Add Number to Harddrive Name?

I've always been curious as to why OSX changes the name of my harddrive
every now and then, adding the next integer to the name. My network name
changed from Alex to Alex 2 and is now up to Alex 6. Restoring the system
doesn't seem to do anything. It doesn't seem to affect anything, since the HD
on the desktop is still named Alex. It just shows up in various control panels.
Also, as a side issue, my harddrive icon disappeared and I've had to replace it
with an alias icon. Another trivial issue, but curious nonetheless.
Any ideas?
Mark

Great! Thanks!
And one more: Every now and then, my airport menu bar icon/drop-down goes
away and is replaced by "No Airport card installed", even though it's a macbook pro
with the card built-in and is operating fine. I've restored the system and repaired
the drive and permissions, and this symptom still comes back. It seemed to start
after I re-installed Unsanity's Windowshade X, but after restoring the system to a
prior version from TimeCapsule, it still comes back.
Any ideas?
Mark

Similar Messages

How to add increment number to file name properly

Hi, all:
I have a simple question. As shown in the attached code, I need to add an increment number to file name and save the file. The problem is, if you run the code and put something like ".dat" in the extension name, you will see a blank space between the number and the dot in the file name. What should I do to eliminate the blank space? I can't specify the format of the file name since the file name would vary from case to case.
Thanks a lot for any suggestion and correction in advance.
Attachments:
temp.vi ‏11 KB

Hi,
Please take a look to the attached VI. I hope that I understood what you really want.
I've replaced the Vi: Format into string with Number to Decimal String plus a Concatenate String.
Now, this is working for me, I don't get a space anymore. If something is wrong, please let me know.
Regards,
Paul
Attachments:
temp_back.vi ‏11 KB

Add number of business days to date field

Hello, I noticed that there is not much discussion in the forum surrounding u201Cbusiness daysu201D so I hope this post/discussion/solution contributes to the content of this forum.
I am using the following 3 formulas to try to Add number of business days (based upon a table field) to a specified date:
1. Variable name = SetVar
//Set Variable for Add Business Days:
DateVar Array Holidays;
DateVar Target:= CDate({TMS_MOVEMENT_EVT.EVT_DATE}); // Put your field name in here
NumberVar Add:= {DTCI_DOD_TRANS.TRANS}; // put the number of days here to add (a positive number)
NumberVar Added := (0);
2. Variable name = AddBizDays
//Adding Business Days:
EvaluateAfter({@SetVar});
WHILE Added < Add
Do (target := target +1;
    if dayofweek (target) in 2 to 6 and not (target in holidays)
        then Added:=Added+1
        else Added:=Added);
Target
3. Variable name = HOLIDAYS
//Holiday Array Formula for the report Header:
BeforeReadingRecords;
DateVar Array Holidays := [
Date (2003,12,25),   // you can put in as many lines for holidays as you want.
Date (2003,12,31)
0
I am successfully getting my data needed to make the necessary calculations and variable assignmentsu2026 I believe that my ISSUE is that I am not sure where to place these formulas into my report so they assign the variables and execute properly when previewing my report. I am curious if that is my issue, and if so, can someone provide me direction on where to put each of these formulas in my report.
Currently, when I try to preview the report, I get the following Crystal Reports Error: -u201CA number, currency amount, Boolean, date, time, date-time, or string is expected here.u201D
Then Crystal automatically opens the AddBizDays formula and highlights the word added, see below RE: u201CWHILE Addedu201D
For reference, my report has 3 groups, and I am displaying all of my output information (and locating my formulas) in the group footer #3 report section. I have moved them around to other report sections/groups/placements, but to no success.
Thanks so much.
Best, Matt

I worked this out... FYI - for the benefit of all forum users:
ADDING BUSINESS DAYS TO A CERTAIN DATE (excluding weekends and holidays)
1. Variable name = AddBizDays
//Adding Business Days:
WhileReadingRecords;
DateVar Array Holidays;
DateVar Target:= CDate(); // Put your field name in here
NumberVar Add:= ; // put the number of days here to add (a positive number)
NumberVar Added := (0);
WHILE Added < Add
Do (target := target +1;
    if dayofweek (target) in 2 to 6 and not (target in holidays)
        then Added:=Added+1
        else Added:=Added);
Target
2. Variable name = HOLIDAYS
//Holiday Array Formula for the report Header:
BeforeReadingRecords;
DateVar Array Holidays := [
Date (2003,12,25), // you can put in as many lines for holidays as you want.
Date (2003,12,31)
0
...too bad i don't get forum points for sharing this solution.
Special thanks to KenHamady.com -- for sharing this solution.
Sincerely,
Matt

IOS 5.0.1 messages show phone number instead of names

after the iOS 5.0.1 update, all my incoming and outgoing messages show phone number instead of names even though i have them in my contacts.
i tried deleting previous messages, and restarting a new outoging msg to a specific number but when i start a new msg, after i add the contact, and i send it, it'll show the number instead of the person from my contact.
anyone else having this issue and any possible solutions?
also the number show up as +1 (951) XXX - XXXX
+1 (area code) then the number.... instead of the name of the person in my contact.

i went to the apple store and the tech told me the following:
make sure you backup your photos, contacts, etc.
the problem she said is due to a corrupt file for some iphones4s.
1) sync your iphone with itunes
2) do a restore and restore with a "new phone" instead of from backup
3) your phone will be reset, but you'll have all your apps.
after doing all this, your contacts and message should sync up.
hope this helps.

Display Asset super number & asset super name field in AR02 report

Hi Expert,
Customer requirement is to display asset super number & asset super name field in AR02 report. When we execute the Asset History Sheet report, we are not able to display these to field (Asset super number & asset super name). If any option available regarding this to add these field in layout, please assist.
You can see in below screen shot
AR02
Thanks & Regards
Rajesh

Hi Raj,
You can create your own sorting varaint which you choose at the time of report execution. Currently you have chosen 0001.
Define your own varaint In OAVI and define the field you reuire for output select in AR02 , it will show the field in layout.
Hope it would help you.
Regards
Pankaj P

When i tap a name in favorites it uses the number from the name below the one i want

when i tap a name in iphone favorites it uses the number from the name below it

Try this:
First, turn FaceTime off in Settings>Phone. Then, delete all of your favorites entries. Next, turn FaceTime back on, then add all of your favorites back.

Need to add number of days to users end date.

Hi,
I have a code where we are adding number of days(30) to current date and then updating user's end date in IDM DB.
Now we have a requirement where we need to add number of days(30) to existing end date of user instead of adding to current date.
*public String incrementDate(int daysToAdd)
     // Start date
     log.info("NotifyLastDayOfService::incrementDate(): Enter");
     SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd 00:00:00");
     Calendar c = Calendar.getInstance();
     c.add(Calendar.DATE, daysToAdd); // number of days to add
     String newDate = sdf.format(c.getTime());
     log.info("NotifyLastDayOfService::incrementDate(): Exit");
     return newDate;
Have any body implemented this scenario?
Please suggest.
Thanks,
Kalpana.

Hi Nayan,
Here is the code:
System.out.println("----inside increment date method-----");
          HashMap<String, String> hm = new HashMap<String, String>();
          HashMap<String,Date> modifyMap=new HashMap<String,Date>();
          SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd 00:00:00");
          tcResultSet usrList = null;
     String enddate = null;
     hm.put("Users.Key",usrKey );
     try {
     usrList = this.usrIntf.findUsers(hm);
     usrList.goToRow(0);
     Date endDate =usrList.getDate("Users.End Date");
     System.out.println("-----users end date-----"+endDate);
     String userEndDate=sdf.format(endDate);
     System.out.println("-----String value of users end date-----"+userEndDate);
     Calendar cal=null;
     System.out.println("-----Calender date-----"+cal);
     cal.setTime(endDate);
     System.out.println("-----end date-----"+endDate);
cal.add(Calendar.DATE, Integer.parseInt(daysToAdd)); // number of days to add
Date newEnddate = cal.getTime();
System.out.println("-----new end date-----"+newEnddate);
//usrList.setEndDate(Edate);
modifyMap.put(userEndDate,newEnddate);
usrIntf.updateUser(usrList, modifyMap);
System.out.println("updated user's end date in OIM DB");
//System.out.println("-----updated user's end date in OIM DB-----");
logger.info("NotifyLastDayOfService::incrementDate(): Exit");
     System.out.println("-----new date-----");
     } catch (tcAPIException e) {
     logger.error("Error in finding end date for user" + e);
     } catch (tcColumnNotFoundException e) {
     logger.error("Error in finding end date for user" + e);
In th log file, I can see that the code is not executing this line:
cal.setTime(endDate);
end date is of type Date and stores users end date from DB. Please help in resolving this issue.
Thakns,
Kalpana.

How can i do if i want to add number to the filenames of my pic in my macpro

how can i do if i want to add number to the filenames of my pics in my macpro? if someone can help

You could look into utilities like A Better Finder Rename or similar apps on the page I linked to.

Is it possible to add number of days to date?

I am working on a form where I need to add number of days to a date and come up with a date.
Header 1
Header 2
example date: March 1, 2013
+ 30
= march 31 2013
1. is this possible? Header1/cell 1 is a date field. Header 2/cell 1 is a dropdown field (30, 60, 90,120, custom),.
Header2 cell2 not sure what field to use date or text?
thank you

Never mind I figured it out. Thanks

How to assign a unique number to the name column of a document set?

How can I assign a unique number to the name column of a document set preferably with workflows? (Perhaps this number can increase by one each time a new document set is created)
When a user attempts to create a new document set, this unique number should be already there as the name of the document set.
(However, It seems that access and edit the Name column is more tricky than the other columns)

Hi，
To use document ID instead of Name column, you can
Modify View and hide Name column. Then make Document ID to display at the left column.
By default, document ID will be assigned to both document items and document sets. You may
experience delay before you can see document ID assigned to existing document items and document sets because the scheduled document ID assignment timer jobs haven't finished yet.
Miles LI TechNet Community Support

Specific part number of decription/name of adapter required to use my iPad Air to my PNY High Performance 64GB High Speed microSDXC Class 10 UHS-1 up to 40MB/sec Flash Memory Card -P-SDUX64U1-GE-A

Specific part number or decription/name of adapter required to use my iPad Air to a PNY High Performance 64GB High Speed microSDXC Class 10 UHS-1 up to 40MB/sec Flash Memory Card -P-SDUX64U1-GE-A

I think you need this.

Move Excel file to Archive and add timestamp to file name

I have SQL Server 2012 and using Excel Source and OLE DB Connection to import Excel data to DB.
Currently file is located on C:\\Excel\filename.xlsx. I'm using File System Task to move file to C:\\Excel\Archive\filename.xlsx after Import Task.
Now I would like to add timestamp to file name after moving file to archive. I would like to modify file name as C:\Excel\Archive\filename_timestamp.xlsx
How to add timestamp to filename?
Kenny_I

Hi,
here you go with example
http://consultingblogs.emc.com/jamiethomson/archive/2005/09/14/SSIS-Nugget_3A00_-Move-and-rename-a-file-in-one-operation.aspx
thank you
Aamir
http://sqlage.blogspot.com/

Getting PO number as file name when getting output as pdf file

Hi Experts,
Is there any possibility to get PO number into file name (instead of spool number) when getting output as pdf file.
Since I'm printing POs in batches (as pdf) it is too difficult to find exact PO among all the pdf files.
If PO number maintained as file name, would be great time saver for me.
Thanks
Kamal

Hi,
Please check the below link..
Number ranges for Spool Requests
hope it may help you
Kuber

ORA-01555: snapshot too old: rollback segment number 3 with name "_SYSSMU3$

A Materalized view is scheduled to update every 12 hours . When it has tried to update it has thrown the error ...
ORA-12008: error in materialized view refresh path
ORA-01555: snapshot too old: rollback segment number 3 with name "_SYSSMU3$"
too small
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 803
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 860
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 841
ORA-06512: at line 1

Hi,
Can you increase the size of the UNDO Tablespace ?
For more information, you can find on this link below:
http://forums.oracle.com/forums/search.jspa?threadID=&q=ORA-01555&objID=c84&dateRange=all&userID=&numResults=15
Cheers

Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

Hi all when I send a text to a contact (iphone4s) the contacts name changes to a phone number and the name is lost. I then have to resave it again, googled it but can't see anyone with the same issue, any ideas ?

There is another setting for "Start Conversation from", that needs to be set to phone number.

Add Number to Harddrive Name?

Similar Messages

Maybe you are looking for