*** Example of JSF Image servlet that can write image to network drive ??

Hi Guys,
Does anyone have an example of a of JSF Image servlet that can Write image to network drive ??
I can write an image to my local drive on my tomcat app server. But when I try to map to a network drive with IP or Mapped drive it fails.
Any help out there ??
Thanks
Phil

Hi,
The drive I am trying to access is on a box 45.65.111.115 ip
I have mapped the box and drive to M:
Setting sharing on...
I have tried a few new ways...
imageDrive2=M:\\test_images\\
gives this errror
            java.io.FileNotFoundException: M:\test_images\first250k\16Sep0857_Phil_Tucson.JPG (The system cannot find the path specified)
     at java.io.RandomAccessFile.open(Native Method)
     at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
     at javax.imageio.stream.FileImageOutputStream.<init>(FileImageOutputStream.java:44)=============================================
imageDrive3=\\\\45.65.111.115\\first250k\\test3.jpg
gives this errror
java.io.FileNotFoundException: \\45.65.111.115\first250k\test3.jpg (Access is denied)
     at java.io.RandomAccessFile.open(Native Method)
     at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
     at javax.imageio.stream.FileImageOutputStream.<init>(FileImageOutputStream.java:44)
     at com.sun.imageio.spi.FileImageOutputStreamSpi.createOutputStreamInstance(FileImageOutputStreamSpi.java:37)========================================================
imageDrive4=\\\\45.73.111.115\\test_images\\test4.jpg
gives this errror
java.io.FileNotFoundException: \\45.73.111.115\test_images\test4.jpg (Access is denied)
     at java.io.RandomAccessFile.open(Native Method)
     at java.io.RandomAccessFile.<init>(RandomAccessFile.java:212)
     at javax.imageio.stream.FileImageOutputStream.<init>(FileImageOutputStream.java:44)
     at com.sun.imageio.spi.FileImageOutputStreamSpi.createOutputStreamInstance(FileImageOutputStreamSpi.java:37)
     at javax.imageio.ImageIO.createImageOutputStream(ImageIO.java:391)
     at javax.imageio.ImageIO.write(ImageIO.java:1483)=============================================================================
Any help out there??
Phil

Similar Messages

I need a script that can save images in whatever directory they reside in

I am working on a project where I have over 1500 directories that have multiple .TIF images in each one. I am looking for a solution where I can run a script (which may or may not call on actions) that allows me to save each .TIF as a .PSD and again as a .PNG (with specific optimization settings) in the same directory as the original .TIF. The main idea here is I need to be able to run the script and walk away. So I'm looking for a one press option for each directory.
I can create an action that saves the files in the proper format but when I record the action it saves the file in "folder 1". When I run this action again on "folder 2" it saves the images in "folder 1." I could certainly make adjustments in the "Batch" dialog box by choosing the over ride "save as" function but the goal is to not have to do that 1500 times.
So, my question is, is there a single script out there that can save images next to the original .TIFFS regardless of what directory the reside in? I'm no scripting guru, but perhaps the code uses something with a "this" command to specify the folder to save images to? Is this even possible? If so, are there web sites I can buy this from? Is there a scripting community that can provide these services?
Any help to point me in the right direction is much appreciated.
Mike

You could try my Picture Processor ...
http://www.ps-scripts.com/bb/viewtopic.php?f=10&t=3409&sid=3925f7039423a428ed082feba2c0aee 9
Use the second download.

I can't map a network drive from Windows 7, using the exact same settings that work fine with Vista or XP

I have Windows 7 64 bit Home Premium,and I can't map a network drive. I use a Cisco VPN client to connect to my University network, and then when I go to map the drive I get a message that it can't be found. I have done web research it seems that I am unable to edit the local security settings (apparently you can do this in Ultimate and Professional versions), and that this may be the culprit. Does Microsoft make some patch available? My IT people, and the tech help at HP are baffled by this. If Windows 7 Home Premium does not allow for mapping of network drives, then I'm dumping it and returning to Vista. Has anybody had similar problems?

Day 2 of trying to map a drive in Windows 7 Professional:
My journey to ____..
Begins:
I purchased Windows 7 Home 3xuser license pack for ~140 US I kep hearing friend sayhow much faster it was than Vista 32bit so I thought hey let’s “upgrade”
.. I looked up the definition of the word “upgrade” the following is what I found:
1.
To exchange a possession for one of greater value or quality; trade up.
2.
Computer Science
To replace software or hardware with an upgrade.
3.
Computer Science
a.
To replace (a software program) with a more recently released, enhanced version.
b.
To replace (a hardware device) with one that provides better performance.
So we,re all clear on what an upgrade is suppose to be. I wanted tomake sure I understood before I proceeded.
I installed a copy on my latptop Toshiba Centrino 1.83 Ghz/3 G Ram decent computer for all intent and purposes. It’s been working fine
on Vista but running slow. So I went through MS “requirements checking” to determine if my computer passed the MS test and worth of such the honor and also get MS’s blessing before I moved forward with the “upgrade”.
I proceeded with the upgrade went relatively smoothly had to uninstall a few programs but I figure that’s such a
small price to pay for such great enhancement that I will receive from my “upgrade”. Approximately 4 to 5 hours later after minimal reboots I was all set to go with my new upgraded OS. It was working as prescribed faster than Vista cleaner
interface sorta, helpful little taskbar gadgets. I was stoked that night I went to be thinking I will go to work and be a rock star on my brand newly “upgraded” computer.
Oh and by the way, I was so thrilled about Windows 7 I even upgrade my home computer as well.
I go into work and I have a very big user migration that night, I am an network engineer and I use my laptop for work I use Visio, Wireshark
and others, all the tools that help us do our job efficiently and effectively.
I sit down turn on my computer it boots faster than Vista and I’m just chomping at the bit to get going have lots of work to do. So let
go back for a minute an look at the definition of “upgrade”
“3.
Computer Science
a.
To replace (a software program) with a more recently released,
enhanced version.
b.
To replace (a hardware device) with one that provides
better performance.”
So were good on what upgrade is?
I have my computer up I have logged in (locally) not on a domain as I was not when I was on Vista OS. I wanted to attach the server to get some
files so I go to map a drive………………. Hmmmph ….. that’s weird I cannot map a drive …… let’s try this again……… hmmmph…. what this domain thing going here I
never need that before in the lesser product Vista but ok I’ll add my
\\servername\folder and my domain.org\username..... hit enter and hmmmmmph …. It ask me for my password again.. well I could have fat gingered it so I’ll type it in reallllllllly slow.. hmmmmmmph ….. again no such luck…
So I decide consult a colleague of mine who recommended I “upgrade” to Windows 7. After speaking with me he tells me oh! You need
Windows 7 Professional to do the same things you did in Vista home … I’m perplexed by this but let’s once more take a look at the word “upgrade” to “enhance
and/or make better
”. So now I’m a little perturbed by this little bit of information but I suck it up and decide I’ll drop another ~100.00 US on an “upgrade” to Professional small price to pay for such a great product.. I mean have
you seen those commercial WOW!
I make my purchase download and once “upgrade” to new “upgrade” with even more improvement over Vista and XP I mean
with those two OS’s it took me all of 5 second to map a drive SURELY Windows 7 Professional will map a drive like no one business.
After
few reboots my computer has been fully “upgraded” and ‘upgrade” again to W7 Pro and I’m off to the races ready to get to work cause my migration will be starting in a few hours and I want to be prepared. Sytsem reboots quickly
I’m logged and ready to start getting my information I so desperately need. I go to map my drive I figure I’ll help W7Pro out I’ll be proactive and use “domain.org\username” that way W7Pro
will like me and think oh! this man is brilliant. I hit enter with my correct password that I type realllllly slow. …… waited it’s thinking for sure this is it .. the anticipation is killing me the excitement is overwhelming …….
THUD my world just came crashing down ..no luck .. no login ..no mapping drives…I’m now on hour 6 of this ridiculous journey to the “upgrade” to “upgrade” ____. So now I’m left to forum because MS surely does not
think I am going to pay them $275.00 and hour for support on something that should have work right out of the box.
So I’m on day to I have tried everything on this forum page to get my mapped drive to work with nothing working for me. It appears that
if I want to use my computer I will have to rolled back to the lesser (Vista).
Just in case you’re wondering how I made it through the user migration. I had my co-worker bring me my XP computer worked like it’s
was suppose to.

I can not map a network drive in window 8.1 under VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd , net use /delete and then try to reconnect test-server
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server are window server 2008 r2 and server 2012, they located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC( Intel Lan 82579LM/V Driver)
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

I can not map a network drive in window 8.1 via VPN

Dear sir / madam,
I face a big problem. My company use VPN Connection. After my company upgrade the window from Window 7 to Window8.1 , we find that we can not reconnect the network drive. please find the details below:
1. I success to map drive and then logout / switch user.
2. wait two /three hours
3. i find the drive is disconnected.
4. when I try to reconnect, window can not find again. then I try to use netstat
C:\Windows\system32>netstat
TCP 172.28.97.31:58206 test-server:http TIME_WAIT
Then, i try to use cmd
5 it show reconnect successful by net use command. However , I need waste many time and I can not find the drive in window.
if I restart window, i can reconnect it quickly and find the drive in window.
the server is window server 2008 r2 and located at difference site.
if the server and PC located at same site, it is no problem.
both the server and PC are joined in same domain.
it is dell server and Lenovo M82 PC
please help me to solve the problem
(window 7 also have this problem. However, i can click the drive and it can reconnect quictly.i cannot do this in window 8.1.......it loop again)
thanks

Hi,
Is there any error message throwed when you reconnect the mapped drive? Can you directly access the UNC path of the mapped drive? What VPN programs do you use? Please check if the VPN client connect correctly.
You could refer to the thread below to check if the AD account is restricted by VPN.
Can't access mapped drives through VPN when away from office
http://social.technet.microsoft.com/Forums/windows/en-US/a0ca41aa-08b8-4e46-a314-ffb7e401bd7a/cant-access-mapped-drives-through-vpn-when-away-from-office?forum=w7itpronetworking
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

How do I load a picture from the clipboard (either Windows clipboard or Labview clipboard) into image data that can then be processed in Labview?

I want to load a picture from the Windows clipboard (and if not possible, then from the Labview clipboard) into actual numerical image data so that it can be processed in lab view. When I'm at the main screen where I can add controls, I see a section of controls called "Vision" in the tool bar where all the different controls can can be added from. When I go to the control called "Image" and put that on my form, and then look at the flowchart/blockdiagram programing window to see what inputs and outputs it has, I only see one output, and no inputs. And when I right click on it, I see NO way to load an image into the Image control. PLEASE help me.
Message Edited by Ben321 on 11-09-2008 04:32 PM

Hi Ben,
National Instruments has an image processing software called Vision and although I am not completely sure, I think the controls that you found in the control pallet are used in conjunction with the software. Depending on what kind of image processing you want to conduct in LabVIEW, you might want to consider purchasing that product.
If cost is an issue, there are functions in LabVIEW which allows you to take in image files and process them. However, please keep in mind that the capabilities are limited.
Images should be loaded onto LabVIEW not via the clipboard but through loading it from folders or directories. (There might be a way to and so if you find a way please let me know! I would like to know myself =D) If you open the function pallet by right clicking on the block diagram, in the programming folder you should find a directory called "Graphic and Sound". There, you'll find functions in which allows you to process images.
In the "Graphic Type" directory there should be a function called Read JPEG file.vi. There are also others which allows you to read png and bmp files. Please note that there are functions which write as well. Set a file path on the block diagram and inside the "Grahic and Sound" there is a "Picture Function" directory and inside there, there should be a function called "Draw Flattened Pixmap.vi" That changes the image into a format where you can process on LabVIEW. Inside the "Picture Function" directory there are several functions which allows you to process the specified image. Play around with it and see how it goes. And don't forget to Write the file in the end to save any changes.
I hope this helps
National Instruments Japan
Applications Engineer Taiki Hoshi

Image formats that can be used directly in PDF

Hi,
after severel hours of searching google, discussion boards and the PDF reference, I could not find an answer, so hopefully you guys can help me .
I have written my own little PDF exporter and want to include images. I figured out to include jpegs directly, with the DCTDecode filter.
Are there other image formats, which can be included in PDF directly?
I read somewhere, that GIFs - for example - has to be parsed to get the pixel data and than must be compressed again to be inserted in the PDF file. Therefore it would be easier for me to convert GIF to JPEG with an external program and then insert the JPEG into the PDF. Or is there an advantage, to include the GIF like described above?
What about BMP, TIFF and other image formats?
Is it possible to insert image files lossless into PDF?
I know, lots of questions but i would be really glad if someone can help me .
Thanks in advance,
Regards, Maecky

Hi,
thanks for your answer.
What exactly do you mean with "unwrap"? Should i just get the data without header of the image file and put it into the pdf stream? Otherwise i would have to decompress the format, or am I wrong?
Thanks,
kind regards, maecky

Any updated JRC for Java 1.3 that can fix "Image swapping in PDF" issue?

Hi:
We are using Crystal Report XI release 1 on Websphere server 5.0 with Java version 1.3. Currently we are suffering from the problem that the wrong pictures are on the wrong places in the generated PDF document. The images are mixed up with other images in the report.
It is said that the updated JRC files in CR4E 2.0 can fix this issue. I downloaded the JARs but unfortunately the Java version in these updated JRC JARs is higher than Java version 1.3.
Could you please tell me is there any JAR that can not only solve the mentioned issue but also work with Java version 1.3?
If yes could you please give me a URL link? If no could you please answer no so that I don't put more effort on this issue?
Thanks a lot!!
Ying

Hi Ying,
Unfortunately CR XI is past it's end of life and CR XI R2 and CR4E 2.0 requires java 1.4.
Only option is to upgrade.
Thank you
Don

How can we access a file that is on a mapped network drive.

If I have a network drive that is password protected and is already mapped on a server(x.x.x.x) as R drive. And I have file called temp.txt on R:\Temp folder on the mapped network drive.
How can I access it using file: using a client application running on that server.
Thanks.

ag2007 wrote:
When I use it the above way I am getting the following exception:
java.io.FileNotFoundException: \\network\share\Temp\temp.txt (Logon failure: unknown username or bad password).
From the above I can say that I need to specify the username and password.
Now my question is how do I specify the username and password in the URI?
Thanks for the help.You don't. It is required that the user account running the code already has permissions to the directory in the first place.

How can I map a network drive so that it is persistent?

When I use my PB at work, I need to connect to a network drive. Is there a way to map to this drive sutomatically when I boot up at work but not give me any problems when I boot up at home.

Are you connecting to a Windows-based network drive? If so, I can't remember the exact procedure because I've found it actually more difficult to "map to network drive" with PCs.
For the Mac, what I've done is, to save headaches, is made a shortcut to my networked drive on my Dock.
First, in the File menu:
GO > Connect to Server > Browse > (find your networked drive)
Second, double click on your choice, and what should come up is a new dialog box that says "Connect to Server" with the choice to connect as "Guest" or "Registered User."
Choose "Registered User" type in your login name and password, and click the checkbox for "Remember password in keychain" and then click on the CONNECT button.
Third, if successful, when the drive mounts, drag that to your dock and leave it there.
Then you can access your networked drive any time without having to re-enter your name and password every time. So as long as you did it right.
I don't recommend putting it in your Login Items because it can cause system hangups if for some reason, you aren't connected to your network when you startup. It will hang and search for that drive forever. ("Forever").
Trust me on that part. I've wasted precious time in most cases, waiting for the PowerBook to search for a drive that is not connected.
Also, you can put your networked drive in your "Favorite Servers" section by clicking on the "+" sign with the drive's address typed in. That way you also don't have to find it all the time.
But do the previous tip and you should be fine.
That is, if you are on a Mac to Mac network. I gave up trying to access the PC network because it kept reassigning the IP address and would never remember where it was.
(That's how I got those hangups at startup).

Can I Use a network drive to work with Mac and Windows?

Is it possible to introduce a network drive which can be accessed by both Mac and PC? I manipulate images in Photoshop on my Mac but the software I use to create slide shows is only available in PC format. This software is used more or less universally in the area of photography I am invo;ved with so changing is not an option. Can anyone advise me please.
TC

Yes sure. Any NAS type drive formatted in any way will work. Both Mac OS X and Windows communicate by Ethernet Packets to a Networked drive and it is up to the NAS device OS to translate those Ethernet Packets to the format used on the drive.
Even if you are using a standard external drive connected to a Router or another computer, which is what a NAS is (A self contained computer with Operating System and hard drives), that router or NAS box does all the translating.

One user can not map a network drive

Hi,
A costumer of mine is trying to map a network drive for an existing user that has always had access to the NSS6000 Network Storage Device. This still works for all other users except this one. It looks like an authentication failure. They connect thru CFIS (which means it's using the active directory).
So far i have troubleshooted the following and ran out of options half an hour ago.
I rebooted the NAS. No luck.
I made a different folder and gave the user access. And tried to connect to that. No luck. (to confirm its not related to the folder security)
I tried to map the drive on a different computer. No luck. (to confirm its not a local computer problem)
I tried to map the drive to another folder on a different server, this worked fine. (to confirm credentials are correct).
I tried to remove the user on the NSS600 and tried to update it. The user reappeared instantly in the user list on the NAS. No luck.
I fear the user table the NSS keeps is corrupted. And i can't find a way to force the NAS to recreate it based on current folder security or active directory users.
Please help, as i am in no mood to reconfigure the entire NAS.
Kind regards,
Tim Sars

Hi,
How did you map the network drive? Manually via GUI? Command? GPP? If you're using one of the above solutions, then try other solutions as a alternative way to check the result.
According to your description, If Windows remains unable to reconnect mapped Network Drive at login, then I would suggest you created a batch file with net use command, use it as an logon script, this provides an alternate way to reconnect drives on
a re-logon.
example
@echo off
net use * /delete /yes
net use x: \\server_name\shared_directory_name
You can find detailed information in the following link
https://helpdesk.egnyte.com/hc/en-us/articles/201638304-Mapping-a-drive-using-a-net-use-command-and-logon-scripts-for-domain-users
http://technet.microsoft.com/en-us/library/bb490717.aspx
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Adding a local site to Dreamweaver CC that is through a mapped network drive breaks ALL connections

I am using Dreamweaver CC on Windows 8 on a machine that is hooked up to a local network. My site files are stored on another drive on that network and I am mapped to that drive. I have always been able to open in individual file from that drive in Dreamweaver. But I noticed that with one site I am working on, Dreamweaver would hang trying to make minor revisions to the PHP code. It was suggested to me to add the whole folder as a local site in Dreamweaver, so I did. At first I thought it was moving along much better -- no hanging while I was typing code. Then suddenly I realized I could not save the files. I was no longer connected to the drive I was working on. Even outside of Dreamweaver, I was unable to access the drive. I thought it was a network issue. I rebooted the computer and opened a Windows Explorer folder and was able to access the drive. Then I opened Dreamweaver again and the connection was lost.
To test my theory, I rebooted again, accessed the drive, waited a little while, accessed the drive, then opened Dreamweaver and it was lost. I tried this several times, each with the same result.
Then I went into Dreamweaver, removed the site from Dreamweaver and rebooted. I accessed the drive, opened Dreamweaver, and voila... I could still access the drive. So I tried adding the site back to Dreamweaver and I cannot access the drive after opening Dreamweaver again.
Without having the site in Dreamweaver, the files/Dreamweaver hangs EVERY TIME I TYPE CODE. Adding a site on a mapped local network drive BREAKS MY CONNECTION and disables my ability to work on the files. Is there a reason for this and more importantly, is there a fix? It seems like a very specific but illogical problem.
My next step is to find and install my old Homesite 4.5.
Thanks in advance for any useful advice!

mpendill wrote:
I surely did not knowing change anything within the software!
I just tried adding another site. It seems like it is setting it up and reading the files but then at the end (apparently just as the connection breaks), it gives me these errors:
Cannot create [SITE NAME].
and
The local root folder, [FOLDER NAME], does not exist. Please select a new local root folder by clicking the Manage Sites button.
(I changed the out the actual site name and folder name above.)
I believe these were the same errors I got with the other site. At the time I was pushing a deadline and was too frantic to write it down.
Not that I think it has any relevance, but both sites are Wordpress sites.
Maybe what I should try next is mapping a different drive and trying to set up a site from there?
For that error you want you can try mapping it but it seems your sites root is just not defined... what DW is telling you is it could not find the specified folder when its trying to establish the new site. You might want to make sure your folder is there and all the spelling is correct, when making sure go your your Site Manager and make sure your root site is in your network drive.

How can I see my network drive from time capsule on windows vista pc?

I connected my Time Capsule 2tb to Windows PC and do not see the Network Drive for TC. I can see TC on my wireless MacProBook, but cannot see TC drive on the pc. What can I do on the PC to find Time Capsule's drive?
Thank you.

From the Mac as it is easier to use.. open airport utilty and go to the disks, file sharing page. turn on the guest account.. give read write access.. and make sure the TC is in the correct workgroup or type in the work group name.. update the TC.
In vista.. Open windows explorer.. in the address bar type \\ip\
IP meaning the IP of the TC. . wait.. waiting wait.. windows scratches its bum.. thinks some more.. will finally kick up a username and password request.. type in whatever you need. Voila.. TC appears.

Trying to install on MacBookPro with Parallels and Windows 8.1. Downloaded the CreativeCloud.exe but says I can't install from network drive

I sometimes like to use Photoshop CC and Lightroom on the Windows side of my MacBookPro with Parallels. I had to reinstall Parallels and also Windows 8.1 recently and am trying to reinstall some of the software that I had previously on the Windows side. I downloaded the CreativeCloud.exe program and when I try to install it from the Windows side, get a message that I can't install Creative Cloud from a network drive. Where can I put the CreativeCloud.exe so I can install it?
Thanks!

You probably need to check your drive setup for the Parallels environment. Nothing to do with Adobe.
Mylenium

*** Example of JSF Image servlet that can write image to network drive ??

Similar Messages

Maybe you are looking for