Add-On behaves strange on different clients !

Hi all,
I created an add-on and tested it on a "Windows 2000 server" installed client and works perfect. It also works on a client with XP Pro Turkish SP2, .Net 1.1
BUT it behaves strange on different clients e.g
Client 1 (XP Pro Turkish, .Net 1.1)
+*Add-on setup screen appears, installation ends succesfully
*Files are copied in Sap Manage/Sap Business One/AddOns folder.+
But
1- The green status bar confirmation doesn't appear .
2- Add-on isn't listed under Add-On Manager menu point.
So I can't run the add-on anyhow, even it's configured as automatic.
Client 2 (XP Pro English SP2, .Net 1.1)
+*Add-on setup screen appears, installation ends succesfully
*Files are copied in Sap Manage/Sap Business One/AddOns folder.
*The green confirmation appears in status bar.
*Add-on is listed under Add-On Manager menu point and I can start the add-on.+
BUT the add-on doesn't work , I mean it doesn't do what it should normally do, e.g. add 2 submenus in main menu, etc.
For all these add-on installations I use the same Add-On setup ard and exe files.
Any help/tip would be greatly appreciated,
Gü

Hello there
We have finally succeeded in solving the Menu creation problem.
I hope you have the same issue as we, so I will be able to help you.
Just to make sure...
We have developed an add-on composed of some menues and after installing it, we noticed that in some stations, the menu was not creaed, though the add-on showed that It was connected.
Actually the problem is that the application doesnt succeed in connecting to the DI.
our "add menu" method was called after calling to "company.connect()"
whice was stuck during the try to connect to the company.
thus- it never arrived to the "add menu"
What you should do is, go to a working client:
1. start --> ran
2. %temp%
you will find there a directory called: SM_OBS_DLL
copy it, and replace it with stations that dont work.
3. It should solve the problem.
rgds
Hagai

Similar Messages

PowerShell CSV script behaving strangely with different keyboard language layout

Hello all,
OK kinda stumped on this one. I have written the below simple script that takes a group and outputs its members to a CSV file. However, the script is not outputting correctly when it is run under a different keyboard layout, in this case a Norwegian
keyboard layout ("For" loop doesn't serve any purpose in this trimmed script version but was left in as this was the script that was tested):
cls
import-module ActiveDirectory
$group = "Group1"
#grabbing all of the groups properties so they can be referenced easily when needed (reduces multiple calls to AD)
[array]$members = get-adgroupmember $group
$Report = For($i=0;$i -lt $members.count;$i++){
#When processing the first member in the group, output this way
If($i -eq 0){$Table = @{`
"UserID"=$members[$i].SamAccountName;`
"Type"=$members[$i].objectclass
#When processing all other members of the group, output this way
Else{$Table = @{`
"UserID"=$members[$i].SamAccountName;`
"Type"=$members[$i].objectclass
#Create the table using the above output
New-Object psobject -Property $Table | select 'UserID','Type'
} #end of $Report and "for" loop above
#Export the table to CSV on the user's desktop
$Report | export-csv C:\Users\$env:Username\Desktop\$group.csv -NoTypeInformation
#Open the CSV file we just created
invoke-item C:\Users\$env:Username\Desktop\$group.csv
The script outputs to CSV fine for my "English" keyboard layout:
However, when the script is run on a computer with a Norwegian keyboard layout, the output is not delimited correctly:
Has anyone ever dealt with anything like this, or know why the output is not delimiting correctly? There are no errors when running the script in either English or Norwegian keyboard layout.

Ahhh... I bet you guys are exactly right!
I did a quick Google search and found this TechNet thread where jrv discusses an issue similar to mine:
http://social.technet.microsoft.com/forums/scriptcenter/en-US/4de7ed7a-f1b3-4e35-98b1-ef1f7f2ee7b2/powershell-export-from-excel-to-csv-having-delimiter
One of the links jrv gives in the article describes how to find what delimeter you're using:
http://www.howtogeek.com/howto/21456/export-or-save-excel-files-with-pipe-or-other-delimiters-instead-of-commas/
So it looks like I can just run a "(get-culture)" command in my script before I output to CSV and then use the "delimeter" parameter of export-csv. With the get-culture cmdlet, there's 2 parameters I believe I can use: the "LCID" parameter, and the "keyboardlayoutID"
parameter (but I can't seem to find a difference between the two parameters). Would you guys know which one of these parameters (LCID or keyboardlayoutID) might determine the delimiter used in CSV's? (link to LCID's below)
http://msdn.microsoft.com/en-us/goglobal/bb964664.aspx

Enhancements are not visible in different clients

Hello Experts,
I am facing a strange issue in my compoenent enhancements for IUICMD.
I have created an enhancement set ZCRM_IUICMD and assigned it to different clients thorugh BSPWDV_EHSET_ASG.
All my enhancements to componenet are attached to the above enhancement. Suddenly i can see that my enhancements
behave differently in two different clients.
I have verified the repository objects like classes & methods and also UI configuration. It remains same in both clients.
Let me know if you have faced similar problem and your solution to that.
Thanks in advance................
Best Regards,
Prabahar

Hi Saumya,
I am enhancing the component view IUICMD/DetailAccount. Here i have created a new context node for BuilheaderSearch.
I am using using context node attribute ID_TYPE in IUICMD/DetailAccount & Provided F4 help for that. Now i can see Input help in client 200 & not able to see that in client 210.
I have assigned my enhancements to both the clients 200 &210. In both the clients UI Configuration remains the same.
Hope it gives you the details that you are expecting.
Best regards,
Prabahar
Edited by: Prabahar N.R on Sep 10, 2009 1:10 PM

Has anyone ever encountered layer blend modes behaving strangely?

I use photoshop quite a bit for retouching and photo compositing. Tonight I encountered a strange problem. I was trying to create a vintage look on a photo and had a number of adjustment layers including a curves, levels, color fill and there were also a few texture/noise layers all set to varying opacities. Near the top of all this I had a vignette layer that was black around the edges and white in the center set to blend mode of multiply. Well, when I was clicking on and off I realize that that vignette layer was definitely lightening the center part of the overall image quite a bit (the part that is white on the vignette layer), almost like a screen. So I flipped the vignette layer through different opacity modes and saw that there was no change in its behavior, every mode was screening the white, even darker color and multiply. I thought maybe it was interacting in a weird way with one of the other layers so I turned all the others off except the back ground-- still no change. Then I dropped the layer down one at time until it was below the background. When I started to move it up again, it was behaving normally for a moment until I moved it up a couple levels in the stacking order and then it went back to the screen behavior. Anyway I shuffled it around a bit but there was no consitency to when it would display the correct opacity and when it wouldn't, so it did not seem to be an interaction with any specific layer. I don't know, but I can't really think of any case where white set to multiply should produce a lighter result even if it were interacting with another opacity. In any case it does seem to me that there is something going on with the overall computation of opacities. I tried creating a new black and white layer and it was also doing the same thing, behaving strange and not displaying the correct opacity.
I'm tired, so I'm going to bed. I'm going to shut off the computer and hope this goes away when I reboot, but if it does not, does this sound familiar to anyone? I'm not a regular visitor to this forum, but I thought I'd put it out there in case anyone else has experienced anything like this. I've only got 5 gigs of ram on this computer and I've been working away for a while... maybe photoshop just couldn't keep up(?) I'm using Photoshop CS5, RGB Adobe 1998 colorspace. I've never had anything like this happen in the last 11 years I've been using photoshop. Hmmm.... hope I don't have to reinstall or call support or worse. fingers crossed.

Nevermind. It is still having the problem. I have to think that this file is just corrupt somehow because I just opened another file and can't seem to cause the same problem. Basically, I can fill a layer with white, put it to a blend mode of multiply or darker color and it will block out everything of the image below, ie totally opaque. The opaqueness varies depending on the if there are other layers also on blend modes, but it does not seem to correspond to normal blend mode interaction. If I put it right on top of a regular layer with an image on it, it totally blocks it out on a blend mode of multiply... weird. I am going to scrap this file and see if the problem recurs in other files. My 2006 Mac Pro is getting some years on it and has been running pretty slow. I'm not a hardware expert but I've done everything I know how to do to maintain it. Was thinking of upping the ram to see if I can hold out a bit longer before I upgrade the computer. Wouldn't surprise me if this problem is related to the computer.

[svn] 1754: Add more authentication tests for different channels.

Revision: 1754
Author: [email protected]
Date: 2008-05-15 14:43:20 -0700 (Thu, 15 May 2008)
Log Message:
Add more authentication tests for different channels. Fix a couple timing issues in the tests. Some tests were calling logout() and not waiting before running the next test which was failing in some cases.
Modified Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-amf/MessagingAuthenticationTest.mxml
Added Paths:
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/JMSAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthenticationTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MessagingAuthenticationTest2.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/polling-http/MultiTopicMessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/JMSAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthenticationTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MessagingAuthenticationTest2.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-amf/MultiTopicMessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/JMSAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/JMSAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/JMSAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthConSubscribeTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthProSendTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthSendSubscribeConstraintTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthenticationTest.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MessagingAuthenticationTest2.mxml
blazeds/branches/3.0.x/qa/apps/qa-regress/testsuites/mxunit/tests/messagingService/securi ty/streaming-http/MultiTopicMessagingAuthConSubscribeTest.mxml

Hello Emil,
Thank you for your response.
We have SAP PI 7.11 and we did get it to work with SPNego (Kerberos token) for an SSO interface from a .Net web client using an ActiveDirectory User. It was NOT an easy task, but it worked.
The problem we are facing is that when we setup the Authentication Stack for the XISOAPAdapter component in the NWA as instructed by SAP to support BASIC Auth AND SPNego, the old .Net clients that do not FORCE the Basic Auth try to connect with an NTLM Token (and this doesn't work)
After their first request they receive a response from PI with:
www-authenticate: Basic realm="XISOAPApps"
www-authenticate: Negotiate
Then they choose to send NTLM Token instead of the Basic. This very simple to fix, by forcing the .Net client to send Basic or Kerberos. But we can not change the client side as they are in production env. for some time now, and we have over 200 interfaces with several applications, the impact is quite big...if you know what I mean...
So I thought that maybe it was possible to do some Z XISOAPAdapter component parallel to the original and have two different Auth Stacks.
We have opened an OSS with SAP and we are exchanging msgs for some time now. I'll let you all know how this ended...
Regards.
PS: Would be great to read Michal Krawczyk thoughts on this topic ! thx !

SG300 ssh strange error: "A client is already connected"

Hi,
I've got a few SG300-52 switches running software version 1.3.0.62 which I configured for ssh management access with public key authentication via:
ip ssh server
ip ssh pubkey-auth auto-login
username mgmt password ... privilege 15
crypto key pubkey-chain ssh
user-key mgmt rsa
key-string ...
This is working fine if I connect interactively from my management system with:
ssh -i mgmt_id_rsa mgmt@switch
where mgmt_id_rsa is the name of a file containing the private key.
I get a privileged command prompt as intended, without being asked for a password.
However if I try to pass a command on the ssh command line like this:
ssh -i mgmt_id_rsa mgmt@switch show version
the command just hangs until I hit the Enter key a second time, and then emits the strange message:
Received disconnect from 10.11.12.13: 2:
A client is already connected
(Exactly like that, including the line break after the "2:" and the blank before "A client".)The same happens if I pipe the command I want to send into ssh like this:
echo show version | ssh -i mgmt_id_rsa mgmt@switch
except the error message appears immediately and I don't have to hit Enter a second time.
This is unfortunate as the objective of the whole exercise is to send commands to the switch from a script.
Can anyone shed some light on why this is so? What is that strange message "a client is already connected" trying to tell me? Is that another bug in Cisco's ssh implementation? Ideas for a workaround, anyone?
Thanks,
Tilman
PS: I already asked that question over in the "big business" support community before noticing there's a separate small business section, but got no answer there.
PPS: The real objective of the exercise is to make scripted backups and updates of the switches' configurations, ie. what would be naturally expressed as
scp -i mgmt_id_rsa mgmt@switch:running-config /var/backup/switch.config
and
scp -i mgmt_id_rsa /var/conf/switch.configchange mgmt@switch:running-config
except it doesn't work that way because the SG300's ssh server lacks scp support. Trying to replace that by
ssh -i mgmt_id_rsa mgmt@switch copy running-config scp://server/var/backup/switch.config
and
ssh -i mgmt_id_rsa mgmt@switch copy scp://server/var/conf/switch.configchange running-config
led me straight to the problem above. Just in case someone feels inclined to ask the standard forum question: "Why do you want that anyway?" :-)

Hi all,
I've improved my expect script a bit to:
allow specifying the SSH user and keyfile on the command line
allow sending configuration mode commands
correctly handle very long commands (line wrap) and commands producing no output
Extended usage:
ciscosb-exec confuser@myswitch -i ~/.ssh/confuser_id_rsa -c "ip ssh-client username memyself"
ciscosb-exec confuser@myswitch -i ~/.ssh/confuser_id_rsa "copy scp://myserver/workdir/myswitch.configchange running-config"
The "new and improved" script:
#!/usr/bin/expect
# Script to run an IOS command on a Cisco Small Business Switch via ssh
# Prerequisites:
# - Cisco Sx300 series switch with software version 1.3 or later
# - public key authentication with auto-logon configured
# Usage:
#   ciscosb-exec [] [@]
# Args:
#         username on switch
#         name or IP address of switch
#      command string to execute
# Options:
#   -c          execute in configuration mode
#   -i use SSH private key from
#   -d          activate debugging output
# Result:
#   Switch response will appear on stdout
# debug switches
log_user 0
exp_internal 0
# configurable values
set sshcmd "/usr/bin/ssh -c aes192-cbc"
# end of configurable values
# below matches prompts such as "switch#", "switch>", "switch$"
set prompt "\[>#$\]\ *$"
# getopt implementation snarfed from http://www2.tcl.tk/17342
proc getopt {_argv name {_var ""} {default ""}} {
    upvar 1 $_argv argv $_var var
    set pos [lsearch -regexp $argv ^$name]
    if {$pos>=0} {
        set to $pos
        if {$_var ne ""} {
            set var [lindex $argv [incr to]]
        set argv [lreplace $argv $pos $to]
        return 1
    } else {
        if {[llength [info level 0]] == 5} {set var $default}
        return 0
# parse command line
set configmode [getopt argv -c]
getopt argv -i idfile
if {[getopt argv -d]} {
log_user 1
exp_internal 1
if {[llength $argv] != 2} {
send_user "Usage: ciscosb-exec \[\] \[@\] \"\"\n"
send_user "Arguments:\n"
send_user "        target username (default: current user)\n"
send_user "          target host name or IP address\n"
send_user "         command string to execute\n"
send_user "Options:\n"
send_user "    -c            execute in configuration mode\n"
send_user "    -i    use SSH private key from \n"
send_user "    -d            activate debugging output\n"
exit 1
set target [split [lindex $argv 0] @]
if {[llength $target] == 1} {
set device [lindex $target 0]
set userid "$env(USER)"
} elseif {[llength $target] == 2} {
set userid [lindex $target 0]
set device [lindex $target 1]
} else {
send_user "bad target: [lindex $argv 0]\n"
exit 1
set command [lindex $argv 1]
if {[info exists idfile]} {
set sshcmd "$sshcmd -i $idfile"
eval "spawn $sshcmd -l $userid $device"
match_max [expr 32 * 1024]
# handle initial noise
set timeout 20
while { 1 } {
expect {
    # command prompt
    -nocase -re "$prompt"     {break}
    # confirmations (unknown fingerprint etc.)
    -nocase -re "\$yes/no\$" {send "yes\r"}
    # username prompt
    -nocase -re "name:|^login:" {send "$userid\r"}
    # password prompt
    -nocase -re "word:" {send_user "Public key authentication failed\n"; exit}
    # errors
    timeout     {send_user "Timeout waiting for command prompt\n"; exit}
    eof         {send_user "Connect failed: $expect_out(buffer)\n"; exit}
# disable terminal formatting junk
send "terminal datadump\r"
expect {
    -nocase -re "$prompt"     {}
    timeout     {send_user "Timeout waiting for command prompt\n"; exit}
    eof         {send_user "Connection lost: $expect_out(buffer)\n"; exit}
send "terminal width 0\r"
expect {
    -nocase -re "$prompt"     {}
    timeout     {send_user "Timeout waiting for command prompt\n"; exit}
    eof         {send_user "Connection lost: $expect_out(buffer)\n"; exit}
# switch to desired mode
if {$configmode} {
send "configure terminal\r"
expect {
    -nocase -re "$prompt"     {}
    timeout     {send_user "Timeout waiting for command prompt\n"; exit}
    eof         {send_user "Connection lost: $expect_out(buffer)\n"; exit}
# actual command may take a long time
set timeout 180
send "$command\r"
expect {
    # skip command echo
    -re "$command\[\r\n\]*"   {exp_continue}
    # answer confirmation request
    -nocase -re " \$Y/N\$.*\? *$" {
        # send confirmation, skip echo
        send "Y"
        expect -re "Y\[\r\n\]*"
        exp_continue
    # collect response, excluding next prompt
    -re "\r\n"                {send_user "$expect_out(buffer)"; exp_continue}
    -nocase -re "$prompt"     {send "exit\r"}
    timeout     {send_user "Timeout waiting for command prompt\n"; exit}
    eof         {send_user "Connection lost: $expect_out(buffer)\n"; exit}
set timeout 20
expect {
    # second exit needed for logging out from configuration mode
    -nocase -re "$prompt"     {send "exit\r"}
    timeout     {send_user "Timeout waiting for hangup\n"; exit}
    eof         {exit}
expect {
    -nocase -re "$prompt"     {puts "Failed to log out, disconnecting"; exit}
    timeout                   {puts "Timeout waiting for hangup"; exit}
    eof                       {exit}
HTH
Tilman

How to connect different clients of same SAP Instance

Hi,
I have a question abour CPS 7, Basic- / Free of Charge Version
I know that this version is restricted to have only one SAP Instance per Isolation Goup, but how about different clients of the same Instance ?
Is it necessary to create an Isolation Group for each client of the same instance ?
We actually have 1 isolation group with 1 Instance and 1client .
Trying to create a second XBP Connection to another client fails then saving the changes with error:
"JCS-102120: SAP System DI1.DI1_045 should be isolated but is not. Show error details"
I didnt find a concrete statement in the Installation - and in the Admin Guide.
Regards
Frank

Hi Frank,
This is correct, there is one client per isolation group. The free version works similar in this respect to SM36/SM37: jobs are defined in each client individually and independently.
Regards,
Anton.

ERROR WHILE testing WEBSERVICE IN TWO DIFFERENT CLIENTS

hi all
i have developed a proxy and try to test web service in wsadmin tcode through two DIFFERENT CLIENTS.
FROM CLIENT 1 IT IS SHOWING THE SUCCESSFULL RESPONSE
BUT FROM CLIENT 2 IT IS SHOWING THE FOLLOWNG ERROR.
No implementing class registered for the interface (ABAP interface, request message , request message, namespace )
THANKS
praveen kalwa

hi marten
can u describe in brief what i should do in the sxmb_adm in the both client ..
why because i could not find any thing
PLS DO THE NEED FULL
thanks in advance
PRAVEEN KALWA

Different Service Desks in different clients in the same Solution Manager?

Hi
Is it possible to place different Service Desks in different clients in the same Solution Manager?
Concrete we plan the following scenario:
- Division 1
-- System 1,2,3, etc.
-- Service Desk in client 100
-- Monitoring for the whole trust in client 050 (still exists)
- Division 2
-- System 4,5,6, etc.
-- Service Desk in client 200
-- Monitoring for the whole trust in client 050 (still exists)
Is it possible to realize this scenario or are there any restrictions?
Thanks & Regards
Andreas
Edited by: Andreas Städler on Mar 19, 2008 5:52 PM
Edited by: Andreas Städler on Mar 19, 2008 5:54 PM

hi Neil
did u solve the problem still Struck let me know
we can access the same iview n no of clients. let me know any do u have any queries and other infomation
bvr
Edited by: bvr on Dec 2, 2008 6:32 AM

Just done a fresh install of Snow Leopard with all updates,iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately, I believe its related to overheating ?

Just done a replacement of the pata DVD drive (its new and is working ok), and a fresh clean install of Snow Leopard with all updates, iMac 5.1 behaves strange, sometimes I start Google Chrome and look at youtube videos the computer freezes and shuts down immediately,
I believe its related to overheating ?
iStat Pro shows GPU diode temp at 66 C, CPU at 48 C, Fan rpms is around 1000
Any ideas somebody ?
The hard disk has been previously checked with state of the art techniques that have confirmed that the hard disk drive is in perfect condition.

1.5-3 minute boot up as opposed to 15-20 seconds
And
why it takes a long time to load a lot of things.
I have restored this
from a time machine partition.
TimeMachine is only a backup and restore, it won't fix issues in software and according to your information, doesn't even optimize the restore for best performance on boot hard drives.
What you need to do to regain your speed is to understand how your machine works
Why is my computer slow?
Fix any and all issues in software following this list of fixes
..Step by Step to fix your Mac
Then follow this defrag method I've outlined
How to safely defrag a Mac's hard drive
Most commonly used backup methods
There shouldn't be need to reinstall OS X fresh unless your having file structure issues which if they are should appear when in the Steps, which then a zero erase and install will cure as well as any bad sector issues, the defrag step wouldn't be necessarry on a freshly installed system obviously as the files are written all together, not in portions all over the drive.
Hope this assists.

To check the difference between 2 programs from 2 different clients

standard program which you can use to compare difference between sources codes of 2 different programs

Hi,
use remote comparision to compare the program with two different clients..or use TCODE-SE39
Regards,
Nagaraj

I currently have 30,000 photos in my i photo library in300 events. Ientally ad. I add photos each day to different events over many years. Currently I download my photos on one of my 6 MacBooks , and eventually I synch the photos to my phone

i have 30,000 photos in 300 events in I photo.
i Add photos each day into different events
i have to manually add the photos into one of my 5 MacBooks , synch to my phone and then synch each device to have all my photos be up to date with each event
is there now a way to add photos to my 30,000 photo library on just one device anfd have all my devices synched perfectly through the cloud into events exactly as it appears on my first device ...like our contacts or other synched items on the cloud?
it is critical that the events are maintained and the photos go exactly into place?
photo stream is not the answer
thanks
Knickfan 1970

Hi Terence:
so that sounds like better news...I should be OK when this happens?
Essentially my events become albums...I still have the separation ..correct?
Why would this be a problem?
This was a response from an earlier post from Vanoord that concerned me: quote..see next-
Events has been removed from Photos - it's replaced by 'Moments'.
'Moments' are like 'Events', but split up by the software and you have no control over what goes where, or what they're called. If you've got 300 Events now, you can look forward to about 3,000 'Moments'.
This response implies that all my 300 events will become separated into thousands of moments. What does this mean? Is this true?
Won't my Events just become albums as you suggested?
I have years of events that have accumulated and collated photos. They must stay separated.
****the other thing I was unclear about was the synching part..
Example:
I have 300 albums with 30K photos distributed in various numbers in each album ( used to be events according to your response)
I add some photos in each album each day
I set all my devices to the cloud etc...
the cloud synchs from my designated "source" Macbook...
the cloud sees this and uploads
then the confusing part...the other devices ( MacBooks, I pad, i phone) all will see the synch and can then be designated to download to each device in the original form as we view it on a Macbook or i phone? What does "full resolution" or optimized previews mean as Leonie replied above?
I need my JPEG images for my education keynote presentations and e mailing images as required from each event as needed ( soon to be albums)
Thanks again...just want to understand what is going to happen

Metronome behaving strangely

When I press the record button in GB 3.0.4 The level meter displays a pulsing level, but I hear no sound for the metronome until I depress a key on my MIDI keyboard. This remains true whether I have it set to "Count In" or not. Another curious problem is that if I set the metronome to play during both Playback and Recording, I don't hear it during playback, until it reaches a region. For example, if I start playing from m. 1 but no instruments enter until m. 2, I don't hear the click start until after the instruments enter.
Anyone else having this problem? Any ideas what might be causing it?
Thanks,
Michael

Hangtime, thanks for your help, but the issue isn't the volume of the metronome. Normal GB functionality is that if you have Metronome selected to be "on," then when you click on the Record button you immediately hear the metronome, as well as see the click registering on the meter. I don't hear it, even though it is registering on the meter, until I depress a key on my MIDI keyboard. Then I hear it just fine. I've been working with this software since version 1 came out, and I've never had this problem before. I also have Sibelius, Logic, and Reason, so I am wondering if I may have unknowingly tweaked some setting that is making MIDI in GB behave strangely.

Why is my MacBook display behaving strangely?

I am using an alumin(i)um MacBook (13", late 2008 model with multi-function glass trackpad). In the past couple of weeks, the display has started to behave strangely. The screen seems to freeze (meaning any mouse movements or keystrokes do not display), and then the screen begins to fade to grey. It seems to be resolved by tilting the display until the MacBook "wakes". There has also been some occasional flickering of the display, although far less frequent. Could someone help me with this? Is it something like a loose connection, and, if so, how should I deal with it? (The MacBook is now out of warranty, so my next step would be my local Apple store). Thanks in advance!

Same thing happening to me - began about four weeks ago, two weeks after warranty expired. Has gotten to the point where it's difficult to use the computer - don't get through composing an e-mail before it starts to fade - now know that even though computer display is frozen, the keystrokes are still getting through, so be careful what keys you press trying to get it to pay attention!
I believe it's going to turn out to be a connection problem between the computer and the display in the hinge area. I found out yesterday that as it freezes, and I start to pick it up off my lap and put it aside, if I pick it up with my left hand near the lower left of the keyboard and my right hand behind the display, down low near then hinge, and pulling slightly towards me, this fixes it (for a while), and this is (for me) the most reliable way to wake it back up. I've seen references elsewhere to this being a simple problem where a connection is maintained with a black foam pad to provide pressure to the connection. I think the foam must degrade or lose resiliency (apparently at 12.5 months from purchase!) and there may be a simple solution available. When I figure it out for this particular model, I'll post my conclusions.

My Macbook Air behaves strangely with my USB devices.

Hello! My Macbook Air behaves strangely with my USB devices. They appear in the Finder but the icon then quickly disappears, as if the device has never been connected. Sometimes the devices work fine, however. Could you please help me identify the problem?

USB draws power from the MBA, and MBA will shut them down if too much is taken. Try a self-powered (not USB-powered) hub, to see if the AIr acts better. Costs about $25 at BestBuy.
May not tbe the final solution, but no a bad idea anyway.

Add-On behaves strange on different clients !

Similar Messages

Maybe you are looking for