Adding an already depreciated asset in Fixed Assets module from a manual sy

Guys can someone help me how i can be able to show depreciation for assets that have already depreciated in a manual system.
When am adding assets in the EBS FA module, the module is considering the assets as new and the prorate is depreciating the assets after 6 months as an accounting principle offcourse this is true for new assets.
But in my case the assets are old in my organization, I would like to enter the accumulated depreciation for these assets and there original cost.
Please help me to convince my managers as am the one who recommended for the Oracle EBS Project in my organization.

Hi,
i have posted a fourm with user534587 adding a parameter to existing report in GL module
does any one please help me in this issue its very urgent my client is asking for this report.
i will be very thankful to you .
Regards,
Azeez.
[email protected]

Similar Messages

  • Writeup depreciation asset capitalised from AUC

    Hi
    There are couple of AUC's capitalised and depreciation carried out.
    But the AUC's wrongly capitalised.
    Now I need to writeup the depreciation and decapitalise the asset.
    The process I tried.
    I used t.code ABZU with transaction type "700" then I am getting the error "You cannot post write-ups", but When I am using other asset which is not created from AUC I am not facing this error and Accumulated dep is debited and Depreciation is credited
    Then I made setting and used t.code ABZU with transaction typr "400" then dep value is capitalised to main asset i.e. the entry generating was
    Asset Account              debited
    Decprecation account   credited
    With about Depreciation balance is fine when I look FS10N, But my Accumulated depreciation balance account still holding the balance, now how to reverse the Accumulated Dep account is netted of.
    Please let me know what is the configuration setting I need to carry so that system should generate
    Accumulated dep Account debited and
    Depreciation account is credited
    Regards
    Krishna

    Hi
    if the depreciaiton has been calculated just for open year, you should enter depreciation key 0000.
    Best Regards,
    Blaz.

  • Assets already depreciated

    Hi All,
    Though the problem has raised out of PS but found this is the appropriate group to raise my question. Actually there were a number of assets which were created last year in 2011 through normal acquisitions. Some of these assets already has depreciated values. Now our client wants to post these assets through settlement of WBS i.e. re route through PS.
    What may be the procedure now? I think I may create a new asset for the ones which does not have any depreciation values and assign this to a WBS but what about the ones which already has depreciated values. Can I revert the acquistion? What will be the impact then on accounting of these assets?

    Hi,
    i have posted a fourm with user534587 adding a parameter to existing report in GL module
    does any one please help me in this issue its very urgent my client is asking for this report.
    i will be very thankful to you .
    Regards,
    Azeez.
    [email protected]

  • Calculate Depreciation Forecast for Fixed asset

    Dear all expert,
    I'm new to ASO, would like to know if there's a way to do depreciation forcast for fixed asset in Essbase.
    1. Database type is ASO
    2. Assuming user will prepare forecast caplitialization of fixed asset then upload to Essbase
    3. Attribute dimension "Useful life" has been defined and attached to specific "Accounts" dimension for calcluation
    4. Need to calculate the forecast and spread of depreciation for future months
    E.g. Input 32000 USD for a fixed asset cost with 32 months useful life
    -> should calculate 1000 each month for the coming 32 months
    Can any expert suggest how to do this in ASO? meaning only can do calculation in member formula itself, not calculation script.
    Thanks for your help in advance,
    Billy

    I haven't used the feature, but the reference to 'local script_file' in the MaxL railroad diagram for the 'execute calculation' command suggests the location is relative to the client, if the semantics are consistent with the 'export data' command (the options for report scripts there are 'server' or 'local', although according to the railroad diagram there is no non-local alternative in this case!).
    There is a worked example in a Rittman Mead blog post about this that might help: http://www.rittmanmead.com/2010/04/oracle-epm-11-1-2-essbase-calculations-on-aso-cubes-part-2-maxl-scripts-and-eas/
    The DBAG also says that the script files should have suffix .csc, while the Tech Ref example has suffix .txt - helpful!! If they were actually meant to sit in the server's db directory, I would be surprised to find the .csc suffix used, since that is also the suffix for aggregation scripts. Although me being surprised doesn't mean much.

  • Legacy data transfer for new depreciation area for already existing assets

    Hi all,
    I am doing legacy data transfer for New deprecaition area for already existing assets through AS92.
    I like to give Ordinay depreciation posted amount  for the current FY for these assets in AS92, but i find this field is not editable inAS92.
    Please guide me to upload the Posted deprecaiton amount (for current FY) for these assets. I have assets both which are acquired in Last FY year and also this FY year.
    Regards,
    Srinivas

    HI,
    I have to migrate Posted dpereciation for new depreciation for nearly 3000 assets, In transaction 147, where i need give Acquituion value aslo, please note these are not new assets, these are prior year assets wiht opeing balances. If we use 147 system will take it is current acquition.
    Please note my transter date is 28.02.2010, I have already run AFAB for this company cdoe Feb 2010 for other depreciation areas.
    Now i am trying to update Opening APC Cost and Opening Accumulated deprecation for these assets and also posted depreciation for this FY.
    Where in AS92, i am able to update Opeing APC Cost and Opeing  Acc Dep succsfully for new dep area for already existingassets, bu Posted deprecation field is not editable.
    Please guide me how to update posted deprecation for new deprecaition area  in AS92 or some other way for already existing assets.
    REgards,
    Srinivas

  • How to repeat depreciation run for fixed assets

    Dear Sir(s),
    we are on SAP B PL03. We would like to re-run depreciation for some fixed assets to correct a previous depreciation run which was executed by mistake. The depreciation was posted to the GL accounts.
    We are not able to get this option of re-running the depreciation even after changing the depreciation types of these fixed assets in the fixed asset master data. The depreciation run screen just displays a list of all previous depreciation runs.
    Asif

    Hi Asif,
    The last depreciation you have run showing you in depreciation window,that depreciation you executed by mistake van remove by right click on that depreciation row and remove that row. Doing this your financial posting will be reverse then you can execute depreciation for the same period.
    Thanks

  • Leasing facility on Fixed Assets Module

    Hi All,
    We are planning to use the leasing facility available on the Fixed Assets module. The cleint raised the question whether they can upload a file with all the leasing details.
    Therefore I just want to know whether there is an open interface or an API avaliable for uploading lease details on the fixed assets module.
    We are implementing R12.1.3
    Thanks and Regards,
    MPH

    Hello,
    Steps:
    a) Are you querying the Correct Asset?
    b) Are you querying the Correct Asset Book?
    If you have added a new assets in the same period and run the depreciation without checking the checkbox then the system will calculate the deprecation.
    Please reply what is the question you need to ask
    What is the actual problem r u facing.
    Srikanth

  • Using ABUMN for depreciated asset,, possible?

    Hi Gurus,
    I need to do a assets class transfer, for eg: Computer Software to Intangible Assets.  Currently I already close off my fixed assets till 31Jul09, that mean I had posted Jul09 depreciation, so when I do this transfer, can I back date the posting date, asset value date to 31Mar09 ?  Of cos, I will need to open the period for Mar09, in order to do this transaction, but is it the correct way to do it?  My doubt is I already completed depreciation till Jul09, am I allow to back date it again to 31Mar09 for the transfer?  Please advice
    Thanks

    Hi,
    The test here is till what date do you want to charge depreciation for the computer? And from what date do you want to consider the asset as an intangible asset?
       You can post with posting date in Aug 09 but provide asset value date as 31 Mar 2009. The extra depreciation on the computer (Apr to July) will be reversed in the month of Aug when you execute the Aug depreciaton posting. In addition the system will also pass the depreciation from Apr  to July on the new intangible asset if you have maintained depreciation rates for this asset in Aug.
    Rgds
    Shivram.

  • How to handle a fully depreciated asset that has been brought back to life?

    I have an old fully depreciated asset(from the 1990s) that has been brought back to life and has new cost to add to it.
    The fixed asset master data looks like this:
    Capitalization date: 01.01.1998
    Historic APC: 0
    Acquisition value: X
    NBV: 0
    Ordinary depreciation: X
    Depreciation tab - no planned depreciation(for current fiscal year).
    Now I want to add the new cost Y to it. I add a subsequent acquisition but the planned depreciation (on the Depreciation tab) is not what I expect. I can't figure out how it is getting that amount. Calculation should be Y / Useful life starting 1st day of current period.
    The depreciation type setup is NBV / Rem life, straight line depr, prorata temporis.
    Any ideas?
    Thanks

    Okay, I have just realized how the system is calculating depreciation.
    useful life = 36.
    There are 3 months left in the current fiscal year. Depreciation is calculated as Y / (36 -9) = one month's depreciation.
    Why? Is this correct from accounting point of view? My client expects the calculation to be Y / 36 even though we are in period 10 of the current year.

  • Accounting entries process in Fixed Asset Module

    Dear all,
    I don't know Accounting entries process in Fixed Asset Module. I don't know how to post accounting entries and manage fixed assets
    Anyone can share me documents that is relevant to business transaction in  fixed asset module.
    My ID: [email protected]
    Thank in advance
    Minh
    Edited by: Tran Binh Minh on Apr 21, 2008 5:04 AM

    Hi,
    Good Morning,
    We are using Oracle R 12 Version 12.1.3
    and the issue i m facing Corporate Book as we have not yet started Tax Book
    The Addition posted period is closed, but I want to change life in Open Period Mar 12 ( latest open period).
    Yes Depreciation Run for March 12.
    Please help
    Regards
    Anant Danve
    9820077180

  • Multiple depreceation areas in Fixed asset module

    Hi All
    My customer wishes to implement the fixed asset module and is currently running three separate books in his asset register.
    Each asset has a separate net book value for each book (i.e. depreciation area) since they are depreciated at different rates.
    Now i need to upload all the fixed assets but need to upload the three different net book values per asset based on the depreciation area selected - but cant seem to find a way to do this.
    If i create a new asset and then depreciate it, SAP shows the different net book values - so the system obviously supports the process. But how can i put in the assets?
    Any assistance would be appreciated.
    Thanks
    Wendy

    Hi,
    Good Morning,
    We are using Oracle R 12 Version 12.1.3
    and the issue i m facing Corporate Book as we have not yet started Tax Book
    The Addition posted period is closed, but I want to change life in Open Period Mar 12 ( latest open period).
    Yes Depreciation Run for March 12.
    Please help
    Regards
    Anant Danve
    9820077180

  • I want to check/see the total quantity of items from fixed asset module

    Dear All,
    When I create purchase requisitions or purchase order, at the time of selection of items (Printer etc)…
    I want to check/see the total quantity of items from fixed asset module.
    Please guide, me how can I see the total items are available in fixed assets, on purchase order
    Product Detail
    Database Server
    RDBMS : 10.2.0.5.0
    Oracle Applications : 11.5.10.2
    Machine : ofadb.thecityschool.edu.pk
    User : APPS
    Oracle SID : PROD
    System Date : 16-APR-2012 13:27:37
    Database Server PID : 13485
    Session SID : 1437
    SERIAL# : 12175
    AUDSID : 32767692
    Database CPU Usage (in secs) : 0.69
    Regards

    Oracle does not offer this functionality.
    You will have to write a personalization that will query FA based on the item and display the message to the user.
    To invoke this personalization, the user may have to go to tools > show FA. This Show FA is a new option you create by personalization.
    Sandeep Gandhi

  • Is it possible to RESET Fixed Asset Module to the first day we installed it

    Hi All,
    We setup our Fixed Assets module months ago and now realised that we need to have a clean FA Module, so that we can restructure it the way we need. (New categories, new assets, etc.)
    I was wondering if there is a concurrent program or another kind of program to basically RESET the FA (Like resetting it to default).
    I know, this sounds something almost impossible, but I would appreciate any kind of help.
    Thanks,
    Sinan Topuz

    Is there any way to cancle previous apple ID and create a new apple ID. Please help

  • Integration with EBS HR & Fixed Asset module

    Let me know the integration possibilities between:
    a) Oracle's EBS's HRMS module and Workforce Planning
    b) Oracle's EBS's Fixed Assets module and Workforce Capex Planning
    c) Oracle's EBS's AP module and Financial Planning

    I am assuming you are implementing Hyperion Workforce/Capex out of the box, right?
    In either case (out of the box/custom)... you have (at least) options.
    1) Export a flat file from the EBS HRMS/Fixed Asset system and load via FDM.
    2) Have FDM connect (via an FDM script) to the EBS HRMS/Fixed Asset database system and pull the correct data needed. This option is assuming you know the HRMS/Fixed Asset database table structure.
    I know this is a FDM forum but another option is Oracle Data Integrator (ODI).

  • How to relate the Fixed Asset module to Purchase Order?

    Hello experts,
    Good day!
    How can I relate the fixed assets to purchase order? Is there a ways, so that we can't create different item code for purchase cycle and fixed asset module...
    2nd, how to Increase the net  value of fixed assets ( vehicle, machines) without affecting Profit and Loss? what is the SAP process to do this? Please help me on this..
    Thanks,
    Mari

    Hi Mari,
    First I suggest you add a lot more info. Are you doing this in Crsytal Report Designer or are you referring to one of the SAP applications? If an SAP app then please mark this case as answered and post your question to the SAP forums.
    If you are using Crystal Reports then need more info like the version and what those tables are and if you can use a common link?
    Thank you
    Don

Maybe you are looking for