Adding 2nd hard drive(IDE 40gig)  to B&W G3 w/ 9gig SCSI drive

Recently got a 450 B&W G3 with a 9gig SCSI ultra something drive in it already and i would like to add a 40gig IDE drive as a second. the scsi drive is hooked through a scsi card and is the main drive. i want to just add the second drive for more storage. when i plug up the drive and start up, it does not see the drive. I know i'm missing something little to get this to work, but I don't know alot of the techincal terms and meanings to ask the right questions. any help or if someone can direct me to an older article that might help would be great!!! Thanks!!

Hi, Papa -
Welcome to Apple's Discussions.
Make sure the drive is jumpered correctly. There is a block of exposed pins at the same end of the drive where the power cable and data cable are attached. On those exposed pins will be one or more little plastic-looking things bridging pin pairs - these are the jumpers.
There should be a label affixed to the drive in the vicinity of the jumper pin block; this label depicts the various configurations of where jumpers should be placed for various settings.
For your model Mac, you should use the jumper setting for "Master". Exception - if the drive is a Western Digital brand, it may have a setting named "Single" - if so, you should use that when the drive is the only device on the bus.
If you have not yet initialized (formatted) the drive, do so. Most drives are not usable until they have been prepared for a Mac by initializing the drive; initializing a drive places Mac drivers on it, and structures the platter for use by the OS.
You can use OSX's Disk Utility to initialize the drive. There should be sufficient info in OSX's Help section to use Disk Utility to do that. Some items of note -
• If you want that drive to be accessible when the machine is booted to OS 9 at some time, be sure to select the option to install OS 9 drivers.
• Select "Mac OS Extended" as the format for the drive.

Similar Messages

  • Added 2nd Hard Drive - Which Format Do I Select?

    I just added a 2nd hard drive. It shows up in disk utility. I know I must format it before I can use it. But, there are 6 choices in the Volume format drop down: Mac OS Extended (Journaled), Mac OS Extended , Mac OS Extended case - sensitive journaled, Mac OS Extended case - sensitive, MS-DOS file system, UNIX File System. Is there some information on the Apple site that explains these 6 formats?
    G5 2.3 dual   Mac OS X (10.4.6)   Which is best to use?
    G5 2.3 dual   Mac OS X (10.4.6)  
    G5 2.3 dual   Mac OS X (10.4.6)  

    Actually, when I have had a drive with problems like bad blocks, I find Intech Speedtool ZoneBench to show up problems the best. It also includes ability with another part of the suite to map out bad blocks (never found any) but I did have to do a 7-way erase with one drive that kept having problems.
    An entire 4GB area went from normal 56MB/sec down to 31-33MB/sec - either partition off that area, or just realize it has this problem with longer seeks (the time to go from inline to spare sector - some SCSI drives locate spares on the same track to reduce seeks.
    ZoneBench can be set to a 511MB test file, and can test 60? areas per volume, so you can force read/write to over 33%.
    The most important areas of a drive that cannot have any bad blocks are the areas that are not part of user allocated space, partition tables, directory (maybe) and the area of the journal file.
    If it solved a problem 1% of the time or less, would vendors include it in their "how to setup a drive for end users"?

  • Need help adding 2nd hard drive

     Hey guys whats up. I need some advice about adding a second hard drive. Right now i have a WD 320GB 7200 RPM IDE Ultra ATA100 Hard Drive running on the primary IDE. Everything is fine but i wanted to get a smaller and faster drive for the operating system and for some small video editing. I recently purchaced a Western Digital Raptor 36.7GB 10,000 RPM Serial ATA150 Hard Drive.
    Now the questions:
     1. How should i assing the drives? (which master/slave/cable select)
     2. Also am i going to have to do anything since im going to have one on the IDE and another on SATA?
     3. Any advice that you have...
     What i was thinking is this...i should disconect my current HD and hook up the new one to SATA port 2, and set it to master(or CS maybe). Format it and then install the operating system. Once OS installed and working, ill hook back up the IDE drive and make the setting to slave(or CS maybe). Then uninstall the operating system from the IDE.
    Thanks for any input

    Thanks NovJoe,
     What setting (master/slave/cable select) should i set the IDE drive to? And yes i do want my OS on the raptor.
    Thanks for your advice...didnt think that anyone was going to.

  • Adding 2nd hard drive

    I have a Power Mac G5 dual 2ghz with 1-160 gb hard drive.
    Want to hook up a second drive.
    What are the positives and negatives to adding an
    external drive or an internal drive?
    Any suggestions would be greatly appreciated.

    I agree with Ben. If you just need more storage, internal is the way to go -- faster access, more convenient.
    If you're using the new drive as a backup, external is better because whatever fries your computer (necessitating a restore from backup) would most likely damage internal drives far faster than an external backup which you can unplug and disconnect between backups.
    So, what are you planning to use it for?
    Hope we helped. If we did, please award points!
    -K

  • [Solved] Strange free space after adding 2nd hard drive

    Hello,
    Im pretty new to linux but am learning pretty fast, fast enough that I needed to install a second hard drive.
    Every thing went well, got the new drive in and mounted to /home and moved all my old /home to the new drive. After all that I went to delete the old /home on hda resize the / partition to use the rest of the drive.
    I used gParted 0.5.0 and booted from their live CD and did the deed. BUT now drive hda (40GB drive) shows that / is taking 36.92GB, when it was originally using about 4GB on the original 7GB / partition.
    I ran the disk usage tool and..well
    1) It shoes that I'm using 4GB of 40GB
    2) Only shows that I have 44GB available when I have 2 40GB Drives installed.
    can someone tell me whats going on here?
    to recap
    Originally the 1 drive was laid out as
    /boot - 100MB
    swap - 260MB
    /       - ~7GB
    /home - remainder of drive
    then I (wanted to) changed it to
    [sda]
    /boot - 100MB
    SWAP - 260MB
    /        - Remainder of drive
    [sdb]
    /home - 40GB
    Thank you for any help.
    I have attached the screen shots
    Last edited by =OTS=G-Man (2009-12-10 06:02:03)

    ill try the fsck right now
    heres the output you requested
    Filesystem Size Used Avail Use% Mounted on
    /dev/sda3 7.3G 3.9G 3.0G 57% /
    none 505M 120K 505M 1% /dev
    none 505M 0 505M 0% /dev/shm
    /dev/sda1 99M 12M 83M 12% /boot
    /dev/sdb1 38G 93M 38G 1% /home
    total 46G 4.0G 42G 9%
    thats interesting.
    /dev/sda3 is showing its old values almost like something in the partition tables didn't get updated?
    Last edited by =OTS=G-Man (2009-12-09 06:19:55)

  • Problems Adding 2nd Hard Drive

    Bought a new Western Digital WD10EARS 1 TB hard drive to add into drive bay "B" in my G5. I have two problems:
    1) Unfortunately the drive has no mounting "buttons" (screw-mounted hemispherical plastic buttons) that screw into the sides of the drive. These are needed to retain the drive in the molded plastic drive holder in the Mac. I need to source four of these buttons before I can install the drive.
    2) Also unfortunately, the new drive does not have a 4-pin Molex-type power input connector like the one on my OEM WD2500 hard drive in drive bay "A." In fact I see no power connector at all. There are two small connectors on the left side of the rear panel of both drives that look identical, and Apple has supplied extra matching connectors which will work with the new drive, and there is also a spare power plug of the Molex type in the Apple wire harness, but since there is no corresponding connector on the new drive, I am out of luck there. Unless, somehow, power would be fed to the new drive on one of the left side connectors that do match...
    Would appreciate any useful advice, thanks!
    ---- Bill Strohm

    Thanks to both BDAqua and Old Comm for your responses. I will check for those 4 spare "overmold" mounting buttons after sending this reply. They should be there; never touched them previously. That will take care of problem #1.
    Now for problem #2:
    "Yes, SATA Power is not shaped like Molex. They are likely there already, both SATA Power & SATA Data, just hidden beside/behind the other drive or mountings. There are Molex->SATA power adapters though."
    Not sure what this means. As I wrote above, Apple has provided a spare Molex power connector on the same wire harness as used by the OEM drive, but there is no connector to plug it into on the new drive. Apple has also provided a spare set of two connectors, identical to the two connectors on the left side of the OEM drive, which look to match the two connectors on the left side of the new drive. Is one of those two connectors the "SATA" power connector? Or are you saying there is a third "SATA" power connector hiding somewhere in the computer chassis that I cannot see? Trouble is, I don't know what a "SATA power connector" looks like. The only unused connector on the new drive is over on the right side of the rear, on the drive's PC card itself, recessed way back behind a cutout in the right side of the panel, i.e. the panel doesn't run all the way across the rear of the drive; it stops short, leaving an opening through which I can see the top of the PC card which has a very small four-pin connector attached. Is that the SATA power connector? Seems very small to be for power... ??

  • Permissions problem after adding 2nd hard drive and putting user home there

    I added a 2nd drive and put my user home on this. The reset password tip from command line at startup never sees this new volume, so I have been having to add my user to most files manually. Almost everything works now except iMovie. When I try to import it says I probably cannot write to the events.localize folder. I have tried symbolic links, manually editing the permissions, etc. no luck. Any ideas?

    ill try the fsck right now
    heres the output you requested
    Filesystem Size Used Avail Use% Mounted on
    /dev/sda3 7.3G 3.9G 3.0G 57% /
    none 505M 120K 505M 1% /dev
    none 505M 0 505M 0% /dev/shm
    /dev/sda1 99M 12M 83M 12% /boot
    /dev/sdb1 38G 93M 38G 1% /home
    total 46G 4.0G 42G 9%
    thats interesting.
    /dev/sda3 is showing its old values almost like something in the partition tables didn't get updated?
    Last edited by =OTS=G-Man (2009-12-09 06:19:55)

  • Dv7 3085dx won't power on after adding 2nd hard drive

    I'm attempting to add a 2nd drive to my laptop (dv7 3085dx). The drive is a Seagate Momentus 750GB drive (ST9750420AS). I purchased the drive caddy and connector from Newmodeus. The laptop will not power on after the drive is installed in the 2nd bay. Everything is fine if the drive is disconneted.
    Any ideas?

    Are you absolutely sure you got the right caddy and cable from newmodeus? They sell several different ones for the dv7 series and they look similar but are not compatible with each other. I understand the reluctance to try hot-plugging it.

  • 2nd hard drive blues

    I added a used Maxtor HD to my G4. When i got it the maxtor had been partitioned and i used it that way for about a year. Shortly after adding it, I decided to make it exclusive to my account on the G4 only. Everything was fine.
    Then I decided to reformat the maxtor so that it was no longer partitioned. It works fine now, but now it can be accessed by anyone else using my G4. I have no idea how to set it to be exclusive again.
    PLEASE HELP

    Select the drive in the Finder and choose Get Info
    from the File menu; under Ownership & Permissions,
    change the settings so that only your account can
    write to the drive while letting all accounts read
    it. Next, repeat this process with everything inside
    the drive, but choosing No Access for group and
    other. Setting either the group or other permissions
    for the drive itself to No Access may cause it to
    vanish until these instructions are followed.
    (21414)
    YES!!!! It worked. Of course, now i feel kinda dumb seeing as for that the longest I've been bouncing off of the Permissions box because I just couldn't remember what to do next--BTW, the magic momemnt came for me when I clicked on DETAILS. That was it. I've now secured the 2nd Hard Drive and all is right in my world. I guess it's true, the devil IS in DETAILS. Thanks

  • How do I get my Firefox bookmarks off of my old hard drive (now installed on my new computer as the 2nd hard drive) and into my new installation of Firefox on my new computer?

    I had a lovely computer, about 8 years old, running Windows XP; the mother board died; the hard drive was fine.
    I now have a new computer, running Windows 7, and I have the old hard drive as my 2nd hard drive.
    How do I get my old Firefox bookmarks off the old hard drive and into my new Firefox installation?

    You can find your current profile using about:support pasted into the location bar then click on "Open Containing folder. That is where you will want to replace your old files into.
    Next find your old profile on your old HD, see
    :https://support.mozilla.com/questions/886839
    With Firefox down replace the profile files you decide to replace.
    You might get a better idea of what you are doing or might want from also looking at
    * http://kb.mozillazine.org/Profile_folder
    * http://kb.mozillazine.org/Profile_folder_-_Firefox

  • My plan to get win7 on 2nd hard drive

    Hi all,
    I recently bought a new 15" MPB with an apple installed 128gb SSD drive.
    My plan was to install a 2nd hard drive in the DVD spot, a 500gb with a 70ish GB win7 partition. I would like to use Win 7 for screencasting for windows tutorials and for Gaming...mostly for gaming
    I thought, naively, that this would be a simple boot agent setup...boy was I wrong.
    I have already installed the 500gb drive in the optibay, it is working fine
    I did not realize that a macbook pro cannot boot to an external drive or dvd. I could be wrong here but all my research seems to indicate that it can't...using something like refit does not fix this problem
    I tried going through the boot camp setup with my external dvd drive attached through USB...did not work
    also tried a USB thumb drive...no dice
    I'd like to avoid having win7 on my 128gb ssd as there is limited space
    my current plan is this...if it doesn't make sense or seems wrong please let me know
    put the dvd drive back in
    make a bootcamp partition on the sad...maybe 35gbs
    install win7
    if thats working ok put the hard drive back in
    use win clone to clone the bootcamp win7 to the hard drive
    hopefully that will work...
    I'm just not sure how I'm going to partition the drive
    I would like a 100gb ntfs partition for windows
    and the rest partitioned mac
    looks like win clone can expand the image to the larger partition
    ipartition seems like it would work for this, but not sure
    any ideas on how I can make a ntfs partition on the internal?
    can I partition the drive with a windows machine? maybe do the 400gb as exfat?
    thanks

    Get http://www.virtualbox.org/
    It lets you setup your own Windows virtualized disk image anywhere you like it.  You'll still need to boot into Mac OS X, but it can run either seemlessly with Windows or full screen if you so desire.
    As for booting externally, Mac OS X has no trouble booting on external drives on any MacBook Pro.  As for Boot Camp, check with the Boot Camp forum.
    https://discussions.apple.com/community/windows_software/boot_camp
    Note, when using external hard drive for anything but backup, how many copies you have of information that is both on the internal and external drive.
    There should be at least two separate external copies of all your data somewhere in event one fails.

  • How to add a 2nd hard drive to HP Pavilion DV7!

    How to add a 2nd hard drive to HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.
    (1) Order HDD, hard drive, hardware kit. HDD hardware kit includes mounting rails, static shield, screws, rubber isolators, and SATA to motherboard cable. Check your model & Product # for compatibility.
         HP Parts HDD hardware kit 517639-001 for DV7-3165DX product# WA794UA and WA794UAR.
    (2) Consult Drives - Windows 7 PDF, table of contents, 7 Replacing a drive in the secondary hard drive bay. This will show you how to install a 2nd HDD in a HP DV7.
          Drives - Windows 7 PDF
    (3) In Windows 7 select Computer, Select the HDD installed, Format (if not already formatted).
    (4) If HDD does not show up in Windows 7 under Computer, go to Start (Menu), Search Programs and Files, enter "Computer Management", select Storage, Disk Management (Local), look for the Bay 2 HDD (should show up as Disc 1, Bay 1 HDD should show as Disc 0), Format the 2nd HDD (The one you just installed).
    Update: I have the 2nd HDD (WD 1TB) installed, Windows now recognises it after completing the steps I mentioned in step 4, Format with default allocation NTFS 931.51GB free, 118MB used for formatting. Format with default allocation exFAT 931.51GB free, 1MB used for formatting. I selected NTFS format to reduce file fragmenting.
    This question was solved.
    View Solution.

    When i added my 2nd HDD I was ready to get it ordered and shipped, so it would arrive before I arrived home. I also was not sure if it would be offered anywhere else and be 100% compatible. The quality of the factory HP part is good. Since then I found a cheeper source. Newmodeus DV7-3xxx Hard Drive Caddy $27.95 +tax +shipping. Not sure if the quality is the same. If this helps you, post your results and kudos.

  • 2nd hard drive for HP Pavilion dv7t-4000 CTO Notebook - What do I need?

    Hi, I have the HP Pavilion dv7t-4000 CTO Select Edition Entertainment Notebook (Product # WV703AV). It has room for two harddrives but only came with one. What would I need in order to install the second hard drive? Would I need just a connecting cable or do I also need caddy or kit?
    Also, could I get a solid state? Would my notebook support that or does it only use regular ones?
    Currently, I'm running Windows 7 64bit. I've got a 500GB hd (which came partitioned with hp tools/recovery).
    Any help with what I would need for a traditional hdd or ssd would be greatly appreciated. I tried to look through other people's posts first,  but couldn't find anything specific to my model. Thanks for your time!
    This question was solved.
    View Solution.

    Hi:
    The only place I know of where you can get a 2nd hard drive kit is from this vendor.
    http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345
    Your notebook should be able to work with a SSD but I cannot guarantee it.
    I really don't see any point in adding a SSD unless you make it the primary hard drive, and in order to do that, you would need to get a SSD the same size as the original 500 GB hard drive to use the recovery disks to reinstall the operating system.
    Most folks get smaller SSD's and they use the W7 product key to activate a plain installation of W7.
    If you can read all 25 characters of your windows 7 product key you can make your own installation media and use that to install Windows on a smaller than 500 GB SSD.
    If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
    Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
    Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link  below. You need a 4 GB flash drive to use the USB method of compilation.
    http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.html
    Use the 25 character product key on the PC to activate the installation.
    The key will activate either a 32 or 64 bit installation.
    Then go to the PC's support and driver page to install the drivers you need.
    Link to the W7 ISO file downloads is below.
    http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/

  • Looking for a 2nd hard drive on DV9700

    I want to add a 2nd hard drive to my HP dv9728ca. Are there any specs I should look for? Right now I have a 160GB hd, and the manual ( http://h10032.www1.hp.com/ctg/Manual/c01295898.pdf ) seems to indicate my only choices are 120GB or 160GB. According to the service manual, if I want a 200GB or 250GB, I can't use my 160GB anymore. The possible options are as follows : 250x2 (5400), 200x2 (4200), 160x2 (5400), 160+120 (5400), 120x2 (5400 or 7200, but both the same). Now I've upgraded computers before, even built some from scratch, and I've never seen this type of requirement. Is this for real? I've read a post from someone saying he had trouble with his new drive which was bigger than his original one. What about the 1.5GB/sec vs 3.0GB/sec? My understanding is that the 3.0 is downward compatible, but some seem to pretend you have to set a jumper on the drive to bring it down to 1.5. Any help would be appreciated. And what if I add a 7200rpm drive instead of 5400rpm? I don't see how these should cause any trouble, but from looking around it seems HP motherboards are very specific as to what they'll let you do. I already purchased the caddy kit, all I need is the hard drive, but I don't want to end up with one that's not compatible.
    If anyone's added an additional hard drive to a dv9700 series laptop, please let me know what model you chose (brand, capacity vs what you had, 5400/7200, 8MB/16MB).

    Hi, I have dv9730ca laptop myself and I have 2 160GB seagate 5400rpm 8MB hdd's, they have an external data transfer rate of 300MB/sec and an internal data transfer rate of 1.1GB/sec. They do get up to around 55oC (i use cpuid - hwmonitor to check this out) and I have heard using the 7200rpm hdd's can increase the heat output so I would recommend using the 5400rpm hdd's instead. The best way I have found to get over the heat issue from any laptop is to use a targus chillmat, it has 2 fans and runs off a usb port. I hope this info helps you out
    HP Pavilion DV9730CA - AMD Turion 64 X2 TL-64 2200MHz, 2GB (2x1024MB) SODIMM RAM, 320GB (2x160GB) Seagate 5400rpm HDD's, nVidia GeForce 8400 GS Graphics, Broadcom ABG Draft N Wireless, HD DVD SuperMulti DL DVD+RW, 4 USB 2.0, S Video, VGA, HDMI, Firewire, 5 in 1 card reader, RJ-45, RJ-11, Expansion Port 3, Expresscard 34/52.

  • WinXP dual boot Solaris on 2nd hard drive problem...

    Hi there ppl,
    run into a bit of a prob with dual booting winxp and solaris. I have WinXP on 1st hard drive and Solaris on 2nd hard drive 2 (Solaris - partition 1 with slice 0 x86 active, DOS - partition 2 for installing linux later, DOS - partition 3 for fat32 file storage later).
    I want to boot to Solaris on drive 2 from the WinXP boot loader on drive 1. Could somebody please tell me exactly how to do this as I've copied the bootsect.sun file from Solaris via floppy to the WinXP C:\ drive, and edited the WinXP boot loader to:
    [boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
    multi(0)disk(0)rdisk(1)partition(1)C:\bootsect.sun="Solaris/x86"
    and when I select to boot to Solaris I get:
    Windows could not start because the following is missing or corrupt:
    <Windows root>\system32\hal.dll
    Please reinstall a copy of the above file
    WinXP still boots ok.
    Any help would be much appreciated, thanks already.

    I am having a same issue....
    1.....1st 80 GB hard disk, I had window XP installed. (NTFS format)
    2....add 200 GB, 2nd hard drive, make 3 partitions, on first 50GB partition I have install Solaris 10.....Having some issue with network config, but its resolve, thank this forum.....
    Now, everytime when ever I need to go to Solarid, I have to go in BIOS screen and switch HD, I mean if I want to boot to solaris, I have to make a 2nd (200GB) hd primary..Soaris work fine, but from the GRUB menu, if I select window, its get hung up...
    now if I want to boot to window, again I have to go to BIOS and need to switch around hdd.... make 1st (80GB) hdd primary, windows work fine....
    Questions are, I do not want to go bacK & forth in BIOS.....
    1....Can some one help me, provide me the step-by-step information that how can i set up dual boot, so I can use my 2nd drive (200GB) as a primary and from the GRUB, I select windows and its boot to windows... if its otherway around,,,its still ok....I don't want my kids mess up BIOS....
    2...What is a chainloader+1...can some one explain?...what is +1 mean.
    3....How to install GRUB in MBR?
    Lion-O any ideas, how to boot windows bootloader from 2nd HD? Please step-by-step Instuctions....

Maybe you are looking for