Add WebLogic 8.1 as target fails when AdminServer listens on DNS

We setup OEM 11.1.0.1.0 and added host1.foo.com (Linux VM) as a host. The OEM Agent is up and running on host1.foo.com
This host has a WebLogic Domain 8.1sp6 and its Admin Server listens on adminhost.foo.com (DNS which resolves to a virtual IP).
1) When I try to add the WebLogic Domain 8.1sp6 to the OEM Console using Administration Server Host as host1.foo.com, it failed with the error "No WebLogic Server found on the specified port". See attached screen shot.
2) When try adding the same domain to the OEM Console using Administration Server Host as adminhost.foo.com (DNS), it failed with the error "No domains found on host adminhost.foo.com". See attached screen shot.
Is there a way to make OEM OMS understand the DNS name? What facility OEM provides to handle this OMS->DNS->WebLogic AdminServer flow? Thanks

Found solution for this issue few weeks ago and asked Oracle add this as a note.
1385302.1

Similar Messages

Weblogic.refresh is extremely slow & failing when xmiting JSP to App Servers

          We have a process that calls weblogic.refresh and sends JSP's to application servers.
          It normally runs in 30mins but is now running for 16hrs and then crashes. It is
          taking over 10mins to send each jsp rather than 1 second.
          Has anyone experienced a similar problem ?
          $BMS_JDKHOME/bin/java -Xms128m -Xmx128m weblogic.refresh -url t3://${STY_ADMIN_SERVER_URL}
          -username system -password ${WLS_PW} -application ${APPLICATION} -component ${APPLICATION}
          $FILES_TO_REFRESH >>


Was the managed server where a webApp is targeted alive when you ran weblogic.refresh? If the
          slowness happens when the managed server is down, you need to upgrade to SP3.
          Satnam Jhuti wrote:
          > we use 6.1 SP2 with weblogic_patches1.jar and the libproxy.so from SP3
          >
          > Rajesh Mirchandani <[email protected]> wrote:
          > >What release with service pack are you using?
          > >
          > >Satnam Jhuti wrote:
          > >
          > >> We have a process that calls weblogic.refresh and sends JSP's to application
          > >servers.
          > >> It normally runs in 30mins but is now running for 16hrs and then crashes.
          > >It is
          > >> taking over 10mins to send each jsp rather than 1 second.
          > >> Has anyone experienced a similar problem ?
          > >>
          > >> $BMS_JDKHOME/bin/java -Xms128m -Xmx128m weblogic.refresh -url t3://${STY_ADMIN_SERVER_URL}
          > >> -username system -password ${WLS_PW} -application ${APPLICATION} -component
          > >${APPLICATION}
          > >> $FILES_TO_REFRESH >>
          > >
          > >--
          > >Rajesh Mirchandani
          > >Developer Relations Engineer
          > >BEA Support
          > >
          > >
          Regards,
          Ann
          Developer Relations Engineer
          BEA Support

My iphone 6 plus after updating to IOS 8.2 the touch id doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' .

my iphone 6 plus after updating to IOS 8.2 seems to have a problem with the touch id witch doesn't work neither in home unlock nor in app store and when i'm trying to add a new fingerprint it says ''failed unable to complete touch id setup.Please go back and try again'' . I have multiple fingerprints and none of them appear to work.

Hi Giannis,
If you are having an issue with Touch ID not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
Use Touch ID on iPhone and iPad - Apple Support
Start with the section titled Clean the Touch ID sensor and then Get help with Touch ID.
Thanks for using Apple Support Communities.
Sincerely,
Brett L

WebLogic 12.1.2 fails when injecting extension in jar into bean in same jar

WebLogic 12.1.2 fails when deploying a web application that contains a jar in which an extension is injected into a bean that resides within that same jar. The following exception is thrown:
"weblogic.management.DeploymentException: org.jboss.weld.exceptions.DeploymentException: WELD-001408 Unsatisfied dependencies for type [SampleExtension] with qualifiers [@Default] at injection point [[field] @Inject private test.ApplicationBean.extension]"
weblogic.management.DeploymentException: org.jboss.weld.exceptions.DeploymentException: WELD-001408 Unsatisfied dependencies for type [SampleExtension] with qualifiers [@Default] at injection point [[field] @Inject private test.ApplicationBean.extension]
at weblogic.application.internal.BaseDeployment.throwAppException(BaseDeployment.java:123)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:260)
at weblogic.application.internal.SingleModuleDeployment.activate(SingleModuleDeployment.java:48)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
Truncated. see log file for complete stacktrace
Caused By: org.jboss.weld.exceptions.DeploymentException: WELD-001408 Unsatisfied dependencies for type [SampleExtension] with qualifiers [@Default] at injection point [[field] @Inject private test.ApplicationBean.extension]
at org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:311)
at org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:280)
at org.jboss.weld.bootstrap.Validator.validateBean(Validator.java:143)
at org.jboss.weld.bootstrap.Validator.validateRIBean(Validator.java:163)
at org.jboss.weld.bootstrap.Validator.validateBeans(Validator.java:382)
The problem can be easily reproduced by a minimal case with the following structure:
war-root
     WEB-INF
         beans.xml
         lib
            somejar.jar
And with somejar.jar having the following structure:
test
    ApplicationBean.java
    SampleExtension.java
META-INF
    services
        javax.enterprise.inject.spi.Extension
    beans.xml
ApplicationBean can looks as follows:
@Named
@ApplicationScoped
public class ApplicationBean {
    @Inject
    private SampleExtension extension;
    @Inject
    private BeanManager manager;
    public void myMethod() {
        System.out.println("Extension:" + extension + " Manager:" + manager);
And SampleExtension can be:
public class SampleExtension implements Extension {
    public void onBeanDiscovery(@Observes AfterBeanDiscovery beanDiscovery, BeanManager beanManager) {
        out.println("Extension called");
I published a minimal web application (as Maven multi-module project) that reproduces the case here: https://github.com/arjantijms/inject-extension
This application runs fine on basically every other Java EE server (tried specifically JBoss EAP 6.1, GlassFish 4.0 and TomEE 1.5.2), but not on WebLogic 12.1.2.
Note that I'm not really a WebLogic user. I'm an open source library writer who's trying to make our library (OmniFaces) to run on all Java EE implementations. This case is part of a functionality in our upcoming release.

Hi,
If it is war then try to apply following Patch 13893259.
Regards,
Kal

WebLogic 12.1.2 fails when deploying ear with injecting extension and bean with injection of this extension in ejb

WebLogic 12.1.2 fails when deploying an enterprise application(ear) that contains a ejb in which injected 1) an extension 2)bean with injection of this extension.
The following exception is thrown:
Caused By: org.jboss.weld.exceptions.DeploymentException: WELD-001409 Ambiguous dependencies for type [CdiExtension] with qualifiers [@Default] at injection point [[field] @Inject private test.extension.Bean1.extension].
Possible dependencies [
[Extension [class test.extension.CdiExtension] with qualifiers [@Default]; zip:/domain1/servers/AdminServer/tmp/_WL_user/test/7x6roh/lib/test-extension-0.0.1-SNAPSHOT.jar!/META-INF/services/javax.enterprise.inject.spi.Extension@1[test.extension.CdiExtension@1115deb],
Extension [class test.extension.CdiExtension] with qualifiers [@Default]; zip:/domain1/servers/AdminServer/tmp/_WL_user/test/7x6roh/lib/test-extension-0.0.1-SNAPSHOT.jar!/META-INF/services/javax.enterprise.inject.spi.Extension@1[test.extension.CdiExtension@ed791f]]]
    at org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:314)
    at org.jboss.weld.bootstrap.Validator.validateInjectionPoint(Validator.java:280)
    at org.jboss.weld.bootstrap.Validator.validateBean(Validator.java:143)
    at org.jboss.weld.bootstrap.Validator.validateRIBean(Validator.java:163)
    at org.jboss.weld.bootstrap.Validator.validateBeans(Validator.java:382)
    at org.jboss.weld.bootstrap.Validator.validateDeployment(Validator.java:367)
    at org.jboss.weld.bootstrap.WeldBootstrap.validateBeans(WeldBootstrap.java:379)
    at com.oracle.injection.provider.weld.WeldInjectionContainer.start(WeldInjectionContainer.java:106)
    at com.oracle.injection.integration.CDIAppDeploymentExtension.initCdi(CDIAppDeploymentExtension.java:70)
    at com.oracle.injection.integration.CDIAppDeploymentExtension.activate(CDIAppDeploymentExtension.java:47)
    at weblogic.application.internal.flow.AppDeploymentExtensionFlow.activate(AppDeploymentExtensionFlow.java:37)
    at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:729)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:42)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:258)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:61)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:165)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:80)
Problem can be easily reproduced by a minimal case:
test.ear:
\lib\test-extension-0.0.1-SNAPSHOT.jar
test-ejb-0.0.1-SNAPSHOT.jar
where
test-extension-0.0.1-SNAPSHOT.jar contains:
CdiExtension.java:
package test.extension;
import javax.enterprise.inject.spi.Extension;
public class CdiExtension implements Extension {
    private String someString = "Some String";
    public String getSomeString() {
        return someString;
Bean1.java:
package test.extension;
import javax.enterprise.context.ApplicationScoped;
import javax.inject.Inject;
@ApplicationScoped
public class Bean1 {
    @Inject
    private CdiExtension extension;
    public String get() {
        return extension.getSomeString();
test-ejb-0.0.1-SNAPSHOT.jar contains:
EjbBean.java:
package test;
import test.extension.Bean1;
import test.extension.CdiExtension;
import javax.ejb.Stateless;
import javax.inject.Inject;
@Stateless
public class EjbBean {
    @Inject
    private CdiExtension extension;
    @Inject
    private Bean1 bean1;
    public String getSomeString() {
        return extension.getSomeString() + "\n" + bean1.get();
p.s. i seen same problem in community.oracle.com/thread/2577403 , but it happen in "war", not "ear", and seems successfully patched with patch №17424706

Hi,
It looks like there is patch exists for this issue.
Patch 17198187
Please try to download from the MOS or try to open a ticket with support.
Regards,
Kal

HT2480 hi i am getting message that CANNOT GET MAIL THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5

hi i am getting message that CANNOT GET MAIL THE CONNECTION TO THE SERVER FAILED when trying to add official mail to Exchange in IPHONE 5

Talk to your IT department...
Or if you're at University, talk to the computer team.
Most Uni's are using outlook.com as the server connection not mail.youruniversity.edu

Add Weblogic Server 10.3 in Grid11

Hi,
when i try add WebLogic 10.3 in GC11 on AIX 6.1
https://xxxxxxxxxxxxxxx:7799/em/faces/as/as/domainHome?target=/secFarm_GCDomain/GCDomain&type=weblogic_domain
then
Refresh WebLogic Domain … >>> continue
Then become this error:
Failed to discover WebLogic. Check host,port,credentials,protocol and be sure the server is running and the same farm is not already added. This UI can not be used to discover WebLogic version 7.x to 8.x. Exception: no target found.
When i try https://xxxxxx:7101/console/login/LoginForm.jsp >> weblogic with passwd -> login possible
Domain ist GCDomain
where the mistake or error ?
Thanks
Edited by: user8764037 on 11.05.2011 04:38

I think you should check My Oracle SUpport note:
Error when discovering and monitoring secured weblogic domains on AIX platforms (using t3s/iiops protocols) in EMGC11.1 *[ID 1208874.1]*
Regards
Rob
http://oemgc.wordpress.com

Redeployment fails when using WLP + WLS 10.2 + hibernate

Hi all,
When using WLP, WLS 10.2 version, Oracle 10g database and application which uses hibernate as JPA, redeployment fails:
<10.9.2008 11:44:11 EEST> <Error> <Deployer> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1221036201093' for task '4
'. Error is: 'java.lang.ClassCastException: org.hibernate.dialect.Oracle10gDialect'
java.lang.ClassCastException: org.hibernate.dialect.Oracle10gDialect
at org.hibernate.dialect.DialectFactory.buildDialect(DialectFactory.java:101)
at org.hibernate.dialect.DialectFactory.buildDialect(DialectFactory.java:65)
at org.hibernate.cfg.SettingsFactory.determineDialect(SettingsFactory.java:460)
at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:155)
at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:2101)
Truncated. see log file for complete stacktrace
java.lang.ClassCastException: org.hibernate.dialect.Oracle10gDialect
at org.hibernate.dialect.DialectFactory.buildDialect(DialectFactory.java:101)
at org.hibernate.dialect.DialectFactory.buildDialect(DialectFactory.java:65)
at org.hibernate.cfg.SettingsFactory.determineDialect(SettingsFactory.java:460)
at org.hibernate.cfg.SettingsFactory.buildSettings(SettingsFactory.java:155)
at org.hibernate.cfg.Configuration.buildSettings(Configuration.java:2101)
Truncated. see log file for complete stacktrace
Persistence.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence" version="1.0">
<persistence-unit name="abc_order" transaction-type="JTA">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>abcDataSource</jta-data-source>
<class>xxx</class>
<properties>
<property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect"/>
<property name="hibernate.transaction.manager_lookup_class" value="org.hibernate.transaction.WeblogicTransactionManagerLookup"/>
<property name="hibernate.transaction.factory_class" value="org.hibernate.transaction.JTATransactionFactory"/>
<property name="hibernate.transaction.flush_before_completion" value="true"/>
<property name="hibernate.transaction.auto_close_session" value="true"/>
</properties>
</persistence-unit>
</persistence>
And included persistence libs are:
antlr-3.1.jar
asm.jar
asm.attrs.jar
cglib-2.1.3.jar
commons-collections-3.2.jar
commons-logging-1.0.4.jar
commons-net-1.4.1.jar
dom4j-1.6.1.jar
ehcache-1.3.0.jar
ejb3-persistence.jar
hibernate3.jar
hibernate-annotations.jar
hibernate-commons-annotations.jar
hibernate-entitymanager.jar
hibernate-tools.jar
javassis.jar
jta-spec1_0_1.jar
ojdb14-jar
slf4j-api-1.5.2.jar
slf4j-jdk4-1.5.2.jar
In hibernate.orgs resolution on the weblogic side is add weblogic-application.xml descriptor the following:
<prefer-application-packages>
<package-name>antlr.*</package-name>
</prefer-application-packages>
which helps to this error but then you have to undeploy you application and restart the server before you can deploy the application again.
This slows down the development of applications and in addition of that when your environment has two portal applications it is impossible to deploy both applications in that environment.
Is there any solution for this kind of problems ? Or do we have wrong configuration or librarys in our environment ?

11g PS2 : Deployment fails- ADF page having WebService as a DataControl

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

FTP Put fails when there is no pre-existing file present in the directory

Hi All,
In our process we use the FTP adapter to write a file to a location. This operation fails when there is no preexisting file on the output directory.
So we placed a zero byte file on the directory and tested and the adapter was able to create the output file but when the files were deleted from the output directory the file transfer failed again.
We got the below error
Non Recoverable System Fault :
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Put' failed due to: Invalid Output Directory. Invalid Output Directory. The value specified for the output (Physical/Logical)Directory interaction parameter or jca binding property has an invalid value "XXXXXXXXXXXXXXX" Ensure that the following conditions are satisfied for the output directory : 1) It exists and is a directory (not a file). and 2) It is writable (file write permissions). and 3) If using a logical name, then ensure that the mapping from logical name<->physical directory is correctly specified in the deployment descriptor. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
Kindly help us resolve the issue.
Thanks in advance.
Regards,
Balaji R

Balaji,
This operation fails when there is no preexisting file on the output directory I'm not sure I understood this declaration.
Why do you need to have preexisting file on the output directory?
If it fails, with the mentioned error, it means that something was not defined properly.
OR
Another option is permissions.
Check that your local system user (I guess orabi) has a write permission on the target directory (on the FTP host).
Arik

Unit test runs perfectly fine with NUnit but fails when run from TestExplorer

Hello all,
I have a TestProject, Harmony.Tests. In there, I have a method AddApplicationEvent()
which calls another method Send(InvokeRequestMessage requestMessage) which calls a webservice (OperationHandlerBrokerWebService).
The code snippet looks like this. This is not the complete code but a part where we are calling the web service. It fails on the underlined Italic line of code.
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
brokerService.Url = address;
brokerService.Timeout = timeoutInMilliseconds;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
The same test works and passed fine when I ran it with NUnit, but failed with following exception when I tried to run it from TestExplorer.
Test Name: AddApplicationEvent
Test FullName: N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.AddApplicationEvent
Test Source: d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs : line 665
Test Outcome: Failed
Test Duration: 0:00:00.296
Result Message:
SetUp : Message returned System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.ArgumentException: Invalid token for impersonation - it cannot be duplicated.
at System.Security.Principal.WindowsIdentity.CreateFromToken(IntPtr userToken)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info)
at System.Security.Principal.WindowsIdentity..ctor(SerializationInfo info, StreamingContext context)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct& declaringTypeSig, SerializationInfo info, StreamingContext context)
at System.Reflection.RuntimeConstructorInfo.SerializationInvoke(Object target, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder)
at System.Runtime.Serialization.ObjectManager.DoFixups()
at System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream)
at N4S.Forms.OperationHandlerBroker.AMessage.DeserializeMessage(Byte[] serializedMessage)
at N4S.Forms.OperationHandlerBroker.WebServiceServer.BrokerService.InvokeOperationHandler(Byte[] serializedInvokeRequestMessage)
--- End of inner exception stack trace ---
expected: <0>
but was: <1>
Result StackTrace:
at N4S.Harmony.Tests.TestHelper.InvokeOperation(OperationHandler handler, OperationHandlerInput input, Boolean expectedToWork) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 136
at N4S.Harmony.Tests.TestHelper.LoginAsUser(String username, String password) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 394
at N4S.Harmony.Tests.TestHelper.Login(TestUserName requestedUser) in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 377
at N4S.Harmony.Tests.TestHelper.LoginAsAdvisor() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\TestHelper.cs:line 230
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.Login() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 76
at N4S.Harmony.Tests.CaseManagement.HarmonyFacadeTests.SetupTest() in d:\TFS\TMW\Dev\TMWOnline\Harmony\N4S.Harmony.Tests\CaseManagement\HarmonyFacadeTests.cs:line 67
I am not sure what causing the issue. I checked the Credentials, Windows Identity during both the test run and there is no difference. Please advise !!
Thanks,
Deepak

Hi Tina,
Thanks for your reply.
I do have NUnit adapter installed. I even noticed that the test runs fine with NUnit GUI and also if I run it through Resharper Test Explorer window.
As you can see in the image above the same test is passed when I ran it from Resharper Unit Test Explorer window but fails when I ran it from Test Explorer window. I also captured the information on fiddler.
There was a significant difference in the Header Content length. Also under the User-Agent property the protocol versions are different.
Not sure why VSTest ExecutionEngine is picking a different version.
The UnitTest in question is calling a webservice method which in turn calls a method from another referenced project.
Web Service class
using System;
using System.Web.Services;
using N4S.Forms.OperationHandlerBroker.Server;
using NLog;
namespace N4S.Forms.OperationHandlerBroker.WebServiceServer
/// <summary>
/// The operaton-handler broker service.
/// </summary>
[WebService(Description = "The N4S Forms Operation-Handler Broker Web-Service.", Name = "OperationHandlerBrokerWebService",
Namespace = "N4S.Forms.OperationHandlerBroker.WebServiceServer")]
[WebServiceBinding(ConformsTo = WsiProfiles.BasicProfile1_1)]
public class BrokerService : WebService
{ /// <summary>
/// Calls <see cref="HandleRequest"/>. Updates performance-counters.
/// </summary>
/// <param name="serializedInvokeRequestMessage">the binary-serialized <see cref="InvokeRequestMessage"/></param>
/// <returns>the binary-serialized response message</returns>
[WebMethod(BufferResponse = true, CacheDuration = 0, Description = "Invokes the requested operation-handler and returns a binary-serialized response-message.", EnableSession = false)]
public byte[] InvokeOperationHandler(byte[] serializedInvokeRequestMessage)
logger.Trace(Strings.TraceMethodEntered);
PerformanceMonitor.RecordRequestStarted();
InvokeRequestMessage requestMessage = (InvokeRequestMessage) AMessage.DeserializeMessage(serializedInvokeRequestMessage);
InvokeResponseMessage responseMessage;
try
responseMessage = HandleRequest(requestMessage);
PerformanceMonitor.RecordSuccessfulRequest();
catch (Exception)
PerformanceMonitor.RecordFailedRequest();
throw;
finally
PerformanceMonitor.RecordRequestEnded();
logger.Trace(Strings.TraceMethodExiting);
return AMessage.SerializeMessage(responseMessage);
UnitTest snippet
OperationHandlerBrokerWebService brokerService = new OperationHandlerBrokerWebService();
brokerService.UseDefaultCredentials = true;
byte[] serializedResponseMessage = brokerService.InvokeOperationHandler(serializedRequestMessage);
Please advise.
Thanks,
Deepak

SSIS package works in development environment but fails when job scheduler executes, file path invalid

SIS package works in development environment but fails when job scheduler executes, file path invalid
Relatively simple package to get OLE-DB connection to MS FoxPro 9.0 DB
The failure in the job log states that the path is invalid its a network path (\\192.168.1.xxx\foldername) this has been run several ways with the remote computer being mapped as a network drive and through the \\ notation described above.
Thinking it was a security issue between the SQL agent account and my account I tested by subsitution myself as a proxy account for the agent when running this job, again same result failed on network path.
One issue I see is that the remote computer is running Server 2000 (legacy software incompatable with newer versions)
Is it possible that this is a security issue, since if i understand correctly the current MS domain security model didn't exist until Server 2003.

Hi REIData,
Have you got the issue resolved? Based on your description, please make sure the target folder is shared properly. If the computer on which the SQL Server Agent job runs doesn’t join the domain as the server that hosts the shared folder, you have to share
the folder with everyone by adding “Everyone” to the people list on the File Sharing page of the folder and assign "Read/Write" permission to it.
Regards,
Mike Yin
TechNet Community Support

The servlet weblogic.servlet.AsyncInitServlet init method failed

I installed WLS 9.2.2 recently with my app being on 8.1.5 for a long time.
I chose to create a new domain instead of upgrading my existing one.
I use the eclipse 3.2.2 with the WL plugin.
When I start the server and login to the console not using eclipse it works fine.
Trying to start the server and login to the console gives a internal server error.
Any idea what could be wrong? I bolded the parts where I have looked into.
Here is the console output:
<Nov 19, 2008 3:13:02 PM CST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath:
C:\bea92\weblogic92\platform\lib\p13n\p13n-schemas.jar;C:\bea92\weblogic92\platform\lib\p13n\p13n_common.jar;*C:\bea92\weblogic92\platform\lib\p13n\p13n_system.jar*;C:\bea92\weblogic92\platform\lib\wlp\netuix_common.jar;C:\bea92\weblogic92\platform\lib\wlp\netuix_schemas.jar;C:\bea92\weblogic92\platform\lib\wlp\netuix_system.jar;C:\bea92\weblogic92\platform\lib\wlp\wsrp-common.jar>
<Nov 19, 2008 3:13:03 PM CST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 1.5.0_10-b03 from Sun Microsystems Inc.>
<Nov 19, 2008 3:13:05 PM CST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 9.2 MP2 Mon Jun 25 01:32:01 EDT 2007 952826 >
<Nov 19, 2008 3:13:10 PM CST> <Info> <WebLogicServer> <BEA-000215> <Loaded License : C:\bea92\license.bea>
<Nov 19, 2008 3:13:10 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 19, 2008 3:13:10 PM CST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
<Nov 19, 2008 3:13:11 PM CST> <Notice> <Log Management> <BEA-170019> <The server log file C:\bea92\user_projects\domains\domain\servers\AdminServer\logs\AdminServer.log is opened. All server side log events will be written to this file.>
<Nov 19, 2008 3:13:15 PM CST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
<Nov 19, 2008 3:13:22 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 19, 2008 3:13:22 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<Nov 19, 2008 3:13:30 PM CST> <Error> <HTTP> <BEA-101359> <The servlet weblogic.servlet.AsyncInitServlet init method failed while it was run in the background. The exception was: java.lang.NoClassDefFoundError: com/bea/p13n/management/ApplicationFilePoller$Handler.
java.lang.NoClassDefFoundError: com/bea/p13n/management/ApplicationFilePoller$Handler
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     Truncated. see log file for complete stacktrace
>
<Nov 19, 2008 3:13:37 PM CST> <Notice> <Log Management> <BEA-170027> <The server initialized the domain log broadcaster successfully. Log messages will now be broadcasted to the domain log.>
<Nov 19, 2008 3:13:37 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
<Nov 19, 2008 3:13:37 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING>
<Nov 19, 2008 3:13:39 PM CST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 127.0.0.1:7005 for protocols iiop, t3, ldap, http.>
<Nov 19, 2008 3:13:39 PM CST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "AdminServer" for domain "domain" running in Development Mode>
<Nov 19, 2008 3:13:40 PM CST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Nov 19, 2008 3:13:40 PM CST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Nov 19, 2008 3:22:04 PM CST> <Error> <HTTP> <BEA-101020> <[weblogic.servlet.internal.WebAppServletContext@d6c6a0 - appName: 'consoleapp', name: 'console', context-path: '/console'] Servlet failed with Exception
java.lang.NullPointerException
     at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:124)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     Truncated. see log file for complete stacktrace
Edited by: user5384782 on Nov 19, 2008 1:42 PM
Edited by: user5384782 on Nov 19, 2008 3:59 PM

Thanks for your replies adrian and david.
The only thing I see different is that eclipse has different arguments when calling the jvm at the top.
startWebLogic.cmd:
C:\bea92\JDK150~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000
-XX:PermSize=48m -XX:MaxPermSize=128m -Xverify:none -da -Dplatform.home=C:\b
ea92\WEBLOG~1 -Dwls.home=C:\bea92\WEBLOG~1\server -Dwli.home=C:\bea92\WEBLOG~1\i
ntegration -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testC
onsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\bea92\patch_weblogic922
\profiles\default\sysext_manifest_classpath -Dweblogic.Name=AdminServer -Djava.s
ecurity.policy=C:\bea92\WEBLOG~1\server\lib\weblogic.policy weblogic.Server
eclipse:
-hotspot -Xms32m -Xmx200m -Dweblogic.ProductionModeEnabled=
Eclipse may be calling the cmd I dont know.
I will try upgrading my eclipse like adrian said, but in the meantime I appreciate any further advice/tips.

Install OBIEE Failed When Creating Domain

Hi all,
I tried to install OBIEE on 64bit redhat linux, but failed when creating domain, the error log shows:
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3180)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3043)
     at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1645)
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:635)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An internal WLST operation has failed.
Action:
See logs for more details.
     at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
     at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3126)
     ... 19 more
oracle.as.provisioning.exception.ASProvisioningException
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
     at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
     at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:49)
     at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:70)
     at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:66)
     at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:113)
     at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:375)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:88)
     at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:105)
     at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
     at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:96)
     at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:186)
     at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
     at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:86)
     at java.lang.Thread.run(Thread.java:662)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
     at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:686)
     at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:391)
     at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
     ... 14 more
the following steps(steps after creating domain) raised:
Caused by: java.net.ConnectException: t3://hostname:7001: Destination unreachable; nested exception is:
    java.net.ConnectException: Connection refused; No available router to destination
It's unlikely a hosts file issue which I've met before.
Install OBIEE Failed on Linux 64bit
the log caused by hosts file shows:
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
BTW, the port was tested to be available.
any idea?
thanks in advance
Nathaniel

we had this issue couple of days back ,,
Resolved by doing below
1. uninstall obiee 2. drop the repository 3, remount /tmp folder
with this we could successfully install obiee 11.1.1.7

Weblogic.xml.dom.marshal.MarshalException: Failed to unmarshal UsernameToke

Hello,
I'm developing an web service client and I have an error when I call the web service :
*<env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">*
*<faultcode>wsse:InvalidSecurity</faultcode>*
*<faultstring>weblogic.xml.dom.marshal.MarshalException: Failed to unmarshal {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}UsernameToken</faultstring>*
*</env:Fault>*
The wsdl has the following policy set:
*<WL5G3N1:Policy WL5G3N2:Id="ws-policy">*
*<sp:SupportingTokens>*
*<wsp:Policy>*
*<sp:UsernameToken sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/AlwaysToRecipient">*
*<wsp:Policy>*
*<sp:HashPassword/>*
*<sp:WssUsernameToken10/>*
*</wsp:Policy>*
*</sp:UsernameToken>*
*</wsp:Policy>*
*</sp:SupportingTokens>*
*</WL5G3N1:Policy>*
*<wsp:UsingPolicy WL5G3N0:Required="true"/>*
And the SOAP header of my request is as follows :
*<S:Header>*
*<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">*
*<wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">*
*<wsse:Username>user</wsse:Username>*
*<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordDigest">pVK3p4MC0YJ/qGeb/lMGrrNQBwQ=</wsse:Password>*
*<wsse:Nonce>NjkwMjk2Mzgw</wsse:Nonce>*
*<wsse:Created>2012-02-22T14:59:10Z</wsse:Created>*
*</wsse:UsernameToken></wsse:Security>*
*</S:Header>*
Do you know what might be the cause of the error?
Thank you.
Edited by: 916856 on Feb 24, 2012 8:39 AM
Edited by: 916856 on Feb 24, 2012 8:40 AM

Hello,
I'm developing an web service client and I have an error when I call the web service :
*<env:Fault xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">*
*<faultcode>wsse:InvalidSecurity</faultcode>*
*<faultstring>weblogic.xml.dom.marshal.MarshalException: Failed to unmarshal {http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd}UsernameToken</faultstring>*
*</env:Fault>*
The wsdl has the following policy set:
*<WL5G3N1:Policy WL5G3N2:Id="ws-policy">*
*<sp:SupportingTokens>*
*<wsp:Policy>*
*<sp:UsernameToken sp:IncludeToken="http://docs.oasis-open.org/ws-sx/ws-securitypolicy/200702/IncludeToken/AlwaysToRecipient">*
*<wsp:Policy>*
*<sp:HashPassword/>*
*<sp:WssUsernameToken10/>*
*</wsp:Policy>*
*</sp:UsernameToken>*
*</wsp:Policy>*
*</sp:SupportingTokens>*
*</WL5G3N1:Policy>*
*<wsp:UsingPolicy WL5G3N0:Required="true"/>*
And the SOAP header of my request is as follows :
*<S:Header>*
*<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">*
*<wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">*
*<wsse:Username>user</wsse:Username>*
*<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordDigest">pVK3p4MC0YJ/qGeb/lMGrrNQBwQ=</wsse:Password>*
*<wsse:Nonce>NjkwMjk2Mzgw</wsse:Nonce>*
*<wsse:Created>2012-02-22T14:59:10Z</wsse:Created>*
*</wsse:UsernameToken></wsse:Security>*
*</S:Header>*
Do you know what might be the cause of the error?
Thank you.
Edited by: 916856 on Feb 24, 2012 8:39 AM
Edited by: 916856 on Feb 24, 2012 8:40 AM

Add WebLogic 8.1 as target fails when AdminServer listens on DNS

Similar Messages

Maybe you are looking for