Add-On Generation issue

In order to create a new add-on for SBO, we have had problems with the
generation of the files "ard" and "exe" in version 2004 of SBO. We need,
urgently, to care the exact informations about the correct procedure to
follow in release 2004.
Thanks and regards,
Giuseppe Cena
Ribes Solutions

Here is a little walk through that I wrote to document the process of building add-on installers for 2004. It might help get you started with your development.
The walk-through assumes that you have created a VB.Net installer project that is similar in operation to the SAP example installed in the 'C:\Program Files\SAP Manage\SAP Business One SDK\Samples\COM UI\VB.NET\14.AddOnInstaller' folder, and that you are familiar with setting up an ARD file.
1.)     Compile your VB6 project. Enable version tracking in the Project Properies/Make tab.
     Each new release should have a new version number.
     This version number is accessible by viewing the properties of the compiled file,
     and choosing the version tab.
     Record this version number, as it will be used later.
2.)     Copy the newly compiled exe, and any other files to be deployed into your VB.Net installer projects folder.
     The VB.Net project contains references to the files in it's local folder, so they MUST be updated with the newly built versions.
     MAKE SURE THAT ALL OF THE FILE REFERENCES IN THE PROJECT HAVE THEIR 'BUILD ACTION' PROPERTY SET TO 'EMBEDDED RESOURCE'
3.)     Rebuild your installer project.
4.)     If this is the first time the project is being packaged, create an ARD file using the instructions below.
     If this is an update to the add-on, load the previous ARD file into the ARD editor using the load from file
     button. Update the following fields:
          Name field to reflect the current version number. ex 'XYZ Service 2.0.0' could become 'XYZ Service 2.0.1'
          Version number field to reflect the new version number ex '2.0.0' could become '2.0.1'
          Refresh the 'AddOn Exe Full Path' by selecting the newly built add-on exe. A checksum is calculated from this.
          Refresh the Installer Exe Full Path, and Uninstaller Exe Full Path by selecting the newly built installer exe. A checksum is calculated from this.
5.)     Save your ARD file, by using the 'Generate file' button.
6.)     Register your add-on with SAP Business One using the Administration->Addons->Add-on Administration screens, following the instructions there.
Regards,
Demetree

Similar Messages

Report generation issue

what are the diff report generation issues?

Nvm, solved it just had to set up Reporting studio in order to create an accurate report.

Can't add a goods-issue with more than one item and one is serial managed.

Hi,
We are trying to issue more than one item to a production order using the DI API. If none of the items is serial managed, they all are accepted and the goods-issue Add is successful. If one the items is batch-managed, the goods-issue Add is also successful. I am able to add the goods-receipt if I it contains only one item and it is serial-number managed. However, if Im issuing more than one item and one or more of the items is serial number managed, then the DI API will not add the goods-issue. The error message that appears refers to an item that is not among the items being issued. The message is:
-10: (IGE1.WhsCode)(line: 3), Item A00006        with system serial 1 is not in stock.
Again item A00006 is not even in the group of items being issued.
The code I am using for the serial number part is:
With oGoodsIssue.Lines.SerialNumbers
          .SystemSerialNumber = rs.Fields.Item("SysSerial").Value
          .ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
          .InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
          .SetCurrentLine(n)
          .Add()
          rs.MoveNext()
          n += 1
End With
The rs is a recordset that the code is looping through as the serial numbers are being added.
The error message does not occur during this code. It occurs when it tries to add the full goods-receipt. Does anyone have any idea how I can fix this?
Thanks,
Mike
Edited by: Mike Angelastro on Mar 31, 2008 8:43 AM

Hi Mike,
Try to do the ".Add" only if you need it. Doing a ".add" without assignation may cause the error you have.
I guess your n variable start at 1 or 0, so you could put code like this :
With oGoodsIssue.Lines.SerialNumbers
if n = 0 then (or 1, also I don't the correct syntax of your programming language)
.Add()
end if
.SystemSerialNumber = rs.Fields.Item("SysSerial").Value
.ManufacturerSerialNumber = rs.Fields.Item("MfrSN").Value
.InternalSerialNumber = rs.Fields.Item("IntrSerial").Value
.SetCurrentLine(n)
rs.MoveNext()
n += 1
End With
HTH
Jodérick

EOS / EOL / PSIRT report generation Issue

HI All ,
I am using lms 3.2 with RME 4.3.0
Recently i have seen 2 bugs related with EOS/EOL /PSIRT report generation issue
CSCta76147
CSCtc36563
The status of the bug is given as Fixed(verified )
Status
Fixed
(Verified)
Severity 3 - moderate
Last Modified
In Last Year
Product
CiscoWorks Resource Manager Essentials
1st Found-In
4.1
4.3
Fixed-In
5.0
Component(s)
eoxpsirtreports
Here the fixed release is given as 5.0 , can anyone please tel me where to get the 5.0 version for download .
( Is the 5.0 the LMS version or the RME version )
When i am trying to generate EOS/EOL report, i am getting error saying check the connectivity to cisco .
Regards
Angus

HI Afroj ,
When i am running the EOS/EOX or PSIRT report the job status is showing running but its not getting stoped .
I tried using the local option , downloaded the offline file from the below link and placed in
NMSROOT\files\rme\jobs\inventory\reports\EOX_PSIRT\local_xml
"http://tools.cisco.com/support/downloads/go/ImageList.x?relVer=4.1.1&mdfid=282635175&sftType=CiscoWorks+Resource+Manager+Essentials+Patches&optPlat=Solaris&nodecount=2&edesignator=null&modelName=CiscoWorks+Resource+Manager+Essentials+4.3&treeMdfId=268439477&treeName=Network+Management&modifmdfid=&imname=&hybrid=Y&imst=N&lr=Y
even then the job is running continuously its not stopping .
I have a RME version 4.3.0
Kindly let me know what i am doing is correct .
Regards
Angus

IPod Touch 4th Generation issue - no longer able to view Device in iTunes? I can't add, Sync, Back Up or Restore?

The PC’s I use have Windows 7 installed along with the latest version of iTunes. I have
previously deleted all components of iTunes and re-installed. This made no difference. The PC’s do not recognise my iPod in the Windows Device Manager using ‘devmgmt.msc’. and still nothing in iTunes.
Also C:\Program files\Common Files\Apple\Mobile Device Support\Drivers / - do notlist ‘usbaapl64’.
The folders listed are ‘usbaapl.cat’, ‘usbaapl.inf’,‘usbaapl.sys’ and ‘usbaaplrc.dll’.
Whether this makes a difference I do not know.
iTunes doesn’t recognise my iPod either however it recognises my attached iPhones OK
(iTunes/File/Devices) with the options of Sync; Transfer Purchases and Back Up being available.
When my iPod is connected, iTunes shows the File ‘Devices’ sections as being inaccessibly greyed out.
So to reiterate, I have tried multiple computers and a variety of Windows operating systems (but I’m running Windows 7) with absolutely no success; the ‘Device Manager/Universal Serial Bus controllers/Apple Mobile Device USB Driver’ appears with my iPhone but nothing for my iPod; the Apple Mobile Device Support is installed; all my USB cables work OK; the device does not appear in Windows or in iTunes; iTunes has been fully uninstalled and reinstalled; the version of iTunes is up to date; the iOS of the iPod Touch shows it is up to date at version 6.1.6 (and cannot be changed) and even a hard reset has been tried. Everything tried and suggested with complete failure.
I can use a USB port to charge up my iPod and can still receive e-mails, updates to apps and can play songs but I can’t add any new songs or update iOS. There are no error codes because as far as the computer and/or iTunes is concerned, there is no connected iPod. My iPod used to work perfectly. Also I tried the Apple iPod forum without success and was advised to try the iTunes community support.
Please help! Thank you.

I'm having the same problem with my 4th gen iPod touch. After the update my iPod synched and wiped all my music off - apps & podcasts weren't affected. Restored it a couple of times and that didn't work.
I tried copying a couple of albums over and it would do a couple of songs then the rest of the album would look like it had copied instantly. I tried playing the songs and it would play the first couple of songs once, then it came up with ! Beside every song (including the ones I'd just played and said they weren't on my iPod.
I've removed iTunes from my laptop and downloaded the few iTunes bought albums over WiFi to my iPod. The rest of my music is from cds or mixes/podcasts downloaded from soundcloud so I've had to use a different program to copy some of this music to my iPod for the time being until I can see how to sort this out.

Quota generation issue

Hi Friends,
We are trying to generate a specific quota for selected employees by using Time evaluation. Now the requirement is to generate the quota from the time evaluation period start date till the end date of FY.
I.e.
Quota 10 - 01.04.2010 to 31.03.2011 - 2.5
Quota 10 - 01.05.2010 to 31.03.2011 - 2.5
We had assigned a time type with the quota & generating with the time evaluation internal calculation result from period balance table.
But the issue is seperate line items for every month is not getting created. Instead the quota is getting increased or replaced in the same line item.,
Would appreciate your quick help on this...
Thanks
NK
Edited by: IBM Functional on Apr 28, 2011 9:30 PM

This functionality is as per SAP standards because, ideally, one would not run time evaluation for May in April. Time evaluation is to be run every day till the end of that day (or till the end of the current month). So when we look at your scenario in that light, we get the following results:
April run:
Quota 10 - 01.04.2010 to 31.03.2011 - 2.5
May run (it adds the quota to the April row item):
Quota 10 - 01.05.2010 to 31.03.2011 - 5.0
If the scenario in your organisation is to run time evaluation up to the current date or current month only, don't worry about this aspect. As long as evaluation is not run for future periods, you should not have an issue.
If, however, you want to run evaluation for the entire year in advance (something which should not be done), you can still try the following work-around:
1. Modify user exit HRPTIM03 - go into one of the implementations - maybe 005 or 008, can't recall;
2. Take the assistance of an ABAP consultant to pass the rule that - when the quota is generated, it's validity start date and deduction start date values are to be changed to the date of generation. This is the only way by which a new row item will be generated in IT 2006 (and the ABWKONTI cluster table) instead of appending the quota into the existing row.

Report generation issue with a hut

Hi,
I hav an issue using report generation my report is using huts and I i'm writting true or false value in excel case, which is linked with the hut but writting the value in the linked case does not change the hut value.
Thanks
Olivier

Hi Olivier,
I was wondering if you could expand on what the overall goal for your application is. Also I am not familiar with huts, could you explain what these are?
Eric A.
National Instruments
Distributed I/O Product Support Engineer

Issue in BIP Report Generation - Issue gets fixed when the rtf is opened and re-saved

Hi,
We are facing a unique case in BIP reports generation at a Customer site. The BIP installed is a part of the OBIEE 11g installation. The customer report generates most of the times, however there are instances where we get a techinical details error ( custom error ) - The only way to 'fix' this issue currently is to open the rtf file, hit the spacebar and save this file ( ie re-save this file ) and the report starts to generate correctly again for
Has anyone else faced such a problem ?
Also, not sure if this helps - the corresponding xdo has nested tags
Thanks in Advance
Orjun - Oracle Financial Services

Your server file handling has nothing, and really nothing to do with Adobe software. If files don't get locked for (over-)writing and/or lose connection to the program opening them, then your server is misconfigured. It's as plain and simple and that. Anything from "known file types"/ file associations not being set correctly, MIME types being botched, crooked user privileges and file permissions, missing Mac server extensions, delayed file writing on the server, generic network timeout issues and what have you. Either way, you have written a longwinded post with no real value since you haven't bothered to provide any proper technical info, most notably about the alleged server. Either way, the only way you can "fix" it is by straightening out your server and network configuration, not some magic switch in Adobe's software.
Mylenium

Add Report Generation toolkit for Microsoft Office in exe

Hi
I am having a problem. I am using LabVIEW 8.20, Report Generation Toolkit for Microsoft Office 1.1.2 and Microsoft Excel 2003. My OS is Windows XP (SP )
I want to build the vi attached below into an exe. The vis that I used are from addons>>_office>>excel.llb. I follow the suggestion found in the link below and add in all the files in excel.llb into my project so that it can be added into the executable as dynamic vis. However, some vis in excel.llb cannot be added into my project. After I have add all vis that can be added into the project, I build an application (exe) with the vi below as the Main vi and all other added vis (from excel.llb) as dynamic vis. After that, I build and run this exe on the same PC. I am unable to run it.
This vi will save datas when I click on the stop button. After I click on the stop button, a window will pop-up and prompt me to select which directory to save the vi. When I run the exe, I type in test.xls (for example) but the file saved is a picture and not an excel file. If I just run the vi instead of the exe, Excel will open and datas and graph will be displayed in Excel.
May I know where did I done wrong??
How do I use the Report Generation Toolkit in an executable with Microsoft Excel?
http://digital.ni.com/public.nsf/websearch/C38CE3F30542D65B86256F0E00740DD8?OpenDocument
Thank you & Regards
Lee
Attachments:
Self-Regulating.vi ‏132 KB
Untitled Project 1.zip ‏3841 KB

Hi centerbolt,
Thank you for your reply. I have tried adding in just that dynamic vi found in Excel Library and my main vi but it still cannot work. Is there anything that I need to look out as well?? [View attached picture.]
Thank you & Regards
Lee
Attachments:
added.JPG ‏92 KB

Dynamic crystal report generation - issues with column headings

Hi All, 
I'm trying to generate a crystal report dynamically based on a "result set" data(Query: select REPORT_ID, REPORT_NAME, REPORT_DESC, RPT_FILE_NAME, LOCATION from IRS_REPORT_DETAILS). I'm able to generate the report run time, But the report is without columns heads. I would like to include the column headings as well. 
I searched the API(RAS) and found that there is a 'add(java.lang.String fieldName, java.lang.String headingText) " method present in "ReportObjectController" using which we can add the headings. 
ReportDefController reportDefController = clientDoc.getReportDefController();
ReportObjectController reportObjectController = reportDefController.getReportObjectController();
reportObjectController.add( "{Table.Field}", "FieldName" );
 
I'm facing problems in using this code. When trying to use this function for my fields(Ex: reportObjectController.add( "{ IRS_REPORT_DETAILS.REPORT_ID}", "Report ID" );) it is giving me the following error: "com.crystaldecisions.sdk.occa.report.lib.ReportSDKGroupException: The field was not found.---- Error code:-2147213310 Error code name:fieldNotFound" 
The following is my dynamic crystal report generation code: 
public ReportClientDocument execute(String repName, String query) {
 ReportClientDocument boReportClientDocument = null;
 try {
 boReportClientDocument = new ReportClientDocument();
 boReportClientDocument.newDocument();
 // Add a table based on the given Resultset to the report.
 dbConnResultSet mySampleResultSet = new dbConnResultSet();
 //mySampleResultSet.execute(query);
 boReportClientDocument.getDatabaseController().addDataSource(
 mySampleResultSet.execute(query));
 IReportSource test = boReportClientDocument.getReportSource();
 // Access all the database fields
 DatabaseController databaseController = boReportClientDocument
 .getDatabaseController();
 IDatabase database = databaseController.getDatabase();
 Tables tables = database.getTables();
 ITable table = (Table) tables.getTable(0);
 int NO_OF_FIELDS = table.getDataFields().size();
 int LEFT_POSITION = 200;
 // Add all the database fields to the report document
 for (int i = 0; i < NO_OF_FIELDS; i++) {
 IField field = table.getDataFields().getField(i);
 FieldObject fieldObject = new FieldObject();
 fieldObject.setFieldValueType(field.getType());
 fieldObject.setDataSource(field.getFormulaForm());
 IReportObject rep = (IReportObject) fieldObject;
 IObjectFormat objformat = rep.getFormat();
 objformat.setEnableCanGrow(true);
 objformat.setHorizontalAlignment(Alignment.from_int(1));
 rep.setFormat(objformat);
 rep.setLeft(LEFT_POSITION);
 rep.setWidth(1000);
 LEFT_POSITION = LEFT_POSITION + 1000 + 50;
 ISection section = boReportClientDocument
 .getReportDefController().getReportDefinition()
 .getDetailArea().getSections().getSection(0);
 //***************** Data being added to the report here, But headings are not added*****************
 boReportClientDocument.getReportDefController()
 .getReportObjectController().add(rep, section, i);
 boReportClientDocument.createReport();
 /*Some report saving code is present down*/
 } catch (ReportSDKException ex) {
 ex.printStackTrace();
 } catch (Exception ex) {
 ex.printStackTrace();
 return boReportClientDocument;
 
appreciate your help.

IField field = table.getDataFields().getField(i);
Here you are getting the first field in the array. This may not be the field you want to add since we aren't sure how the arrays are ordered when retrieving fields from the report. It is better to retrieve the fields with the findObjectByName method, thus ensuring you are retrieving the field you want to add to your heading.

EJB 3.0: deployment/jar file generation issue

We have a web application project (ADF Faces) which depends on a model project (EJB 3.0 session/entity beans) that implements both business and persistence layers. This EJB project points to a utility jar file containing some classes we have built. When we run the web project from inside JDev, everything works perfectly, with no error. However, when generating EAR file (deploying web project to WAR) we experience an issue.
As expected, JDev generated the war file for the web app, the jar file for the EJB and finally the EAR file containing both war and jar files. After that, we managed to deploy the ear file to our OAS 10.1.3 test instance (not standalone OC4J) and an error occured. The error is due to the fact JDev did not create the /lib subdirectory inside ejb project jar file /META-INF directory with our utility jar file inside.
We tried to generate a separated jar file for the ejb project alone with the same results.
Is this an IDE bug which does not pack the application as it should? What could we be doing wrong? If yes, is there a work-around? Like I said, the application runs fine on embedded server. Also, when the EJB application does not depend on external libraries, the deployment to OAS 10.1.3 works perfectly. We have tested it!
Could anyone help us?
Thanks in advance.
Best Regards,
Gustavo
PS: Sorry for my English. :)

Hi Shay! I follow what you said and it worked. However, we had to manually edit MANIFEST file for the EJB jar in order to add classpath clause to map our util jar. IMHO, JDev should do it for us. Anyway, we were able to deploy the app successfully.
Best Regards,
Gustavo

Powerpivot add-in installation issue "Could not find a part of the path"

Hello,
I got a Windows Server 2008R2 terminal server with Office 2010 and Powerpivot installed. I have an issue for some users, not every user get this error. When trying to add the Powerpivot add-in in Excel the following error message is displayed:
Name:
From: file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
************** Exception Text **************
System.Deployment.Application.DeploymentDownloadException: Downloading file:///C:/Program Files (x86)/Microsoft Analysis Services/AS Excel Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto did not succeed. ---> System.Net.WebException:
Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.Net.WebException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft
Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'. ---> System.IO.DirectoryNotFoundException: Could not find a part of the path 'C:\Program Files (x86)\Microsoft Analysis Services\AS Excel Client\10\Microsoft.AnalysisServices.Modeler.FieldList.vsto'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options, String msgPath, Boolean bFromProxy)
at System.Net.FileWebStream..ctor(FileWebRequest request, String path, FileMode mode, FileAccess access, FileShare sharing, Int32 length, Boolean async)
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
--- End of inner exception stack trace ---
at System.Net.FileWebResponse..ctor(FileWebRequest request, Uri uri, FileAccess access, Boolean asyncHint)
at System.Net.FileWebRequest.GetResponseCallback(Object state)
--- End of inner exception stack trace ---
at System.Net.FileWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.FileWebRequest.GetResponse()
at System.Deployment.Application.SystemNetDownloader.DownloadSingleFile(DownloadQueueItem next)
--- End of inner exception stack trace ---
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.GetManifests(TimeSpan timeout)
at Microsoft.VisualStudio.Tools.Applications.Deployment.ClickOnceAddInDeploymentManager.InstallAddIn()
I have checked the path and I found nothing. I could understand the problem if all users got this error but it's online a handfew of users. Other users can add the add-in in Excel without any issue. All the users are in the same domain and they use the one
and only terminal server on the site.
Any advice? I've searched the web but haven't found anything.
Thanks in advance!

Guys, I think I solved the
issue:
Symptoms
1. Power Pivot SQL 2012 32-bit installed over the old version without
deinstalling it
2. Installed with a user with administrator rights
3. It worked under the profile with admin rights, it didn't work under the
normal users w/o admin rights and threw this error message: Downloading file.///c:/Program files (x86)/Microsoft analysis services/AS Excel Client/10/Microsoft.AnalysisServices.XLHost.Addin.VSTO
did not succeed.
4. In the admin profile, it went to the path "110": C:/Program
Files (x86)/Microsoft Analysis Services/AS Excel
Client/110/Microsoft.AnalysisServices.Modeler.FieldList.vsto
5. In the normal profile, it went to the - wrong - "10" path:
C:/Program Files (x86)/Microsoft Analysis Services/AS Excel
Client/10/Microsoft.AnalysisServices.Modeler.FieldList.vsto
SOLUTION
1. ADMIN: Installed VSTO 4.0
2. ADMIN: Checked if the .NET Programmability Support was installed - it was -
if not, install it!
3. NORMAL USER: Create a .reg file (Backup your registry before!) and
use it UNDER THE NORMAL USER!!!
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Office\Excel][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins][HKEY_CURRENT_USER\Software\Microsoft\Office\Excel\Addins\Microsoft.AnalysisServices.Modeler.FieldList]
"Description"="Microsoft SQL Server PowerPivot for Microsoft Excel"
"FriendlyName"="PowerPivot for Excel"
"LoadBehavior"=dword:00000003
"Manifest"="C:\\Program Files\\Microsoft Analysis Services\\AS
Excel Client\\110\\Microsoft.AnalysisServices.XLHost.Addin.vsto|vstolocal"
"CartridgePath"="C:\\Program Files\\Microsoft Analysis
Services\\AS OLEDB\\110\\Cartridges\\"
4. NORMAL USER: Rename the registry key
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User Settings\Microsoft.AnalysisServices.Modeler.FieldList"
into
"HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\User
Settings\Microsoft.AnalysisServices.Modeler.FieldList_old"
5. NORMAL USER: Start up Power Pivot and it should
work now!
Analysis
IMHO the issue lies in the fact, that the Power Pivot
installer creates two problems:
The first issue is that the path to the add-in under
the NORMAL user is simply wrong and points to a wrong location (the
"10" in the path). In the admin profile, where it was originally
installed, it points to the "110" path which is correct.
The second issue is that the installation procedure
somehow needs to create a registry key (the one under point 4 in the solution)
to complete it self and if this key already exists it fails to install and
throws up weird error messages. If you delete or rename this key, it is created
again (exactly in the same way) but then everything works out.
Hope this
helps!
Regards, Reto

/616 Add gross salary Issue

HI,
We have an issue in /616 wage type (Add Gross salary)
1. How do we calculate /616 wage type value manually?
2. /616 wage type is difference between grass salary that including arrears payment i guess. but i don't know how do we calculate manually. /616 wage type has some amount .I need to find out the break up of this value.
How do we do that and what are the wage type to be considered for /616 wage type.
3.How does the DT wage type form?
Regards,
Prasath

Ideally speaking, /616 WT contains the arrears of previous financial year that were given in current financial year (For eg DA and TA arrears of Jan to March 2010 in our case).
In my case I am getting correct values (as calculated manually) for most of the cases but for few it is giving other amounts which we are unable to trace.
Did you found the method of calculation in SAP?
Although you can remove the effect of /616 using model wagetype M89G.
Please find below the process flow of M89G series wage type:
1. Maintain relevant wage type (For example to adjust /616 use M89G and so on).
2. Maintain amount with opposite sign in the amount field.
3. Maintain the year for which you are performing the adjustment with
unit as year.
4. Maintain date of origin as current month date(any).
Save the entry and execute the payroll.
Regds,
Astha

Exchange 2003 to 2010 Migration OAB Generation Issue

Hi
I am in the process of migrating from 2003 to 2010. All mailboxes are moved across and email in and out are moving through the 2010. However I cannot move the oab generation server as when i go to change the generating server my New 2010 server is not listed
only the two old 2003 servers. This is a child domain in a large organization and is one of a large number of exchange servers forestwide. I have created a new oab and asigned to the mailboxes on the new 2010 server. The old 2003 server is off for over a week
and there are no issues.
I now need to remove both 2003 servers, what issues will not being able to move the generation server cause (If any if i am using a new oab). Also I am following the remove last exchange server line as this is the last 2003 server in this child domain are
there any issues with this in this scenario?

Hi,
According to your description, I understand that all mailboxes have been moved to Exchange 2010 and a new OAB is created for all users in your environment.
Please make sure the new created OAB is generated by Exchange 2010 and Enabled Web-based distribution. If there are any Outlook 2003 users in your environment, the public folder distribution should also be enabled. Then we can set the new one as default.
If so, all users in Exchange 2010 would use the new created OAB by default.
If you want to double check the OAB configuration, we can run the following command to check it:
Get-OfflineAddressBook | FL
Additionally, if your migration is complete and successful, we can follow the article below to remove the last legacy Exchange server from your Exchange 2010 organization:
http://technet.microsoft.com/en-us/library/gg576862(v=exchg.141).aspx
Best Regards,
Winnie Liang
TechNet Community Support

Solution Manager 7.1 Upgrade - ST add on release Issue

Good day
I have the following issue where the ST add on's are = the target release of the upgrade. The release is only on a higher patch level in 7.1(SPS4)
The step is Configuration(3) in SOLMANUP, it will not get past the phase of deciding to keep the add on's, the error is:
For the following Add-on component(s) the KEEP YOURS decision is not longer valid,
since at least for one of the base components an Add-on upgrade has been included:
ST-ICO     (changed base component: ST)
ST-PI      (changed base component: SAP_BASIS)
ST-SER     (changed base component: ST-PI)
You need to change the decision of the above Add-on(s).
Any ideas?
Thanks

Hi Miguel,
I am using SOLMANUP, I am using the installation/upgrade software and using SPS 4 as my target release. I am using SPS4_upgrade.xml in my download directory.
If I try using SPS 2 with SPS2_upgrade.xml it produces an error because my patch level of ST-PI is already patch 5 in my current system(Solution Manager 7.01 EHP1), and SPS 2 of Solution Manager 7.1 ST-PI = patch 4, that's why I am using SPS 4 stack as it is a higher level that my current patch level of ST-PI.
The issue is that the mentioned ST add-on's are the same release as the target release, the only difference is the patch level. The upgrade recognises that the source and target release is the same, but will not let me keep with Decision = Keep
Thanks
Derek

Add-On Generation issue

Similar Messages

Maybe you are looking for