To check the difference between 2 programs from 2 different clients

standard program which you can use to compare difference between sources codes of 2 different programs

Hi,
use remote comparision to compare the program with two different clients..or use TCODE-SE39
Regards,
Nagaraj

Similar Messages

Query to get the difference between 2 totals from 2 different queries

I wanted to know if it is possible to get the difference between 2 totals from 2 different queries. I would explain with an example:
1st query - Select sum(homepass) from table 1
2nd query – select sum(homepass) from table2
Is it possible to display the difference like-
Select sum(homepass) from table 1 - sum(homepass) from table2
I know the above query would gives syntax error but is there a better way or a trick to get the above task accomplished from a single query.
I hope, my question is clear.
Please revert with the reply to my query.
Regards

tomernitin wrote:
Try this one also:
WITH adtn1
AS
SELECT 110 val1 FROM dual UNION ALL
SELECT 100 FROM dual UNION ALL
SELECT 90 FROM dual UNION ALL
SELECT 10 FROM dual
adtn2
AS
SELECT 10 val2 FROM dual UNION ALL
SELECT 20 FROM dual UNION ALL
SELECT 30 FROM dual UNION ALL
SELECT 100 FROM dual
SELECT(Sum(a1.val1)-Sum(a2.val2)) Diff FROM adtn1 a1,adtn2 a2;
let me know if you still have any doubt.
Um.... I don't think so. Not with the cartesian join between a1 and 2.

Wht is the difference between unicode program and non unicode program ?

Hi guru,
wht is the difference between unicode program and non unicode program ?
Regards
Subash

About brief idea about unicode
In the past, SAP developers used various codes to encode characters of different alphabets, for example, ASCII, EBCDI, or double-byte code pages.
ASCII (American Standard Code for Information Interchange) encodes each character using 1 byte = 8 bit. This makes it possible to represent a maximum of 28 = 256 characters to which the combinations 00000000, 11111111 are assigned. Common code pages are, for example, ISO88591 for West European or ISO88595 for Cyrillic fonts.
EBCDI (Extended Binary Coded Decimal Interchange) also uses 1 byte to encode each character, which again makes it possible to represent 256 characters. EBCDIC 0697/0500 is an old IBM format that is used on AS/400 machines for West European fonts, for example.
Double-byte code pages require 1 or 2 bytes for each character. This allows you to form 216 = 65536 combinations where usually only 10,000 - 15,000 characters are used. Double-byte code pages are, for example, SJIS for Japanese and BIG5 for traditional Chinese.
Using these character sets, you can account for each language relevant to the SAP System. However, problems occur if you want to merge texts from different incompatible character sets in a central system. Equally, exchanging data between systems with incompatible character sets can result in unprecedented situations.
One solution to this problem is to use a code comprising all characters used on earth. This code is called Unicode (ISO/IEC 10646) and consists of at least 16 bit = 2 bytes, alternatively of 32 bit = 4 bytes per character. Although the conversion effort for the R/3 kernel and applications is considerable, the migration to Unicode provides great benefits in the long run:
The Internet and consequently also mySAP.com are entirely based on Unicode, which thus is a basic requirement for international competitiveness.
Unicode allows all R/3 users to install a central R/3 System that covers all business processes worldwide.
Companies using different distributed systems frequently want to aggregate their worldwide corporate data. Without Unicode, they would be able to do this only to a limited degree.
With Unicode, you can use multiple languages simultaneously at a single frontend computer.
Unicode is required for cross-application data exchange without loss of data due to incompatible character sets. One way to present documents in the World Wide Web (www) is XML, for example.
ABAP programs must be modified wherever an explicit or implicit assumption is made with regard to the internal length of a character. As a result, a new level of abstraction is reached which makes it possible to run one and the same program both in conventional and in Unicode systems. In addition, if new characters are added to the Unicode character set, SAP can decide whether to represent these characters internally using 2 or 4 bytes.
A Unicode-enabled ABAP program (UP) is a program in which all Unicode checks are effective. Such a program returns the same results in a non-Unicode system (NUS) as in a Unicode system (US). In order to perform the relevant syntax checks, you must activate the Unicode flag in the screens of the program and class attributes.
In a US, you can only execute programs for which the Unicode flag is set. In future, the Unicode flag must be set for all SAP programs to enable them to run on a US. If the Unicode flag is set for a program, the syntax is checked and the program executed according to the rules described in this document, regardless of whether the system is a US or an NUS. From now on, the Unicode flag must be set for all new programs and classes that are created.
If the Unicode flag is not set, a program can only be executed in an NUS. The syntactical and semantic changes described below do not apply to such programs. However, you can use all language extensions that have been introduced in the process of the conversion to Unicode.
As a result of the modifications and restrictions associated with the Unicode flag, programs are executed in both Unicode and non-Unicode systems with the same semantics to a large degree. In rare cases, however, differences may occur. Programs that are designed to run on both systems therefore need to be tested on both platforms.
You can also check out these official SAP locations on the SAP Service Marketplace:
http://service.sap.com/unicode
http://service.sap.com/unicode@SAP
http://service.sap.com/i18n
Regards,
Santosh

What's the difference between tracking movements from iPhone 5s with m7 coprocessor and iPhone 4s/5

can any one tell me all the difference between the tracking system of these iPhones. And do both of them need gps and internet

Read http://support.apple.com/kb/HT5262

What the difference between AirPort Extreme from $99 from the other that cost $199,$299or $399

I want to but a airpor extreme but what the difference from the AirPort Extreme starting $99 to the other ones that cost $199,$299 or $399

At $99 you have the Airport Express, $199 the Airport Extreme, $299 a 2TB Time Capsule, and $399 a 3TB Time capsule. The Airport Express has 100Mb/sec ports and no AC wireless. The Extreme is gigabit and does AC wireless. The Time capsule are essentially an Extreme with a built in hard drive for Time Machine backup or general Network Attached Storage. Read more at the Apple Store.

The best way to check the differences between two lists? Or substracting

Hi,
I am Googling on this and find many different answers and I am not sure what the best approach is. I have two lists:
List A: with 10000 entries (String with length 6 all of them)
List B: with 10002 entries (String with length 6 all of them)
List A and B are almost identical but with 2 differences. I want to find these two differences or in other words generating a third list, List C with these 2 differences.
What is the best way to approach? To us Array, ArrayList, Vectors, Hashmap, Hashtable...
Thank you for any hunches

Maria1990 wrote:
I think I found the easiest approach...
listA = [a, b, c];
listB = [a, b];
listC = listA.removeAll(listB);
...but if it is the best approach with performance in mind.. I have no idea...It really depends on what sort of comparison you want. Lists allow duplicate elements, Sets do not; so a comparison of Sets based on the contents of your Lists would only return distinct element differences.
My suggestion: sort both lists and do a "staircase" comparison. That is (assuming they're both in ascending order):
1. Read through both until you find a mismatch.
2. Read through the one containing the "lesser" element, until you find a match, or until it's exhausted.
3. If you find a match, go back to 1.
4. If you exhaust one list, then any remaining elements in the other are also "mismatches".
HIH
Winston
PS: With this approach, you can also flag your mismatches as "A not in B" or "B not in A".
Edited by: YoungWinston on Jul 27, 2010 4:24 AM

Comparing-the-differences-between-anti-spam-agents-from-exchange-2010-to-exchange-2013

http://social.technet.microsoft.com/wiki/contents/articles/23582.comparing-the-differences-between-antispam-agents-from-exchange-2010-to-exchange-2013.aspx
Sathish

Hello,
This forum is for discussions and questions regarding profiles and Microsoft's recognition system on the MSDN and TechNet sites. It is not for products/technologies.
As it's off-topic here, I am moving the question to the
Where is the forum for... forum.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book: Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Differences between ABAP Programming and Dialog Programming

Can any one explain me the Differences between ABAP Programming and Dialog Programming

Hi,
ABAP PROGRAMING:
An ABAP program consists of individual ABAP statements. Each statement begins with a keyword and ends with a period.
PROGRAM FIRST_PROGRAM.
WRITE 'My First Program'.
This example contains two statements, one on each line. The keywords are PROGRAM and WRITE. The program displays a list on the screen. In this case, the list consists of the line "My First Program".
The keyword determines the category of the statement. For an overview of the different categories, refer to ABAP Statements.
You can execute different parts of programs conditionally or in loops using the standard keywords IF, CASE, DO, and WHILE.
When controlling the flow of an ABAP program, remember that the structure of the program is made up of processing blocks that cannot be nested. This section describes how to control the flow of a program within a processing block. The keywords covered here do not allow you to branch outside the processing block in which you use them. You can regard this as internal control of an ABAP program, as opposed to the external control provided by events in the ABAP runtime environment.
To control the internal flow of a processing block, you can use control structures to divide it up into smaller statement blocks according to the principles of structured programming.
DIALOG PROGRAMING:
This is a classical programming method that is based on dynpros and dialog transactions.
Classic Application Programming
Separating the application layer from the presentation layer means that when you run an ABAP application program requiring user interaction, control of the program is continually passed backwards and forwards between these layers. While a screen is ready for input, the corresponding SAP GUI of the presentation layer is active. During this time, the application layer is not active for the application program. Therefore, the ABAP application servers are free for other tasks. Once the user has entered data on the screen, program control passes back to the application layer. Now, the presentation layer is inactive. The SAP GUI is still visible to the user during this time, and it is still displaying the screen, but it cannot accept user input. The SAP GUI does not become active again until the application program has called a new screen and sent it to the presentation server.
Consequently, if you use this method, you need to divide dialog programs into single dialog steps, with each of these steps comprising the programming logic between two successive screens.
REGARDS,
VASAVI.
KINDLY REWARD IF HELPFUL.

Difference between DIALOGUE programming and SCREEN programming

Hi,
Please tell me the difference between dialogue programming and screen programming
jomon

hi
-          A transaction is dialog program that change data objects in a consistant way.
A dialog program must fulfil the following requirements
-          A user friendly user interface.
-          Format and consistancey checks for the data entered by the user.
-          Easy correction of input errors.
-          Access to data by storing it in the data bases.
screen progarmming means.dialogue programming contains.
-          Screens (Dynpros)
-          Each dialog in an SAP system is controlled by dynpros.A dynpros consists of a screen
And its flow logic and controls exactly one dialog step.
-          ABAP/4 module Pool.
     Each dynpro refers to exactly one ABAP/4 dialog program .Such a dialog program is also       called a module pool ,since it consists of interactive modules.
regads
praveen

Difference between a programming language and a scripting language??

Can anyone tell me what is the difference between a programming language and a scripting language??
Thanks,

http://en.wikipedia.org/wiki/Programming_language
http://en.wikipedia.org/wiki/Scripting_language

Whats the difference between Authentication and Login check up ?

whats the difference between Authentication and Login check up ?

Authentification is a more generic term. It's generally applicable to any situation where you check that information comes from where it claims to come from.
Login is just one form of authentification.

Whats the difference between executing a package from SQL and Visual Studio?

Hi,
We have a package that is currently failing to run when deployed to SQL. This has been tried from a schedule and also executed manually both are failing.
I have tried from Visual studio running on various machines (windows 8, server 2012) and in all cases run perfectly.
I am trying to understand the differences between deploying to SQL and running from VS so maybe I can figure out why this is happening.
I have the following errors when I run from SQL.
DTS_E_PROCESSINPUTFAILED - all errors like this point to the 'Sort' tasks in the script
dts_e_processinputerror not enough storage is available
I have tested in four environments and all fail from SQL but not from VS!
Last night I tried from my laptop and executed the package from SQL - it didn't fail but was still running in the morning so I terminated. Note this takes around 20 mins running from VS! why would it be so quick from VS but fail or take so long on SQL?
The test running at the moment is on a server with dynamic memory currently at 14GB. I decreased SQLs RAM to 4GB and it hasn't failed yet but has been running for two hours. Before changing this the package failed after a short time.
I thought it may have something to do with running from a virtual machine but doesn't explain why it couldn't run locally on my laptop.
All ideas welcome :) Many thanks,
Davina

I will try to address issues one by one
The error doesn't seems to be related to SSISDB configuration mode. It may be because of
Change in package definition (please confirm that the package which you are running on your laptop is the same on your msdb? - reload your SQL package from MSDB in BIDS/SSDT and recreate your source and destination components)
As your error message shows, "not enough memory available" (may be because of multicast) - Usually you can override this error by restarting SQL Server [not an optimal solution but it work & if that work it shows that your package fills
the memory - Keep an eye on task manager]
Make sure that your statics on table are updated [run EXEC sp_updatestastics]
Make sure your indexes are not de-fragmented [run rebuild indexes]
If you are dealing with many rows may be 40000 * 12 (because of multicast) = 4,800,000 rows the try to separate package.
Check your excel file format/column data type is correct
Check user permission who is running the job has required permission on folder/file.
Understand that sort is a blocking transformation and it requires all your data in memory before it sorts. so, if there are large number of rows then your complete memory will be occupied.
Difference between Visual Studio & BIDS/SSDT
Nothing much, other than BIDS runs on 32 bit while jobs on 64 bit (but there run time environment are configurable, though)
There shouldn't be any performance difference until your
package is on network location because transferring data to the network may slow the package. If package runs on SQL Server it uses SQL buffer pool to fetch data via SQL statement and then SSIS works on its own memory allotment.
Hope this will help you to understand and fix the issue.
Glad to help! Please remember to accept the answer if you found it helpful. It will be useful for future readers having same issue.

From ABAP view, what is the difference between version 4.7 and ECC 6.0 ?

Hi,
I am a ABAP developer. I want to know the difference between version 4.7 and ECC 6.0 from a programmer
perspective.
I also want to know what is obsoleted and what is enhanced.
Thanks.
Best Regards,
Chris Gu

I'm not sure if any of this is in your 4.7 version, but I know it wasn't available in our 4.6C before we upgraded and we have found the following extremely helpful in ECC 6.0:
1. The new ABAP Debugger - Search SDN and you'll probably find a bunch of info on these enhancements
2. The Enhancement Framework - this is a great new framework allowing enhancements to standard SAP programs without having to use "core Mods". Had we known about it prior to our upgrade, we could have probably eliminated 75% or so of our custom Z Programs which are copies of standard SAP code and 100% of our core mods (of which we only have a handful)
3. Code Inspector and more importantly the ability to turn it on to automatically run when releasing a transport.
4. The ABAP workbench has changed a bit with a new editor including some minimal code completion.
5. Automatic generation of services from any remote enabled function module.
These are just a few of the things that I've found helpful in an upgraded environment.

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?

What's the difference between PNG and JPG for exporting .idea files from the Adobe Ideas app?
What situations are better to export to to .PNG or .JPG?
J

iPad apps are designed specifically for the iPad and will not run on the iPhone or iPod Touch. iPhone/iPod apps will run on the iPad, but will only take up an iPhone sized portion of the iPad screen (though you get a 2x button which effectively doubles each pixel in both directions so may appear pixelated). There are also 'universal' apps (which have a '+' symbol against them in the store) which have processing in them to recognise the device that they are on and will tailor the display accordingly (so will make use of the iPad's larger screen).

I want to create an app. Can you tell me the difference between iOS developer program and the mac developer program?

I want to create an app. Can you tell me the difference between iOS developer program and the mac developer program?
Is the difference the device you're creating your app on, or for?

iOS Developer Program is only for those who wish to develop iDevice apps. Mac program is for those only developing Mac applications. If you wish to do both, then you need to enroll in both programs.

To check the difference between 2 programs from 2 different clients

Similar Messages

Maybe you are looking for