Adding a user to the File Security Realm

Hello,
When I attempt to add a new user to the file realm with Application Server->Security-Realms->file-> Manage Users, I get the error:
A "com.sun.enterprise.tools.guiframework.exception.FrameworkError" was caught. The message from the exception: "Unable to get View for ViewDescriptor 'fileUsers'"
The root cause is "java.lang.ArrayIndexOutOfBoundsException: 0"
See the HTML source for more detailed (stack trace) information.
When I look at the file C:\Sun\AppServer\domains\samples/config/keyfile I see the new user added, but the Admin Console is not happy...
Please advise.
-- POC

There are some issues in admin gui for managing security service in beta.
I have verified that this has been fixed in FCS branch.
Since the user and password has been written to keyfile in your scenario, it may be OK.
You can try to use the user. If this is not working, then restarting the server should work.
Another way is to create user by using asadmin command. This is working fine in beta.

Similar Messages

SOA EM down after password change - OracleSystemUser is not a valid user principal in the current security realm

Hello,
I've got a SOA Suite development environment set up and whilst trying to change the weblogic password using this tutorial a problem arose with my soa managed server.
Firstly I was unable to start the Managed SOA server due to mismatching passwords, and after I modified the boot.properties file, now I cant start the usermessagingserver and soa_infra applications due to the following error:
Error 1
Getting weblogic deployment manager.
Got weblogic deployment manager.
Invoking Start Up operation.
Start Up operation for application usermessagingserver on target soa_server1 RUNNING.
Start Up operation for application usermessagingserver on target soa_server1 FAILED.
weblogic.application.ModuleException: Exception preparing module: EJBModule(sdpmessagingclient-ejb-parlayx.jar)
Unable to deploy EJB: MessagingClientParlayX from sdpmessagingclient-ejb-parlayx.jar:
The run-as security principal, 'OracleSystemUser', chosen for the EJB 'MessagingClientParlayX(Application: usermessagingserver, EJBComponent: sdpmessagingclient-ejb-parlayx.jar)' is not a valid user principal in the current security realm. Please specify a valid user principal for the EJB to use.
Getting weblogic deployment manager.
Got weblogic deployment manager.
Invoking Start Up operation.
Start Up operation for application soa-infra on target soa_server1 RUNNING.
Start Up operation for application soa-infra on target soa_server1 FAILED.
weblogic.application.ModuleException: Exception preparing module: EJBModule(hw_services_wls_ejb.jar)
Unable to deploy EJB: ASNSInteraction from hw_services_wls_ejb.jar:
The run-as security principal, 'OracleSystemUser', chosen for the EJB 'ASNSInteraction(Application: soa-infra, EJBComponent: hw_services_wls_ejb.jar)' is not a valid user principal in the current security realm. Please specify a valid user principal for the EJB to use.
I've checked both weblogic and OracleSystemUser users and their groups are (respectfully) Administrators and OracleSystemGroup.
I've searched for an answer to this problem and found this other support article but couldn't resolve the issue.
The weblogic server version is 10.3.2.0 and it's running on RedHat Linux.

@Sri_Sonti
In the Admin Console, I can see both users in the security realm with the following configs:
weblogic:
all atributes with the "value" column blank
groups: Administrators
OracleSystemUser
all atributes with the "value" column blank
groups: OracleSystemGroup
Also I have not found the system-jazn-data.xml file you mentioned. In that folder there's only a readme.txt file.
Best Regards,
luismcs
Enter Cookie as format:
(ex: name=val;) separate with ';'
OKCancel

How do I ensure user name is shown rather than 'another user' on the 'File in Use' dialog box?

How can I ensure user names are shown rather than just 'another user' on the 'File in Use' dialog box that appears when attempting to edit a checked out document in Microsoft Word/Excel?
All suggestions welcome.

If I recall correctly, that dialog is generated by the Office client product supporting that file type. There would be no way to modify it.
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How can I login with my admin user after the "file vault-security option" disabled?

My HD was full. So i deleted the biggest files related to file vault. After that i disabled the file vault option in security preferences, and restarted the machine. When i tried to connect again, appear the message"error in file vault". How can i fix?

I have the same problem. My Mac Mini server will not let me reset pram or safemode. Can't login. Help

How to retrieve Global Roles in a the current security realm?

Is there a WLS API available that obtains a list of mapped global roles (defined in a security realm) from an application?
I want to be able to do a getRoles call against an authenticated user. So far, I'm only able to use isUserInRole. What I need is a list of all global roles mapped to a user's group.
Thanks all...
Message was edited by:
raymondng

You can refer to the api
http://e-docs.bea.com/wls/docs81/javadocs/weblogic/management/security/authorization/RoleReaderMBean.html#getRoleExpression
-Ramkumar

Upload file without asking user for the file

Hi,
I need to upload a file to server, but from my code, not using the file upload from page.
I have created a xml file and I need to upload to server when user open a web browser (without asking user to select a file).
How do I proceed??, or what kind of libraries do I must use?
thanks

davisote wrote:
Hi,
thanks for answer.
Let me try to explain again (I think its very simple).Simple, yes. But not very thorough.
I have developed a web application using JSF.So all the code is running on the server, right? There are no Applets, Applications or WebStart applications involved. Right?
My application has a splash screen where I show data. I have developed a bean to connect to my database (sql server), extract this data and create an xml (using DOM) file like:
<news>
<simplenews id="1"> Value </simplenews>
</news>And that bean runs ... where? Server again?
(important step) Once I have created the xml file in my bean I want to upload to the server to a place like /WEB-INF/news.
If the code is running on the server, then "uploading" is the wrong term, as there's nowhere to upload to, since you're already on the server.
This may sound like nit-picking, but you're sending us on a wrong trail with this phrase.
Once the file is on the server with another bean I read the xml fileWhy don't you simply store it in the application scope and let everyone access it from there? It doesn't sound as if the XML is huge.
As you can see I haven't a web page where to show an upload file componetYou also don't want to "upload" anything from the client, from the sound of it.
You simply want to transfer data between to server-side components, if I understood you correctly.

Migration Assistant. extra User, double the files - only 10 GB left on HD

I restored my system after a login "freeze", following an upgrade from Leopard to Snow Leopard. Apple help advised to use Migration Assistant to back up everything from Time Machine. Now I have an extra user ID (as they said I would) but the file structure doubled! This leaves me only 10GB on a 500GB drive - which I read is not good. Do I wipe the drive and start over but instead restore files one by one, or do I delete all the files in the new user ID, or is there some other idea I should consider? It appears there are dups of all the files from user to user, but I fear they are linked and deleting one will delete the other. Help.

Studio B player wrote:
Apple told me to go back to the originally supplied OS X (Leopard 10.5.x), then use the Snow L upgrade disc - is this really required ?
Yes, because your machine came with 10.5, there is a free iLife suit on the 10.5 disks that is not on the 10.6.3 retail disks.
BTW the 10.6.3 disks have the full 10.6 on it too, just no iLife. So you could have installed 10.6.3, Software Updated and installed another iLife if you needed it. A option to keep in mind for the future if the 10.5 disk no longer boots.
Last question ( for now;), what about apps I've downloaded (no disks)?
You need to download new copies from original sources. Your basically rebuilding your machine from the ground up to be reliable. If you have licenses, just email the developer and tell them your TM drive got screwed up, you had to rebuild your machine from scratch and need a new license code.
Programs need to be installed in most cases with the developers installer as they can place files in certain locations on your computer, including copy protection methods etc.
Once you have your brand new pristine system, then clone that to a couple of new blank external drives, date them, leave one as original, the other you set to update by tweaking CCC's settings to clone/backup according to your preferences.
Good Luck.

Excel not letting user save to shared drive, only user using the files, yet it says someone else is using the file.

I have seen this problem discussed before, but have never seen a clear cut solution.
I have a user using Excel 2013. She can create and open files locally, but when she tries to move or save to a shared network drive, she gets the error "Someone else is working in (shared drive/filename) please try again later. She's the only one using
the file most of the time.
I have done a repair on the Office installation, but the user is still having the issue, and I need to remedy this. She has appropriate file/folder permissions on the network. Really stuck on this one.

Hi,
As we know, Office creates TMP files like "$.tmp file" when you open a document. Saving does not delete the files if we still have them open. And this issue occur with network drive not local disk, so
it might be caused with the account permission of the network drive. If your user has no delete permission, the temp file might be not delete after closed the file. Please try to check the permission first.
Then, if there are some mistaken operations when using the files in network drive, we could delete the temp file manually, and then the error would disappear. Please see the similar thread:
https://social.technet.microsoft.com/Forums/office/en-US/63fb4e70-4de7-45c4-a2ca-ff7209687553/excel-file-that-always-shows-a-certain-user-has-it-open?forum=excel#3e0a52bd-3ee9-4dce-8fe3-63a0937c4eed
Hope it's helpful.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

GPO not applying to all users in the same security groups

If Elaine logs in on Angie's PC does it work?

Using Windows Server 2008 R1. I have a single domain with two DCs (both Server 2008 R1). Both DCs seem to be communicating without issues, as changes on one DC are replicating normally to the other for all services.I have a group policy set up to set drive mapping for my users. However when I run the GP modeling wizard only a few of the users receive the proper mappings. In this specific instance I have two users, Elaine and Angie. 1. Both are members of the Domain Users security group and another security group I created called Staff2. Neither user is a member of any other security groups.3. My group policy Security Filtering setting is set to apply the policy ONLY to the Staff security group4. When running the GP Results Wizard, Elaine's computer successfully processes the policy, but Angie's does not, and returns "Access Denied...
This topic first appeared in the Spiceworks Community

Can you notify a user that the file is opened by another user?

Apologies if this is a repeat or redundant question....
Is there a built-in (non-3rd party) way to have a user notified/alerted that the pdf is open by another user when they open the file. I know the lock message pops up when you go to save a file thats opened elsewhere....but the problem is that the users un-aware of this until after they've done a bunch of work.
I perfer not to get into having to password protect the files, etc....just an initial alert is desirable. Any inputs are greatly appreciated.

There isn't such a mechanism in Acrobat/Reader.
On Thu, Jan 29, 2015 at 10:03 PM, stevep40215774 <[email protected]>

How can I protect a PDF file to where when I am editing the file and another user opens the file, it is only a read-only file?

I work for an auditing firm and we have recently gone paperless with our audit documentation. We have our files saved on a server and multiple people can access the same file at one time. We noticed that Acrobat does not give an message notifying a user that someone else is in that file, nor does Acrobat make that PDF file a read only file when someone else is in it editing the document. Is there a way to notify someone that another user is in the same PDF file? Or is there a way to make a PDF read only when someone else is working with the document?

Hi ashleyr1936858
You can restrict editing of a pdf by setting the password, such that anyone who wants to edit the pdf would need to input that password. This would make the pdf a read-only file.
Here's a Link for more information : Acrobat Help | Securing PDFs with passwords
Regards,
Rahul

Where can I disable users in the File Vault Login-Screen?

Hi! I have four users on my mac, but only two should start the mac - where can i disable the others?
Thank you!

I would like to know how to do this also. I have enabled all user accounts to unlock FileVault, but some accounts do not have secure passwords so I would like to disable these.
The only way I can see to do this, is to disable FileVault and then re-enable it with only the accounts I want. Problem with this is it will take a while.
Regards,
Keith.

Can I set up a form so that there is text in the fields when the user opens the file?

My client is interested in supplying schedules of activities in a PDF, and would like it so that a person can use what's in the document, or replace their own information in place of what's supplied.
I've set up forms for filling in blanks, but I've not seen if some text can be left in the fields to start with. For example, leaving a "your name" text line in a field where the user clicks on that phrase and it disappears (like you see in a number of forms on web pages).
Is this possible with Acrobat? If not, we'll probably have to go to a Word based solution, but I'd get better design if I do it in InDesign and add this functionality to a PDF.

George,
Thanks for keeping track of the discussion. I appreciate that you've taken the time to help me. My clients love the fact they can create these curriculum schedules with editable blocks that will allow the original info to return if the block is emptied. Now they'd like book titles italicized.
I downloaded the Javascript reference PDF and found the "richValue" information, but I'm not grasping the concept of how to add it to my page. I'm not Javascript-literate, so I'm more inclined to add HTML tags or something like
and to make something italic.
Here is the example they gave:
Example
Turn all bold text into red underlined text.
// Custom format event for a rich text field.
var spans = event.richValue;
for ( var i = 0; i < spans.length; i++ )
if( spans[i].fontWeight >= 700 )
spans[i].textColor = color.red;
spans[i].fontWeight = 400; // change to default weight
spans[i].underline = true;
event.richValue = spans;
I think I understand the 400 and 700 numbers as font weights, and that "underline" could be replaced with "italic". So I'm trying to figure out what I would need to write in order to make specific words italic in a block of text in the example you provided:
// If field is blank, display this text
if (!event.value) event.value = "Your name here";
Can a span be ID'd by placing a sort of tag around the words? Like... (pardon my fake Javascript)
// If field is blank, display this text
if (words.are) 'i' then italics = true
if (!event.richValue) event.richValue = "Your 'i'name'i' here";
(You're probably laughing at my attempt here, but I hope my point is made :-) ).
David

Getting an error while adding a user to the directory server

Hi !
I am getting an "initOrgAuthLevel iPlanetAMAuthepdAuthService, Service does not exist" error while trying to add a user or a new role to the user through identity server.
Can anybody explain me why?.

It appears to me you are missing some services in AM check the AM startup logs.. you should not see any exceptions. If so, you may have to reinstall the AM.

Is there a API to change user name in portal security realm

Our portal application requires the functionality to change user login name which
maps to the user_name in USER_SECURITY table.
The com.bea.p13n.usermgmt.UserManager does not offer a API to change user name, so
my code changed it directly in the USER_SECURITY table by JDBC.
My concern is : other tables in portal db may also has the user_name which are not
be changed correspondingly, this may cause problem which I don't see now (e.g. Entity
table has user_name also).
Question is: is there a safe way to change user_name consistantly in portal database?
like a API or do I have to do it myself. If it is the second case, what other tables
I need to change.
Thank you for all your input.
Ellen

I also have a similar ?, is changing user name a normal case scenario or a big problem in portal
Please reply

Adding a user to the File Security Realm

Similar Messages

Maybe you are looking for