Adding a local site to Dreamweaver CC that is through a mapped network drive breaks ALL connections

I am using Dreamweaver CC on Windows 8 on a machine that is hooked up to a local network. My site files are stored on another drive on that network and I am mapped to that drive. I have always been able to open in individual file from that drive in Dreamweaver. But I noticed that with one site I am working on, Dreamweaver would hang trying to make minor revisions to the PHP code. It was suggested to me to add the whole folder as a local site in Dreamweaver, so I did. At first I thought it was moving along much better -- no hanging while I was typing code. Then suddenly I realized I could not save the files. I was no longer connected to the drive I was working on. Even outside of Dreamweaver, I was unable to access the drive. I thought it was a network issue. I rebooted the computer and opened a Windows Explorer folder and was able to access the drive. Then I opened Dreamweaver again and the connection was lost.
To test my theory, I rebooted again, accessed the drive, waited a little while, accessed the drive, then opened Dreamweaver and it was lost. I tried this several times, each with the same result.
Then I went into Dreamweaver, removed the site from Dreamweaver and rebooted. I accessed the drive, opened Dreamweaver, and voila... I could still access the drive. So I tried adding the site back to Dreamweaver and I cannot access the drive after opening Dreamweaver again.
Without having the site in Dreamweaver, the files/Dreamweaver hangs EVERY TIME I TYPE CODE. Adding a site on a mapped local network drive BREAKS MY CONNECTION and disables my ability to work on the files. Is there a reason for this and more importantly, is there a fix? It seems like a very specific but illogical problem.
My next step is to find and install my old Homesite 4.5.
Thanks in advance for any useful advice!

mpendill wrote:
I surely did not knowing change anything within the software!
I just tried adding another site. It seems like it is setting it up and reading the files but then at the end (apparently just as the connection breaks), it gives me these errors:
Cannot create [SITE NAME].
and
The local root folder, [FOLDER NAME], does not exist. Please select a new local root folder by clicking the Manage Sites button.
(I changed the out the actual site name and folder name above.)
I believe these were the same errors I got with the other site. At the time I was pushing a deadline and was too frantic to write it down.
Not that I think it has any relevance, but both sites are Wordpress sites.
Maybe what I should try next is mapping a different drive and trying to set up a site from there?
For that error you want you can try mapping it but it seems your sites root is just not defined... what DW is telling you is it could not find the specified folder when its trying to establish the new site. You might want to make sure your folder is there and all the spelling is correct, when making sure go your your Site Manager and make sure your root site is in your network drive.

Similar Messages

  • How can we access a file that is on a mapped network drive.

    If I have a network drive that is password protected and is already mapped on a server(x.x.x.x) as R drive. And I have file called temp.txt on R:\Temp folder on the mapped network drive.
    How can I access it using file: using a client application running on that server.
    Thanks.

    ag2007 wrote:
    When I use it the above way I am getting the following exception:
    java.io.FileNotFoundException: \\network\share\Temp\temp.txt (Logon failure: unknown username or bad password).
    From the above I can say that I need to specify the username and password.
    Now my question is how do I specify the username and password in the URI?
    Thanks for the help.You don't. It is required that the user account running the code already has permissions to the directory in the first place.

  • *** Example of JSF Image servlet that can write image to network drive ??

    Hi Guys,
    Does anyone have an example of a of JSF Image servlet that can Write image to network drive ??
    I can write an image to my local drive on my tomcat app server. But when I try to map to a network drive with IP or Mapped drive it fails.
    Any help out there ??
    Thanks
    Phil

    Hi,
    The drive I am trying to access is on a box 45.65.111.115 ip
    I have mapped the box and drive to M:
    Setting sharing on...
    I have tried a few new ways...
    imageDrive2=M:\\test_images\\
    gives this errror
                java.io.FileNotFoundException: M:\test_images\first250k\16Sep0857_Phil_Tucson.JPG (The system cannot find the path specified)
         at java.io.RandomAccessFile.open(Native Method)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
         at javax.imageio.stream.FileImageOutputStream.<init>(FileImageOutputStream.java:44)=============================================
    imageDrive3=\\\\45.65.111.115\\first250k\\test3.jpg
    gives this errror
    java.io.FileNotFoundException: \\45.65.111.115\first250k\test3.jpg (Access is denied)
         at java.io.RandomAccessFile.open(Native Method)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
         at javax.imageio.stream.FileImageOutputStream.<init>(FileImageOutputStream.java:44)
         at com.sun.imageio.spi.FileImageOutputStreamSpi.createOutputStreamInstance(FileImageOutputStreamSpi.java:37)========================================================
    imageDrive4=\\\\45.73.111.115\\test_images\\test4.jpg
    gives this errror
    java.io.FileNotFoundException: \\45.73.111.115\test_images\test4.jpg (Access is denied)
         at java.io.RandomAccessFile.open(Native Method)
         at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
         at javax.imageio.stream.FileImageOutputStream.<init>(FileImageOutputStream.java:44)
         at com.sun.imageio.spi.FileImageOutputStreamSpi.createOutputStreamInstance(FileImageOutputStreamSpi.java:37)
         at javax.imageio.ImageIO.createImageOutputStream(ImageIO.java:391)
         at javax.imageio.ImageIO.write(ImageIO.java:1483)=============================================================================
    Any help out there??
    Phil

  • Can't map network drive - Network Error 0x800704cf I've tried EVERYTHING (that I can think of)

    I've had this issue for months now but I really can't take it anymore, I NEED to be able to map a shared drive (I have all privileges for it) and every time I try I get an error code 0x800704cf, my computer has been formatted 4 times and after that
    I works for about a month and then it goes back to the same crap,
    I've tried different suggestions that I have found, most common one if from 
    http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/cant-map-network-drive-network-error-0x800704cf/b1d0eb44-9634-4108-a0af-8f3dea98314d
    where client for Microsoft networks" and "file and printer sharing have to both be checked, our IT team has tried plenty of times but
    they have NO IDEA what is the root cause, and they just go for the formatting but I can't have that anymore.
    When I try in another machine I am able to access with no problems at all..so I know its not my credentials.
    All hardware has been checked as well as replaced for other known to be working ones.
    PLEASE I NEED HELP

    are you on the internet or a local share
    Windows 8.1 has better sharing that works properly, I have seen issues with Windows 7, which prompted me to use a server to handle to problem
    make sure there is only 1 network adapter in each machine (active)
    Corsair Carbide 300R with window
    Corsair TX850V2 70A@12V
    Asus M5A99FX PRO R2.0 CFX/SLI
    AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
    G.SKILL RipjawsX DDR3-2133 8 GB
    EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
    Asus PA238QR IPS LED HDMI DP 1080p
    ST2000DM001 & Windows 8.1 Enterprise x64
    Microsoft Wireless Desktop 2000
    Wacom Bamboo CHT470M
    Place your rig specifics into your signature like I have, makes it 100x easier to understand!
    Hardcore Games Legendary is the Only Way to Play!

  • HT4199 i resenty up dated my iphone 5, now my phone will not connect to my home network. my kids phones, laptops and macs all connnect to my home network. i have an hotspot router it connects to that but not my homes network, i reset all network setting,

    l resently up dated my iphone 5 and now it want connect to my homes network, i have a hotspot router that it connects fine to. all other devisers connect to the home network, l reset all network setting and reentered password (password is correct) and still no go. whats up with this. Thank Mike

    It's possible your wi-fi router needs to be reset, or the firmware needs to be updated.
    Follow the steps in this article: iOS: Troubleshooting Wi-Fi networks and connections - http://support.apple.com/kb/ts1398

  • Linux users cannot open Firefox on multiple systems that are mounting the same network drive as their home directory

    I am supporting a user who is logging into multiple linux systems that all have the same /home directory mounted to a network filer.
    When the user opens firefox on one system, he is unable to open firefox on other systems.
    I'm assuming this is because firefox is storing his profile in /home.
    These are Centos 5.4 x64 systems, authenticatiing to a Windows 2003 Domain. The filer that hosts the home directories is a NetApp with both CIFS and NFS permissions enabled on the volume that /home resides. We are using the version that came with the Centos installation, 3.0.12

    So while this worked well for my computer at home, it does not work for the actual computer the disk is mounted on.  If I try to mount the disk as the "office" user, the computer rejects the connection to itself and tells me to access it locally.  Any ideas on how to handle this?  Thanks again.
    dlr

  • How do I make a wired connection to my Airport Extreme that will share the same network as any wireless connection to it?

    Here's the set up.
    I have a cable router into the house and then an Airport Extreme connected to it. Everything connects wirelessly to the Airport Extreme apart from one computer in the same room as it, which I wired into the AE with a cable (it's a gaming PC and has no wireless).
    How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.

    There is nothing stopping you connecting to the wireless computers if you have sharing turned on..
    How can I get that wired machine to use the same network as all the other wireless devices? When I plug the cable into it, the gaming PC only picks up the network being created by the cable box which I don't use.
    I don't quite follow this..
    If the cable modem is a router.. the AE must be in bridge mode..
    So all routing is handled by the cable modem router.. and the wireless clients will all be in the same IP range as the PC is.. please check that by opening the PC command window and type ipconfig /all
    Then go to one of the wireless devices and check that it also has the same IP range.. eg,, 192.168.x.x and same router or gateway address eg 192.168.1.1 and same DNS.. which is the same as the router address..
    Then in the command window of the PC use the command ping to see if the other devices respond.. ping it by name or by IPaddress.
    If there is no response.. windows has decided it is in a public network.. and slammed up the firewalls.. make sure your network is set as home for location.. and make sure the firewalls .. you can have multiple if you have an internet security  package are not blocking local network access.
    Also remember PC and Mac in a network can take a bit of fiddling to see each other. But ping should always respond and in both directions.

  • Renamed Macintosh HD now Dreamweaver can't preview local files in Web Browser even though I have redefined local sites

    I've renamed my Macintosh HD on my Macbook something else-and
    then went in and redefined all the local sites in Dreamweaver CS3
    with the new name. Dreamweaver locates all the local files and
    allows me to edit and work on them-but then when I save and preview
    it can't locate the files. I've changed the name of my hard drive
    back to Macintosh HD and still the same problem. I'm completely
    stuck and this is frustrating the hell out of me-what do I
    do?

    If it is during the preview, check the test server
    information in the site settings.

  • How to access a remote site in dreamweaver

    This might seem like a simple question, but i just downloaded DW as a trial, and want to try it out before buying. Now I've done the remote site set up and tested and it says it can connect to my remote site. But I want to now go to the site, log in, and make some changes to the web site pages which are stored there. None of the stuff is stored on my home PC. It's all at the remote site. So how do I edit it? How do I even log in? DW seems intended to work on files on your home PC, and then publish them to a remote site. My problem is it's all ON the remote site.

    Hi Nancy,
    No, I'm not getting those selections under the file menu. What I've done is go to server, manage servers, and set up a remote server. When I test it it says "dreamweaver connected to your web server succesfully". So I assume that the remote server, at least, is set up properly. I didn't set up a "local site" however. Perhaps that could be it? But those choices are not on the drop-down box, even grayed out. If I click on "open" the box goes to my PC for choices. On the left side it has" My recent documents, desktop, my documents, my network (which doesn't lead anywhere)

  • Testing a local site in a browser

    Hello,
    I've defined a local site in dreamweaver CS3. I see correctly
    my html pages in the design view of DW, it finds all the local
    links, applys CSS styles (from an external style sheets that is on
    the same folder of the hml file).
    The problem comes when I want to test it with browsers
    (Firefox and IE7) [F12], links and style sheets doesn't work any
    more. I don't know what I can do to see my local site and my remote
    site identically. Maybe I have to modify something in the 'hosts'
    file of my computer?
    Many thanks for any help.
    Geoffrey

    You are being confused by a) not understanding root relative
    vs document
    relative links, and b) not understanding how DW previews
    files.
    If I have a document with a link to an image that looks like
    this -
    <img src="/images/foo.gif"...
    That's what's called a root relative link.
    If I preview that document in DW, then the browser gets the
    document, sees
    the leading "/" and reads that as the root of the hard drive,
    since the
    browser has no idea where the root of the site is. Thus, the
    image is
    broken in the preview.
    If I have temp files enabled, then DW will secretly convert
    the file being
    previewed into a temporary file, and hand that to the
    browser. This temp
    file has had all root relative links converted to document
    relative links
    (as you will see by looking at the code in the browser), and
    has had all
    include files actually embedded in the page, and has had all
    external CSS
    and js markup embedded in the page. In other words, DW has
    made the
    document into a stand-alone page.
    If you do not have temp files enabled, all of these links
    would be broken on
    preview.
    Now - if you are using root relative links, AND you have temp
    files enabled,
    AND you click away from the previewed document, then all of
    your links will
    be broken, since DW has not made that linked file into a temp
    file. This is
    what you are seeing.
    So - if you want to click away on preview, then you must use
    document
    relative links for the site -
    <img src="../images/foo.gif"... (for example)
    These will still work on preview since the browser knows how
    to determine
    the current file's location and how to follow that path.
    GEDDIT?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "geoffreymazuy" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hello,
    > I've defined a local site in dreamweaver CS3. I see
    correctly my html
    > pages in
    > the design view of DW, it finds all the local links,
    applys CSS styles
    > (from an
    > external style sheets that is on the same folder of the
    hml file).
    > The problem comes when I want to test it with browsers
    (Firefox and IE7)
    > [F12], links and style sheets doesn't work any more. I
    don't know what I
    > can do
    > to see my local site and my remote site identically.
    Maybe I have to
    > modify
    > something in the 'hosts' file of my computer?
    > Many thanks for any help.
    > Geoffrey
    >

  • Use Offsite Dev Server As Local Site In DW CS5?

    I have been assigned the task of updating files from a 3rd party, offsite server, to our in-house live server. My question is this, is there a way to set the offsite server directory, (of which I have to login to with user name and password), as my local site in Dreamweaver CS5? I would like to do it this way in the hopes that DW's synchronization will help me keep the newest files up to date on the live server.
    Currently the process works as follows: A 3rd party updates pages for our site and uploads them to the offsite development server. The updated files are then downloaded to a local directory onsite. Then the local files are uploaded to our live server. I would like to set it up so I can simply synchronize the offsite dev server with our live server through DW. Basically, mirror the two servers in DW.
    Any ideas? Can DW do this?
    Thanks.

    DW could only do that if you can map that offsite server to your computer.
    Why not do it this way?
    1.  Set up a site with your local site as usual and the remote site on the 3rd party server.  You would downsynch to grab the changed files.
    2.  Define a second server for this site to be the remote production server.  You would then switch to this remote server, and upsynch.
    It's still a few steps but it's not too bad.  It's all done within that single site definition.

  • "Cannot connect to server" error when setting up MAMP local server in Dreamweaver cc 2014

    I am trying to set up my Wordpress 4.1 site with MAMP 3.0.7.3 in Dreamweaver cc 2014, but I am getting a "Cannot connect to server" error when trying to view the site live. The site works fine on the localhost:8888. I am using OS X Yosemite and PHP 5.6.2. Below are screenshots of my Dreamweaver settings. Thanks in advance.

    Hi Subhadeep!
    Think I'm getting closer (Lol). I did as you suggested and changed the web url to http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings.
    http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings. Thank you!

  • Embeding lightroom web site into dreamweaver?

    I've created a website in dreamweaver and currently have links to different lightroom web pages. www.owendawsonphotography.com. An annoying problem with this method is having to back click through lighroom to get to your home page. Being new to the web design program is there a way to embed the sites into dreamweaver so that you have the ability to set up a home button on each of the LR sites? I'm guessing not, but just thought I'd ask. Thanks, Owen

    You could use the Contact field to point back to your home page, and have a contact point there rather than all over the LR galleries. Also, if you use the Identity plate I believe you could put in a link to your home page. There's also LR galleries at http://theturninggate.net and other sites, and likely other solutions that hopefully others will offer.

  • Beding lightroom web site into dreamweaver?

    Topic
    Embeding lightroom web site into dreamweaver?
    I've created a website in dreamweaver and currently have
    links to different lightroom web pages.
    www.owendawsonphotography.com. An annoying problem with this method
    is having to back click through lighroom to get to your home page.
    Being new to the web design program is there a way to embed the
    sites into dreamweaver so that you have the ability to set up a
    home button on each of the LR sites? I'm guessing not, but just
    thought I'd ask. Thanks, Owen

    Add target="_blank" to your links
    <a href="PANOS/index.html" class="style11"
    target="_blank">
    "owenpga" <[email protected]> wrote in
    message
    news:frltds$j6l$[email protected]..
    >
    >
    > Topic
    >
    > Embeding lightroom web site into dreamweaver?
    >
    >
    > I've created a website in dreamweaver and currently have
    links to
    > different
    > lightroom web pages. www.owendawsonphotography.com. An
    annoying problem
    > with
    > this method is having to back click through lighroom to
    get to your home
    > page.
    > Being new to the web design program is there a way to
    embed the sites into
    > dreamweaver so that you have the ability to set up a
    home button on each
    > of the
    > LR sites? I'm guessing not, but just thought I'd ask.
    Thanks, Owen
    >

  • Requirement is to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a windows service, which will be created by command: - net use z: \\servername\sharedfolder /persistent:yes

    Environment:
    OS:  Windows 7 32/64 bit, Windows 2008 Server 64
    bit/ Windows 2012 Server 64 bit
    Priority:
    - Critical
    Requirement: - Since
    the Windows Service is running under the Local System Account, we would like to emulate this same behaviour.
    Basically, we would like to run CMD.EXE under the Local System Account. So that we can map a network drive to be used by a service using following
    command
    net use z: \\servername\sharedfolder /persistent:yes.
    Already Attempt:
    We tried to launch the CMD.exe using the DOS Task Scheduler AT command.  Here’s a sample command:
    AT 10:36 /interactive cmd.exe
    But I received a warning that “due
    to security enhancements, this task will run at the time excepted but not interactively.”
    It turns out that this approach will work for XP, 2000 and Server 2003 but due to session isolation
    Interactive services no longer work on Windows 7, Windows Server 2008 and above.
      2.  We
    tried to create a secondary Windows Service via the Service Control (sc.exe) which merely launches CMD.exe.
    <Drive>:\sc create RunCMDAsLSA binpath= "cmd" type=own type=interact <Drive>:\sc
    start RunCMDAsLSA
    In this case the service fails to start and results it the following error message:
    FAILED 1053: The service did not respond to the start or control request in a timely fashion.
      3. One
    suggestion, we found to launch CMD.exe via a Scheduled Task, but
    it is not giving any option to launch CMD.exe in interactive mode; so that I can map network drive using net command.
      4. I read an article, which
    demonstrates the use of PSTools from SysInternals. I launched the command line and executed following command
    psexec -i -s cmd.exe
    PSTools worked fine, but It seems that in scope of Sysinternals Software License
    Terms. You may not "use the software for commercial software hosting services."
    Application will deploy on client, which will be like commercial,
    so we are not able to use PSTools.         
    Kindly assist us for achieving the requirement. We have tried all the ways, but nothing is working for us. Kindly suggest.
    I will be really thankful.

    Hi Sir,
    Nothing worked from above for us. You can see our remarks on posted query.
    That’s why, we posted on forum.
    And there will not be any vulnerability, because, if we will use "net
    use ..."
    in network domain; definitely,
    we will provide username and password of mapped drive system.
    And, that system, itself is given by client; so that, there must not be any vulnerability; they are ready to provide user name and password.
    We need a way; by which we can complete the requirement. Kindly assist.
    Regards,
    S. P. Singh

Maybe you are looking for