Add RADIUS IETF attribute to ISE System Dictionary

Hello
I'm looking to migrate an ACS5.4 config to ISE. Part of the ACS5.4 config involves:
define a RADIUE IETF attribute in the ACS RADIUS dictionary
inject this attribute into RADIUS requests that are proxied to another RADIUS server.
This works fine in ACS but I can't Add/Modify attributes in the ISE System RADIUS IETF dictionary. Is this functionality roadmapped for ISE?
Thanks
Andy

Forgot to mention that I'm currently using ISE 1.1.3. I fround the following in the new ISE 1.2 documentation:
Cisco ISE also creates dictionary defaults for the IETF RADIUS set of attributes that are also a part of
the system-defined dictionaries, which are defined by the Internet Engineering Task Force (IETF). You
can edit all free IETF RADIUS attribute fields except the ID.
Cisco ISE also creates dictionary defaults for the IETF RADIUS set of attributes that are also a part of
the system-defined dictionaries, which are defined by the Internet Engineering Task Force (IETF). You
can edit all free IETF RADIUS attribute fields except the ID.
I'll upgrade and see if I can edit the attribute that I need.

Similar Messages

Configuring Cisco ISE for Authorization with External Radius Server attribute

Hi,
I'm trying to integrate an external radius server with Cisco ISE.
I created an External Identity Store>Radius Token Server.
I created a Identity Store sequence with just one identity store just as creadted above.
And I was able to authenticate successfully.
But when it comes to authorization.
I observed we just have one tab named Authorization while creating Radius Token server.
And it always refers to ACS:attribute_name.
If I want to define a IETF radius attribute, (lets say class with attribute id as 25), how could I do it.
In Cisco ACS we have a direct entry option in authorization tab where we can define the radius (IETF) attribute within Radius token server creation (within radius token server>Directory attribute tab).
How ever I try to define the IETF attribute here (class,IETF:Class) I am not able to authorize with this attribute value.
I tried with just one single authorization rule where it could hit.But observed it to go the default(as none of the rules defined matches the condition).
Can anyone guide me how can we define a IETF radius attribute for authorization within Cisco ISE and what policy could we set it to work as authorization.
Thanks in advance
Senthil K

This is the step of Creating and Editing RADIUS Vendors
To create and edit a RADIUS vendor, complete the following steps:
Step 1 From the Administration mega menu, choose Resources > RADIUS Vendors.
The RADIUS Vendors page appears with a list of RADIUS vendors that ISE supports.
Step 2 Click Create to create a new RADIUS vendor or click the radio button next to the RADIUS vendor that
you want to edit and click Edit.
Step 3 Enter the following information:
• Name—(Required) Name of the RADIUS vendor.
• Description—An optional description for the vendor.
• Vendor ID—(Required) The Internet Assigned Numbers Authority (IANA)-approved ID for the
vendor.
• Vendor Attribute Type Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute type. Valid values are 1, 2, and 4. The default value is 1.
• Vendor Attribute Size Field Length—(Required) The number of bytes taken from the attribute value
to be used to specify the attribute length. Valid values are 0 and 1. The default value is 1.
Step 4 Click Submit to save the RADIUS vendor.

ISE 1.2 IETF Attribute 88 Framed-Pool not available

Using ISE 1.2 and setting up a new Radius Server Sequence, I am unable to use IETF Radius attribute 88 (Framed-Pool) as it is not displayed in the Radius IETF Dictionary.
Is there a reason for this? Most other IETF attributes are available, I am curious as to why this one is missing
Thanks

Can you please provide me the output of "show version" from ISE CLI.
Regards,
Jatin Katyal
** Do rate helpful posts**

How to add attribute to ISE 1.2

The authentication details page shows under "Other Attributes" an attribute called SelectedAuthenticationIdentityStores
Is there a way I can create rules based on this attribute? I can't find it anywhere in the policy conditions options.
Thanks in advance!

I need to create an authorization condition that includes an external identity source. That does not appear to be an option so I want to add the SelectedAuthenticationIdentityStores attribute so I can create authorization conditions based on which identity store is used.
This would be very simple if ISE would let you choose an external identity source in your second screenshot, but unfortunately it only allows you to select internal identity groups.
Unless I'm missing something? Thank you for the help.
EDIT:
I actually need to create a authorization policy based on the "Identity Store" attribute, see picture. Is there a way to add this to the dictionary?

Add RADIUS attributes under "Group Setup" in ACS 4.2

Hi Security Experts,
I need to add RADIUS attributes for a custom vendor under "Group Setup" page in ACS 4.2. As of now, I see Cisco Aironet RADIUS Attributes,
IETF RADIUS Attributes etc in "Group Setup" page. How can I make sure that the RADIUS attributes for a vendor also appear on that page?
PS: I rate useful posts
Thanks,
Kashish

Under "Interface" you can enable which RADIUS-Attributes you want to display. Probably there's just one checkmark missing for your vendor.
The Options for RADIUS are described here:
http://www.cisco.com/en/US/partner/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/A_RADAtr.html

ACS 4.2 - add RADIUS Attributs

Hello,
I want to add Radius attribut to Radware devices , so I will have the option to grant "read only" permission to users.
as I understand I need to add VSA for the "read only" permission, or configure specific "Service-Type value 255"
in the following picture you can see the required information from Radware:
Thanks

anyone know of that?
Thanks

ACS 5.5 RADIUS OUTBOUND Attributes Injection feature

Hello
I'm having a look at the RADIUS OUTBOUND Attributes Injection feature for the External Proxy service in ACS version 5.5.0.46.
The use case is:
ACS uses the External Proxy service to authenticate wireless users with certain domain suffixes
Sometimes the username Access-Accept comes back with the domain suffix stripped.
The result of this is:
ACS logs a successful authentication with the sent username (with suffix)
ACS sends the Access-Accept to the WLC and the user is listed on the WLC (without suffix)
Subsequent accounting packets for the user appear in ACS (without suffix)
In the past I've used a freeradius proxy server between ACS and the external proxy to 'rewrite' the username in the Access-Accept so that it matches the username origianlly sent in the Access-Request. The code for this looked something like the following.
Post-proxy {
update outer.reply {
User-Name := "%{request:User-Name}"
I'm looking to do the above solely with ACS but I can't see the Radius-ietf username attribute listed under the RADIUS OUTBOUND Attributes Injection feature. Is it possible to rewrite the username attribute in ACS 5.5?
Thanks
Andy

Don't think this can be done in ACS 5.5 when using an External Proxy Service Type.
Interestingly, it appears to be possible with a Network Access Service Type. Under Allowed Protocols there is a tick box for Send as User-Name in RADIUS Access-Accept - one of the options is RADIUS Access-Request User-Name. Hopefully this will be implemented in a future release for External Proxy.
Cheers
Andy

Pack and unpack Radius VSA attributes

Hi
As far as I know there are some methods to pack radius VSA attributes. Here are:
As the part of Cisco-AVPair
26 - VSA
Length
9 - Vendor ID
1 - Vendor Type (Cisco-AVPair Attribute ID)
Attribute Name=Value
In the Vendor Specific attribute ("throught attribute ID")
26 - VSALength
9 - Vendor ID
2 - Vendor Type (Attribute ID)
Vendor Length
Attribute Name=Value
In the Vendor Specific attribute ("throught attribute ID")
26 - VSA
Length
9 - Vendor ID
2 - Vendor Type (Attribute ID)
Value
i.e. with attribute name and witout.
How to understand which attribute needs attribute name in value string?
For example:
26|Length|9|2|Vendor Length|1|h323-incoming-conf-id=82b5fc8cd6f411dfa3c6080027716a9a
26|Length|9|2|Vendor Length|35|h323-incoming-conf-id=82b5fc8cd6f411dfa3c6080027716a9a
26|Length|9|2|Vendor Length|35|82b5fc8cd6f411dfa3c6080027716a9a
which of the methods is right?

Hi,
For the specific VSA you used in the example (h323-incoming-conf-id), (1) is the correct encoding, since Cisco VSA vendor type 1 (also more commonly referred to as cisco AV Pair) is always encoded in strings with the format of "attribute=value". This applies to other cisco VSAs that use string encoding as well. For VSA's that don't use string encoding, eg., fax-pages (vendor type 5, encoding integer), it typically doesn't include the value. You should be able to check that against the vendor dictionary to confirm. Please also see:
http://www.cisco.com/en/US/docs/ios/voice/cdr/developer/guide/cdrdefs.html
Thanks,
Wen

How to add new group attribute in OAM?

Hi,
I'm using SunONE DS 5.2 P4 as my Oracle Access Manager repository. I would like to add some new attributes to Users and also to Groups.
I am able to add the new attributes to users by adding the attributes to the oblixorgperson object class in SunONE DS, and then the new attributes appear in the OAM web admin (under the inetorgperson object class).
I have tried to do similar thing to add attributes to Groups. I have added the new attributes to the oblixgroup object class in SunONE DS, but the new attributes do not appear in the OAM web admin anywhere (e.g., under the groupofuniquenames, etc. object class).
Can anyone tell me how to add new attributes to SunONE DS so that they are available under Groups in OAM?
Thanks,
Jim Lum

Have you added the auxiliary class "oblixgroup" to the Group Manager?
1. Ensure that you have configured the object class or classes that you want to add in the Common Configuration tab.
2. From the Identity System Console, select Group Manager Configuration, then click Configure Group Type.
3. Click Configure Group Type Panels, then click Create.
4. In the topmost menu, select the object class that you want to add.
5. In the Panel Label field, enter the label that you want to display to end users when they view elements from this object class in the Group Manager.
6. Select the Panel Information Is Complete check box.
7. Click Save.
The object class is added. You can view this new object class by clicking the Tabs link in the left navigation pane for Group Manager Configuration.

Cisco WSA : What is RADIUS CLASS attribute ?

Hello !
I am trying to use a radius server Cisco ISE as an external authentication server for WSA. I would like to assign roles for groups of users but i don't understand the meaning of RADIUS CLASS attribute. What am I supposed to write in this field ?
Thank you,
Stéphane Walker

The CLASS attribute is generic, in that you can put anything in it. So you get to decide what you use.
On your RADIUS box, for the users or group that it applies to, set it to something like "WSAAdmin" for admins, "WSARO" for read only users...
Then when you config the WSA, you set them appropriately there...
But you can really use any string you want to, they just need to match appropriately.
HTH,
Ken

How to add a custom attributes in Oracle HTML Quotes page?

Hi,
Could someone advice on the best way to add a custom attribute in Oracle HTML Sales Quoting page.
As this page is not an OA page, we are not able to use the concept of View Objects using AK Developer.
Thanks,
Arathi

I have a requirement from our end users that all of them requires a shortcut button in toolbar for submitting a request instead of going the normal way in order to submit a single request.
please can any one help me out in solving this query.Any reason you want to use a shortcut rather than using (Requests > Submit) window?
You can use "FND_REQUEST.SUBMIT_REQUEST" API -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_REQUEST.SUBMIT_REQUEST&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
How To Submit A Concurrent Request Set Using Fnd_Request.Submit_Request [ID 382791.1]
How To Set ORG_ID When Submitting A Concurrent Request Using FND_REQUEST.SUBMIT_REQUEST in Release 12 [ID 1383266.1]
Thanks,
Hussein

Error while Installing the Java Add-In for an Existing ABAP System

Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran Chebrolu

Hi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag

Add a new attribute.

I would like to add a new attribute to the membership.xml, what can i do to create the new attribute in the directory server and then add it to the form of autoregister?

Can you restore your DAI service by restoring LDAP entries with ums.xml or umsExisting.xml files. One of them should be backed up before modification. If you didn't, then you can restore it from another installation.
Follow the steps:
0) Delete Membership using amadmin -r Membership
1) Restore old file Membership: amadmin -s <file.xml>
2) Delete DAI Service entries
3) use amadmin -s ums.xml or umsExisting.xml to populate entries under DAI branch
4) restart the service (web srv: stop && start; appsrv: asadmin stop-appserv && asadmin start-appserv)
Try to login again and to create a new account.
It should work.

Add a new attribute for user provisioining on SAP R3

Hi,
I want to add a new attribute for user provisioining on SAP R3.
- I have added new attribute in Process form and Resource form
- I think i need to add this attribute in lookup definition of SAP attributes also need to do mapping
but i am not finding lookup definition of SAP attributes .
What will be name of lookup definition of SAP attributes? (In case of AD, we have AtMap.AD).
Can any body please help me?
Thanks

Hi,
You cannot add custom fields and do provision or recon for it.I have opened the SR with Oracle and this facility will be available in 9.1. which is launching after 4 months.You need to request the source code and modify it to get the custom fields.
Thanks

How can I add a custom attribute to a catalog area? (CRM Isa Sales)

Gents,
How can I add a custom attribute to a catalog area? (CRM Isa Sales)
Actually I would like to use the Catalog Area Type (maintained in trx COMM_PCAT_ADM on Catalog Area Header level). This field doesn't seem to be available in J2EE webshop. (The field documentation says it is for documentation purposes only so I don't expect it to be transferred).
As this field is not readily available, I would like to add is as an attribute to the Catalog Area. BADI's PCAT_IMS_FEED_ATT and PCAT_IMS_FEED_VAL seem to indicate that it should be possible to add additional fields not only on product level, but also on Area level:
Example implementation code:
method IF_EX_PCAT_IMS_FEED_ATT~READ_NEW_FIELDS.
* Example, how to add new attributes to a indexcategory
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' carries the attributetype ('S'tring, 'I'ntegar or
* 'F'loat)
* Structure 'IS_OBJECTS' carries actuall identifiers
data: ls_fields        type comt_pcat_ims_feed_ux.
case iv_level.
    when 'C'.                        "Category Level
*     no new field
    when 'P'.                        "Product Level
      ls_fields-field = 'CUSTOMER_EXIT_FIELD'.
      ls_Fields-value = 'S'.
      append ls_fields to ct_fields.
*     exproduct fields
      ls_fields-field = 'REMAN_ABL'.
      APPEND ls_fields TO ct_fields.
      ls_fields-field = 'EXCH_BUS'.
      APPEND ls_fields TO ct_fields.
endcase.
endmethod.
However, when I create an implementation and add some code in the when 'C' part, the attributes do not seem to get transferred. (I've checked in the debug mode of the developer studio).
- My example code:
METHOD if_ex_pcat_ims_feed_att~read_new_fields.
* Possible levels are 'C'ategory and 'P'roduct.
* Field 'VALUE' contains the attributetype
* ('S'tring, 'I'ntegar or * 'F'loat)
DATA:
ls_fields LIKE LINE OF ct_fields.
CASE iv_level.
    WHEN 'C'.                        "Category Level
      ls_fields-value = 'S'.
      ls_fields-field = 'ZTEST'.
       APPEND ls_fields TO ct_fields.
    WHEN 'P'.                        "Product Level
ENDCASE.
ENDMETHOD.
and:
METHOD if_ex_pcat_ims_feed_val~read_new_fields.
CASE iv_level.
    WHEN 'C'.
     ls_fields-field = 'ZTEST'.
     ls_Fields-value = 'Value 1'.
     append ls_fields to ct_fields.
    WHEN 'P'.
ENDCASE.
ENDMETHOD.
In the ABAP debugger, I can see that my code is touched during initial and delta replications, however, after replication, the fields do not show up in the Java debugger.
Any ideas?
regards,
Wilco Menge

Hi,
How can I customize the /bin/wcmcommand or how can I make use of [2] to create a custom WCMCommand?
I think the "formUrl" is to post those input value to the jcr repository?
var createDialog = {
        "jcr:primaryType": "cq:Dialog",
        "id": CQ.Util.createId("cq-createdialog"),
        "title":CQ.I18n.getMessage("Create Page"),
        "formUrl": CQ.shared.HTTP.externalize("/bin/wcmcommand"),
        "params": {
            "cmd":"createPage",
            "_charset_":"utf-8"
I have added a field called "starred"
Moreover, when I using the firebug to trace the post command, I can see that the starred value is posted also.
:status
browser
_charset_
utf-8
cmd
createPage
label
b
parentPath
/content/keyword_elaboration
starred
c
template
/libs/collab/commons/templates/form
title
a
Source
cmd=createPage&_charset_=utf-8&%3Astatus=browser&parentPath=%2Fcontent%2Fkeyword_elaboration&title=a&label=b&starred=c&template=%2Flibs%2Fcollab%2Fcommons%2Ftemplates%2Fform
However, when I go to the crxde to view the node's attribute, the properity starred is not created
Are there anything I did wrong or missing?
Thanks.
Message was edited by: aslkit

Add RADIUS IETF attribute to ISE System Dictionary

Similar Messages

Maybe you are looking for