Add new F4 (searchhelp) for material in sales order

Hi there!
I read the following related poste:
customisation of F4 for material in sales order
In that post Atul wanted to change an existing search help. My problem is differnet I think.
What I have:
In VA01 I have many different SearchHelps for the material: 9 standards and 2 from my serviceprovider. The standards have shortcuts M, A, H, K, L, N, O, P and S. The two custom ones have 2 and Y.
in MM03 I have even more different SearchHelps for the material: maybe 23 standards and 3 customized ones. The standards have the shortcuts M, A, B, C, E, F, H, I, J, K, L, N, O, P, R, S, T, V and W (then one without ?!?), then G, U. The custom ones are 1, 2, 3, Y.
I now want to use the searchhelp (for example) "I" (in german its "Artikel zur Liefarentenartikelnummer", so I think its about "Material from suppliermaterialnuber" in english) that I can use in MM03 as well in VA01.
Where do I have to customize / program things to do so?
Thanks in advance!

Works!
I had to include the Searchhelp MAT1I into the section "included searchhelps" of searchhelp SD_MAT1 within transaction SE11 and run the default parameter assignment (Button).
I know it was MAT1I because I looked it up in Searchhelp MAT1_A... just to round this ticket for maybe the next readers.

Similar Messages

Delivery Completed for Material in sales order....

Hi Experts,
I want to know the table for Materials of sales order which are completed delivery.
e.g. : Order Qty. 5 Nos.
        Delivery Qty. 5 Nos.
     ================
      Balance is 0.
Pl. waiting reply.
YAB

Thanks Prabhu,
YUSUF

How to Update the New Condition values for list of sales orders

Hi
Client requirement is they have set of old Sales Orders to be executed. But the material prices have been revised in the meantime. Now they want to update the current prices in the sales order before proceeding further.

Hi,
Though Lakshmi suggested you the right option, it may not be carried out for Sales Documents in random and will be much suited for Sales Documents with continuous sequence like 00010, 00011, 00012, 00013, etc.
If you want to New Pricing to be carried out for Specific Lists of documents like 00010, 00017, 00043, 00057, etc, then you can do by following option:
Go to Transaction "MASS", Select the Table - VBAK and Field - PRSTD and proceed by entering the Sales Documents Lists to carry out New Pricing.
Hope this will be helpful to you.
Rgds,

Customisation of F4 for material in sales order

dear all,
while creating a sales order, when i enter material in line item, i want to customise search i.e. F4
i want to search material on two criteria at a time
1) material type
2) material group.
please give solution

Hi,
TO get this as per your requirement,
First create a elementary search help through se11.
In the elementary search help, give the selection method as MARA , select the dialog with value restiction.
The search help parameters as MATKL and MTART.
Lpos and SPOs as 1 and 1 ( For MATKL)
2 and 2 For MTART.
Save and Activate it.
Now in SE11 Give the search help name as MAT1_A and click on change.
Click on Ok in the next dialog box.
Go to the tab Included search helps. Click on Add button ( + button ) and give the created search help ( Zsearch help name) there.
Save and Activate it.
Now check for Material anywhere , you will find an extra tab as your custom tab.
Regards,
Sai

Difference between cost center for material and sale order

Hi,
I'm having an issue related to profit center. Our business of Reverse Logistics Process is taking the wrong profit center which should be taken from sale order master data, not from material master data as currently. As a developer, I'm confused the definition of profit center in this case. What are the differences between the profit center defined in sale order and in material ?
Thanks,
Paulb

Hi Paul
SAP allows you to change the PC in the sales order... If you dont change, it adopts the PC from Mat Master
You can define substitution of PC for sales order in 0KEM and assign them in 0KEL... You can change the PC based on Sales Org, Dist Channel, Division, etc
For a more complex logic, you can also use an exit
br, Ajay M

Wrong Gross Weight for Material in Sales Order at Item Level (Shipping Tab)

Dear All,
Except MMR, where we maintain gross weight for material?
Or, from where Gross weight gets detrmined in Sales Order at item level (Shipping Tab)?
Details,
I've 2 Materials in Sales Order, Mat1 and Mat2.
In both the MMRs, Gross weight is 1.080 Kg
In sales Order Mat1 has Qty 18,000 Kg and gross weight is 19,440 Kg --> which is right.
Mat2 has Qty 2,160 Kg and gross weight is 2,332,800 Kg --> which is wrong.
I tried with maintaing another line item with Mat2 in Sales Order, for which again wrong gross weight is calculated.
I also tried with creating another Sales Order with Mat2, and again the same problem.
Thanks for your help, in advance.
Regds,
Yogi.

Hi,
Thanks. That has already been checked by me, in Basic data1 --> Additional Data --> Unit of measurements
everything is maintained correctly.
What I have noticed is:
Instead of obtaining Gross weight as 1.080 (which is maintained), somehow system is picking 1,080 (don't know why and from where)?
Regds,
yogi

Retrieving Characteristic Values for Material in Sales Order

Hi,
I'm trying to create a program which allows me to extract the characteristic values of a configurable material in a sales order. I need to know which tables are used and how they are linked. Thanks

CALL FUNCTION 'VC_I_GET_CONFIGURATION'
    EXPORTING
      instance      = vbap-cuobj
      language      = 'K'
      print_sales   = 'X'
    TABLES
      configuration = ex_tkomcon
    EXCEPTIONS
      OTHERS        = 4.

No serial no for material in sales order

Hi experts,
WE ARE UNABLE TO PREPARE THE CHALLAN DUE TO M/C SL.NO.NOT SHOWING IN THE SODS.PL HELP.
where we will find this mistake and how to asiign serial no for the material
Regards
madhu

its solved

MRP creating additional purchase requisitions for the existing sales order

Hi,
We have scenario where we switch materials from POD material to ARP material. POD material is just like make to procurement which creates purchase requisition and purchase order upon saving the sales order. ARP (Auto replenishment) material creates purchase requisition based on sales order and re-order point while running MRP.
When the material is POD title, it created purchase requisition and purchase order (example: 4500000110) while saving the sales order (example: 1000000010) for the quantity 10. After some time this material is switched to ARP and it has open sales order (1000000010) and purchase order (4500000110).
We have special MRP run for ARP materials based on MRP type, which creates purchase requisition.. What is happening is when we run MRP; it is creating new purchase requisition for the old sales order (1000000010) for the quantity 10. But old sales order (1000000010) is already having purchase order (4500000110) to fulfill. So we donu2019t want to create new purchase requisition for the old sales orders. It should create purchase requisition only for new sales orders.
Please advise
Thanks in advance
Srinivas

Mangesh,
If the components are Inhouse production then you can think of using collective orders by assigning special procurement key 52. If raw material exists then your requirement cannot be met..as i think your scenario is of assembly processing. The idea of assembly processing is that component materials will always be available and only assembly will be done based on Sale Order.
Regards,
Prasobh

Add new company (subscriber) for partner application

Hi
I want to add new company (subscriber) for partner application that is accessible from portal.
and I want to get username , password , company in login page and change the login page to accept 3 parameter but I don't know what is the next step . and where can I define my company and define user for the company .
Thanks
Roshanak

Hi,
1. Get info regarding the chart of accounts. It forms the basis for FI\
2. Though automatic postings are not regular, check the required details for configuration for APP. If you are going for APP, u need to check house bank also
3. Check the tax procedures (Varies between countries) - Sales Tax and Withholding tax config
4. Payment terms
5. Discount received / paid configurations
6. Dunning details - Check if existing standard SAPscripts will suffice ur needs. Else u may need the help of ABAPers
Regards,
Sridevi
<i><b>Award points, if useful</b></i>

Creation of New T Code for Material Master

HI,
I have to create a new T Code for Material Master Change i.e. for MM02, with writing restrictions to few fields. How to achieve this?
Thanks and Regards,
Hari Prasad.

Hi Hariprasad,
If restricting certain fields using field selection option is not suitable for you, you can go ahead with the option Screen Variend
Also refer the link
[https://wiki.sdn.sap.com/wiki/display/Snippets/Transaction%20Variant%20-%20A%20Step%20by%20Step%20Guide%20for%20Creation]

Lock characteristic value for configurable material in Sales Order

Is there a setting in SAP which can prevent user changing characteristic value for configurable material in Sales Order after production order created for this Sales Order? Currently, it can only works when first delivery create for this Sales Order.
Thanks a lot.

Hi,,
in the characteristic goto additional data tab,
you have a field called not ready for input.
you select this when the value in this characteristic come by calculation based on the previous selection.
that field will be greyed out.
OR
u can even select the no display check box,
by selecting this u cant see the characteristic in the list,, it will give u a popup before leaving the screen.
for this the char has to be a required field.
OR
if any of this is not working then may be u can try out with authorization management.
thanks

How to block material for a particlar sales order

Hello Gurus
How to reserve a material in sales order level for a given quantity in sales order
If we do availability check for that material it should not show in unrestricted stock and it should show in reserved stock
Looking for your inputs
Regards
Venkat

Hi Lakshmipathi,
It should happen for every sales order not only one order , when ever i create sales order for particular material , quantity it should reserve the stock for that order after doing availablity check and one more thing is once the stock is reserved it should be be show in unresricted stock
Thanks for your useful information and i have checked in system , all the requirement you have mentioned are there in system.
Looking for more inputs
Regards,
Venkat

Webclient Interaction record for R/3 sales order

Hi,
we need to capture the interaction record for each and every call related to order. we don't want to use the webclient or pcui sales order becuase of their limitations... we want all the feature of R/3 sales order like extended material search, purchase order type.... kind of fields and search help on them.
so what is the best way to approach if we want the order to be created in R/3 and capture the interaction record? would a regular BOR call from webclient for R/3 Sales Order would do it?
thanks,

I would suggest we still use the Interaction Record Functionality in IC Web . So thi is what I am suggesting :
1. Customer calls in for placing a Order
2. CSR receives the call ( CTI ) and Confirms the Account . Once Clicked on Confirm , you can auto navigate to Interaction Record View
3. CSR can capture whatever details , INtereaction Record Specific ( Like IR Type -> Order etc ) , and Save to create the IR .
4. Once Saved , You can dynamically make available , Button or Navigational Link 'Create Order' ( Will Only appear if IR Type is 'Order' etc ) .
Now Clickin on Create Order , you have different options
i) Launch into ECC ( VA01 ) using Transaction launcher to Create the Order
ii) If you are on CRM 5.0 , make use of the new CRM Sales Order Creation ( This Basically provides a very Intuitive BSP View , however the Orders are getting created in ECC Itself , No Replication required )
Hope this helps.

New condition in pricing procedure in Sales Order

Dear SAP Gurus,
I want to add one new condition in pricing procedure in Sales Order.
Earlier we were having following conditions.
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU    (Education tax)             3%(on ZSER)
ZEDT                                        100% sub cond on ZEDU
Now I want the structure to be
PR00   (price)                           1000 Rs     (say)
MWST                                     100%    sub cond.
ZSER (service tax)                   12%
ZSRT                                       100% sub cond on ZSER
ZEDU (Education tax)               2% (on ZSER)
ZEDT                                        100% sub cond on ZEDU
ZHED (Higher Edu. Tax)             1% (on ZSER)
ZHET                                        100% sub cond on ZHED
For this I have Done following Customizings
Created new Condition Types (ZHED & ZHET ) by Coping from ZEDU and ZHET respectively.
Maintained pricing procedure with these conditions.
Made condition Record for ZHET through VK11.
But I am not able to set ZHED as 1 %
Please guide where to configure this and how ?
Thanks & Regards
Rajesh

Hello,
Have you maintined the calculation type of the condition type ZHED as A - Percentage ? If no, then maintain the same. If it is already maintained, then let us the error when you are trying to maintain the condition record as 1%.
Prase

Add new F4 (searchhelp) for material in sales order

Similar Messages

Maybe you are looking for