Add On Issue ( HR Module  )

Hi Team ,
              I have installed Enterprise portal with dual stack JAVA & ABAP without ECC
now i wanted to add on HR module .
Is it possible and if it is how can i go ahead
please guide me through the procedure
Thanks in advance
Regards ,
Madhu

Hi
I am not sure this is possible usually the useage type is decided upon initial installation - in any case SAP_HR and associated dependancies may not be available as Add-ons/Plug-ins for SPAM, SAINT, SDM deployment or otherwise
Best wishes
Stuart

Similar Messages

  • Flex Table Add Row Issue with Dynamic Entry Lists in Visual Composer

    All,
    Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
    When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
    Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue.  What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
    Many thanks,
    Freek

    Hi,
    you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
    I have never heard of the problem that entry lists are emptied after "insert"-event.
    Kindes Regards,
    Benni

  • How to add an issue if you are a responsible manager of a child wbs ?

    How to add an issue if you are a responsible manager of a child wbs ? I have some projects with lots of child WBS and these child WBS is managed by others project managers (or others responsible managers), different responsible manager from the project. I'd like the others responsible managers could add/edit/delete issues in their WBS's. How to do that ?

    Hi Yves
    try to type at the end of your query the following
    select cardcode,cardname,balance from ocrd
    for browse
    and execute it again
    Edited by: Fasolis Vasilios on Nov 30, 2011 12:10 PM

  • Flex Table Add Row Issue with Dynamic Entry Lists

    All,
    Your help would be kindly appreciated in resolving an 'Add Row'-issue within a Flex Table that uses Dynamic Entry Lists in Visual Composer. The issue here is as follows :
    When I use a [Local Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=O5hrG2aMxWZ84Mu1211193041]to populate a row field, the initial row and all next rows are emptied upon 'insert row', they loose their selected values and also the entry list values ('pull-down menus') are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    The initial row does [show the entry list values |http://www.postyourimage.com/view_image.php?img_id=2HybmEHAuQYs9cg1211192766]from the Local Dynamic Entry List based on the dynamically assigned input value; upon 'insert row' the entry lists are lost. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=FPLr2cABcgiHRou1211192889].
    When using a [Global Dynamic Entry List |http://www.postyourimage.com/view_image.php?img_id=m5p2KYuBb442dTq1211193501]to populate the row fields the Flex-table behaves normally as expected. Unfortunately with a Global Entry List it is not possible to dynamically assign a input value. Please also see [screenshot|http://www.postyourimage.com/view_image.php?img_id=U96V0zENCCyO3gA1211193157].
    Please also see the [issue summary image|http://www.postyourimage.com/view_image.php?img_id=06xti08tIEfely1211195178] I made to visualize the issue.  What I basically would like to know is whether this is a 'known issue' or not, or that it is an issue that can be fixed or whether there is an alternative workaround available ... I'm using Visual Composer 7.0 and the Portal is at SP 13.
    Many thanks,
    Freek

    Hi,
    you should be able to assign a dynamic value with global entry lists as well. If you say @myParam as dynamic value. VC will indicate in red letters, that the field @myParam is unknown. However, it will work, as long as @myParam is known in the form or table where you use the entry list.
    I have never heard of the problem that entry lists are emptied after "insert"-event.
    Kindes Regards,
    Benni

  • RE: how to add attributes in graphical modulator in segment builder .

    Hi Gurus,
    can you please help me how to add attributes in graphical modulator in segment builder in sap CRM 7.0 WEB-UI.
    thanks and regards
    satyanarayana
    Edited by: koradasatya on Oct 27, 2011 8:14 PM

    Hi Gurus,
    thanks for your reply my requirement from client is given below if you could answer this it will be a great help for me.
    WKSC needs to be able to make selections (in segment builder) with the possibilities to use stored data on organizations. The information we are missing in Segment builder (SB) (and Account search for industrycode) are Industrycode (we want to see values not codes) and responsible salesrep (values not codes).
    These variables together with regions and other marketing attributes is crucial for us. Without it we cannot use the functionality built.
    We also need it so that we can extract smaller parts of our customers and prospects and update them with information from the thirdparty or adding new persons to them.
    Everyone using the SB should be able to use the fields for selections. i.e. Marketers, marketing managers and power users.
    Example
    We would like to make selections that could look like this.
    Region: A and B
    Organization in Industrycode C
    Sales rep: D, E, and F
    Turnover: above 50000
    CP on selected orgs
    CP has title G or H
    CP has Email not blank
    thanks and regards
    satya

  • Can I add these two VWIC2 modules on a Cisco 2801?

    Hello all,
    Can I add both of these modules on a Cisco 2801 running 12.4(3h)?
    VWIC2-2MFT-T1/E1
    and
    VWIC2-2MFT-G703 
    Thank you,
    Nadeem

    Thanks for the response, but it doesn't really address my question(s).
    Obviously, if I were buying memory for the old iMac, I would buy the same speed as the one already in it.  However, I am not buying memory, I already have this spare faster memory.   Let me split the question in two:
    1.  Will the faster memory work on the slower iMac?
    2.  Can the faster memory damage the slower iMac?

  • How to add text in print module in LR4?

    want to add text twice in print module, seems only option is identity plate and it cant be duplicated, any suggestions?

    yea i hear ya, but like i made a custom photo strip and another one right next to it so there are two vertical photo strips that after being printed will be cut down the middle.  i want to have text (or identity tag) at the bottom of each photo strip (again, will be printing two on one page).  Best thing i have come up with so far is dinking around with text in word (duplicate text so it would show up twice) but its kinda an issue with spacing and everything.  Sucks you cant just add a box anywhere on there and input what you want (unless there is a way and just cant figure it out).  Again, in "custom package"

  • FA Add-On and Standard Module Integration

    Hi all!
    Just want to know whether there are links between the purchasing module and the Fixed Asset module.  Recently I make a purchase order for a fixed asset. Then proceed to GRPO and A/P invoice. 
    Having all this process completed, I made a fixed asset acquisition (with vendor) in the FA add-on module. What suprise me was that the same vendor was credited twice! ( First during the invoice issued and secondly after the fixed asset was acquired in the add-on module) 
    Does it means that the fixed asset add-on and the standard module are not integrated or whatsoever... Anyone can answer this?
    regard,
    Izzu

    Hello,
    I am sure that FA addon was not not intended to have a link between PO in the standard of SBO and fixed assets although there is option asset account in Business Partner master data. It seems as if the asset could be bought and sold meanwhile in practice it is not applicable.
    You could download file relate to fixed asset from documentation resource center to know more about it : https://websmp108.sap-ag.de/smb/sbo/documentation
    or looking for another addon relate to fixed asset that developed by "clever" partner in http://cpsn-channel.sap.com
    Rgds,
    Rgds,

  • ADF Libary Issue - Application Module disappear from data control

    Hi All,
    I am facing an issue while adding an Application module to an ADF project as an ADF libray.
    I have two applications - ADF Application1 with Model1 project having an Application module AM1, ADF Application2 with Model2 project having an Application Module AM2
    I have created an ADF library jar file of Model1 project.
    When I add it to Model2 project, the Application Module AM2 of Model2 disappears and Application Module AM1 from the library appears in data control.
    Please suggest what could be wrong.
    Regards,
    Rekha

    Hi,
    verify that both application modules don't share the same ID in their databindings.cpx file. Which release version of JDeveloper 11g are you on ?
    Frank

  • WWI issue: function module with symbol doesn't work in conditional output

    Hi,
    I have created a function module to be used in combination with a symbol that represents the quantity of a composition item in a composition. In some cases a average quantity is not filled and the function module calculates the quantity based on the lower and upper limit of the composition item. This function works perfectly if managed in customising with a symbol or called with a symbol in WWI. When displaying the result of the symbol in a WWI word template it shows the expected value.
    However when I use the symbol with a function module (or the customised symbol with function module) in a conditional output expression, the value it represents in the expression is always equal to zero. It seems that a symbol value that is calculated using a functional module is not calculated properly when used in a conditional output expression. Setting a break in the functional module always shows the correct value, but the value as I already told, is not seen by the conditional output expression. Within the expression the value is always equal to zero.
    Does anyone know if this is a known issue in WWI? Is there any solution to handle this problem? I hope anyone can help.
    Thanks,
    Paul

    Dear Paul,
    only some add on high level ideas:
    if you look at:
    Example: Layout of an Abridged Material Safety Data Sheet - Basic Data and Tools (EHS-BD) - SAP Library
    you find the standard example of SAP for master and slave group:
    2  <11BRG003 (M,SAP_EHS_1012_004;*)> ¶
    3  <03EHS_L_TEXT(CED
      -SDB-01.002)> ¤
    <03EHS_L_TEXT(CED-
    SDB-02-07)> ¤
    <03EHS_L_TEXT(CED-
    SDB-02-05)> ¤
    4  <11BRG002 (S:POS;*)> ¿
    5 <01GESTRIDENT(I:NAM,
    6  IUPAC,;*)> <11ERG002>¤
    7
    8
    9
    <11BRG002 (S:POS; *)> ¿
    <01G1023001R2(C;*)
    ><11ERG002>¤
    <11BRG002 (S:POS;*)> ¿
    <01GESTVPRECL>
    <01GESTVCOMPL(N:" ZZ9,9")>
    <01GESTVCOMPE>
    <11ERG002> ¤
    10  <11ERG003>¶
    The "issue" is that you need to analyse by "line" of POS group; or precisely: it is easy to print lower, upper and average value if it exists.
    In conditional output this example is shown in SAP help:
    <15BIF001(AND:01G1013005VA GE 1)><01G1013005VA(;*/TL)[D:Value]>
    <15CIF001><03EHS_L_TEXT(CUST-100000000000031)[D:Density is less than 1]>
    <15EIF001>
    I believe you need a "clever" nesting together with your customer symbol
    E.g. you need first "test" the contents of the three values and decide about result
    The easiest way could be to use a "table" structure as above.
    Just use column header "lower"; "average"; "upper" value. Then you need to ask your self in which situation what need to printed.
    If you use the table structure and you print just what is there and leave simply lower / upper limit "field" empty if it does not exists (what is bad with this?) you need only this "conditional" output topic done for average value. You could check for: if value > 0.0001 then print the value (as then there is a value); if not use the report symbol in which you calculate something. In my opinion it is worth to try it.
    It is known that you can check "numeric values by using conditional output. I belive tis cintional one des work as well with the "composition" values (lwoer, upper, average),
    May be this approach might help.
    The "stack" examples which are discussed in SAP help and in the links shown are related to "characteristic" values of classes and not for composition ones.
    C.B.
    PS: If this really works you can clearly extend your solution. E.g. if lower value is empty may be print "0", If upper valus is empty may be print "100" etc. (or prepare a further costumer symbol calculating something).

  • B2B add on issue

    Hi All , currently we hare installing single stack SAP PO .We are  running very  very late .
    As per client commitment we must install the B2B add on tool in decentralised engine . We are facing the following issue .
    Can not start
    com.sap.aii.adapter.ediseparator.app ( 622677 / 2014 )
    This is related to issue we are facing after the B2B addon support pack upgrade, I have updated the SAP
    message with the required information and waiting for SAP's response.
    We got an unofficial input from one of my friends in SAP that this feature is not possible in decentralised engine. I wish to know , has any one done it in decentralised engine , to be more precise , IS IT POSSIBLE ?
    Thanks and Regards,
    Arnab Mondal.

    Hi Arnab,
    Follow this thread: Error While Upgrading B2B AddOn to SP02
    Seems like they face a similar problem.
    Kind regards,
    Dimitri

  • Trying to add a sign in module, but I need a little code help.

    I am trying to add a sign in, but this is what happens to my page. http://www.blisssurfadventures.com/about.html?Preview=True
    When trying to add in module the page content box only allows me to see a part of my web page.

    Hi,
    I notice the sign in is now already there. What Safari version are you using? I tested on 6.0.2 (the latest) and seems to be working fine. Did you try other browsers?
    Also, looks like you're publishing from muse and using non-web-safe fonts, thus turning your texts into images. That may not be the best way to go, if you want content to be indexed, layout to be flexible, if users might want to select parts of the text, etc.
    Kind Regards,
    Alex

  • Checkbox issue in module pool program

    Hi all,
    I have a small issue in a module pool program using checkboxes. The requirement is that my basic list should contain the data with checkboxes and as per the selection by the user, the selected records should appear in the next screen (secondary list). But after selection, all the records barring the last record is appearing in my secondary list. Below are the screenshots of my program:
    These are the global variables I declared:
    The layout for the  basic list is as shown. The function code is cbox for checkbox.
    The flow logic :
    The code for user-command:
    Now on executing the program,
    As you can see, sales orders 4970,4972,4974 and 4975 are selected. So after clicking NEXT, in the secondary list , the data for these selected sales orders from VBAP table should come up. But instead, the records from 4970, 4972 and 4974 are displayed except the last sales order which is 4975.
    This is happening for all the records. The last selected sales order is not getting selected. Why is it so?
    Thanks.
    Manish

    Hi Ali,
    I have modified the code but there are still a couple of things which are confusing me. In the below screenshot you can see the modified version of the code:
    Now to see what is going wrong, I tried to debug the code. I placed the breakpoint on 'NEXT' as shown. Then I selected the following sales orders and pressed NEXT.
    In the debugger, IT_VBAK1 correctly holds the 2 selected values:
    IT_VBAP displays the values correctly as well.
    Now, this is where the issue is. On clicking the BACK button and selecting another sales order (4974):
    IT_VBAK1 holds the additional sales order 4974 along with the previous ones as well:
    IT_VBAP also displays the values accordingly as per the debugger:
    But in the table control, the sales order 4974 is not displayed. Only the initial sales orders are displayed.
    1) There is nothing wrong with the code as the debugger shows the records are held and displayed correctly by the internal tables. So what could be the reason for the data not to be displayed correctly in the table control? I also tried refreshing IT_VBAP after the BACK button, but still it isnt working. 
    2) Also, another thing I've seen that is after clicking the BACK button, when I select the sales orders, only data from 2 sales orders are displayed in the secondary list.
    For example, if I select any number of sales orders and press NEXT, then all the data are displayed correctly in the secondary list. Once I click the BACK button and deselect all of them and then I checkbox 3 sales orders (more than 2), then only the records for 2 sales orders are displayed, not the 3rd one.   Why is this happening?
    Regards
    Manish.

  • Add Device issue with Bluetooth!

    Hi,
    Earlier, my laptop could not detect any Bluetooth device, however; reading a post on MS community on the subject, I uninstalled all the devices under Bluetooth as shown in the Device Manager. After restart my Bluetooth could detect my devices and add the
    necessary drivers.
    However; I am facing this rather differing behavior on Windows 8.1 Pro. If I try using Add Device option in PCand Devices section of Services Application, it does not detect any device - however; the same devices get detected if I go to Control Panel->Devices
    and Printers->Add Device OR Settings->PC and devices-> Bluetooth
    Logically, I presume Bluetooth devices should also get added under Settings->PC and devices->Devices->Add Device - but it does not.
    Is this some kind of driver issue? Can someone help why this is happening.
    Let me also state that Under the Device manager there are 2 drivers under Others section namely MS-ABTP and MS-TCC that show a little question mark. Property for MS Enumerator under Bluetooth shows use of these drivers.
    Are the above issues linked if independent how do I resolve them?
    Thanks,
    Sachin

    Hi K Sachin,
    What is your current situation?
    Have you tried the solution as Nakii mentioned?
    Please provide a shortcut about device manager for better analyzation.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

  • Add parameter in Function Module

    hi all,
    I'm trying to add a parameter to function module HRGPBS_HER_GET_SURNAME_NINO.
    However, the system is telling me to carry out modification comparison first.
    Can someone guide me on using SPAU or SE95, as I don't understand what to enter in the selection area?
    thanks

    If you go to transaction code: SPAU, you can find the item (program, function module, screen, etc) in question, open the tree to the lower levels. On the lower item, you can choose to save your changes or revert back to original.
    The developers should be able to tell what has been changed. In most cases, we wanted to keep our changes with the exception of when a change was made and later a note was released to produce the same result or if new functionality is released related to the item in question.
    Hope this helps.

Maybe you are looking for