Adding a child and set to center

I have a very simple script that adds a DisplayObject child to a canvas.... My code is below.
The only thing I cannot figure out how to do is make it to where the canvas is centered, like you would usually do with horizontalCenter="0" verticalCenter="0" ... For some reason or another, these options are not avaialbe in the actionscript...
Can anyone point me in the right direction?
private function AddNewCustomer():void {
        loadCanvas.visible = true;
        var AddCustomer:DisplayObject = new customer_form();
        AddCustomer.width = 500;
        AddCustomer.height = 500;
        AddCustomer.x = 50;
        AddCustomer.y = 50;
        loadCanvas.addChild(AddCustomer);

loadCanvas.setStyle("horizontalCenter", 0);
loadCanvas.setStyle("verticalCenter", 0);
Any property you don't see when you do loadCanvas.xxx you can usually set using setStyle.
Mark this as an answer if it helps out.
Thanks

Similar Messages

  • I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

    I just recently purchased a mini iPad for my child. It was set up in the Apple store with my Apple id. I now want to create an Apple id for my child and switch it over, how can I go about that. I already downloaded some of the games from my account.

    With a new account, you'll need to rebuy the games.
    Each user should have their own icloud account, otherwise they end up getting the same emails, contacts, calendars, notes, reminders, etc. - usually not what you want.  But if all have been sharing the same itunes ID, keep it that way, you can have different IDs for itunes and icloud.
    If you already have another icloud account, and want to set it up on a device, then go to Settings>icloud, scroll to bottom of screen and tap Delete Account.  This only disconnects the device from that account, no data is lost on icloud.  Then enter the account ID that you want to use.
    To create a new icloud account, go to
    http://www.apple.com/icloud/setup/

  • HT201089 I am setting up an Ipad for my child and downloading apps with Ask to Buy turned on.  As the parent, I am not receiving notices/requests on my device

    I have an ipad mini 2 with ios 8 and and iphone 5s with ios8
    I am setting up the ipad for my child and the Ask to Buy feature is on in family sharing.
    I am trying to download apps from the app store and it pops up the notification that I need to Ask to Buy and the request is being sent.
    The request should be coming to my "parent" device, which happens to be my iphone correct ?   I'm not seeing any sort of requests.
    According to the posts I've read a request is only sent once.

    Apps downloaded on one should also appear on the other as long as the app in question runs on both iPads and iPhones.

  • I added music to a set of clips but want to stop the music there and have no music in the rest of the movie. How do I do that?

    I added music to a set of clips but want to stop the music there and have no music in the rest of the movie. How do I do that?

    there are two ways applying music to an iM project
    http://help.apple.com/imovie/#mov3b0f955f
    as 'Background' which offers lots of automatisms, but lil' control
    or…
    http://help.apple.com/imovie/#mov3b0fb470
    as 'clip' - which can be handled asany other clip, edited, shortened, copy/paste, faded, located, etc

  • TS4268 I was accedentally deleted my facetime. then after that from now on i cant see my facetime button in my home screen and also in setting. im just see my facetime in setting noicifation center. and i tried to check at my contact i didnt see also face

    I was accedentally deleted my facetime. then after that from now on i cant see my facetime button in my home screen and also in setting. im just see only my facetime in setting>noicifation center. and i tried to check at my contact i didnt see also facetime in lower part. please help me,. thank you

    Hi LifeGood,
    Thanks for using Apple Support Communities.  In iOS, FaceTime is not a separate app and FaceTime calls can be made as described here:
    iOS: Using FaceTime
    http://support.apple.com/kb/ht4319
    How do I make a FaceTime call?
    You can make a FaceTime call in multiple ways, depending on your device:
    iPhone 4 or later: You can place a FaceTime call using the following apps:
    Phone: While on a phone call, you can tap the FaceTime icon to invite the other party to a FaceTime call.
    Contacts: Tap the FaceTime icon to place a FaceTime call to the contact you are viewing.
    iPad 2 or later, iPad mini, iPod touch (4th generation) or later, and FaceTime for Mac: You can place a FaceTime call using the following apps:
    FaceTime: Place a FaceTime call using your contacts list.
    Contacts: Tap the FaceTime icon to place a FaceTime call to the contact you are viewing.
    Note: There is no FaceTime app on iPhone. Use the Phone app instead.
    Cheers,
    - Ari

  • Possible Bug? Different behaviour for List and Set one-to-many mappings on deletePersistent()

    Hi,
    I have a PC class that represents a TreeNode object (a GcGroup), which
    has a one-to-many relationship with itself to keep track of its descendants.
    For example a hierarchy of A -> B -> C, where A has B,C as descendants
    and B has C as a descendant. This is tracked by adding or removing a
    descendant with a recursive method to update a TreeNode's parent's
    descendants when a child is added or removed.
    The odd behaviour happens when I delete a child and try to remove the
    child manually from all my parent's descendant relations when I use a
    HashSet (possibly happens with any Set). In this case kodo will remove
    the relations with the following SQL statement:
    DELETE FROM TREENODE_DESCENDANTSX JDOIDX = xxxx;
    So when I do my recursive call I get a JDOException thrown stating that
    the object xxxx has already been deleted.
    When I change the relationship to an ArrayList this exception is not
    thrown and I do not get the error.
    Looking at the SQL generated they look the same:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    27106317
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    28819334
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    10817575
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:21
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    UPDATE GCGroup SET JDOLOCKX=8, child_count=0 WHERE (id = 81 AND JDOLOCKX
    = 7)
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    27106317
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    8331873
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    10817575
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:21
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GROUP__DESCENDANTSX WHERE JDOIDX = 12300
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    27106317
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    8331873
    2002-10-31 20:21:42,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    10817575
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:21
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GROUP__USERSX WHERE group_id = 12300
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    27106317
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    8331873
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    10817575
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:21
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GCGroup WHERE id = 12300
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    27106317
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    10817575
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:21
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:21:42,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    commit data store transaction
    My methods look like the following:
    public void removeChild(TreeNode t) {
         _children.remove(t);
         removeDescendant(t);
    protected void removeDescendant(TreeNode t) {
         if (_parent != null) {
              _parent.removeDescendant(t);
         _descendants.remove(t);
    The following is the stack trace from the exception when using a HashSet:
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    30836962
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    UPDATE GCGroup SET JDOLOCKX=3, child_count=0 WHERE (id = 12450 AND
    JDOLOCKX = 2)
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    28630940
    2002-10-31 20:54:10,046 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    UPDATE GCGroup SET JDOLOCKX=41 WHERE (id = 2 AND JDOLOCKX = 40)
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29663640
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,062 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GROUP__DESCENDANTSX WHERE JDOIDX = 12451
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29663640
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GROUP__USERSX WHERE group_id = 12451
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29663640
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,078 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GCGroup WHERE id = 12451
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    5057297
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GROUP__DESCENDANTSX WHERE JDOIDX = 12452
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    5057297
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GROUP__USERSX WHERE group_id = 12452
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    5057297
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,093 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    DELETE FROM GCGroup WHERE id = 12452
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    roll back data store transaction
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    4629956
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,109 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    SELECT t0.id, t0.JDOLOCKX, t0.child_count, t0.description,
    t0.global_read, t0.global_write, t0.name, t0.owner_id, t0.parent_id,
    t0.rank, t0.root_id, t0.user_count, t0.user_exists, t0.visibility FROM
    GCGroup t0 WHERE t0.id = 12451
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] [ C:
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    18799851
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; S:
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    2951648
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; T:
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    29139395
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ; D:
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    02/10/31 20:54
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo] ]
    2002-10-31 20:54:10,125 INFO
    [com.solarmetric.kodo.impl.jdbc.ee.ManagedConnectionFactoryImpl.kodo]
    SELECT t0.id, t0.JDOLOCKX, t0.child_count, t0.description,
    t0.global_read, t0.global_write, t0.name, t0.owner_id, t0.parent_id,
    t0.rank, t0.root_id, t0.user_count, t0.user_exists, t0.visibility FROM
    GCGroup t0 WHERE t0.id = 12452
    2002-10-31 20:54:10,140 INFO [STDOUT]
    com.gulfnet.common.actions.GroupAction : The exception is:
    javax.jdo.JDOException
    2002-10-31 20:54:10,140 INFO [org.jboss.web.localhost.Engine] action:
    com.gulfnet.common.actions.GroupAction : The exception is:
    javax.jdo.JDOException
    2002-10-31 20:54:10,140 INFO [STDOUT]
    com.gulfnet.common.actions.GroupAction : java.lang.NullPointerException
    2002-10-31 20:54:10,140 INFO [org.jboss.web.localhost.Engine] action:
    com.gulfnet.common.actions.GroupAction : java.lang.NullPointerException
    2002-10-31 20:54:10,140 ERROR [STDERR] javax.jdo.JDOException:
    java.lang.NullPointerException
    NestedThrowables:
    java.lang.NullPointerException
    2002-10-31 20:54:10,156 ERROR [STDERR] at
    com.solarmetric.kodo.ee.EEPersistenceManager.rollback(EEPersistenceManager.java:169)
    2002-10-31 20:54:10,156 ERROR [STDERR] at
    com.gulfnet.usermanager.UserManager.deleteGroup(UserManager.java:775)
    2002-10-31 20:54:10,156 ERROR [STDERR] at
    com.gulfnet.common.actions.GroupAction.deleteObject(GroupAction.java:146)
    2002-10-31 20:54:10,171 ERROR [STDERR] at
    com.gulfnet.common.actions.GroupAction.doAction(GroupAction.java:58)
    Kam

    Forgot to add that I am using SQLServer 2000, Jboss 3.0.3 and Kodo 2.3.4
    Kam

  • Automatically create a custom VPN connection and set default wallpaper in a deployment...

    Hey guys,
    I've been hard at work on creating a custom deployment for our company to allow us to start rolling out Windows 7 at the first of next month. I demonstrated it to the brass today and they were blown away. All they asked for was two changes and I admit I'm stumped. Hopefully someone here can help:
    1 - Set Default Wallpaper for *all* users: I've written a script to copy our company wallpaper to "C:\Windows\Web\Wallpaper" during a deployment. Is there any way I can modify that script to set that wallpaper as default for anyone who logs into that computer. Or if there's a non-script way to do this I'm all ears. I just need that wallpaper as default.
    2 - Create a VPN Connection for our company intranet: Right now this is being done manually in the Network and Sharing Center. All they are doing is choosing "Set up a new connection or network" >> "Connect to a workplace" >> "Use my Internet Connection (VPN)" and just entering our VPN server IP Address and giving the connection a name. Surely there has to be a way to automate this with a script or something? Can anyone help?
    3 - BONUS: This is just gravy, but if anyone can tell me how to "silently" or "automatically" disable the "Highlight newly installed programs" checkbox for all users using a script or something, that would be *wonderful*.
    Can anyone help me here?

    1. Go here http://blogs.technet.com/deploymentguys/archive/2008/06/06/useful-script-number-5-adjusting-the-default-user-registry-hive.aspx . There is a script that will set your default wallpaper for you.
    2. Does your company use a VPN client?
    3. This option is set in the Registry. You could create a startup script or add this to your Task Sequence. Create the Dword and set it to 0 to disable highlighting.
    HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Start_NotifyNewApps
    Rich
    http://deploywindows7.wordpress.com/
    Thanks for responding Rich,
    1. I actually came across that script when I was poking around the Deployment guys forums, but I noticed that it did a lot more than just set the Wallpaper. I was trying to "keep it simple" plus the registry editing sort of made me nervous. I guess I can give it a go and see if it can be made to work for me.
    2. Our company dos not use a VPN client. If you look back at my description of the process in bullet point #2 we are just using the Network and Sharing Center that is built into Windows 7 to create a simple VPN connection. That's why I'm so certain there has to be a way to automate this process. ll we are doing is entering an IP Address and giving the connection a name. Surely I can script that, or is there maybe some way to create the connection on one computer and save it as a file that I can then copy to each machine during my deployment?
    3. Thanks for answering my bonus one too. Please forgive my ignorance because I am new to a lot of this. I assume I can create a "file" with the proper registry settings that can be applied during deployment right? I've seen people crate files that do this and use the .reg extension. Do you know how to make one of these or can you link me to a tutorial that steps me through it?
    You could always edit the script to leave the other parts out.  Thanks for the clarification on the VPN Client, just wanted to make absolutely sure. Let me know how if the process you found works for you.
    For the reg key, you would want to create the key I described, add it to your scripts directory, and then add a Client Build Custom Task in StateRestore to set the key in the registry. You can do this by adding a RunLineCommand to the Task Sequence. Then the command would look like this
    cmd /c regedit /s %deployroot%\scripts\NameOfRegKey.reghttp://deploywindows7.wordpress.com/

  • How to create a single action for adding a border and signature for portrait AND landscape images???

    i would love to be able to create a single photoshop action for adding a border, plus a signature in the bottom right corner, that works for both portrait and landscape images.
    need i say more?!
    i already have an action that adds a signature in the centre of the border at the bottom of the image e.g. the image below. what i want though is for that signature to be on the RHS and for the same action to work for portrait images as well.
    supplementary info: reason for this is that I want to be able to export 300 wedding images (mix of landscape and portrait images) from lightroom in my pre-selected order (meaning the files are labelled from 001 to 300, ordered according to how the wedding day unfolded) and then use PS to add the border and the signature, in the same place, and for it to work for both orientations.
    i need this to work for full sized exported jpeg images, i.e. i want the files that i give on CD to my clients to include my signature in this manner. so I don't want to copy the initial layer and then reduce the second layer size to leave a border around the second layer.
    i hope i've been clear and that someone can help me here. I think that this sort of presentation makes such a difference to final printed image, and I DONT want to have to go to all 300 images picking out the landscape from portrait ones (although this may be what I have to do and wouldn't really take that long but surely there's a better way!!!!).
    Thanks in advance photoshoppers ...

    It is actually quite easy to do if you have a good understanding of how Photoshop works.  To be able to handle any size Landscape and Portrait you need to scale the document to a known width or height.  Once the document is resized to the width or height it easy.  When yot resize the document you use Image size with resample NOT checked.  Not a single image pixels is changed all the happens is the documents DPI is set to the proper DPI resolution to print that size.  This lets you add a border sized for and document.  You can use Canvas Size check relative and  leatve the anchor point centered and set width and height to 2" this will add 1"on all sides. Use Canvas size a second time move the anchor point to the top center check relative and set height 1" the will add an additional 1" border on the bottom.  You then record a text layer with your Name title or what ever to the top left of the image. Select all ant the align the text layer to the selection to move it to the bottom right.
    Adding a couple of scripts to the action you can make sure there is a background layer so the added canvas will be filled with pixels.  You can restore the document to its original DPI resolution to retain the images print size. Down load my crafting actions package it contains a dozen scripts to be used within actions. There are text file with tips and guidelines additionaly there is one on dealing with document size and includes a sample action set with a watermarking action the can watermark and size image. The Action set is also saved as a text file with additional comments I added my downloads can be found here http://mouseprints.net/Photoshop.html

  • Adding a 2nd and 3rd Drive

    I just added a 2nd and 3rd ata drive to my 450 MHZ tower. The motherboard had an open plug that said ata.
    I plugged in the cord (strip) that came with the drive into the board and into the additional hard drives.
    (fyi) I took both hard drives and strip from a working unix server.
    I plugged in power to each.
    I started up the mac. It shows the 1st drive on the desktop, but no others. Disk utility doesn't see the new drives either.
    What did I miss?
    Any help would be greatly appreciated. Thanks.
    PowerMac G4 (AGP graphics) (version =2.9) Mac OS X (10.2.x) 9 GB SCSI
    PowerMac G4 (AGP graphics) (version =2.9) Mac OS X (10.2.x) 9 GB SCSI

    Hi omoriginals ,
    Welcome to the Discussions.
    Your computer can only mount two drives unless you add another ATA controller card in an empty PCI slot. There's one bus that has the ability to control two drives.
    The additional drive and cable you installed will need to be removed. The other that you attached to the existing data cable needs to have its jumper set to "slave" and then attach it to the center position on the cable. The jumpers are small plastic and metal blocks that connect two pins located next to where the data cable attaches to the drive. There should be a diagram on the drive for the settings. Just set it, reinstall then format it with Disk Utility (in your Utilities folder).
    John

  • Adding a child to spark scroller in as

    Tried adding a child (group) to the scroller class by using the viewport function but it didnt seem to work. is there a way to add a scroller via as and then adding a group as its child ? right now the scroller was added to the stage using addElement and the group was added as its viewport. I tested by adding a textarea to the group and it did display. however i didnt see any scrollbars even though the textarea was 3000 pixels high.

    Hi,
    The following code is one way you can set up a scroller, when you add something to the group the scrollbars will appear if that object exceeds the scroller boundaries. When you add the oversized child component(I used a list here for simplicity) the scrollbars will kick in.
    David
    <?xml version="1.0" encoding="utf-8"?>
    <s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
       xmlns:s="library://ns.adobe.com/flex/spark"
       xmlns:mx="library://ns.adobe.com/flex/mx">
    <fx:Script>
    <![CDATA[
    import mx.controls.List;
    protected function button1_clickHandler(event:MouseEvent):void
    var mylist:List = new List()
    mylist.x=0;mylist.y=0;mylist.height=500;mylist.width=500;
    grp.addElement(mylist);
    ]]>
    </fx:Script>
    <s:Scroller left="10" top="10" width="400" height="400" id="scroller" minViewportInset="1" hasFocusableChildren="true">
    <s:Group id="grp" top="0" left="0" bottom="0" right="0"/>
    </s:Scroller>
    <s:Button x="32" y="446" label="Button" click="button1_clickHandler(event)"/>
    </s:Application>

  • TS4006 How do I add iphone4s to iCloud's "find my phone"? I turned on macbook pros system prefs to "find my phone", turned on iphone4s's "location services" and set up iCloud, etc. iPhone4s still won't show-but macbook does show. It receives gmail, weathe

    How do I add my new iPhone4s to iCloud's "Find my iPhone"? I followed the iCloud instructions and turned on Macbook Pros' system prefs to "find my mac", turned on iPhone4s's "location services" and set up iCloud, etc. In the "Find my iphone" tab of my new iCloud account (on my Macbook Pro) my iPhone4s still won't show—but my macbook does show. I had my iPhone4s set up at the phone store (2 days ago) and It receives gmail, my contacts and calender entries, the weather, etc. I installed the "Find iPhone" app from iTunes on the iPhone4s, synched to iTunes, even reset the phone, but the only device that gets located is my Macbook Pro. I can send a "sound" message to my Mac (and the Mac recieves it) but unable to see the iPhone4s from my Mac, let alone send any message. Any suggestions to get the iPhone4s device to appear in iCloud?
    Thank you in advance for your help.

    OK, I figured it out...I deleted the iCloud account off my iPhone (Settings, iCloud, Delete Account), and then added iCloud back in (Settings, iCloud, SignIn)....and then my email (iCloud) and "Find my phone" features worked! Nice!!!!

  • Get and Set Parameter ID in BDC Call transaction

    Hi all
    I have written this BDC program to run a transaction eg33  to install meter. After meter get installled System generates  Device location number. I need to use this device location number in calling another transaction il03.  but my data fetching using get and set parameter id is not giving accurate result. Kindly check my code and suggest where should I improve. Or whatelse can I do to fullfill this type of requirement other than GET and SET PARAMETER ID.
    REPORT  ZAC_EG33 NO STANDARD PAGE HEADING
                     LINE-SIZE 100.
    TABLES: EABL,
            BUT000,
            ZISUH0003.
    DATA :
          XYZ LIKE IFLO-TPLNR.
    DATA: IT_STATUS TYPE ZISUH0003.
    DATA: G_INDEX TYPE I,
          G_START_COL TYPE I VALUE '1',      "start column
          G_START_ROW TYPE I VALUE '14',      "start row
          G_END_COL   TYPE I VALUE '18',     "maximum column
          G_END_ROW   TYPE I VALUE '75',  "maximum row
          G_TEXT(20),                         "stores error messages
          G_PAGES        TYPE I,
          G_CURRENT_PAGE TYPE I,
          G_COUNT LIKE SY-DBCNT.
    data: l_file   type file_table,
          file1    type string,
          l_title  type string,
          LENGTH   TYPE I,
          FILES    type filetable,
          SUBRC    type i,
          STR_FILE type STRING,
          D_FILE   type RLGRAP-FILENAME,
          filename TYPE String,
          L_itab_date(10).
    FIELD-SYMBOLS : <FS>.
    DATA: IT_EXCEL LIKE STANDARD TABLE OF ALSMEX_TABLINE WITH HEADER LINE,
          IT_MESS TYPE STANDARD TABLE OF BDCMSGCOLL WITH HEADER LINE.
    TYPES: BEGIN OF TY_OPEN,
            HAUS LIKE REG30-HAUS,
            EADAT(10),
            GERAETNEU LIKE REG30-GERAETNEU,
            MESSDRCK LIKE REG30-MESSDRCK,
            ZWSTANDCE LIKE REG30-ZWSTANDCE,
            END OF TY_OPEN.
    DATA : T_ANLAGE LIKE EANLD-ANLAGE,
           VSTELLE LIKE EVBS-VSTELLE,
           S_ANLAGE LIKE EANLD-ANLAGE,
           temp_c(7).
    DATA: IT_OPEN TYPE STANDARD TABLE OF TY_OPEN WITH HEADER LINE.
    DATA: BDCDATA TYPE STANDARD TABLE OF BDCDATA WITH HEADER LINE.
    SELECTION-SCREEN BEGIN OF BLOCK 1 WITH FRAME TITLE TEXT-001.
    SELECTION-SCREEN SKIP 2.
    PARAMETERS: P_FILE like RLGRAP-FILENAME OBLIGATORY.
    SELECTION-SCREEN SKIP 2.
    SELECTION-SCREEN END OF BLOCK 1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE  .
      PERFORM GET_FILE_NAME.
      MOVE FILENAME TO P_FILE.
    START-OF-SELECTION.
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
      EXPORTING
        FILENAME                      = p_file
        I_BEGIN_COL                   = 1  "VF_START_COL
        I_BEGIN_ROW                   = 2  "VF_START_ROW
        I_END_COL                     = 5  "VF_END_COL
        I_END_ROW                     = 10000  "VF_END_ROW
      TABLES
        INTERN                        = IT_EXCEL
      EXCEPTIONS
        INCONSISTENT_PARAMETERS       = 1
        UPLOAD_OLE                    = 2
        OTHERS                        = 3
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    IF IT_EXCEL[] IS INITIAL.
      G_TEXT = 'No Data Uploaded'.
    ELSE.
      SORT IT_EXCEL BY ROW COL.
      LOOP AT IT_EXCEL.
        MOVE : IT_EXCEL-COL TO G_INDEX.
        ASSIGN COMPONENT G_INDEX OF STRUCTURE IT_OPEN TO <FS>.
        MOVE IT_EXCEL-VALUE TO <FS>.
        AT END OF ROW.
          IF NOT IT_OPEN IS INITIAL.
          APPEND IT_OPEN." TO IT_LINE.
          CLEAR IT_OPEN.
          CLEAR IT_EXCEL.
          ENDIF.
        ENDAT.
      ENDLOOP.
    ENDIF.
    REFRESH IT_EXCEL.
    ULINE.
    FORMAT COLOR 3 ON.
    WRITE: /1 sy-vline ,
           2 'Material No.' ,
           25 sy-vline,
            2 'Logs' ,
            100 sy-vline.
    uline.
    FORMAT COLOR OFF.
    PERFORM BDC_OPEN_READING.
    MESSAGE S013(ZPS).
    *&      Form  GET_FILE_NAME
          text
    -->  p1        text
    <--  p2        text
    FORM GET_FILE_NAME .
    REFRESH FILES.
    call method cl_gui_frontend_services=>file_open_dialog
                exporting
                  window_title            = l_title
                changing
                  file_table              = files
                  rc                      = subrc
                exceptions
                  file_open_dialog_failed = 1
                  cntl_error              = 2
                  error_no_gui            = 3
                  others                  = 4.
              check sy-subrc = 0.
              loop at files into l_file.
                str_file = l_file.
                move str_file to filename.
                exit.
              endloop.
    ENDFORM.                    " GET_FILE_NAME
    *&      Form  BDC_OPEN_READING
          text
    -->  p1        text
    <--  p2        text
    FORM BDC_OPEN_READING .
    LOOP AT IT_OPEN.
    REFRESH BDCDATA.
    clear : temp_c.
    move it_open-MESSDRCK to temp_c.
    condense : temp_c.
    PERFORM MAP1.
    CALL TRANSACTION 'EG33' USING BDCDATA MODE 'A' MESSAGES INTO IT_MESS.
    +***changes by added on 28/02/08 +
    get parameter id 'IFL' FIELD XYZ.
    PERFORM MAP2.
    set parameter id 'IFL' FIELD XYZ.
    ++*
    CALL TRANSACTION 'IL03' USING BDCDATA MODE 'A' MESSAGES INTO IT_MESS.
    +****end change added on 28.02.08+DATA: G_INSNO LIKE IT_OPEN-HAUS.
    IF NOT IT_MESS[] IS INITIAL.
      G_INSNO = IT_OPEN-HAUS.
      PERFORM GET_MESSAGES  TABLES IT_MESS USING G_INSNO." IT_LINE.
    ENDIF.
    READ TABLE IT_MESS WITH KEY MSGTYP = 'E'.
    IF SY-SUBRC NE 0.
    READ TABLE IT_MESS WITH KEY MSGTYP = 'S'  MSGNR = '622'.
    IF SY-SUBRC EQ 0.
    SELECT SINGLE VSTELLE FROM EVBS INTO VSTELLE WHERE HAUS = IT_OPEN-HAUS.
    SELECT SINGLE ANLAGE FROM EANL INTO T_ANLAGE WHERE VSTELLE = VSTELLE.
    MOVE T_ANLAGE TO IT_STATUS-ANLAGE.
    MOVE 'X' TO IT_STATUS-RFC.
    *perform get_date_format using IT_OPEN-EADAT.
    MOVE IT_OPEN-EADAT TO IT_STATUS-ADATE.
    SELECT SINGLE ANLAGE FROM ZISUH0003 INTO  S_ANLAGE WHERE ANLAGE =
    T_ANLAGE.
      IF SY-SUBRC EQ 4.
        INSERT ZISUH0003 FROM IT_STATUS.
      ELSE.
        UPDATE ZISUH0003 FROM IT_STATUS.
      ENDIF.
      ENDIF.
      ENDIF.
      REFRESH IT_MESS.
      CLEAR   IT_MESS.
    ENDLOOP.
    ENDFORM.                    " BDC_OPEN_READING
           Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR BDCDATA.
      BDCDATA-PROGRAM  = PROGRAM.
      BDCDATA-DYNPRO   = DYNPRO.
      BDCDATA-DYNBEGIN = 'X'.
      APPEND BDCDATA.
    ENDFORM.
           Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
      IF FVAL <> SPACE.
        CLEAR BDCDATA.
        BDCDATA-FNAM = FNAM.
        BDCDATA-FVAL = FVAL.
        APPEND BDCDATA.
      ENDIF.
    ENDFORM.
    *&      Form  MAP1
          text
    -->  p1        text
    <--  p2        text
    FORM MAP1 .
    perform bdc_dynpro      using 'SAPLE30D' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'REG30-GERAETNEU'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'REG30-HAUS'
                                  IT_OPEN-HAUS.  "'100000000033'.
    perform bdc_field       using 'REG30-EADAT'
                                  IT_OPEN-EADAT.  "'18.02.2006'.
    perform bdc_field       using 'REG30-GERAETNEU'
                                  IT_OPEN-GERAETNEU.  "'66a'.
    perform bdc_dynpro      using 'SAPLE30D' '0220'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'REG30-TEMP_AREA(02)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=SAVE'.
    perform bdc_field       using 'REG30-MESSDRCK'
                                   temp_c. "IT_OPEN-MESSDRCK'0.0125'.
    perform bdc_field       using 'REG30-GERWECHS'
                                  '05'.
    perform bdc_field       using 'REG30-ANZDAYSOFPERIOD(01)'
                                  '30'.
    perform bdc_field       using 'REG30-ZWSTANDCE(01)'
                                  IT_OPEN-ZWSTANDCE.  "'10'.
    perform bdc_field       using 'REG30-ZWSTANDCE(02)'
                                  '0'.
    perform bdc_field       using 'REG30-PERVERBR(01)'
                                  '0'.
    perform bdc_field       using 'REG30-PERVERBR(02)'
                                  '0'.
    perform bdc_field       using 'REG30-TEMP_AREA(01)'
                                  '0001'.
    perform bdc_field       using 'REG30-TEMP_AREA(02)'
                                  '0001'.
    perform bdc_field       using 'REG30-PR_AREA_AI(01)'
                                  '0001'.
    perform bdc_field       using 'REG30-PR_AREA_AI(02)'
                                  '0001'.
    ENDFORM.                    " MAP1
    ****CHANGEs added BY ALKA 28.02.08
    *&      Form  MAP2
          text
    -->  p1        text
    <--  p2        text
    FORM MAP2 .
    perform bdc_dynpro      using 'SAPMILO0' '1110'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'IFLO-TPLNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'IFLO-TPLNR'
                                  XYZ..
    perform bdc_field       using 'RILO0-TPLKZ'
                                  'AO_GP'.
    perform bdc_dynpro      using 'SAPMILO0' '2100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'IFLO-PLTXT'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=T\04'.
    perform bdc_field       using 'IFLO-PLTXT'
                                  'DEVICE LOCATION'.
    perform bdc_dynpro      using 'SAPMILO0' '2100'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=BU'.
    perform bdc_field       using 'IFLO-PLTXT'
                                  'DEVICE LOCATION'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'ITOBATTR-EINZL'.
    perform bdc_field       using 'ITOBATTR-IEQUI'
                                  'X'.
    perform bdc_field       using 'ITOBATTR-EINZL'
                                  'X'.
    ENDFORM.                    " MAP2
    *****END CHANGE added on 28.02.08
    *&      Form  get_date_format
          text
         -->P_IT_ORDER_TABLE_C_DATE  text
    FORM get_date_format USING L_ITAB_DATE." LIKE SY-DATUM.
    data: d_temp(4),
          m_temp(2),
          y_temp(4).
    *move L_ITAB_DATE to L_ITAB_DATE.
    y_temp = L_ITAB_DATE(4).
    m_temp = L_ITAB_DATE+4(2).
    d_temp = L_ITAB_DATE+6(2).
    CONCATENATE d_temp '.' m_temp '.' y_temp into L_ITAB_DATE.
    ENDFORM.                    " get_date_format
    *&      Form  GET_MESSAGES
          text
         -->P_IT_MESS  text
         -->P_G_INSNO  text
    FORM GET_MESSAGES  TABLES IT_MESS STRUCTURE BDCMSGCOLL USING G_INSNO .TABLES T100.
    DATA: L_MSTRING(255).
    LOOP AT IT_MESS WHERE MSGTYP = 'E'   OR MSGTYP = 'S'.
          SELECT SINGLE * FROM T100 WHERE SPRSL = IT_MESS-MSGSPRA
                                    AND   ARBGB = IT_MESS-MSGID
                                    AND   MSGNR = IT_MESS-MSGNR.
          IF SY-SUBRC = 0.
            L_MSTRING = T100-TEXT.
            IF L_MSTRING CS '&1'.
              REPLACE '&1' WITH IT_MESS-MSGV1 INTO L_MSTRING.
              REPLACE '&2' WITH IT_MESS-MSGV2 INTO L_MSTRING.
              REPLACE '&3' WITH IT_MESS-MSGV3 INTO L_MSTRING.
              REPLACE '&4' WITH IT_MESS-MSGV4 INTO L_MSTRING.
            ELSE.
              REPLACE '&' WITH IT_MESS-MSGV1 INTO L_MSTRING.
              REPLACE '&' WITH IT_MESS-MSGV2 INTO L_MSTRING.
              REPLACE '&' WITH IT_MESS-MSGV3 INTO L_MSTRING.
              REPLACE '&' WITH IT_MESS-MSGV4 INTO L_MSTRING.
            ENDIF.
            CONDENSE L_MSTRING.
          ENDIF.
          CONDENSE G_INSNO.
          CONCATENATE 'For' ' ' G_INSNO ',' L_MSTRING INTO L_MSTRING SEPARATED BY SPACE.
    FORMAT COLOR 2 ON.
    *IF IT_MESS-MSGTYP = 'S' AND IT_MESS-MSGNR = '622'.
    *WRITE: 1 sy-vline,
            L_MSTRING    under 'Error Messages',
           100 sy-vline.
    *ULINE.
    *ELSEIF IT_MESS-MSGTYP = 'E'.
    WRITE: 1 sy-vline,
             L_MSTRING    under 'Logs',
            100 sy-vline.
    ULINE.
    *ENDIF.
    ENDLOOP.
    ENDFORM.                    " GET_MESSAGES

    i think there might be some time gap between CALL TRANSACTION and GET PARAMETER ID.....,that is to say,the new No. has not been generated and what you fetch is an old No..
    i think you should use the "CALL TRANSACTION" like the following one:
    CALL TRANSACTION 'EG33' USING BDCDATA MODE 'A'  UPDATE 'L'  MESSAGES INTO IT_MESS .
    then i think you can get the right value.
    P.S: the different update model(from SAP document)
           upd Effect
    "A"   Asynchronous update. Updates of called programs are executed in the same way as if in the             COMMIT WORK statement the AND WAIT addition was not specified.
    "S" Synchronous processing. Updates of the called programs are executed in the same way as if in the COMMIT WORK statement the AND WAIT addition had been specified.
    "L" Local update. Updates of the called program are executed in such a way as if the SET UPDATE TASK LOCAL statement had been executed in it.
    Other As for "A".

  • Airport Express (Model with 802.11G +54MBPS Mac/PC and Set Up Issues

    Hi,
    We have a 4 Mac and 1 PC Household. Cable Internet Service by Roadrunner.Cable model (owned) connected to a D-Link 802.11G wi fi router (by ethernet from cable modem)in the family room , then out to a Imac (the half moon base and LCD screen with a airport card also in the family room and the closet computer to the D-Link
    router, (we did add a D-Link antenna to the router ? about 10 months ago (a D-Link ANT24-0700 (Version 1.2)and a HP 4 in 1 printer attached via USB to the Imac
    ,a eMac 1.25 ghz 1Gb ram with airpot card also connected wirelessly (no printer attached on the same floor but in a ajoinging room about 20 feet from the Router, and another eMac 1.0 Ghz 1Gb ram with airport card in the upstairs part of our house (a bedroom) and no issue with Internet connection (it has a Epson 3in 1 printer attached via USB, and a MacBook Pro with 802.11N wireless card in side , bought for a Christmas/Birthday Present and also for college.It to has no issues with the Internet where ever it may be in the house. Our sole PC a HP tower with a added D-Link WDA -2320 Range Booster Desktop Adapter (802.11G) and we added a D-Link Antenna same model as the other a ANT24-0700 to help with Internet access which it did as well as adding some ram to increase page loading time etc. It does not have a printer attached. I will get to the Topic Area now
    The Airport Express. I was not involved in the set-up as I was laid up due to a bad back and post major knee surgery , But I always (especially recently) wondered why the light was amber and blinking. I read through the manual and also
    Apple.com support and MacFixit.com (which is under construction and moved to part of Cnet.com)and then went to the Airport Express Discussion area (sorry for being so wordy) I need a Twitter account to post!) We have a network name for the D-Link and the computers all were added and it also supports a Xbox 360, a Sony PlayStation 3 and a Nintendo Wi (in online use without issue) but..
    A network was also as it appears to myself) for the Airport Express and under the half moon bars showing connection strenght (there is our D-Link network "phoenix" with security protection WPA2 I believe) as I have set up the router, We had a Apple Base station prior that was ? 802.11B (a half moon white unit) still have it in the box ) So for normal daily use, checking e-mail and internet use all of the computers use the "phoenix" or D-Link supported Router 802.11G
    and The other network calld Apple Network with numbers and letters after it (and hopefully security) password is unknown , The Airport Express is set up connected via USB to a HP B&W laser printer which has saved quite a bit of money on ink, To utilize that printer you must switch from "phoenix" The D-Link router network to the Apple Network (followed by letters and numbers) The Imac and the eMac in the family room and a ajoing room (after switching to the Apple Network
    can than print to the lasr printer. The eMac upstairs and the HP Windows XP Professional software can not print to the laser printer (yet the HP PC shows it as a individual network and a strong signal, equal to the Internet connection from the D-Link, and the eMac (after switching under the half moon (not the proper name I am sure) to get to the Apple Network to print , it will not print, yet it shows a 5 bar signal, same as the D-Link connection. I do believe we have two seperate networks (but do not understand why the two Mac's in the family room can print to the laser printer by simply switching networks and then file and print. ** One other 9probaly major item is that it states to set up the Airport Express with a Mac With OSX 10.4 or later (at the time of set up, we had the Imac and two eMac's all running Panther OSX 10.3.9 9which they continue to have installed) We obtained the HP Tower and Monitor and HP 4in 1 printer ust before Christmas in 2008 and the MacBook Pro in Mid December 2009 (current model and running Snow Leopard 10.6. The HP Tower runs Windows Xp Professional (Service Pack 3) so the MacBook Pro which is much more mobile , could be used to do the set-up, or the HP Tower coulf be moved temprarily, I do recall if Router changes (at least with The D-Link You need to be connected by Ethernet to the Mac
    that would be doing the set up/configuration of the router (and it runs OSX 10.3.9 and is a older Mac (with 80Gb Hard drive that is partioned for OS9 and OSX as well , it is under a Ghz processor wise and less than 1 Gb of ram as the last ram slot required a seal to be broken and 256mb of ram (?) could be added
    it has 768 mb of ram but knock on wood running well. We use Lacie external drives
    on the Imac and both eMac's and need to get external drives for the HP PC as well as the Mac Book Pro (15" screen)
    I apoogize if I repeated myself, and rambled but I wanted to (in one post) to explain our set up and network configuration
    Questions
    1) if indeed it is that the two networks is true and a set yp that is not correct
    can the Airport Express be configured without opening up the router (when ever that happens it seems one computer is unable to get online and each time its a differnt one a Mac or veen the PC
    The PC under My Computer and Networks clearly shows the wto distinct and seperate netwoks with strong signals and the distance is not far (it is through a floor as the other emac and the PC are upstairs and cabling by ethernet is not a option
    2) If I need to open the router would I add the Airport Express as a client as if it was one of the computers or gaming systems on the network? (adding the Mac adress or IP address (not sure how you find the Mac address) and its been while since the router was opened up for any additions or work on it.
    3) would it be on the same channel as the router or not ?
    4) Hopefully with proper configuration the light will stay on (and green) on the A/E and the eMac and HP PC will be able to print to the laser printer. Currentlt
    when anything needs printed from the PC its put on a Flasg Drive and plugged in tothe Imac and the the Apple Network is selected and data printed, The eMac upstairs has the option of using the attached Epson 3 in one or doing the Flash stick work around.
    I would be verya appreciative if some one took a look at the set up above and advised me of what is right, what is not right* and what to do to fix things up
    I would imagine after proper set up, delete the Apple Network from the PC and eMac upstairs and ? all of the computers as we should have one base station (the D-link and the spoke (the A/E connected by UBS to the A/E (it may be ethernet but the cable connection from the A/E to the HP laser printer is correct (the rest of the A/E set up ... Please , tell me where it is and where it should be
    and ? any idea why we can print to the laser printer down stairs and not up stairs ? it did mention printer set up with Panther as possible, page 43 of themanual we have un chaper 5 Tips and Troubleshooting (under whn your printer isn't responding) (we do not have the interfereance listed in the manual,
    our phones are land line, one 900 mghz and the others 5.8 ghz
    It is possible to move the A/E and laser printer if that would help the two computers (desktops) upstairs) bt the distance is way less than 150 but their is a floor and ? duct work (metal ) but I think here is a place to stop typing and let some of the experts on the discussion forums take a look.
    one lst note (as the lap top will be going off to college in the fall (runnning Snow Leopard, and the other 3 Mac's run Panther OSX 10.3.9 should the HP PC windows Xp Professional be the computer to set up the air port express and the Airport Utility proram installed & would this conflict with the current Router (set up by a Macc running OSX 10.3.9 (Panther) i.e (should both set ups be on the same computer?) but actually aThe D-Link is OSX10.3.9 compatible (and 802.11G) and set up requires ethernet connection to a Mac (You type in the numbers and . etc and password as administror and you are in, or should the admin be on the same cpmpuer for the router and A/E ?
    (and considering a Airport Extreme Base Station as well as dual frequency simulataneus and 802.11N (for the laptop now) and future, or wait. The 802.11
    in theory would broadcast farther..?? even if computers had 802.11b(our Mac Desk tops and the PC 802.11B card
    Thanks Again!!!
    Many, Many Thanks
    amnienttales

    William Boyd Jr.
    Hello again,
    D-Link Router is model DGL-4300 (along with a D-Link ANT24-0700 Omnidirectional
    7dbi Antenna . Our Cable Internet ISP (Roadrunner) provides consumers with dynamic ISP address's . All Mac's have Airport Cards and The Hp Tower XW4550 has a D-Link Rangebooster G Desktop Adapter WDA-2320 (also with a D-Link ANT24-0700 Omnidirectional 7 dbi Antenna (the PC OS is Win XP Pro Service Pack 3) The 3 desktop Mac's run OSX Panther 10.3.9 , The 15" MacBook Pro OS is OSX 10.6 Snow
    Leopard (not sure what is after the .6 (right now) D-Link's website is
    http://www.dlink.com , I have configured this router multiple times in the past.
    also added as clients on the network (Utilizing the D-Link Router) are a X-Box 360, Sony Play Station PS3, and a Nintendo Wii all of which have on line ability
    and enables online video game play with any one online.
    As mentioned prior the Airport Port Express is Model A1084 Part No. M9447OLL/A
    which is USB conected to a HP LaseJet B&W , model 1020 and some how the two computers near it can switch to the Airport Express Network from the D-Link Router based Network and print wirelessly to the A/E connected LaserJetPrinter
    I realize I will need to reconfigure the D-Link Router and add the A/E as a client. I will try first to use the Airport Utility and see if I can do anything
    Utilizing it (adding it to the D-Link network, I think its unlikely but worth a try but* the password is unknown but I have a few guess's as to what it may be.
    I do have the necessary admin and network paswwords to cconfigure the D-Link Router,
    1) * If the the A/E Utility experiment fails and I need to re-configure the router * do I need to (as per the Airport Express Set Up Guide (Use a Mac with OSX 10.4 or later or a PC with Win Xp Home or Professional (have a desk top PC that has the specs) and The Mac Book Pro meets the Mac Spec's)
    If I can not get a password to work on the A/E I would reset it using the reset button
    And before plugging in the A/E , connect the appropraite cables in our case a USB cable to the LaserJet Printer then plug in the A/E
    2) I would then connect by Ethernet from Either the Mac Laptop or The PC to the D-Link router (if not the router will not set-up correctly)
    3) The one question that puzzles me is that we are not using the A/E as a base
    but a client
    in two sections(Using Airport Express , connecting a Printer via USB
    and use Airprt Utility to create a new network or join a new newWireless computers using Mac OSX 10.2.7 (Tiger) or later or a PC with Windows XP and it then goes in to the steps of ising the printer for both a Mac and a PC (using Bonjour on the CD that came with the A/E (this appears to contradict needing to use Mac OSx 10.4 or a PC with Win Xp set the A/E up for use as a printer
    (joiing a new network or existig one)
    And in Chapter 5 Tips and Roubleshooting= Your Airport Express Status Light Flashes amber & Your Printer is not responding (it is flashing amber and the printer does not respond to the two computers upsstairs (one Mac running OSX 10.3.9 & One PC running WinXp and its states to make sure the printer is selected
    in the Printer list o client computers, to do this on a Mac using OSX 10.3 or later , open Printer Set Up Utility and follow steps and if a PC with Windows XP , Open Printers and faxes and then follow steps
    in Closing ? can I configure the A/E Utility with a Mac using 10.3.9 as above or
    ? Per Chapter 1 Getting Started use a Mac with OSX 10.4 or later or a PC with Windows Xp Home or Professional
    Perhaps I am taking the tips and trouble shooting and Printer Set up out of context or does the getting Started Computer specs contradict them or are they
    for use if the A/E was going to be a Base Station and not a client..
    Will keep at it,
    ambienttales

  • Mail on my iPhone and iPad no longer works on wifi. If I turn wifi off I can connect over the cellular network. I have tried deleting my AOL account and setting it up again as a new account but I still have the same problem.

    Mail on my iPad and iPhone has stopped connecting using wifi. If I turn wifi off I can connect using cellular. I have tried deleting my AOL account and setting it up again as a new account but that hasn't helped.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom 

  • How to open standard New Contact Dialog and set phone for it on WIndows Phone 8.1

    It is not possible to add contact to strandard collection. You can add contact only to your application collection. But if your application will be removed you will lost all it contacs.
    That's why I want to open standard windows phone 8.1 dialog for adding new contact user and set Phone in it.
    Is it possible to open standard dialog for adding contact with specifi info from C# ?
    My .NET Blog with projects and feedback.
    Since May 30, 2014 I am waiting for Microsoft fix
    these 2 bug. If you know how to speed them up, please help

    I guess another option is to have the users log in with there Microsoft account and add contacts to there Microsoft account with the live sdk

Maybe you are looking for

  • Extracting problem

    I got error when I try to extract sol-8-u5-sparc-v1.zip using winzip 8.0, winrar, and unzip, I try to download again but no luck I got the same error. any hints? for more info here's the error during I extracted the said file USING LINUX: [root@neptu

  • Copy and paste feature request

    Please God... uh, Mr. Jobs, When in text edit mode and while viewing web pages etc., please add a button with a clipboard icon that switches into a text select mode that allows you to drag over text to select as well as double and triple tap sentance

  • Raw Values in all_tab_columns (8i)

    I want to retreive Low_value and High_value from all_tab_columns. These fields use the raw datatype. How do I convert them to a decimal number. I am using Oracle 8i. Thanks, Les Smith

  • Watching movies on my TV from PC

    I have a Toshiba Satelite  PSAFGU-020002PC thats been updated to a WIndows 7 We are trying watch the movies from our PC to TV  Inpaticular the new Rainierland website that streams new movies I bought an new Monster HDMI cable and AUVO USB to HDMI Ada

  • In future, batches are to be managed uniquely at client level

    hi frds, while doing goods issue and intial stock posting. i am getting this message.how to clear this.kidly give your suggestions. regards, william