Added Credits No Longer Show...

Whenever I want to add a credits scene, it tells me that it has been added, but when I try to playback my movie, it just skips over the credits scene. Does anyone know what's going on and how to fix it?

Hi,
It's difficult to say - it could be a stylesheet issue. If you clear your browser's cache and Ctrl-F5 your page, perhaps?
Have a look for "InvalidProcedure.jpg" in here: [http://apex.oracle.com/pls/otn/f?p=267:41] - click on the image to make it full size. I've intentially made my GETPAGE procedure invalid by adding a "Blah" line - clicked compile and refreshed the Procedures list. The red bar definitely appears. This is on my OTN workspace - the Apex version is shown bottom-right.
Andy
Edited by: ATD on 14-Aug-2009 17:00

Similar Messages

The songs I've added to my itunes library from cd's are no longer showing up in my itunes list. how do I put them back on from my ipod?

the songs I've added to my itunes library are no longer showing on my itunes account. how do I load them back on from my ipod

What do you mean by " on my itunes account"
and "in my itunes list"?

My iTunes account is no longer showing my playlists or any of the music I have added from sources other than iTunes.

I discovered that iTunes is no longer showing any of my playlists or music I have added from sources other than iTunes. My iPod, which is a 4th Gen Classic, seems fine and has all of my playlists and music. My question is how do I upload my iPod to iTunes so that I don't lose anything? I have read a lot of posts about people having similar problems and most of them suggest restoring from an old saved file. I have two problems with this approach 1) I do not have a current back-up and 2) it does not seem to work for any of my non-Apple purcahsed music. Does anyone know of an easy way to fix this?

I'd do a "deauthorize all" from a computer you have access to, and then reauthorise the computers you still have access to.
For instructions, see the following document:
iTunes Store: About authorization and deauthorization

My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

My ipod nano 7th gen no longer shows "Playlists" in the music menu. No changes made other than deleting one and adding one playlist to those synced. Synced fine in late February. Not working as of 3/7/2014.

I would either say that the iOS is correpted due to a software glitch or y have have a hardware problem like bad memory locations that are corrupting the iOS.
- Restore from backup via iTunes. This will install a fresh copy of the iOS. See:
iOS: How to back up
- Restore to factory settings/new iOS device.   This will elimate corruptin in the backup causing the problem.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

IMovie '11 will no longer show project or open the project file

Upon finishing a project, I was ready to do a Share > Export Movie command, and opted first to do a restart on my computer (by first doing a File > Quit in iMovie).
Now my project no longer shows up in the projects pane!
While the import of the original footage still exists in the Event Library pane, the project is nowhere to be found in the Projects Library pane.
In addition, while the project file that sits in my iMovie Projects folder is there, it will not open!
When I option click it to open with iMovie, iMovie launches normally (displaying no messages) but does not show the project in the projects pane!
What has happened here? The iMovie Projects folder is on my internal hard drive and I have not ever moved any files around. Is there any way to get it back?
I have tried to open my project file on a different computer that is networked in the same room, but the same happens: iMovie launches normally, however the project does not appear in the the Projects Library pane.
As a test, I have created a couple new projects that I have named "Test1" and "Test2" and they indeed show up normally every time I launch iMovie or do an "open with iMovie" command from the iMovie Projects folder. But my origional project just doesn't work. Please help!
If this is of any help: my origional project comprises of a 26 minute MOV file that I have simply imported in iMovie and have added subtitles (no transitions). I had been working for two days on it, and there were 2 times early on when I had to force quit iMovie because I was getting the spinning ball - I was worried about whether the changes were saved, but each time they were indeed saved and I could access the project normally. (I had considered this was caused by a shortage of memory, so I did not think anything of it.) Since then and up to the moment of the problem, I had occasionally shut down or restarted my computer (by first doing a File > Quit in iMovie) with no problems up to now.
Looking through the forum, I have tried 1) logging in/out, 2) logging in as a visitor, 3) creating a new admin account, in addition to 4) subtracting the iMovie preferences file from the Library, but nothing has worked.
Any help would be greatly appreciated!
I'm running Mac OSX 10.7.5 and iMovie '11 version 9.0.8 on an iMac 27 inch, 2.8 GHz i7 with 4 GB ram.

Are you running Time Machine?

Folders created in bookmarks no longer show up when I right a webpage to save.

folders that where made with right click crate new folder no longer show in that particular menu. they appear under book marks at the top of the page but no longer appear when I right click a web page and wish to save to a folder specifically created for this type of subject, they are no appearing there anymore. I havent added and toolbars or extensions the folders are just not there. I am using win7 home premium and ff 3.6.17

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode

My movies, audio, purchases, etc no longer shows up on my iTunes! HELP!

i clicked to open my iTunes when all of the sudden not only did the itunes open but it started to "IMPORT" itunes rather than open to its window! i click "stop" downloading in the middle. when i reopened my iTunes icon i the only ones i see is my:
- music
- under PLAYLIST the only one showing is SHUFFLE everything else like purchased songs, and my folders are gone!
- movies: i downloaded are no longer showing up on my movies folder.
- audiobooks: the same thing i see!
i'm afraid to connect my iPod to my laptop in fear i will lose my movies, audiotbooks , purchased and added songs, recently added songs and the like!
what should i do? what happened? is my itunes libary corrupted?
please help. thank you.

i also want to add that i downloaded itunes 7 hoping i can restore the folders i lost. unfortunately it didnt work.
is my itunes corrupt?
is there a software like copytrans i can download that can save songs, movies and audiobooks?
thanks in advance.

Why is Messages no longer showing up under my iCloud account in the "Internet Accounts" window?

Why is Messages no longer showing up under my iCloud account in the "Internet Accounts" window? I recently deleted it and added it back, but then Messages went away. On my iPhone, it shows me logged in under my iCloud account and my cell phone number is synced with that iCloud account. Yet, on my Mac it isn't showing up.
I've already tried removing and adding the iCloud back several times.

The Messages app is supposed to grab the information from the "Internet Accounts." Messages has always included the ability to separately add Google, Yahoo, AOL, or other messages accounts; but, it has always grabbed the iCloud account information from the "Internet Accounts" section. Except for now, when the Messages option has disappeared from the iCloud account under "Internet Accounts."

ARD no longer shows "control computer", only "screen sharing avail"??

I have been running ARD for well over a year on my iMac to manage several servers that are located far away from me.
I normally use the "copy" feature to push new zip files of our Web site to the server when it is updated. When logging into ARD today, I noticed all the servers are no longer showing "Control". Instead they all have "Screen Sharing Available" listed in the current status column. When I go to copy my files from my local machine to the servers, I get an error: "This Task Will Fail - The remote desktop software is not active on www.servername.com".
However if I select a server and then click the control button, I can still connect to the server fully and work with it?
This has never happened before and I am at a loss as to the issue. I have had some changes to my local setup recently that may be the cause of the problem.
1) Linksys router died, replaced it with a Apple Airport Extreme.
2) Keychain got corrupted. Deleted the login.keychain file to rebuild a new one.
I have restarted my iMac several times, and even restarted the servers to see if this would clear up the problem. No luck.
If I try and drag-copy my zip files to the servers from my local machine after connecting via ARD, the window that asks if I want to send the file ignores my click on the "send" button and does nothing? Before this problem occurred I could easily drag-copy items.
Does anyone know what could be causing this to occur or how I can reset/fix my ARD clients and servers?

Okay I have figured out part of the problem and fixed it, although one issue still persists.
I fixed the "Current Status" issue for my servers by adding port 5900 & 3283 to the port forwarding settings in my Airport Extreme via the Airport Utility application. I don't remember having port forwarding turned on for my (now dead) Linksys router, but I could be mistaken.
Now I have a different problem. When I go to "copy" a file from my local machine to a remote server, I get a message that says "This task will fail: A console user is not logged in on www/servername/com"
If I log into that computer first, I am able to copy items, but I remember being able to copy items to my remote servers before without having to first sign into them? Am I mistaken on this or have I uncovered another problem?
Any help appreciated.

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

CLUSTER: Remote Apps no longer showing in WebAccess

Hello
We are having a problem with our Remote Apps are no longer showing in WebAccess. I can't recall making a change to have caused this however I see this error in Event Log:
Error in the WMI interface to tsfarm.contoso.local. Check that the machine is running and connected to the network. If the problem persists, reboot the machine.
Error Code: 0x80004005
Log Name: Microsoft-Windows-RemoteApp and Desktop Connection Management/Admin
Source: Microsoft-Windows-RemoteApp and Desktop Connection Management
Date: 11/08/2014 13:00:50
Event ID: 1000
Task Category: None
Level: Error
Keywords: WMI
User: NETWORK SERVICE
Computer: FP001.contoso.local
Description:
Error in the WMI interface to tsfarm.contoso.local. Check that the machine is running and connected to the network. If the problem persists, reboot the machine.
Error Code: 0x80004005
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-RemoteApp and Desktop Connection Management" Guid="{77B0D57B-97B8-4F42-83B0-4FDA12D3D79A}" />
<EventID>1000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000100</Keywords>
<TimeCreated SystemTime="2014-08-11T11:00:50.216025000Z" />
<EventRecordID>269</EventRecordID>
<Correlation />
<Execution ProcessID="4016" ThreadID="2360" />
<Channel>Microsoft-Windows-RemoteApp and Desktop Connection Management/Admin</Channel>
<Computer>FP001.contoso.local</Computer>
<Security UserID="S-1-5-20" />
</System>
<UserData>
<EventXML xmlns:auto-ns3="http://schemas.microsoft.com/win/2004/08/events" xmlns="Event_NS">
<ErrorCode>2147500037</ErrorCode>
<String1>tsfarm.contoso.local</String1>
</EventXML>
</UserData>
</Event>
The situation is as following. All servers are Windows 2008 R2 Enterprise.
We have clustered 2 virtual servers FP001 and FP002, for now FP001 is running all services:
Connection Broker, MSDTC, Fileserver, Printserver, SQL Server.
For the Remote Apps: Apps were made on TS001 and TS002, both these servers are added to a tsfarm on the Connection Broker. A virtual IP was made on the firewall linked to a failover between the two Terminal Servers. This IP was linked to DNS name: tsfarm.contoso.local.
I have checked WMI en COM+ security settings but they all seem fine, nothing changed. I have restarted both Terminal Servers but no effect. Restarting FP001 and FP002 had no effect either.
Any assistance is welcome!

I finally got it to work by going to the WebAccess website, then configuration and changing the source from Connection Broker cb001.contoso.local to Remote App Source tsfarm.contoso.local.
However this is not how it should be done I suppose.. Any idea why linking the farm works but linking the connection broker were the farm has been set as source does not?

The Calendar tab no longer shows in users and groups screen

To add a user to a node, I used to be able to click on the Calendar tab after
adding a new user to the Directory. After upgrading to Calendar 3.5, it no
longer shows up!
<P>
In the file suitespot_server_root/admin-serv/config/dsgw.conf make sure that the
following line is added at the end:
include suitespot_server_root/admin-serv/config/dsgw-calendar.conf
<P>
You will have to stop/start your admin server after making any changes.

Have you tried opening Calendar to see if it updates?

XP no longer shows up as a startup disk

After upgrading to leopard today, my XP partition no longer shows up as a startup disk.
I had/have my windows partition on it's own drive that was NOT created with bootcamp. I pulled my osx disk from the my mac pro and installed windows on the disk i had in bay 2 using 100% of the disk (ntfs). after installing the bootcamp windows drivers, i reinserted the osx disk and all has been well for the last 4 months,... until the upgrade today that is.
Now, when i go to the 'Startup Disk' preference Windows is no longer an option. the disk still shows up in Finder and I can navigate around the file system.
Anyone have any ideas on how I can get it to show up again? I'd really rather not have to reinstall if i can avoid it.
thx.

I have exactly the same problem (well, maybe).
I have installed MacFUSE and ntfs-3g. I don't know if this is of any relevance, because I don't know if it was working directly before I installed them.
I have my OS X and NTFS volumes on the same physical disk. I also had to install Windows twice because I buggered it up the first time (formatted the partition as FAT32 and ran into a bunch of disk errors).
I also notice that in WinClone I have 2 Untitled Volumes at /dev/disk0s3 and /dev/disk1s1. /dev/disk0s3 seems to be the legit Windows NTFS partition, but I have no idea what /dev/disk1s1 is about. I don't know if it's been there all along or not but perhaps it is confusing matters and stopping the legit Windows volume/installation from being detected...? Should that second volume exist at all? It doesn't exist according to the Disk util.
edit: I used fdisk just to have a look at the two untitled partitions.
Jacbook:dev jacteh$ sudo fdisk /dev/disk0s3
Disk: /dev/disk0s3 geometry: 10651/255/63 [171117408 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 72 368 111 45 - 371 101 51 [ 218129509 - 1701990410] <Unknown ID>
2: 74 67 115 32 - 299 114 44 [ 729050177 - 543974724] <Unknown ID>
3: 65 114 111 32 - 353 115 52 [ 168653938 - 0] Netware 3.xx
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
Jacbook:dev jacteh$ sudo fdisk /dev/disk1s1
Disk: /dev/disk1s1 geometry: 0/4/63 [63 sectors]
Signature: 0x0
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
I can hold the option key upon startup and manually enter Windows like that, but I'd prefer to be able to restart and boot Windows without having to hold a key.
Apart from not seeing the Windows boot volume in the system prefs pane, Boot Camp (and the rest of Leopard) has been excellent. I am impressed at the level of apple hardware support for windows. It seems to be much better than most native PC hardware.
I am dying for an answer. It's a fairly minor problem in the grand scheme of things, but **** it's frustrating.
Message was edited by: jacteh

Windows Partition No Longer Shows Up After Accidental Premature Closing of Camptune

Mac OS X 10.7.5
I was running Paragon Camptune to expand my Windows 7 partition. The progress bar reached the end and stayed there for about 30 minutes. The Camptune window was then accidentally closed and Camptune quit itself. I restarted the computer but the Windows partition no longer shows up when I try to boot it, only Mac OSX and Recovery Disk. The Bootcamp drive is no longer accessable from System Preferences, and the Bootcamp partition folder is no longer accessable in the Devices area of Finder. Camptune no loner recognizes that there was a partition. Thus, I am no longer able to access the partition's contents or delete it and make a new one.
It would be preferable if I could fix the partition and have it accessable again, however I have no problem with deleting it and making a new partition. Any advice? Thanks for your time.
Here is the information from the Partition Inspector:
*** Report for internal hard disk ***
Current GPT partition table:
#      Start LBA      End LBA Type
1             40       409639 EFI System (FAT)
2         409640   1151635239 Mac OS X HFS+
3     1151635456   1152904991 Mac OS X Boot
Current MBR partition table:
# A    Start LBA      End LBA Type
1              1       409639 ee EFI Protective
2         409640   1151635239 af Mac OS X HFS+
3     1151635456   1152904991 ab Mac OS X Boot
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 1151635456:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X Boot

Hi Eric,
Bootcamp does show up in the disk utility but it is grey instead of black like the Macintosh HD.
The following information is available:
Mount Point: Not mounted
Format: Windows NT File System (NTFS)
Owners Enabled: -
Number of Folders: -
Capacity: 274.55 GB
Available: -
Used: -
Number of Files: -
What might be the best way to continue to repair it. I do not have the option to click on "verify disk permissions" or "Repair Disk Permissions".
Should I clone the hard drive in the target disk mode??
I'm not the best at this stuff so any more advice would be greatly appreciated!
Thanks!

IPod Touch no longer showing up under My Computer

My iPod Touch is no longer showing in the device list under My Computer and as such can't access it to get my photos off it.
It works in iTunes just fine, syncs fine, etc.
If I go to Devices and Printers, it used to be listed under the Devices category as iPod, but now shows under the Unspecified category as Apple Mobile Device USB Driver, so basically a generic device.
I have no devices with exclamation points or any other trouble signs under Device Manager.
Help?

Well, I am not entirely sure what exactly happened but after trying numerous times to reinstall the drivers and getting all sorts of error messages, I finally got Windows 7 to cooperate. The iPod Touch now shows up and is being detected as a digital camera under Devices, and under Computer it is showing up under Portable Devices. If I double-click on it I can view my pictures, transfer them, delete them, etc.

Added Credits No Longer Show...

Similar Messages

Maybe you are looking for