Add Score and Time in Android Runner Game

HI guys!
I am making a runner game for android and I am working on how to add a score and a timer in my game and I can't figure it out
Please help me in adding a score board and Timer in my flash game >>> http://www.filedropper.com/eggrun
There should be coins for adding scores then a 2mins countdown timer
I am still new in programming. Please help me guys!

http://www.filedropper.com/eggrun_1 on CS5 version.
Please help me guys

Similar Messages

  • Add Obstacle and Health in Android Runner Game

    I am making a runner game in air for android actionscript 3.
    It has two buttons. One for Jumping and one for running. It runs to the right.
    As my character runs to the right the background also scrolls to the left.
    Now the problem is I need to add some obstacles for the character. The character needs to jump on it to avoid losing life.
    How can I add a obstacle and a health bar T_T. Also can the obstacles be on random so that the user won't predict where the obstacles are.
    Help me please! I can't figure it out

    This one works.   http://www.filedropper.com/runner
    Just hold down the right_btn to move then you will get to the point where the obstacle are showing up.
    I already have the random codes for the obstacles but the problem is i dont't know the conditionals to use. It's on function oneneter ad addObj (bgA);
    I need to put conditionals on addObj(bgA);
    When the obstacles appear it never stops and is very fast. I don't know what conditionals to use. Help me
    Please help me to get the conditionals sir!

  • How to add Score and Timer in Adobe flash

    Hi guys I am making a android game. I am new in actionscript programming and i can't find to get this right.
    I need to have a score and timer in this game >>> http://www.filedropper.com/eggrun
    It should have coins for adding the score and a countdown timer for it's gaming time.
    When the countdown timer goes to zero. The game stops then the stage will remove the game scene then a new layer will pop up with the total score in it.
    Please help me guys
    I am nowhere close to getting this right.

    There are many ways to do countdown timer. Here are two examples to countdown from 60 seconds to zero. Theoretically they should work the same, but practically not always. Since heavy processing can slow down frame rate and hence method #2 will not be accurate. Really depends on your need.
    #1, using Timer class
    var delay:Number = 1000; //the delay between timer events, in milliseconds.
    var remainingTime:int = 60;
    var countDownTimer:Timer = new Timer(DELAY);
    countDownTimer.addEventListener(TimerEvent.TIMER, countDownUpdate);
    countDownTimer.start();
    function countDownUpdate(evt:TimerEvent):void{
         //1 second passed, do something
         remainingTime--;
         if(remainingTime == 0){
              //60 seconds passed, do something
              countDownTimer.stop();
              countDownTimer.removeEventListener(TimerEvent.TIMER, countDownUpdate);
    #2, using onEnterFrame event
    var frameCount:int= 0;
    var remainingTime:int = 60;
    addEventListener(Event.ENTER_FRAME, countDownEnterFrame);
    function countDownEnterFrame(e:Event):void{
         frameCount++;
         if(frameCount == Stage.frameRate){
              //1 second passed, do something
              frameCount = 0;
              remainingTime--;
              if(remainingTime == 0){
                   //60 seconds passed, do something
                   countDownTimer.stop();
                   countDownTimer.removeEventListener(TimerEvent.TIMER, countDownUpdate);
    As for your score part. It really depends on what exactly you're looking for. There are a lot of ways to do it, and for each way to do it there are even more methods to implement it. Maybe you can try to describe in more details of what you have in mind, so people can help you easier. Don't worry if one method doesn't work for you, since there are so many ways to do things in Flash with AS3. Good luck

  • Need help for Flash quiz with score and timer

    Greetings, I need to urgently create a flash
    game with 10 questions, 3 answers per question. At the end of the
    quiz I need to get the time the quiz was completed for, what answers the player answered correctly and the time its completed into a database, + a couple of fields like name and phone that the user fills also needed to be added into db with the score and time. I need it by the end of tomorrow and I do realise i dont have the knowledge to make it, So if there is anyone that wishes to help or trade services I can give you back the favour by creating some html/css/web design content for you. Thanks in advance and please excuse me for my terrible english.

    download flash cs6 and use it to publish your ad or expand flash cc's publishing capabilites.  if you have a flash cc subscription you can download and use flash cs6 after logging into your cc acount.
    here's how to expand publishing capabilites of flash cc: http://forums.adobe.com/message/5511080#5511080#5511080

  • Get-Content and add Date and Time in a new file

    Hello,
    in a existing file I have data like:
    1;Idle
    5;chrome
    1;spoolsv
    Now I need to grab the content and add date and time in front of each line and save it to another file like:
    07.04.2015;10:18;1;Idle
    07.04.2015;10:18;5;chrome
    07.04.2015;10:18;1;spoolsv
    But I don't have any idea how I could solve this challange. Does anyone have a helping hand for me?
    Greetings

    Hello,
    If you need a new file with the desired output try this
    get-content .\current.txt | Foreach-Object{ $dntv = (get-date) ; "$dntv" + $_} | Out-File newfile.txt
    regards,
    V
    Venu

  • Seeking advice on score "bug"/timer for a soccer game

    I just completed my first FCP project, my daughter's soccer game. I wanted to emulate a professional sports broadcast, that has the score "bug" & timer at the top of the screen and a graphic for each goal scored, naming the goal maker and primary/secondary assists.
    I finally got it to work, but there was a lot of manual/tedious effort. I was curious if any FCP pros might want to suggest more efficient way or better tools which would tighten up this process.
    To product the bug, I created a file in photoshop and then scaled and moved it with the motion tab. I left the score areas and time area blank, just filling in the team names. This was in it's own track above the video. Then I created 2 text generators, 1 for the home score and 1 for the away score and co-located w/ the photoshop graphic each again in their own video track. Each time the score changed I had to duplicate tracks and resize the duration and change the text to reflect the goal.
    I used "Counter Display" (http://web.mac.com/piero.fiorani/PieroFFCE_Effect/CounterDisplay.html) to display the "game time" co-locating it above its slot in the bug, in it's own video track.
    Producing the goal graphic was similar, and resulted in 3 more video layers. Wow, this was so easy in iMovie and took so much longer in FCP, admittedly with infinite precision.
    Is this the best way to do this? Is 9 video layers common for the duration of you video typical?
    Thanks

    Id suggest using a number of panels and a layout manager to help sort out the HUD and the display. Consider havaing a specific JPanel for the HUD and another JPanel fot the display and use somethig like a BorderLayout to place them on the frame.
    So in the JFrame
    JPanel hud = new JPanel();
    JPanel mainDisplay = new JPanel();
    this.getContentPane().setLayout(new BorderLayout());
    this.getContentPane().add(hud, BorderLayout.SOUTH);
    this.getContentPane().add(mainDisplay, BorderLayout.NORTH);this will allow you to easily seperate the functionality of the two panels.
    Id suggest to experiment with a few different layout managers till you can get the functionality you need. The best ones IMO are BoxLayout, FlowLayout, GridLayout and BorderLayout
    Using JLabels will probable be the easiest way to go. To place Components anywhere onto a panel, i would suggest using the null layout and settong the bound pf the labes before adding them to the panel.
    in the mainDisplay Panel
    this.setLayout(null);
    JLabel label = new JLabel();
    label.setIcon(new ImageIcon("some image"));
    label.setBounds(x,y,width,height);
    this.add(label);There will be nothing stopping you from having the enemies as JLabels aswell as you can add any listeners onto JLabels. With buttons you might have an annoying border around them which you will not want.
    Hope this helps

  • Add Date and Time Stamp to video from AVCHD folder

    New to this software and forum, so I apologize if this has been asked and answered. I am trying to insert the date and time metadata from the AVCHD folder using the .mts clips. Curently I am using VaTS to stamp the video then render the clips through Power Director. I would appreciate any help on this topic. Thank you for your time

    BenB, thanks for responding to both of my posts. The footage was shot using a Sony HDR-XR500 AKA consumer video camera. Date and time is not burned into the image when captured digitally. The only way to do it would be to run the video through a video capture device that basically just records what the video outputs. This solution really ***** so i'm looking for somthing more effective.

  • Add Date and Time in OBIEE

    Hi ,
    I have two columns in my Physical Table Source, DELIVERY_DATE (contains the date) and DELIVERY_TIME (contains time in hh:mi:ss) ; and I would now like to create a new Logical column to add both DELIVERY_DATE & DELIVERY_TIME to derive DELIVERY_DATE_TIME.
    Not sure how to do this in Administrator, please anyone can help me with the OBIEE function.
    Regards
    B

    Hi,
    I just realised that both DELIVERY_DATE and DELIVERY_TIME are Varchar fields so I believe the logical column expression should be something like this:
    TO_DATE(DELIVERY_DATE, 'DD-MM-YYYY') || TO_DATE(DELIVERY_TIME,'hh:mi:ss'). Is this correct?
    Thanks
    B
    Edited by: Bees on 29-Jun-2010 02:09

  • "Unexpected error" (s) trying to add Extreme and Time Capsule to existing apple network

    Hi, I am running an Airport Extreme as Base Station, plus an Airport Extreme and and two Time Capsules (serving different computers) extending the network. Everything network wise crashed last night and I have managed to factory reset the Base Station and one Time Capsule by creating a completely new network. I can see the other AE and TC in Airport Utility but overtime I try to connect them it shows 'Unexpected Error'. I have tried factory reset.Any thoughts as to the best methodology for success please? Thanks in advance.

    Thanks for the reply. Eventually I created another new network all via the iMac, and got the AE base station and the two TCs working, but the other AE defied my best efforts...until I was connecting my iPad to the new network and decided to use the Airport Utility on the iPad. For some reason that worked. Can only assume some network conflict or similar software issue. I hate not knowing the root cause, but at least it's working. Cheers.

  • Hi all, can someone please help. I'm trying to transfer Game Center data (games, achievements/scores and friends) to a new Game Center account. Thank you in advance :)

    Trying to transfer all Game Center data to a new Game Center account. Thank you in advance. Much appreciated.

    I am having the same problem
    after the update to 5.0.1
    I mean updating shouldn't become a task that everyone will dread

  • How to make a date and time

    Hi all
    Would you mind tell me about that how to add
    date and time in to GridBagLayout?
    Thank you.

    Hi,
    For Date and Time, look into java.util.Date or java.util.calender.
    For displaying use a label, set text with the Date and time , add into the GridBagLayout.
    Thats it..
    Rajesh

  • Capturing User Id and Time

    Hi All,
    I need to keep track of the user ID and Time for the data entered through a web interface.
    Please suggest the way to achieve this.
    Thanks,
    Deepthi.

    Hi Deepthi,
    there is a how to paper: How to Line Items in SEM-BPS.
    It describes how to add user and time to each dataset enterd/changed.
    Best regards
    Steffen

  • If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load

    If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load the tabs or if it does and I then try to add the game or any other site at all on a tab it causes firefox to stop working (though not close) and I have to restart opening and closing it many times to get it to work at all.

    1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
    CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

  • Does Time Capsule and Time Warner Cable Road Runner work together?

    I have Time Warner Cable Road Runner internet serve. I am currently using a Linksys WRT54G WiFi router to use my internet with my MacBook Pro. I am thinking about replacing my Linksys with a Time Capsule. Will the Time Capsule work with TWC Road Runner? I have looked all over with google and have not found an answer. I heard that you can't clone the MAC address of the Road Runner modem. To get my Linksys to work I had to clone the MAC address. Is this true?

    I use time warner road runner ripoff and also have it hooked to my vonage router,a linksys with 2 telephone ports and 4 additional ports one of which is given to the TC, another to slingback and another to xbox and finnally he network printer.
    The Linksys router , I believe is the main router and the TC is added on as a secondary router ad you choose this during set up, it can either be visible or invisible extending your present wireless setup.
    After much tinkering I managed to get it working on the network, the TC that is seen by both my MacPro's and my OQO UMPC that is running Vista. I also hooked the TC up to a USB hub, another linksys, and attached a 1.5 GB Maxtor external drive. I plan to add another so I will have a total of 4 GB of storage.
    The main problems I have encountered is my Mac pro seeing the configuration after going to sleep, seems to take a really long time and sometimes I have to restart the TC.
    So far all I can say is it IS NOT as easy as Apple would like us to think it is. A lot of tinkering, and you should have a tad of knowledge of what your doing or your going to screw it up. Patience helps as well.
    cheers.

  • Right now I'm using version 3.6 somthing, but I would love to update, but I'm nervous cause last time I did my Add ons and Ext that I use didn't work. How would I know if my add ons and exts are compatible with a new version?

    I'm using version 3.6.24 (whatever the latest update was that just took place 2 days ago for the 3.6 Version) What I would like to know is if I update to a newer version like 7 or 8, whichever is not a Beta, how will I know if my add ons and extensions will work? Last time I had updated to a newer version, non of my favorite add ons or extentions would work, so I went back to 3.6. Can you please help cause something needs to be done cause my Firefox crashes a lot when Adobe is being used.
    I also don't know if any of my add ons are crashing my computer. Either Adobe crashes or my whole computer crashes. Can someone please help me?

    you can find which addon are compatible with Firefox 8 by here
    * https://addons.mozilla.org/en-US/firefox/compatibility/10.0

Maybe you are looking for