to make any changes,
Reimporting may include, adding a new funtionality, deleting exsisting funtionality, modifying , etc.
After reimporting your RFC <b>YOU NEED TO RESTART YOUR J2EE ENGINE</b>
SAP stronlgy recommends that each model live within its own separate Java Package. means you can create many models ,but while creating ,create them in different packages
Best Regards
Chaitanya.A -
How do I add time capsule to existing network?
How do I add time capsule to existing network?
Ok.. I am still confused as an Express only has one ethernet for LAN not 4. So you perhaps have an extreme..
If you have an airport extreme.. plug the TC into the extreme with ethernet.. and set it up as bridge in router.
You can also create a wireless network that works alongside the extreme.. this is the best way.
It is also possible to setup the TC to extend the wireless of the extreme.. but this will make backups much slower.. at least half the speed if not worse. -
To add new record into the table Data Service client
When I am trying to add new record into the table Employeedetails using Data Service client it is giving a sql exception: "java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1."
Code:
DataService ds=DataServiceFactory.newDataService(getInitialContext(),"EmplDetApp","ld:EmplDetAppDataServices/EmployeeDetails");
EmployeeDetailsDocument edoc=EmployeeDetailsDocument.Factory.newInstance();
edoc.addNewEmployeeDetails();
//here I set the primary key value empid
edet.setEmpid("1212");
edet.setEmpname("manu");
ds.submit(edoc);
Error
EmpName 5 java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
com.bea.ld.dsmediator.DataServiceException: java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
at com.bea.ld.dsmediator.update.JDBCAdaptor.save(JDBCAdaptor.java:247)
at com.bea.ld.dsmediator.update.DataServiceMediator.submit(DataServiceMediator.java:528)
at com.bea.ld.dsmediator.update.DataServiceMediator.submit(DataServiceMediator.java:245)
at com.bea.ld.ServerBean.submit(ServerBean.java:529)
at com.bea.ld.Server_ydm4ie_EOImpl.submit(Server_ydm4ie_EOImpl.java:910)
at com.bea.ld.Server_ydm4ie_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:492)
at weblogic.rmi.cluster.ReplicaAwareServerRef.invoke(ReplicaAwareServerRef.java:108)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:435)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:430)
at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:35)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
at java.lang.Thread.startThreadFromVM(Unknown Source)
Caused by: java.sql.SQLException: Violation of PRIMARY KEY constraint 'PK__EmployeeDetails__6383C8BA'. Cannot insert duplicate key in object 'EmployeeDetails'. Severity 14, State 1, Procedure 'PC-P41403 null', Line 1
at weblogic.jdbc.mssqlserver4.TdsStatement.processWarning(TdsStatement.java:1178)
at weblogic.jdbc.mssqlserver4.TdsStatement.parseMsWarning(TdsStatement.java:1089)
at weblogic.jdbc.mssqlserver4.TdsStatement.getMoreResults(TdsStatement.java:756)
at weblogic.jdbc.mssqlserver4.TdsStatement.execute(TdsStatement.java:210)
at weblogic.jdbc.mssqlserver4.TdsStatement.executeUpdate(TdsStatement.java:97)
at weblogic.jdbc.mssqlserver4.TdsStatement.executeUpdate(TdsStatement.java:1455)
at weblogic.jdbc.wrapper.PreparedStatement.executeUpdate(PreparedStatement.java:147)
at com.bea.ld.dsmediator.update.JDBCAdaptor.save(JDBCAdaptor.java:151)
... 15 more
But I am not sure why it is giving an exception as Violation of PRIMARY KEY.
The update method works fine for the same client.
The exception only happens when I am trying to insert a new record.
Please help me to figure out this problem.If you are absolutely sure that you do not have such a row already in your table, open a case with customer support and reference CR321312. I believe the work-around is to put ld-server-core.jar in your client classpath.
Correction: put ld-server-app.jar in the client classpath
Edited by mreiche at 09/17/2007 3:28 PM -
Add new depreciation to existing assets
hi experts
can we add new depreciation to existing assets , while creating new assets i can see the depreciation that i have created recently. but for the existing assets i want to add this new depreciation.
venkatHi
Yes u can change the depreication
but keep in mind note the date when u chnage the depreciation of existing asset
and check any invoice not pending of asset PO at the time of change the depreciation
Suppose u create a PO with asset, whc\ich is creatd ( suppose machinary rate is 10%)
then u comlete the cycle first this means invoce entry ( MIRO)
then u chnage the depreciation
if any query revert back
Regards
Roobal -
How to add new field into dynamic internal table
Hello Expert.
how to add new field into dynamic internal table.
PARAMETERS: P_TABLE(30). "table name
DATA: I_TAB TYPE REF TO DATA.
FIELD-SYMBOLS: <TAB> TYPE standard TABLE.
*Create dynamic FS
create DATA I_TAB TYPE TABLE OF (p_table).
ASSIGN I_TAB->* TO <TAB>.
SELECT * FROM (p_table) INTO TABLE <TAB>.
here i want to add one more field into <TAB> at LAST position and my
Field name = field_stype and
Field type = 'LVC_T_STYL'
could you please helpme out .Hi,
Please find the code below.You can add the field acc to your requirement.
Creating Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <t_dyntable> TYPE STANDARD TABLE, u201C Dynamic internal table name
<fs_dyntable>, u201C Field symbol to create work area
<fs_fldval> type any. u201C Field symbol to assign values
PARAMETERS: p_cols(5) TYPE c. u201C Input number of columns
DATA: t_newtable TYPE REF TO data,
t_newline TYPE REF TO data,
t_fldcat TYPE slis_t_fldcat_alv,
t_fldcat TYPE lvc_t_fcat,
wa_it_fldcat TYPE lvc_s_fcat,
wa_colno(2) TYPE n,
wa_flname(5) TYPE c.
Create fields .
DO p_cols TIMES.
CLEAR wa_it_fldcat.
move sy-index to wa_colno.
concatenate 'COL'
wa_colno
into wa_flname.
wa_it_fldcat-fieldname = wa_flname.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 10.
APPEND wa_it_fldcat TO t_fldcat.
ENDDO.
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fldcat
IMPORTING
ep_table = t_newtable.
ASSIGN t_newtable->* TO <t_dyntable>.
Create dynamic work area and assign to FS
CREATE DATA t_newline LIKE LINE OF <t_dyntable>.
ASSIGN t_newline->* TO <fs_dyntable>.
Populating Dynamic internal table
DATA: fieldname(20) TYPE c.
DATA: fieldvalue(10) TYPE c.
DATA: index(3) TYPE c.
DO p_cols TIMES.
index = sy-index.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
Set up fieldvalue
CONCATENATE 'VALUE' index INTO
fieldvalue.
CONDENSE fieldvalue NO-GAPS.
ASSIGN COMPONENT wa_flname
OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
<fs_fldval> = fieldvalue.
ENDDO.
Append to the dynamic internal table
APPEND <fs_dyntable> TO <t_dyntable>.
Displaying dynamic internal table using Grid.
DATA: wa_cat LIKE LINE OF fs_fldcat.
DO p_cols TIMES.
CLEAR wa_cat.
MOVE sy-index TO wa_colno.
CONCATENATE 'COL'
wa_colno
INTO wa_flname.
wa_cat-fieldname = wa_flname.
wa_cat-seltext_s = wa_flname.
wa_cat-outputlen = '10'.
APPEND wa_cat TO fs_fldcat.
ENDDO.
Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
TABLES
t_outtab = <t_dyntable>. -
I am unable to add Data element into existing Data Type
Hi Experts,
I am unable to add Data element into existing Data Type, It shows disable mode, suggest me this..
ThanksYep got it...
Edited by: Manoj on Aug 20, 2008 1:09 AM -
I want to add new mac to existing wired and wireless network
I have a imac 400mz connected (ethernet) to a network - CABLE Modem to Balkin 5.4 G Wire/Wireless router. I have 2 wintel machines hard wired, plus 1 via Motorola PCIMA wireless. I want to add either of the following new Apple products -
mini mac or imac 17 - both have Airport extereme installed. OK how do I get the new apple on to the existing network.
Please adviseOn the Mac - click on the Airport menu icon located near the right side of the MacOS menu bar at the top of the screen. A list of all in-range wireless networks will appear. Click on the name of your wireless network to connnect to it. If your wireless network is protected by WEP or WPA security, the Mac will prompt you to enter the key. That's it!
-
My wife and I just got our iPhone 4S a couple weeks ago. We've experienced a problem that I hope someone might be able to help with. When she sync'd her photos originally, it had them in the folders she wanted. Now, if she wants to add new photos to one of the existing folders, will it jumble all the photos up or will it keep them in the same folder?
drag them from an event or album to the book project under keepsakes
You really should take the tutorial - under the help menu ==> iPhoto help ==> chapter 7 - making a book - read the help topic and watch the movie
LN -
How to add new infoobject to existing cube or dso?
Hi all,
Can we add new infoobject to exixting cube in BW 3.5 ver? if yes how can we add? Please provide me steps.
Thank you.
SunilHi Sunil,
If you want to add new info object to the IC or DSO which is already holding data - then you need to make a copy of that particular DSO/IC and load the data into dummy.
Now delete the data from the IC/DSO to which you want to add the new info object. once the data is deleted it will allow you to add new info object to you IC/DSO.
save it and activate the IC/DSO
load the data from Dummy DSO and from new run on wards the newly updated info object will also get updated(historical data will not be updated if its newly added to DS as well).
If you want the historical data for the newly added field then you need to drop the compelte data and need to extract from source.
Note: You can't include the new info objects are change the existing info objects if there is data exist in the IC/DSO
Regards
KP
Edited by: prashanthk on Dec 31, 2010 10:54 AM -
How do you move new photos into existing albums?
On an iPad how do you move a new photo into an existing album?
Or, from the camera roll:
Tap Select (upper right hand corner)
Tap the pictures you want to add to an album (you'll see a check mark in each selected photo)
Tap Add To (upper left hand corner)
Your albums will appear and touch the album you want to move the picture to and they'll go there
Note: They will stay in your Camera Roll as well -
How to add new class to existing DC (Web Dynpro project)
Hi,
How can I add new class to an existing DC (Web Dynpro project)?
I tried adding it using File - New - Other - Java - Class, but after a build of the DC the new class (and its contents ) was completely removed.
Then I created a new DC (java project) and created a new class in that DC. This went fine, but I got into problems because of circular referencing between the new & the old DC, so no build was possible.
This can't be difficult, does somebody knows how to do it?
My temporary solution is to add the classdefinition to an exisiting .java file. Very ugly.
Thanks,
JeroenHi Jeroen,
where did you create the class? If the *.java file is placed in the src/packages folder it should not be deleted by a build. (I suspect you created it in the gen_wdp folder?)
Regards,
Marc -
How to add new codes into SAP Query/Infoset
Hi Experts,
First time working with SAP Query.
I need to enhance an existing Query to add a new field into a report. I have added new tables into this Infoset and joined my new tables with existing tables and able to extract the new fields out on the report. But here are my problems:
Example of original output:
X88888 500000
X99999 400000
Example of new output after adding my 2 new tables to get 1 new field to output:
X88888 50000 01/08/2009
X88888 50000 01/25/2009 <--- for X88888 customer, I want only this record w/ latest date to be output
X88888 50000 01/22/2009
X99999 40000 03/09/2009
X99999 40000 04/18/2009
X99999 40000 04/19/2009 < -- for X99999, I want only this record w/ latest date to be output
Where/How i can add the code to control this logic so that only 1 record per customer with the highest date can be output. I looked at the query program and it looks very confusing and hard to understand.
Please advise,
Thanks,
SamHi Sam,
Instead on adding new table/tables , better way to use Direct Read from your single table.
Please read the below steps to suffice your requirement.
Assumption: Let your original table be A and second table is B.
Tables A and B are having field X1 and X respectively, using these fields, they can be joined.
You want field date1 of table B.
Infoset Changes:
1. Go to SQ02 (Enter Infoset name, click on Change button)
2. Create an extra field E_date of type date (Sy-datum), by clicking on 'Extras' (F5) button.
3. Select that field in one of the field group of your Infoset.
4. Click on Code Icon (Shift+F8) displayed on application bar, you will be getting lists events in 'Code section'.
5. In Data Section , declare an internal table like below code (here pseudo code)
data: begin of itab_date occurs 0,
date1 like B-date1,
end of itab_date.
6. In Recod processing Event write the following code.
CLEAR itab_date.
CLEAR E_date.
SELECT date1 FROM B into table itab_date " Retrieving date field from table B
WHERE X = A-X1.
Sort itab_date by itab_date-date1 DESCENDING. "Sort internal table B in decendind order on date1
READ TABLE itab_date index 1. "Read first record of interanal table
E_date = itab_date-date1 "Assigning top most date of internal table into field E_date.
7. Generate the Infoset
Query changes
1.Go To SQ01 (in a new session),
2.Give your Query name, click on change button, and select that field group in which you have added extra field.
3.Select extra field.
4.Go to basic list to select that field in your O/p list.
5.Click on Test button, and see if you are getting desired result.
Please let me know if you need further details.
Regards,
Dinesh -
How to add Jsp pages into existing portal (JDeveloper 9.0.4)
I am a jsp developer. I have to add a jsp page into existing portal. I am new to portal. Could anyone help me how to develop jsp using portal classes like PortletRenderRequest,ProviderSession and others.
Rigoberto, there should be no space between "-Xbootclasspath/p:" and the path "C:\oracle\infra\jdbc-10.1.0.4\ojdbc14.jar;C:\oracle\infra\jdbc-10.1.0.4\orai18n.jar"
By the way, one can always take a look at the logs at
$ORACLE_HOME/opmn/logs
especially those files whose names start with OC4J~ if there is some wrong with oc4j processes. Those files are the default oc4j stout and sterr. If oc4j can not init, there should be some kind of error message in them.
By the way, the following line may be deleted since no property file is specified.
<data id="oc4j-options" value="-properties"/>
Hope this helps.
Maybe you are looking for
-
Records not visible in SE16N are shown in SELECT
Hi, I have a select statement, without any restrictions/conditions on the table ERDK.This fetches some records. But when I try to get the same records through SE16n or SE11, it says no data found. Any idea why. Because I dont want the records to show
-
Can I send mp3/ringtones from my macbook to my samsung a737 phone?
I just got a new cell, a Samsung a737. I can't trust any of the "free ringtones" sites b/c of course they are all scams. Is there a way to use bluetooth to send audio files to the phone? If I get the USB data cable for this phone, is there a way to p
-
I have the Reader on a Win7 system to my right displaying the document in color. In front of me, on an iMac the same doc is in B&W!??? Any help would be appreciated. Chuck
-
Getting M300 to use external monitor before internal LCD
Hi there, I have an M300 which is plugged in to a port replicator which has an external monitor attached. If you remove the M300 from the replicator before shutting down, the next time you put the M300 in the replicator and boot up the image is only
-
How to determine who has activated Office 365 ProPlus?
Is there a way to see who a copy of Office 365 ProPlus has been activated by, without logging into the user's Office 365 portal? Does this get tracked in some report, or some registry key? Thanks.