Add Date and Time in OBIEE

Hi ,
I have two columns in my Physical Table Source, DELIVERY_DATE (contains the date) and DELIVERY_TIME (contains time in hh:mi:ss) ; and I would now like to create a new Logical column to add both DELIVERY_DATE & DELIVERY_TIME to derive DELIVERY_DATE_TIME.
Not sure how to do this in Administrator, please anyone can help me with the OBIEE function.
Regards
B

Hi,
I just realised that both DELIVERY_DATE and DELIVERY_TIME are Varchar fields so I believe the logical column expression should be something like this:
TO_DATE(DELIVERY_DATE, 'DD-MM-YYYY') || TO_DATE(DELIVERY_TIME,'hh:mi:ss'). Is this correct?
Thanks
B
Edited by: Bees on 29-Jun-2010 02:09

Similar Messages

Get-Content and add Date and Time in a new file

Hello,
in a existing file I have data like:
1;Idle
5;chrome
1;spoolsv
Now I need to grab the content and add date and time in front of each line and save it to another file like:
07.04.2015;10:18;1;Idle
07.04.2015;10:18;5;chrome
07.04.2015;10:18;1;spoolsv
But I don't have any idea how I could solve this challange. Does anyone have a helping hand for me?
Greetings

Hello,
If you need a new file with the desired output try this
get-content .\current.txt | Foreach-Object{ $dntv = (get-date) ; "$dntv" + $_} | Out-File newfile.txt
regards,
V
Venu

Add Date and Time Stamp to video from AVCHD folder

New to this software and forum, so I apologize if this has been asked and answered. I am trying to insert the date and time metadata from the AVCHD folder using the .mts clips. Curently I am using VaTS to stamp the video then render the clips through Power Director. I would appreciate any help on this topic. Thank you for your time

BenB, thanks for responding to both of my posts. The footage was shot using a Sony HDR-XR500 AKA consumer video camera. Date and time is not burned into the image when captured digitally. The only way to do it would be to run the video through a video capture device that basically just records what the video outputs. This solution really ***** so i'm looking for somthing more effective.

How to make a date and time

Hi all
Would you mind tell me about that how to add
date and time in to GridBagLayout?
Thank you.

Hi,
For Date and Time, look into java.util.Date or java.util.calender.
For displaying use a label, set text with the Date and time , add into the GridBagLayout.
Thats it..
Rajesh

How do I add the capture date and time to the bottom corner of a photo?

How do I add the capture date and time to the bottom corner of a photo?

Not to the bottom, that I'm aware of, but to the top right or left in Grid view or to the top left in Loupe view. It is in the View Options.

Hello everyone, How do I add by default a date on the actual E-mail page the date and time of when I have sent the e-mail ? Thank you very much for your suggestions. Kind regards, Christopher H. Bull, Birmingham, UK.

Birmingham, Thursday 2. Feb. 2012
To whom it may concern,
I have an issue regarding the e-mail system, and I wanted to know how I can add a default that the date and time is added automatically to the E-mail page everytime I draft a new e-mail.
Does anyone know how do create a "plug-in" to enable me to have the date and t ime posted on the e0-mail page every time i send a new e-mail ?
If there is a plug in which is compatible with Lion iMac computers thart insert the date and time into every E-mail I send ?
Kind regards
Christipoher H. Bull
E-mail: [email protected]

This supports macros and variables, it doesn't specifically state date and time, but if it supports variables I'd be surprised if it didn't have variables for those:
http://email.about.com/cs/mailplugins/gr/mailtemplate.htm
This one also supports variables and may do what you want:
http://itunes.apple.com/gb/app/logical-mail-free/id451881152?mt=12
You may want to look for more, I found those by googling 'mac email templates variables'.

I have a 4s Iphone and want to add a date and time stamp to photos taken on the regular camera installed on the phone. Does this require a separate app?

I have a 4s iphone and want to date and time stamp photos taken with the regular camera installed on the phone. Does this require a separate app?

For such to be visible, yes. Many such apps in the app store.

Date and Time in Sender File Adapter Target Directory

Hi there,
is there a way of using Date and Time from XI to the Target Directory naming? To use variable substitution some fields of the message had to contain that date and time information, which is not our case.
For filename you can use "add time stamp" option, but and for target directory?
Thanks and regards,
Henrique.

> <i>Do you have further information on how to perform
> this with shell commands?</i>
> >> You need to write a shell script. This script will
> add the date/time stamp into the folder in the target
> system. This shell script is executed from the File
> adapter. So once the file is written into the target
> directory, then it will rename the directory.
Hi there, Moorthy
We've tried to write that shell script that you mentioned, but now we have a few doubts on how to make it create the proper directory.
In the file adapter, my target directory is "/%var1%/%var2%/", where %var1% and %var2% are variable substitutions, referencing data which comes from the payload. Now, I need the shell script to append "/<Year>/<Month>/" in the target directory. But where to archive the script? If it stays in the root directory, than how to make it create "/<Year>/<Month>/" folders inside a directory which is variable (/%var1%/%var2%/)?
Is there a way of passing %var1% and %var2% as parameters for the shell script?
Thanks a lot,
Henrique.

Odd Date for Current Date and Time

I am modifying a column in a list to get current date and time using =TODAY()+NOW() in the calculated field and get a time that is behind by 1 hour but the date is 4 months 114 years ahead (2128). How can I fix this field?

http://sharepointsolutions.com/sharepoint-help/blog/2011/04/how-to-add-and-subtract-hours-and-minutes-from-date-and-time-fields-in-sharepoint-lists/

How can I display the date and time from the playhead info as a subtitle ?

Is there any way it is possible to display the video capture data and time during playback. I have seen some discussion on creating subtitles to do this, it would be nice if one could simply add a Title template with display fields for playhead information so that it automatically gets created during rendering.
In case you are wondering why on earth anyone would want this, I would like to use this for display on multisport racing videos.
Thanks

There is a Date/Time title in the titles browser, does just what it says...

How to get the most current file based on date and time stamp using SSIS?

Hello,
Let us assume that files get copied in a specific directory. We need to pick up a file and load data. Can you guys let me know how to get the most current file based on date and time stamp using SSIS?
Thanks
thx regards dinesh vv

hi simon
i excuted this script it is giving error..
   Microsoft SQL Server Integration Services Script Task
   Write scripts using Microsoft Visual C# 2008.
   The ScriptMain is the entry point class of the script.
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Runtime;
using System.Windows.Forms;
namespace ST_9a6d985a04b249c2addd766b58fee890.csproj
    [System.AddIn.AddIn("ScriptMain", Version = "1.0", Publisher = "", Description = "")]
    public partial class ScriptMain : Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTARTScriptObjectModelBase
        #region VSTA generated code
        enum ScriptResults
            Success = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Success,
            Failure = Microsoft.SqlServer.Dts.Runtime.DTSExecResult.Failure
        #endregion
       The execution engine calls this method when the task executes.
       To access the object model, use the Dts property. Connections, variables, events,
       and logging features are available as members of the Dts property as shown in the following examples.
       To reference a variable, call Dts.Variables["MyCaseSensitiveVariableName"].Value;
       To post a log entry, call Dts.Log("This is my log text", 999, null);
       To fire an event, call Dts.Events.FireInformation(99, "test", "hit the help message", "", 0, true);
       To use the connections collection use something like the following:
       ConnectionManager cm = Dts.Connections.Add("OLEDB");
       cm.ConnectionString = "Data Source=localhost;Initial Catalog=AdventureWorks;Provider=SQLNCLI10;Integrated Security=SSPI;Auto Translate=False;";
       Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
       To open Help, press F1.
        public void Main()
            string file = Dts.Variables["User::FolderName"].Value.ToString();
            string[] files = System.IO.Directory.GetFiles(Dts.Variables["User::FolderName"].Value.ToString());
            System.IO.FileInfo finf;
            DateTime currentDate = new DateTime();
            string lastFile = string.Empty;
            foreach (string f in files)
                finf = new System.IO.FileInfo(f);
                if (finf.CreationTime >= currentDate)
                    currentDate = finf.CreationTime;
                    lastFile = f;
            Dts.Variables["User::LastFile"].Value = lastFile;
            Dts.TaskResult = (int)ScriptResults.Success;
thx regards dinesh vv

How to enter a new Date and Time each day in a Numbers Spreadsheet...

Hi... I have finally decided to move away from Excel and really give Numbers a shot... I have an application where each day I first enter the current date and time into a particular cell of a new row and then I enter some data in cells adjacent (in the same row) as that entered date-time. Then the next day I want to again enter the (new) current date and time and add more data next to that new date-time and so forth day after day... You can't use something as simple as =NOW() because then everyday, ALL of the date-times would change to the current time... Nope, now what I want... I just want to be able to EASILY and QUICKLY enter the current date-time value in one call and then have that specific value stay there forever... In Excel, this is accomplished with the keyboard shortcuts of
<cntl> followed by a semicolon (;) for the date
then enter a single space (for separation of date versus time) followed last by
<command> followed again by a semicolon...
So all together that is,
<cntl><;><sp><command><;>
and that puts something like
4/10/2010 9:49:00 AM
in a single cell...
That's what I now want to be able to do in Numbers...
How do I do that??? Do I use the menubar item "Insert Date and Time" and if so, how exactly do I get the current time to show up in the chosen cell??? With formatting??? Is there a keyboard shortcut method like the one I mentioned that works for Excel?? I've perused the manual and though I found lots on date-time, I didn't see how to do specifically what I want to do... I likely just missed it as surely it must be easy to do...
Any feedback would be much appreciated... thanks... bob...

Badunit wrote:
The result of running that script is "UI Enabled = TRUE".
I have cells named by the header values.
This may be the problem.
The script is an old one which deciphered only the letter+digit cell references.
Here is a new version which works with every kind of cell reference.
--[SCRIPT insertDateTime]
Enregistrer le script en tant que Script : insertDateTime.scpt
déplacer l'application créée dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Placez le curseur dans la cellule qui doit recevoir la date_heure
menu Scripts > Numbers > insertDateTime
La cellule pointée reçoit la date_heure.
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
+++++++
Save the script as a Script : insertDateTime.scpt
Move the newly created application into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Put the cursor in the cell which must receive the date_time.
menu Scripts > Numbers > insertDateTime
The pointed cell receives the current date_time.
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Yvan KOENIG (VALLAURIS, France)
2009/03/01
2010/04/11 is now able to treat every kind of cell references
property theApp : "Numbers"
--=====
on run
set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
my doYourDuty(colNum1, rowNum1, tName, sName, dName)
end run
--=====
on doYourDuty(c, r, t, s, d) (*
c = columnIndex
r = rowIndex
t = table's name
s = sheet's name
d = document's name *)
local cdt
set cdt to my cleanThisDate(current date) (* the new date_time as a clean date_time *)
tell application "Numbers" to tell document d to tell sheet s to tell table t
set value of cell r of column c to cdt as text
end tell -- application …
end doYourDuty
--=====
on cleanThisDate(dt)
(* ugly code but once I got date_time with milliseconds so if necessary, I drop them *)
local l
set l to my decoupe(dt as text, ":")
if (count of l) > 3 then set dt to date (my recolle(items 1 thru 3 of l, ":"))
return dt
end cleanThisDate
--=====
on getSelParams()
local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
if r_Name is missing value then
if my parleAnglais() then
error "No selected cells"
else
error "Il n'y a pas de cellule sélectionnée !"
end if
end if
set two_Names to my decoupe(r_Name, ":")
set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
if item 2 of two_Names = item 1 of two_Names then
set {row_Num2, col_Num2} to {row_Num1, col_Num1}
else
set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
end if
return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
end getSelParams
--=====
set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
apply to named row or named column !
on decipher(n, d, s, t)
tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
end decipher
--=====
set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
on getSelection()
local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
tell application "Numbers" to tell document 1
repeat with i from 1 to the count of sheets
tell sheet i
set x to the count of tables
if x > 0 then
repeat with y from 1 to x
try
(selection range of table y) as text
on error errMsg number errNum
set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
return {theDoc, theSheet, theTable, theRange}
end try
end repeat -- y
end if -- x>0
end tell -- sheet
end repeat -- i
end tell -- document
return {missing value, missing value, missing value, missing value}
end getSelection
--=====
on decoupe(t, d)
local l
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to ""
return l
end decoupe
--=====
on parleAnglais()
local z
try
tell application theApp to set z to localized string "Cancel"
on error
set z to "Cancel"
end try
return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
It's available on my idisk :
<http://public.me.com/koenigyvan>
Download :
For_iWork:iWork '09:for_Numbers09:insertDateTime.zip
Yvan KOENIG (VALLAURIS, France) dimanche 11 avril 2010 14:16:41

CR 8.5, how can I pass just the date, when it wantes date and time?

I have a stored procedure that is passes a date parameter.
When CR prompts me for the date, it also wants the time.
Either I have to pass CR the time of get CR to just look at the date.
When I run the report with a date and time, CR returns no records.
When I run the SP in a SQL query with just the date, it returns data.
I'm CR 8.5 and MS SQL Server 2005
Any advice would be appreciated.
Thanks
Kelvin

You can pass the parameter values as follows for datetime.
01/31/2008 00:00:00 which will returns the data in the report.
If you either not interested to pass the time everytime, you can achieve it through Add Command option in the datasource expert and trigeer the SP. (i'm not sure Add Command is available with CR 8.5)
Hope this helps!!

Incrementing a string number for date and time

There are probably a lot of ways to do this, but I only want to use a bunch of if - else loops if I really need to.
I have a date and time for input, let's say 2006-04-19 22:00. In Java, if I convert that to 3 integers (year, month, day), it will output 2006-4-19. I need to be able to increment in a loop for every day and month from one date to the next. If I keep it as a string, I won't be able to increment the value though, (at least I'm not sure how). I'm thinking that even if I converted it to an integer and back to a string, that the leading zero would be removed.
I found a post here that said something about formatting the number with 2 numbers, by using:
DecimalFormat format = new DecimalFormat("00");
format.format(1, sb, new FieldPosition(0));
Or is there a way to use the gregorianCalendar stuff that would output the date with all of the zeros in place, while incrementing and looping correctly?
Thanks.

I would get a Date object--you can use java.text.SimpleDateFormat if you're starting with a String--and use that to create a GregorianCalendar. Then you can just call Calendar's add method to add one to whichever field you want. Use the SimpleDateFormat to turn the date back into a String for display again.
Calculating Java dates: Take the time to learn how to create and use dates
Working in Java time: Learn the basics of calculating elapsed time in Java
Formatting a Date Using a Custom Format
Parsing a Date Using a Custom Format

Issue with Date and Time Picker on Windows 8.1 and Office 2013

We are having a issue with the Developer tool in Excel called the Date and Time Picker which puts a calendar field into the spreadsheet where you can select a date from the calendar popup
If we change this date field and then save and close and reopen it reverts back to the previous date before the change was made
If we do the same process on a Windows 7 machine with Office 2013 it saves the changes we made to the Date and Time picker field

Hi jdono2,
I'm using Windows 8 and Office 2013,and I can't reproduce this issue.
Please make sure you have already upgraded to the latest version of excel, try to reregister the MSCOMCT2.OCX.
Also you can try to use another date picker add-in to test this issue.
http://social.msdn.microsoft.com/Forums/office/en-US/36f83f24-cd76-4f8e-aa7b-5f166666e7d3/excel-2013-popup-calendar?forum=exceldev
Wind Zhang
TechNet Community Support

Add Date and Time in OBIEE

Similar Messages

Maybe you are looking for