Add word variation to already existing index entry

Dear Common Wisdom:
Hi!
I have an index and want to add a variation of a word already in the index and have InDesign use both words in the index listing, not as a sub listing.
For simplicity, say I was the singular and plural forms of the word to show up together under the same entry.
How do I do this?
Thanks!
cj

The index entry you insert in the dialog is the one that gets listed in the final index. If you have both "index" and "indices", and you add the entry for "indices", ID shows the Add Entry dialog with this word. Change it to "index", and ID will use that instead.
(In fact, putting the selected word or phrase into the dialog is just a convenience method. You can also change the text in there to "wow--ee", to have that appear in the index. The 'entry' has nothing to do with the 'real' text in your document -- which is kind of a pain if you make corrections and expect the index to follow automatically.)

Similar Messages

Add new product to already existing PPR ID through BAPI_PPR_MAINTAIN_40

Hi,
My requirement is to add new product to already existing PPR ID through the BAPI BAPI_PPR_MAINTAIN_40 but it is not working.
Normally at the time of creation we pass HANDLE and REF_HANDLE.
As in this case PPR ID already exist but adding new product, I am passing HANDLE and REF_GUID in place of REF_HANDLE.
INPUT_FIELDS also I am passing REF_GUID but it is not working.
Can anybody throw a light how this can be achieved to add new product through this BAPI?
It really helps.
Thanks in advance

Hi Joao,
Were you able to succeed in creating PPR programatically?
Please share your solution. Even I am unable to maintain input fields tab.

The key 0000 already exists; the entry was ignored

Hi All,
We are getting the following error messages, when we open up a web application for Integrated Planning.
We have a dropdown box for the Fiscal Year variable in our application.
'The key 0000 already exists; the entry was ignored'
'The key 2012 already exists; the entry was ignored'
The long text on the error does not give any other information than repeating the error message.
Any ideas?
Thanks in advance.
Best Regards,
- Shashi

Hi Raghu,
Thanks for the reply.
We have a web application designer and we have multiple queries in it and we are using the common variables accross them.
This is a very common scenario. Isn't it? What did you meant check for duplication?
Best Regards,
- Shashi

BAPI to Accept an already existing service entry sheet

Hi,
Please let me know a BAPI to accept an already existing entry sheet.
i.e set 'X' to the acceptance indicator for an existing entry sheet
Regards
Shiva

Hi,
Read the documentation in se37 and use apprapiate among all.
BAPI_ENTRYSHEET_CHECK Check Service Entry Sheet
BAPI_ENTRYSHEET_CREATE Create Entry Sheet
BAPI_ENTRYSHEET_DELETE Delete Entry Sheet
BAPI_ENTRYSHEET_GETDETAIL Display Detailed Data on Entry Sheet
BAPI_ENTRYSHEET_GETLIST List Entry Sheets
BAPI_ENTRYSHEET_GETRELINFO Detailed Release Information Relating to Entry Sheet
BAPI_ENTRYSHEET_RELEASE Release Entry Sheet
BAPI_ENTRYSHEET_RESET_RELEASE Cancel Release of Entry Sheets
<b>Reward points</b>
Regards

How to add to an an already existing textfile

I'm using PrintWriter with BufferedWriter to write to a file. But each time the I write to a file and close it, it deletes everything that was already in there and adds the new text i just had written. Is there a way not to delete the already existing text and just start adding text to the next line?

Use a constructor that has the append option. See FileWriter and FileOutputStream

Problems searching for not existing index entries

Hi,
we are creating a Java Fat Client Application with JDK 1.5.0_07 and compliance level 1.4. The GUI bases on the SWT libraries.
The application ships with JavaHelp 2.0_02 (jh.jar).
The helpset is dynamically merged.
JavaHelp has problems e.g. during search for index entries, which does not exist. The JavaHelp Window does not react anymore. The rest of the application still works fine.
Has someone encountered similar problems, found the reason and propably a solution?
Thanks, Joerg.

Hi Mikkel
1) number attributes are only exposed in the complete search sample (search.jsp), not the others (usearch.jsp, tsearch.jsp, gsearch.jsp)
2) Your understanding of the binary encoding is correct, except wk_queryexp package does not handle binary encoding. This is because that package
is meant for 9.0.1 API, which only supports string attributes.
In 9.0.2 and beyond, the encoding of number, date attributes is done in the query API layer in Java, using
the Equals, GreaterThan, LessThan, Between query operators. Please take a look at search.jsp
and see how they are used. The compile() method of the query operators will encode the values for you.
Keep in mind that you should code your application to use the query API, as the encoding algorithm
may change in the future.
David

How to add a node to already existing hierarchy in BW?

Hi Gurus,
Can someone please tell me step by step how to add a node to the hierarchy.
Thank you,
Olga

If I need to add an element to the node, I right click on the node and is it 'insert Characteristic'?
Sorry I must add one more thing.If it is the first time you add an element to the node then right click the folder(node).But if you already have elements in the node then right click any element and choose add element(country,material whatever).If you choose add a characteristic, then you add another type of element(e.g you have materials in the node and add some countries by choosing add a characteristic)
When I try to add a node, it gives me a list of nodes I can choose from
In fact when you right click a folder, there must be an option like "Create nodes".Do you right click on a folder, don't you?You create nodes like that.
Nevertheless, there is one more way to edit or create a hierarchy.You can load a hierarchy from a flat file.But I am not sure it is worth it.If you have lots of elements and nodes then I propose you to go that way.Step by step document:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/601b0771-92c4-2d10-a081-f947a516bd20?QuickLink=index&overridelayout=true

Missing index entries

I have been working on a massive index (about 20,000 entries) on a ID CS6 document, a 700 page biological work of reference where all taxon names should be indexed. Took me several weeks. I produced the InDesign file from a Word file, but entered the index entries in InDesign (there weren't any in the Word file).
Now I found that many of my entries seem to have gone missing. They do not appear in the generated index. On the page where I entered it, the normal code (a ':' above a '^') is changed in a single ':'. I fear the last code, ':', means something like 'invalid marker', because they also appeared in another (crashed) CS6 document where they represented corrupted MS Word cross references (see "Cross references from a Word file", a still unanswered question on this forum). Normally when you select an index marker, the entry is highlighted in the Index Window. When I select the ':', nothing happens.
In the beginning of the book, I just marked any singular taxon name, but as it appeared that some taxon names appeared quite often, I started using the 'Add all' button in the index entry window. (I hope I use the right English names, they appear in Dutch for me.) This meant that some taxon names on earlier pages got double markers, but I thought that was no problem because the same markers on the same page only result in one entry in the generated index file. Could this be the bug that's biting me? I haven't found the problem in the later pages of the book.
A lot of the entries still found their way to the generated index, but of course I find this very worrying. Because I still have to process many author corrrections, I will have to generate the index again.
So, I have the following urgent questions:
-     Why does this problem occur, under which circumstances? Will regenerating the index result in more loss of entries?
-     Can those ':' markers corrupt my file in any way? What are they? (With the "cross reference problem", after some time I was unable to open the file again, which would with this project give me a major problem.)
-     Can I somehow 'revive' the missing entries automatically? Or is there at least a way to search for the ':' markers? (They are hardly visible.)
-     How can I prevent this from happening in the future?

Forum participants are not Adobe employees. We're users like you who volunteer to share what we know.
Thanks for the added details.
Usually someone somewhere in the forum's global audience is awake and eager to participate at almost any hour. However, "super storm" Sandy in the USA has caused massive losses of power, transportation, and communication, so responses may be delayed for some time.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Fritschy wrote:
Thanks for your compliments, although they don't bring me any further.
The version is 8.0.1, I always update when I'm prompted to do so by the update centre. As far as I know it is an international version.
Still, I would guess the InDesign developers could tell me something about that ':' marker. I suppose the software didn't invent it itself.

Device ID already exists - ISE1.3 issue

Hi ,
Anyone can help guide me. How to solve this issue.
My authorization rules allow ONLY Registered Device to access. During the testing I deleted a client's MAC from Endpoint Identity Group List > RegisteredDevices. Then I try to register the device again through My Devices portal. Error show "Device ID already exists".
I try to find out from the document but it's not much help. The document is not clear. It said
Errors When Adding Devices to My Devices Portal
Employees cannot add a device, if another employee has previously added it such that the device already exists in the Cisco ISE endpoints database.
If employees attempt to add a device that already exists in the Cisco ISE database:
   •   And it supports native supplicant provisioning, we recommend adding the device through the BYOD portal. This will overwrite any registration details that were created when it was initially added to the network.
   •   If the device is a MAC Authentication Bypass (MAB) device, such as a printer, then you must resolve ownership of the device first. If appropriate, you can remove the device from the endpoints database using the Admin portal, so that the new owner can successfully add the device using the My Devices portal.
another source from cisco
When I try to add a device, I get an error that says that the device already exists, but I do not see it listed as one of my devices. How can I add this device?
That error means that someone has already added the device to the system. If it does not appear on your list, one of your coworkers has registered the device already.
You have several options for resolving this situation:
   •   If you are attempting to add a device such as a printer, you will need to contact your help desk to locate the current owner and to resolve this issue for you.
   •   Regardless of the device type, you can contact your help desk so that they can verify who registered the device previously and delete it from the database so you can re-register it.
Some source tell me to delete device from My Device portal that was registered. However, the device is not shown there.
Any suggestions are welcome. Thank you.
Nipat CCIE#29422

This happens normally when you register one host against the zlm server, stop zmd, delete the deviceid and secret file, start zmd and register it again against the zlm server without deleting the existing device in the zlm web interface.
What happens at this time is that the zlm client registers with the deviceid and the secret against the zlm server. In the web interface you see the hostname of it. If you open the details, you see the guid of the host which equals the deviceid.
When the zlm client communicates with the zlm server it uses the deviceid and the secret to login and query the bundles, catalogs and policies assigned to it.
So now when the zlm client is stopped, the files deleted, the zlm recreates them the next time it is started. After registering against the zlm server, it tries to login with the new deviceid and the new secret. There is already such a host entry, therefor it renames one and register with the new values again.
Do you have maybe a cron job or something that deletes those files and restarts the zlm client ?
Rainer

Java Add-In installation on a existing ABAP System (MSCS Cluster)

Hi all
we try to install a Java Add-In for a already existing ABAP System with
SAPinst. The ABAP System is a NetWeaver2004s SR1 System in a MSCS Cluster.
We have the Problem that we can´t choose the Installation Drive during
the SAPInst Define Parameter Step during the "Central Services Instance (SCS) Java Add-In" Installation.
But in the Installation Manual for
NW2004s Java AS in Chapter 4.3.2 is stated:
"Caution: You must install it on the same shared disk as the ASCS instance."
If I run the Installation, the SCS will be installed on the local disk E:
beside the Central Instance. But it need to be on the shared Disk P:
beside the ASCS installation. How can I control this?
Stefan

obviously the network share saploc is existing in your system an pointing to a local device.
Delete the local saploc share, install SCS instance, run MSCS first node, additional node, create the local share saploc again (don't forget to set permissions on the share, the default permission did only allow Read vor Everyone) and proceed with installation.
There is a note in creation for this issue.
peter

Recruitment-Applicant Actions- Applicant 00000001 already exists

Dear Gurus
hope u'll b doin well.
I am facing a problem while processing applicant data. My Hiring action from PB40 --> Initial data entry is working well.
Now I want to insert additional data for applicant. I have configured "additional data entry actions as follow
Recruitment>app selection>applicant actions
Info group
97                 01     MOD     4001            Applications
97                 02     INS     0022            Education
97                 03     INS     0023            Other/Previous Employers
97                 04     INS     0024            Qualifications
97                 05     INS     4002            Vacancy Assignment
97                 06     INS     4005            Applicant's Personnel Number
I also tried first line on above infogroup in following ways aswell
97 01 COP 4001 Applications
97 01 COP 4000 Applications
I opened transaction PB40.
Insert applicant number. enter date. select this action from list. and execute.
System is giving me following msg.
Applicant 00000001 already exists (initial entry action not allowed)
Message no. PA128
================
Kindly guide me how to resolve this issue.
regards,
Edited by: Ragunath on May 27, 2011 3:25 PM

Hi
For additional data action also you have configured it as initial hiring ... so it is throwing the error
R K

This entry already exist when adding an alert

Hi,
I still have this error every time I send an alert to a group of recipient.
It seems that for some reason, some users receiving messages that aren't loging in for some times I have this error poping up when sending alerts :
"This entry already exists in the following table (ODBC - 2035)"
What do I have to know about sending alerts ?
Here's the code used to send alert.
SAPbobsCOM.CompanyService oCmpSrv = null;
MessagesService oMessageService = null;
SAPbobsCOM.Message oMessage = null;
MessageDataColumns pMessageDataColumns = null;
MessageDataColumn pMessageDataColumn = null;
MessageDataLines oLines = null;
MessageDataLine oLine = null;
RecipientCollection oRecipientCollection = null;
try
    oCmpSrv = oCompany.GetCompanyService();
    oMessageService = ((SAPbobsCOM.MessagesService)(oCmpSrv.GetBusinessService(ServiceTypes.MessagesService)));
    oMessage = ((SAPbobsCOM.Message)(oMessageService.GetDataInterface(MessagesServiceDataInterfaces.msdiMessage)));
    oMessage.Subject = Subject;
    oMessage.Text = Body;
    oRecipientCollection = oMessage.RecipientCollection;
    foreach (string RecipientName in Recipients)
        oRecipientCollection.Add();
        oRecipientCollection.Item(oRecipientCollection.Count - 1).SendInternal = BoYesNoEnum.tYES;
        oRecipientCollection.Item(oRecipientCollection.Count - 1).UserCode = GetUserCode(RecipientName, oCompany);
    // Don't add a document link if we pass -1 as parameter.
    if (ObjectType != -1)
        // get columns data
        pMessageDataColumns = oMessage.MessageDataColumns;
        // get column
        pMessageDataColumn = pMessageDataColumns.Add();
        // set column name
        pMessageDataColumn.ColumnName = ColumnName;
        // set link to a real object in the application
        pMessageDataColumn.Link = (ObjectType != -1 ? BoYesNoEnum.tYES : BoYesNoEnum.tNO);
        // get lines
        oLines = pMessageDataColumn.MessageDataLines;
        // add new line
        oLine = oLines.Add();
        // set the line value
        oLine.Value = ObjectKey;
        // set the link to BusinessPartner (the object type for Bp is 2)
        oLine.Object = ObjectType.ToString();
        // set the Bp code
        oLine.ObjectKey = ObjectKey;
    // send the message
    oMessageService.SendMessage(oMessage);
    return "";
catch (Exception ex)
    return ex.Message;
if I send message only to the current user there's no problem. but since the recipient list have 3 users, the 2 other users are rarely opening SAP
It can be the way I'm filling the recipients but I'm not sure.

Hi,
It's in C# but enjoy this :
/// <summary>
                /// Send an alert to a recipient
                /// </summary>
                /// <param name="RecipientName">The name of the recipient</param>
                /// <param name="Subject">The subject of the message</param>
                /// <param name="Body">The message</param>
                /// <param name="ColumnName">The name of the column shown on for the document sent</param>
                /// <param name="ObjectType">The object type : for instence (int)BoObjectTypes.oOrders</param>
                /// <param name="ObjectKey">The DocEntry of the document to be linked to this alert</param>
                private static string _SendAlert(string Subject, string Body, string ColumnName, int ObjectType, string ObjectKey, SAPbobsCOM.Company oCompany, System.Collections.Generic.List<string> Recipients)
                    SAPbobsCOM.CompanyService oCmpSrv = null;
                    MessagesService oMessageService = null;
                    SAPbobsCOM.Message oMessage = null;
                    MessageDataColumns pMessageDataColumns = null;
                    MessageDataColumn pMessageDataColumn = null;
                    MessageDataLines oLines = null;
                    MessageDataLine oLine = null;
                    RecipientCollection oRecipientCollection = null;
                    Recipient oRecipient = null;
                    try
                        oCmpSrv = oCompany.GetCompanyService();
                        oMessageService = ((SAPbobsCOM.MessagesService)(oCmpSrv.GetBusinessService(ServiceTypes.MessagesService)));
                        oMessage = ((SAPbobsCOM.Message)(oMessageService.GetDataInterface(MessagesServiceDataInterfaces.msdiMessage)));
                        oMessage.Subject = Subject;
                        oMessage.Text = Body;
                        oRecipientCollection = oMessage.RecipientCollection;
                        foreach (string UserCode in Recipients)
                            oRecipient = oRecipientCollection.Add();
                            oRecipient.SendInternal = BoYesNoEnum.tYES;
                            oRecipient.UserCode = UserCode;
                        // Don't add a document link if we pass -1 as parameter.
                        if (ObjectType != -1)
                            // get columns data
                            pMessageDataColumns = oMessage.MessageDataColumns;
                            // get column
                            pMessageDataColumn = pMessageDataColumns.Add();
                            // set column name
                            pMessageDataColumn.ColumnName = ColumnName;
                            // set link to a real object in the application
                            pMessageDataColumn.Link = (ObjectType != -1 ? BoYesNoEnum.tYES : BoYesNoEnum.tNO);
                            // get lines
                            oLines = pMessageDataColumn.MessageDataLines;
                            // add new line
                            oLine = oLines.Add();
                            // set the line value
                            oLine.Value = ObjectKey;
                            // set the link to BusinessPartner (the object type for Bp is 2)
                            oLine.Object = ObjectType.ToString();
                            // set the Bp code
                            oLine.ObjectKey = ObjectKey;
                        // send the message
                        oMessageService.SendMessage(oMessage);
                        return "";
                    catch (Exception ex)
                        return ex.Message;
And make sure tou send only ONE recipient in the collection like {Recepient ONE} because sending more then one wasn't working for me and I never knew why !
WHY WHEN EDITING THIS MESSAGE EVERYTHING IS FINE BUT WHEN LOOKING AT IT ALL THE SPACES ARE GONE ?
Edited by: Marc Roussel on Aug 26, 2009 12:19 PM

This Entry Already Exists in the Table (UDO1)

Hello All,
I have created a Document Type Form with one Document and one Document Rows Table .
Their is no Manage Series option checked in the Registration as it is without any series.
Now the entries were going smoothly untill the record no. 116 then after that the user tries to add the document no. 117
system is showing an error message " This Entry Already Exists in the Table ( UDO1) " and the data is not getting added.
I have checked the Header & Line Tables both tables conatins data upto 116 record.
But still is not getting saved.
Their is no Series feature in this form (No Manage Series ) the numbering the going as per SAP .
Please suggest how to solve this problem without hampering the already entered data.
Thanks & Regards,
Amit

Hello Amit,
Sometimes the restore document numbering function from help makes miracles....
By the Way, please check your UDO tables and look for keys, docentries, etc,
Regards
János

"This entry already exists in the following tables DLN1"

Hi there,
We create a Delivery from Sales Order using the Copy To option with a batch managed item. When we try to add the document, the error message appears:
This entry already exists in the following tables '' (DLN1) (ODBC -2035)
I think it is something to do with the chosen batches but I'm not sure about it. Did someone already have the same issue before?
Thanks and regards,
Nat

Hi,
I would suggest to escalate this issue to SAP support.
Our client has experienced similar issue but they want to update item master data. They duplicated existing one and then delete last 3 digits of the original item code and then update it, the error message appears but it refers to AIT1 table and ODBC 2035.
There is a note relate to it but it is just a query and the result must be sent to SAP support.
However, have you tried to use copy from ? I mean you open the DO, put the customer code and then copy from the SO ? Will the error appear ?
Rgds,

This entry already exists in the following tables (ODBC -2035)

Dear All,
          I'm trying to add the AR Invoice from the excel file. I got error "This entry already exists in the following tables (ODBC -2035)". I have of course checked that the record does not already exist. I try again to add the AR Invoice, at this time, i can add successfully. Some times this works fine. I'm using the SAP 2007B PL13.
          Please help me to solve. Give me the suggeston.
Thanks and regards,
Lei Nandar Myint

Dear,
       I try to add the AR Invoice using DI API.
Thanks and regards,
Lei Nandar Myint

Add word variation to already existing index entry

Similar Messages

Maybe you are looking for