Add search operator  'NE' (not equal to)

Is it possible to add 'NE' (not equal to) operator to the activity search page. If yes, please let me know how.Right now it has only 'is' operator.

Hi,
I had the time to try it myself today.
Open TX: SM34
There use view cluster CRMVC_DQ
Selecte the entry: KompName = BT ; DQuery Objectname = BTQAct
Click on the lower level on the left, should be named like "Exceptions per attribute"
Select the entry: KompName = BT ; DQuery Objectname = BTQAct ; Attribute Name = STATUS_COMMON
Mark search operator "NE" and save.
Now you are able to do not equal searches for the attribute.
I have tried this in the WebClient and in the BOL Browser. It works.
cheers Carsten

Similar Messages

  • Add search operator NE (not equal) by "user status" in Leads?

    Hi, I added the operator following the procedure
    Open TX: SM34
    There use view cluster CRMVC_DQ
    Selecte the entry: KompName = BT ; DQuery Objectname = BTQLead
    Mark search operator "NE" and save
    I  add the operator, but  both "EQ" and "NE" gives me the same results.
    Who can help me?
    Best Regards

    Hi Carl:
    Thanks for your answer. Could you please explain a little bit more in detail ?
    Thanks a lot in advance!!
    Best regards,
    Cristina

  • How to add  operator NE (not equal) in view BP_HEAD_SEARCH/MainSearch?

    Hi Experts:
    I am usuing CRM 2007.
    In view BP_HEAD_SEARCH/MainSearch I have added some new fields. This is working fine. But the operators of these new fields are all limited to Equal to. I need to add filter option (operator) NE (not equal).
    How can I do this?
    Best regards,
    Cristina

    Hi Carl:
    Thanks for your answer. Could you please explain a little bit more in detail ?
    Thanks a lot in advance!!
    Best regards,
    Cristina

  • Error occurred in deployment step 'Add Solution': Operation is not valid due to the current state of the object

    hi,
      when i was trying to deploy a SP  solution from my vs 2012 solution. this error  is displayed.
    i tried many things like
    1) get the wsp and apply power shell cmds to add and deploy, here also it failed:
    Add-SPSolution -LiteralPath d:\mywsp.wsp
    Install-SPSolution mywsp.wsp -GacDeployment -AllWebApplications -Local
    2) restart the timer services and  do  iisreset and  reboot the server. etc .as mentioned in one of the  the below  blogs:
    http://sharepoint1on1.blogspot.in/2014/04/sharepoint-error-occurred-in-deployment.html
    http://suehernandez.wordpress.com/2011/03/31/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
    http://www.dotnetsharepoint.com/2014/04/error-occurred-in-deployment-step-add.html
    http://social.msdn.microsoft.com/Forums/en-US/63adde23-03cf-4b65-923e-1219da94a780/error-occurred-in-deployment-step-add-solution-operation-is-not-valid-due-to-the-current-state-of?forum=sharepointdevelopmentprevious
    http://www.shakirmajeed.com/error-occurred-in-deployment-step-activate-features-operation-is-not-valid-due-to-the-current-state-of-the-object/
    but even after doing all these steps, the  error still persists!. and am not deploying into a remote server, the dev env is in a VM, where sp 2013, vs 2012, sql 2012  are installed.
    just wanna share one  note:   there is a isue in my search admin component. index was reset due to some reason. and from that time onwards my search full/incremental crawls were not working!
    will this cause an issue in my wsp deployment ? i hope  it wont, still  asking...
    can anyone help me how to resolve this error.because this is a  show stopper for me for the last few days!
    help is highly appreciated!

    This issue cause because of feature activation failure while WSP deployment.
    when you create a WSP using visual studio, it creates WSP package with default deployment configuration settings.
    Please restrict feature activation configuration, this will help you to troubleshoot this issue.
    - Click on Project in WSP and press F4, it will open "Project Properties"
    - set "Active deployment Configuration" - as "No Activation"
    - you can activate this features in required sequence after deployment using Activate-SPFeature
    If my contribution helps you, please click Mark As Answer on that post and Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • Multiple selection in Query Panel. Operator Does not equal generates error.

    Hi,
    I'm using Jdeveloper 11.1.1.4 and creating Oracle Fusion Web Application with ADF Business Components.
    I want to use multiple selection on LOV in ADF Query Panel with Table, but I get the following error
    when I use operator "Does not equal":
    Error: Unsupported model type.
    SelectMany does not support a model of type class java.lang.Integer.
    A simple example:
    Schema: HR
    Generate default Business Components for tables Departments and Employees.
    Model:
    Create List of Values for EmployeesView(DepartmentId)
    List Data Source: DepartmentsView1
    List Attribute: DepartmentId
    Display Attributes: DepartmentName (UI Hints)
    Create View Criteria EmployeesByDepartmentVC for EmployeesView
    Criteria Item:
    Attribute: DepartmentId
    Operator: Equals
    Operand: Literal
    Select "Support Multiple Value Selection" (UI Hints)
    ViewController:
    Create blank JSF Page: showEmployees.jspx
    Drag EmployeesByDepartmentVC from Data Controls to showEmployees.jspx
    Create Query=>ADF Query Panel with Table
    Run application.
    Press Advanced button.
    Select operator "Does not equal" and department names "Administration;Marketing"
    Press Search
    Error: Unsupported model type.
    SelectMany does not support a model of type class java.lang.Integer.
    Note: it works fine with operator "Equals"
    Best,
    Kees.

    Hi,
    I was reading:
    http://www.oracle.com/technetwork/developer-tools/jdev/jdev-11gr2-nf-404365.html#bugs_fixed_in_11.1.2.2.0
    Bugs Fixed in 11.1.2.2.0
    Bug.No. 13508184
    unsupported model type error thrown for multi select view criteria
    I have tested the use case described in this thread with JDeveloper 11.1.2.2.0 but I still get the same error.
    when I use operator "Does not equal":
    Error: Unsupported model type.
    SelectMany does not support a model of type class java.lang.Integer.
    Is there anybody who can tell me more about this bug fix?
    Thanks,
    Kees.

  • Microsoft RMS Add-in Operation is not valid due to the current state of the object

    Microsoft Rights Management sharing application for Windows
    Microsoft Windows 7/Office 2010 Service Pack 2
    Click 'Share Protected'
    Receive the following error message 'Microsoft RMS Add-in Operation is not valid due to the current state of the object'
    Microsoft Windows 7/Office 2013 Service Pack 1
    Works fine
    Any ideas why this is not working?

    Hi lra,
    As per my understanding, I think this issue can be caused by MaxHttpCollectionKeys settings in report manager web.config file.
    For more details, please refer this similar thread to override the default value of MaxHttpCollectionKeys:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cb6ede72-6ed1-4379-9d3c-847c11b75b32/report-manager-operation-cannot-run-due-to-current-state-of-the-object?forum=sqlreportingservices
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How to search for "Kind not equal to Folder"

    I'm trying to set up a Smart Folder with criteria:
    - Last Modifed within last 2 weeks AND
    - Kind is not Folder
    How do you set up Finder search criteria for Kind "doesn't equal" something? All I can find is Kind = All or one thing in particular?
    Thanks for any help you can provide.
    OS X 10.4.8
    Mike
      Mac OS X (10.4.8)  
      Mac OS X (10.4.8)  
      Mac OS X (10.4.8)  

    You'll have to use the Raw Query in order to have boolean operators, such as "is not" or "or" and so on. So do your Command-F, choose Last Modified, then for second criterion select "Other" from the drop down menu and scroll to Raw Query and select it. In the Raw Query field copy and paste this:
    kMDItemKind != "Folder"
    That should do it. The booleans are:
    == equal
    != not equal
    < less than
    <div class="jive-quote"> greater than
    <= less than or equal to
    <div class="jive-quote">= greater than or equal to
    For more information than you will probably ever want to know, you can start here:
    http://developer.apple.com/documentation/Carbon/Conceptual/SpotlightQuery/index. html
    The above comes from the link to Query Expression Syntax.
    Francine
    Francine
    Schwieder
    PS--Hi biovizier, looks like you hit post before I did. Great minds....

  • Is not equal to operator not working properly in obiee 11g

    Hi ,
    I have 5 members in a dimesion ENTITY.gen5 (A,B,C,D,E) .
    nOW , I am using a *"is equal to "* operator in that ,
    ENTITY.gen5 = A;B .
    Which results in a strange error while running the report :
    Socket communication error : was attempted on somthing which is not socket .
    or sometimes ,
    Socket communication error : Oracle BI server is not currently running .
    So , I tried with giving "is not equal to" i.e . ENTITY.gen5 != C;D;E .
    Then , I am getting A,B,C . C is not desired here .
    FYI , I have renamed ENTITY.gen5 member names in essbase once and after refreshing I tried the above .
    OBIEE version : 11.1.1.6
    essbase version : 11.1.2.1
    Thanks in advance

    In EM, go to Weblogic Domain, right click on bifoundation_domain and on the Security menu choose Application Policies.
    Set Application Stripe to obi and click the blue arrow search button.
    Highlight BIConsumer and click Edit.
    Under Permissions locate Resource Name oracle.bi.publisher.scheduleReport. Highlight this and click Delete...
    Click OK (top right corner).
    Now log your user out of OBIEE and back in again, and the option should have disappeared from their New menu.

  • Browse search result does not add up

    We are on SES 10g (10.1.8.4). I did some experiments using the Oracle provided search page at http://server:port/search/query/search and the results does not add up for 'browse search'. Say I have a parent node and three child nodes, I do a browse search using the parent as the context, then do the same with the three children. The sum of number of hits from the three children is not equal to the number of hits from the parent.
    Any idea?
    Thanks,

    The problem is that Numbers cannot tell that G8 is in pence and G9 is in pounds.
    Either:
    Put G8 in pounds (0.969)
    or:
    Change the formula in G9 to =(G7*G8)/100. This converts pence to pounds.
    Don't do both!

  • Saving master page in search template throws error "UserAgent not available, file operations may not be optimized"

    Hi Folks,
    I was trying to save basic search template master page "seattle.master" after making change to the template.
    I have added just "CompanyName" folder and update the line below in seattle.master.
    Change is this : <SharePoint:CssRegistration Name="Themable/CompanyName/corev15.css" runat="server"/>
    When I save it, and refresh page on browser, it shows "Something went wrong" error.
    ULS says the following error : "UserAgent not Available, file operation may not be optimized"
    Pls let us know if there is a solution.
    Any help Much appreciated !
    Thanks,
    Sal
    

    Hi Salman,
    Thanks for posting this issue, 
    Just remove this below given tag and check out. It might be happened that your control is conflicting with others. 
    Also, browse the below mentioned URL for more details
    http://social.msdn.microsoft.com/Forums/office/en-US/b32d1968-81f1-42cd-8f45-798406896335/how-apply-custom-master-page-to-performance-point-dashboard-useragent-not-available-file?forum=sharepointcustomization
    I hope this is helpful to you. If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Not able to add Search Item in Advanced Search Mappings of a Seeded Page.

    Hi,
    For one of the seeded pages (Manager Self Service -> Termination) the Search Item drop down in the Personalization of the Advanced Search Mappings does not show any value. My requirement is too add a new criteria to the Advanced Search and i created an item for Table Layout, Criteria Row. But in Advanced Search i am able to see the Table Layout item but the Search Item does not show any value (even the seeded search items). Any one has faced the same issue?
    I am using Oracle Application Framework version 12.1.1.
    Thanks, Suresh

    Hi,
    Let's verify the followings:
    What browser did you use for your SharePoint? Whether you try to test with other browsers, like Chrome or Firefox.
    What template did you use for the problematic site?
    Whether this issue occurred on other sites or other site collections.
    Whether you could add other OOB web parts.
    What is text web part? Whether it is Content Edit web part.
    Whether other users with full control also meet this issue.
    There is a similar post, please check if it is useful for you:
    http://blogs.technet.com/b/sharepointwarrior/archive/2013/08/15/sharepoint-2013-workaround-cannot-add-web-part-to-community-portal-page.aspx
    Best Regards,
    Wendy
    Wendy Li
    TechNet Community Support

  • Will not export photo. pop up says Some export operations were not performed. This file could not be opened(1). Also when I try to add a key word to ohoto the screen keyboard opens and I do not have a touch screen monitor.I have uninstalled LR6 and re-ins

    will not export photo. pop up says Some export operations were not performed. This file could not be opened(1). Also when I try to add a key word to photo
    the screen keyboard opens and I do not have a touch screen monitor.I have uninstalled LR6 and re-installed and it still does the same thing??????

    <moved from Downloading, Installing, Setting Up to Photoshop Lightroom>

  • BSOD Driver IRQL Less than or not equal to

    I've been trying to install the 64 bit version of windows 7 rc.  when booting from the cd, it goes through 2 loading files screens, then the black starting windows screen, after a brief pause it does to a blue screen of death.  With a Driver irql less then or not equal to.  and lists storport.sys at the bottom for the reason.
    Ive been searching, and found in vista this was a problem with nvidia chipsets(i have), and more than 2 gigs of ram(i have 4).  I'm going to try removing a stick of ram to see if it gets past it, but could there be any other problems causing it.  I also ran the extensive windows memory test, 1 pass through it found no errors.
    Asus p5n 32 e sli
    4 gigs of ram corsair
    nvdia 8600 gts
    wd velociraptor partioned 70 gigs for w7 rc
    core 2 due e4400 2.0ghz

    What I can recommend is you keep the machine's config a bit more "simple" for the installer to be more comfortable with it.
    Use an old systembuilder trick:
    - remove all physical hardware devices from the m/b you can remove, make it completely naked
    - start up the system with the installer with as little as hardware connected as possible
    - when it is OK, shut down, add 1 other hardware piece
    - when that's OK too, add another and repeat this cycle for as many hardware you want to connect
    This makes it possible to diagnose on which hardware config exactly the installer fails or at which point you get the "irql less or equal" error.
    Also make a note for yourself what your default BIOS configuration is, so you can play around with the options and later revert back to them.
    Remember, this RC is a testing system. This is not the RTM yet. We should deploy it as such and only use it for testing deployments. As such it is great (and for free) - at least here it goes like a sun.

  • How to add search help in CJ20N through table TVPA ?

    Hi,
    In CJ20N, i have a requirement to add purchasing delivery address to a wbs element.
    It should be able to add one or several delivery address number to one WBS element.
    It should also be able to search for purchasing delivery address before selecting one.
    I have investigated the partner tab in CJ20N.
    I have created in table TVPA a new partner type "ZA" with value table "ADRC"
    I then went to SPRO :
    - Project System -> Structures->Operative Structures->Work Breakdown Structure (WBS)->Define Partner Determination Procedures and Roles
    -> Here i have created an new partner role "Z9" attached to the partner type ZA"
    -> I then attached my partner role "Z9" to my partner schema "ZSCH".
    While testing in CJ20N, i was able to select my new partner role "Z9" BUT the search help does not work at all !
    It seems that my partner type ZA is not valid until the system accept to take it into account...
    I came across note 24699 which seems to be still valid for my ECC60 system.
    Could somebody explain me step bystep what to implement to make the search help work ?
    Thanks in advance for your help,
    Kind regards,
    Yann

    Hi,
    In CJ20N, i have a requirement to add purchasing delivery address to a wbs element.
    It should be able to add one or several delivery address number to one WBS element.
    It should also be able to search for purchasing delivery address before selecting one.
    I have investigated the partner tab in CJ20N.
    I have created in table TVPA a new partner type "ZA" with value table "ADRC"
    I then went to SPRO :
    - Project System -> Structures->Operative Structures->Work Breakdown Structure (WBS)->Define Partner Determination Procedures and Roles
    -> Here i have created an new partner role "Z9" attached to the partner type ZA"
    -> I then attached my partner role "Z9" to my partner schema "ZSCH".
    While testing in CJ20N, i was able to select my new partner role "Z9" BUT the search help does not work at all !
    It seems that my partner type ZA is not valid until the system accept to take it into account...
    I came across note 24699 which seems to be still valid for my ECC60 system.
    Could somebody explain me step bystep what to implement to make the search help work ?
    Thanks in advance for your help,
    Kind regards,
    Yann

  • Re: Windows 10 search & Edge browser not working

    I also have the same issue. Upgraded from Win 7 SP1 and it was a smooth upgrade. All my existing apps like Skype, Opera browser, anti-virus software, Belarc advisor worked and my Wi-Fi did not disconnect either. The main selling points of this upgrade i.e. EDGE browser and Cortona did not even work one time. I even received a weird message that my trial of EDGE is complete and I had to purchase it through Windows store. I clicked through the store and it was not there either. I went to the MS website and the download is a word document rather than a .exe file for the EDGE.
    The start button cannot be left clicked, only right clicked and the search box would not take anything but air. I tried to find "windows update" link through the control panel and had to give up looking for it. So much for QA of the product.

    I have just upgraded from Windows 8.1 to Windows 10, and at first all was good. Fast startup and a nice user interface. But suddenly I wasn't able to use the Edge browser - it said that it couldn't reach the page. Any page, even though Chrome is fine. I can't type anything into the search bar, and I have to press the start button a few times before it appears.
    Googling gives me a couple of fixes including :
    Run Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"} in an admin-enabled Powershell.
    This didn't work.
    I have a feeling that I have switched off some privacy settings and one of them was needed. But I can't get to the Cortana settings menu to see if it's that, as I can't search.
    This topic first appeared in the Spiceworks Community

Maybe you are looking for