Adding Attachment to BPM Instance when initiated via IPM

Hi,
I've successfully done a BPM process instance creation from IPM. Now my requirement is to add attachments which are required for a human task inside BPM and that too from IPM side. Is that possible to attach documents from the IPM (Documents originally located in UCM) to BPM instance?

Thanks for your response.
Yah, What you said is correct, the document URI is the field which can hold the document URL (which is used for mapping payload with respective fields) that is used for initiating the BPM instance. My problem is I want to include the attachments too.
For Example,
customerdata.csv is the document which is going to initiate the respective BPM process. I want to include the ID_Proof.pdf (either document as attachment in the attachment section of the BPM process or UCM link of that document) with instance that is to be created.
According to your answer, the document uri field can only hold the link for customerdata.csv but not the ID_proof.pdf.
Please help me regarding this.

Similar Messages

Adding attachment via XML calls

I am trying to associate an attachment to a punch list item via XML in C#. Whenever I try to insert an Attachment object, I am getting a generic 'Error' message back. The XML is properly formed and I am populating it with values in the same locations as a file attached via the Contract Management interface. The code to insert the punch list item works fine and it appears in the CM interface. Does anyone have any experience with this scenario? Note: I am uploading the physical file separately.

Here is an example of one that worked here. A couple comments on yours. I did not see a Base_sys_item_type in your code. Which I believe is required for this table. Usually whan I have a question about what data I need to send I'll add a record manually then duplicate what I see in the table. Another thing you should know is that the API will not receive actual files. All it currently does is create links. Files still need to be placed in the correct location. I do that here using some code that copies the files to the correct location when we load in bulk.
We are using CM on some huge projects. I have used the API to integrate and to add/delete/update hundreds of thousands of records. Each module seems to be slightly different, so be wary and always test if/how the API works. Each type can have it's own unique list of required fields etc..
<?xml version="1.0" encoding="UTF-8"?><request xmlns="http://app.expedition.com/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://app.expedition.com/ http://127.0.0.1/exponline/xml-schemas/request.xsd"><header requestType="DETAIL" sysitemtype="DLNK"><sessionId>000TfQLKK1000630000000BURN</sessionId><action>INSERT</action><getUpdatedDataInResponse>true</getUpdatedDataInResponse></header><DLNK>
     <attachment>J:\data\<Attachment Name>.PDF</attachment>
     <base_item_type>SNT</base_item_type>
     <base_master_key>0002YOCBJ0727800000000BURN</base_master_key>
     <base_parent_key></base_parent_key>
     <base_sys_item_type>SNT</base_sys_item_type>
     <created_by></created_by>
     <created_date></created_date>
     <created_system></created_system>
     <date_linked>2009-02-03T12:00:00.0000000</date_linked>
     <file_size>0</file_size>
     <is_a_url>0</is_a_url>
     <item_type>DLNK</item_type>
     <last_edit_by></last_edit_by>
     <last_edit_date></last_edit_date>
     <last_edit_system></last_edit_system>
     <linked_by_user>Joe Manzi</linked_by_user>
     <linked_by_user_name>Joe Manzi</linked_by_user_name>
     <location></location>
     <master_key></master_key>
     <project_name>"Your Project name"</project_name>
     <sender_login_name></sender_login_name>
     <subject>test</subject>
     <sys_item_type>DLNK</sys_item_type>
</DLNK></request>

Mail slow/hangs when adding attachment

Recently Mail hangs or takes a long time, showing the spinning beachball, when adding an attachment. For instance it took over two minutes to add a 44k Word document - previously it would be seconds.
This happens with all user accounts on this Mac.
I've not added any software recenttly that may have caused this.
Any suggestions?
Thanks
Bruce

Go to Apple Menu > System Preferences > Network, choose Network Port Configurations from the Show popup menu, and make sure that the configuration used to connect to Internet appears at the top of the list. Leave checked (enabled) only the port configuration needed to connect to Internet and Built-in Ethernet (in that order if not the same), uncheck (disable) the rest of network port configurations (Parallels in particular, if you have that installed) and see whether that helps — if it doesn’t, turn ON again the ones you want enabled.
I've not added any software recenttly that may have caused this.
Not sure what you mean. Are you saying that you haven’t installed any software recently, or that you have installed something but you know for sure it cannot have a bearing on this? If the latter, how do you know?

CloudControl 12c: when adding cluster-database single instances are missing

Hello ,
I'e have installed the agent 12c on every single host of our RAC. When adding a database to CloudControl 12c just the RAC-instance gets discovered - but not the single database instances on each host.
Due to this when clicking targets -> databases I just see the cluster-database - but not every single instance of the database.
Compared to another RAC database this is totally different behaviour.
Any help will be appreciated
Rgds
JH

Hello ,
maybe I should try to explain the issue a little bit clearer...
We have one RAC database called PROD02. When clicking "targets -> databases" I see the following:
PROD02 of type Cluster Database
PROD021 of type Database Instance
PROD022 of type Database Instance
That's the way it shoudl be - that's the way I expected it...
For the newly cofgured RAC database, called PREP02, it looks different when clicking "targets -> databases"
PREP02 of type Cluster Database
The single instances don't show up. Of course I see the single instances when clicking on "PREP02" under the item "Instances".
Now I wonder why these two RAC databases are differently displayed when clicking "targets -> databases". When trying to add the single instances (clicking "Add" under "targets -> databases") and selecting then either "only on the host <hostname>" or "on all hosts in the cluster" no single instances are found or displayed...
Rgds
Jan

Adding attachment via File browse not working

Hi, I'm using Apex 4.1.1 through GlassFish server 3.1.1. Recently I've imported my database application and after running my app, adding of an attachment isn't working anymore. Before I used Apex via Emb. PL/SQL Gateway(from which I've exported app sql) and everything worked just fine. My code for adding attachment is like this:
IF (:P2_ATTACHMENT IS NOT NULL)
THEN
INSERT INTO ATTACHS
(ID_ATACHMENT,NAME_ATTACH, TYPE_ATTACH, ATTACHMENT, DATE_ATTACH)
SELECT ID,NAME, mime_type,blob_content, sysdate
FROM wwv_flow_files
WHERE NAME = :P2_ATTACHMENT;
DELETE wwv_flow_files
WHERE NAME = :P2_ATTACHMENT;
:P2_ATTACHMENT := NULL;
END IF;
If I skip this piece of code, and try to submit page(where is also couple of other insert statements), then is ok.
What is the problem of this, GlassFish, wwv_flow_files table, apex listener...?
Thanks.

Hi,
>
isn't working anymore.
>
Do you get an error? What diagnostic details do you have? E.g. what do see in View Debug if you run the page in Debug mode?
Prima facie, there is nothing wrong in the code or in the infrastructure.
Regards,
PS: Please post code in {code} tags.
Edited by: Prabodh on Jun 21, 2012 5:00 PM

PAPI-Add/Delete/Retrieve BPM Instance's data and attachment for an instance

Could you please me tell me how to Add/Delete/Retrieve BPM instance's data and attachment for a new as well as running instance using PAPI. Is it possible to have
a sample code.
Thanks,
Ben.

Hi Ben,
Start with this thread that shows you how to create a new work item instance in a process and pass in input argument variables to the new instance as it is created:
Creating a new work item instance in a process using PAPI
Here's a thread that shows how to retrieve variables from an instance:
Re: Instance info using PAPI in studio
Here's a thread that shows
1. how to run an activity in the process and pass in arguments using the "runActivity()" method,
2. How to run a Global activity and pass in arguments (runGlobal() and
3. How to send in a notificationto a notificationWait activity using the "sendNotificationInstance()" method:
Re: Acces Oracle BPM Process through Standalone Java Program
Finally, you can use the session.instanceAttach() method to attach a file to an instance.
Hope this helps,
Dan

Error when initializing work area SYST

Dear All,
I am upgrading from SAP 4.7 to ECC 6.0 (Oracle)
I have upgraded database from Ora 9i to 10g and client from 81x to 10.2.0.2 and kernel to 700.
Now after startsap .....its hows satrted successfully but on click of logon pad it gives error-
Error when initializing work area SYST
Pls help ....wat shd i do now ?
Regards,
Ankita.

Hello Markus,
I have upgraded to kernel 700 patch level 102 for sun Solaris Sparc system.
The trace file is as below:
****************************dev_wo Tarce file************8
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        DEV
M systemid   370 (Solaris on SPARCV9 CPU)
M relno      7000
M patchlevel 0
M patchno    102
M intno      20050900
M make:      single threaded, ASCII, 64 bit, optimized
M pid        2953
M
M
M Thu Aug 23 15:53:05 2007
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 2953) [thxxhead.c   1267]
M ThInit: running on host bssldev1
M calling db_connect ...
C Oracle Client Version: '10.2.0.2.0'
C Client NLS settings: AMERICAN_AMERICA.WE8DEC
C Logon as OPS$-user to get SAPPRD's password
C Connecting as /@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1 10560cd20 1056147c0 105618168
C Attaching to DB Server DEV (con_hdl=0,svchp=105618098,srvhp=10561a3c8)
C
C Thu Aug 23 15:53:06 2007
C Starting user session (con_hdl=0,svchp=105618098,srvhp=10561a3c8,usrhp=105614fd8)
C Now '/@DEV' is connected (con_hdl 0, nls_hdl 0).
C OCI-call failed with -1=OCI_ERROR
C     SQL error 942: 'ORA-00942: table or view does not exist'
C *** ERROR => ORA-942 when accessing table SAPUSER
[dbsloci.c    11354]
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=105618098,usrhp=105614fd8)
C Now I'm disconnected from ORACLE
C Try to connect with default password
C Connecting as SAPPRD/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 010307)
C Nls CharacterSet                 NationalCharSet              C      EnvHp      ErrHp ErrHpBatch
C    0 WE8DEC                                                    1 10560cd20 1056147c0 105618168
C Starting user session (con_hdl=0,svchp=105618098,srvhp=10561a3c8,usrhp=105614fd8)
C Now 'SAPPRD/<pwd>@DEV' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.WE8DEC
C DB instance DEV is running on bssldev1 with ORACLE version 10.2.0.2.0 since AUG 23, 2007, 15:52:47
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName          ConId     ConState     TX PRM RCT TIM MAX OPT Date     Time   DBHost
B 000 000 R/3              000000000 ACTIVE       NO YES NO 000 255 255 20070823 155305 bssldev1
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I MtxInit: 0 0 0
M SHM_PRES_BUF               (addr: ffffffff78656000, size: 4400000)
M SHM_ROLL_AREA          (addr: fffffffe5a000000, size: 134217728)
M SHM_PAGING_AREA          (addr: fffffffe54000000, size: 67108864)
M SHM_ROLL_ADM               (addr: ffffffff78a8c000, size: 2672386)
M SHM_PAGING_ADM          (addr: ffffffff73b00000, size: 656416)
M ThCreateNoBuffer          allocated 352144 bytes for 1000 entries at fffffffe4e004000
M ThCreateNoBuffer          index size: 3000 elems
M ThCreateVBAdm          allocated 7440 bytes (50 server) at ffffffff73a00000
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation std
X <ES> Info: use normal pages (no huge table support available)ES initialized.
B
B Thu Aug 23 15:53:07 2007
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8, CON_ID = -1
B
B Thu Aug 23 15:53:10 2007
B dbtbxbuf: Buffer TABL (addr: fffffffe4c000100, size: 30000000, end: fffffffe4dc9c480)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14431488
B ***LOG BB0=> buffer TABL       started with length 30000000   bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Buffer TABLP (addr: ffffffff70400100, size: 10240000, end: ffffffff70dc4100)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5057728
B ***LOG BB0=> buffer TABLP      started with length 10240000   bytes [dbtbxbuf#2 @ 16178] [dbtbxbuf1617 8]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 3 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 432 = 432
B 2: 8 * 40 = 320
B 3: 4001 * 64 = 256064
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28005 * 128 = 3584640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer EIBUF (addr: fffffffe6f800108, size: 4194304, end: fffffffe6fc00108)
B ***LOG BB0=> buffer EIBUF      started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of ESM   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 432 = 432
B 2: 8 * 40 = 320
B 3: 4001 * 64 = 256064
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 65 * 8 = 520
B 8: 28005 * 128 = 3584640
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer ESM   (addr: fffffffe68400108, size: 4194304, end: fffffffe68800108)
B ***LOG BB0=> buffer ESM        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of CUA   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 432 = 432
B 2: 8 * 40 = 320
B 3: 3001 * 64 = 192064
B 4: 1500 * 160 = 240000
B 5: 3001 * 8 = 24008
B 6: 1 * 200 = 200
B 7: 193 * 8 = 1544
B 8: 10208 * 256 = 2613248
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer CUA   (addr: fffffffe50dec108, size: 3072000, end: fffffffe510da108)
B ***LOG BB0=> buffer CUA        started with length 3000k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B Layout of OTR   buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 432 = 432
B 2: 8 * 40 = 320
B 3: 4001 * 64 = 256064
B 4: 2000 * 160 = 320000
B 5: 4001 * 8 = 32008
B 6: 1 * 200 = 200
B 7: 81 * 8 = 648
B 8: 28004 * 128 = 3584512
B Tracing = 0, Shm Protection = 0, Force checks = 0, Recovery delay = 500000
B dbexpbuf: Buffer OTR   (addr: fffffffe63800108, size: 4194304, end: fffffffe63c00108)
B ***LOG BB0=> buffer OTR        started with length 4096k      bytes [dbexpbuf#2 @ 2342] [dbexpbuf2342 ]
B ***LOG BB0=> buffer CALE       started with length 500000     bytes [dbcalbuf#4 @ 2228] [dbcalbuf2228 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B   max_blocking_factor =   5, max_in_blocking_factor      =   5,
B   min_blocking_factor =   5, min_in_blocking_factor      =   5,
B   prefer_union_all    =   0, prefer_join                 =   0,
B   prefer_fix_blocking =   0, prefer_in_itab_opt          =   1,
B   convert AVG         =   0, alias table FUPD            =   0,
B   escape_as_literal   =   1, opt GE LE to BETWEEN        =   0,
B   select *            =0x0f, character encoding          =SBCS / <none>:-,
B   use_hints           = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B                         rule_fae->0, concat_fae->0, concat_fae_or->0
M
M Thu Aug 23 15:53:11 2007
M SecAudit(RsauInit): Start init of Security Audit Log for first wp.
M SecAudit(RsauInit): Shared memory for Security Audit Log already exists.
M SecAudit(RsauInit): Re-initialize with new profile parameters
M SecAudit(RsauShmInit): SCSA size................ = 4096
M SecAudit(RsauShmInit): addr of SCSA............. = ffffffff75f00000
M SecAudit(RsauShmInit): addr of RSAUSHM.......... = ffffffff75f00450
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO..... = ffffffff75f00488
M SecAudit(RsauShmInit): addr of RSAUSLOTS........ = ffffffff75f00494
M SecAudit(RsauShmInit): SHM version.............. = 5
M SecAudit(RsauShmInit): SHM Slot version......... = 2
M SecAudit(RsauShmInit): RSAU active.............. = 0
M SecAudit(RsauShmInit): number of slots possible. = 10
M SecAudit(RsauShmInit): number of slots requested = 2
M SecAudit(RsauShmInit): number of slots used..... = 2
M SecAudit(RsauShmInit): user selection........... = 0
M SecAudit(RsauShmInit): max size of one file..... = 0 KB
M SecAudit(RsauShmInit): max size of all files.... = 102400 KB
M SecAudit(RsauGetCurrentProfile): Init of shared memory completed
M SecAudit(RsauGetCurrentProfile): Security Audit Log not active
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=/usr/sap/DEV/DVEBMGS00/sec, AS=bssldev1, instanceid=00)
N SsfPseLoad: Downloading file /usr/sap/DEV/DVEBMGS00/sec/SAPSYS.pse (client:    , key: SYSPSE, len: 1077)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
M CCMS: AlMsUpload called by wp 0.
M
M Thu Aug 23 15:53:14 2007
M CCMS: AlMsUpload successful for /usr/sap/DEV/DVEBMGS00/log/ALMTTREE (1387 MTEs).
S
S Thu Aug 23 15:53:15 2007
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 10594d3e0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile)   = 300
S hostspool list size = 3000
S option list size is 30
S      found processing queue enabled
S found spool memory service RSPO-RCLOCKS at fffffffe510de060
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at fffffffe510de368
S    using messages for server info
S size of spec char cache entry: 165024 bytes (timeout 100 sec)
S size of open spool request entry: 1192 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A -PXA--
A PXA INITIALIZATION
A System page size: 8kb, total admin_size: 5152kb, dir_size: 5112kb.
A Attached to PXA (address fffffffe42000000, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm attached (addr=fffffffe7054a000 leng=20938752 end=fffffffe71942000)
A >> Shm MMADM area (addr=fffffffe70772058 leng=144768 end=fffffffe707955d8)
A >> Shm MMDAT area (addr=fffffffe70796000 leng=18530304 end=fffffffe71942000)
A RFC Destination> destination bssldev1_DEV_00 host bssldev1 system DEV systnr 0 (bssldev1_DEV_00)
A RFC Options> H=bssldev1,S=00,d=1,
B table logging switched off for all clients
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 1
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects          allocated 8352 bytes at ffffffff72b00000
N SsfSapSecin: putenv(SECUDIR=/usr/sap/DEV/DVEBMGS00/sec): ok
N SsfSapSecin: PSE /usr/sap/DEV/DVEBMGS00/sec/SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/DEV/SYS/exe/run/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
M *** ERROR => SlicLikeyGetAllRecords: RS_OPEN failed rc=32 [sliclikey.c 988]
M *** ERROR => likey_init: likeyche_fill_buffer: couldn't get the list of all records from the persistence. [sliclikey.c 1269]
M *** ERROR => SlicLikeyInit: likey_init failed: 1 [sliclikey.c 261]
M *** ERROR => SAPlicense: LIKEY initialisation failed! [slicshm.c    268]
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
W    ITS Plugin: Path dw_gui
W    ITS Plugin: Description ITS Plugin - ITS rendering DLL
W    ITS Plugin: sizeof(SAP_UC) 1
W    ITS Plugin: Release: 700, [7000.0.102.20050900]
W    ITS Plugin: Int.version, [33]
W    ITS Plugin: Feature set: [13]
W    ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
S server @>SSRV:bssldev1_DEV_00@< appears or changes (state 1)
M *** ERROR => R/3 release 620 is not supported with this kernel (700) [thxxsick.c   237]
A *** ERROR => R/3 release 620 is not supported with this kernel (700) [sapicc.c     1082]
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:53:17 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:53:17 2007
A
A ABAP Program ????????????????????????????????????????.
A Source                                          Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error when initializing the work area SYST..
A
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:53:18 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:53:18 2007
A
A ABAP Program ????????????????????????????????????????.
A Source                                          Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A
A Thu Aug 23 15:53:34 2007
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:53:36 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:53:36 2007
A
A ABAP Program ????????????????????????????????????????.
A Source                                          Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_GOTO_SAPDEXT
A Error when initializing the work area SYST..
A
M ***LOG R47=> ThResFree, delete (001024) [thxxmode.c   1364]
A
A Thu Aug 23 15:54:19 2007
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:54:20 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:54:20 2007
A
A ABAP Program ????????????????????????????????????????.
A Source                                          Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A
A Thu Aug 23 15:54:31 2007
A TH VERBOSE LEVEL FULL
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_MTX completed.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER entered.
A ** RABAX: level LEV_RX_COVERAGE_ANALYSER completed.
A ** RABAX: level LEV_RX_ROLLBACK entered.
A ** RABAX: level LEV_RX_ROLLBACK completed.
A ** RABAX: level LEV_RX_DB_ALIVE entered.
A ** RABAX: level LEV_RX_DB_ALIVE completed.
A ** RABAX: level LEV_RX_HOOKS entered.
A ** RABAX: level LEV_RX_HOOKS completed.
A ** RABAX: level LEV_RX_STANDARD entered.
A ** RABAX: level LEV_RX_STANDARD completed.
A ** RABAX: level LEV_RX_STOR_VALUES entered.
A ** RABAX: level LEV_RX_STOR_VALUES completed.
A ** RABAX: level LEV_RX_C_STACK entered.
A
A Thu Aug 23 15:54:33 2007
A ** RABAX: level LEV_RX_C_STACK completed.
A ** RABAX: level LEV_RX_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK entered.
A ** RABAX: level LEV_RX_AFTER_MEMO_CHECK completed.
A ** RABAX: level LEV_RX_INTERFACES entered.
A ** RABAX: level LEV_RX_INTERFACES completed.
A ** RABAX: level LEV_RX_GET_MESS entered.
A ** RABAX: level LEV_RX_GET_MESS completed.
A ** RABAX: level LEV_RX_INIT_SNAP entered.
A ** RABAX: level LEV_RX_INIT_SNAP completed.
A ** RABAX: level LEV_RX_WRITE_SYSLOG entered.
A ** RABAX: level LEV_RX_WRITE_SYSLOG completed.
A ** RABAX: level LEV_RX_WRITE_SNAP entered.
A ** RABAX: level LEV_SN_END completed.
A ** RABAX: level LEV_RX_SET_ALERT entered.
A ** RABAX: level LEV_RX_SET_ALERT completed.
A ** RABAX: level LEV_RX_COMMIT entered.
A ** RABAX: level LEV_RX_COMMIT completed.
A ** RABAX: level LEV_RX_SNAP_SYSLOG entered.
A ** RABAX: level LEV_RX_SNAP_SYSLOG completed.
A ** RABAX: level LEV_RX_RESET_PROGS entered.
A ** RABAX: level LEV_RX_RESET_PROGS completed.
A ** RABAX: level LEV_RX_STDERR entered.
A Thu Aug 23 15:54:33 2007
A
A ABAP Program ????????????????????????????????????????.
A Source                                          Line 0.
A Error Code SYSTEM_CANT_CLEAR.
A Module $Id: //bas/700_REL/src/krn/runt/abinit.c#15 $ SAP.
A Function ab_isyst Line 1401.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS entered.
A ** RABAX: level LEV_RX_RESET_SHMLOCKS completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
A ** RABAX: end no http/smtp
A ** RABAX: end RX_BTCHLOG|RX_VBLOG
A Error when initializing the work area SYST..
A
Thanks,
Ankita,

Attachment for completed Instance

Hi All,
I have a dirty requirement where I have to attach documents to completed instances.I tried in studio , it allows me to do so from the attachment section.But I have to this through code and not use the product feature.I have to enter the instance number and attach files from a presentation to a completed instance.Does anybody has an idea as how can i implement this? :(
Kind Regards,
Ritu S.

Hi Ritu,
You can see in chain messages how to hold instance for your requirement. But I don't think its a viable way since BPM objects might be holding large data in your case. Best way is to make lead aware of the same and let him take the decision of fulflling the requirement.
One case to handle the above case:
1. Add automatic activity before "End" transition and a due transition from this activity to "End".
2. Before reaching the instance to this automatic activity, set all instance variables to "Null". It will in turn will not have impact on BPM Engine DB.
3. Use notification and wait activity to add "Attachment" for the instance and at the same time, set the due transition value to "0s".
Now, it will be upto you to decide as per requirement, when you need to complete the instance. This thing can also be put up to the client so that the due transition value can be set accordingly.
Regards,
Abhishek

Upload attachment using BPM File Chooser in OBPM 10g

Hi,
I am currently working on OBPM 10g.
Can anyone please help me with upload attachment using BPM File Chooser using BPM Presentation?????

Do not use the existing Fuego.Ui.FileChooser component. This OOTB Oracle BPM component would work fine if you're trying to get a file from the server where the Engine is running, but will not work if you want a file from the end user client's machine.
Take a look at a project I uploaded to http://www.4shared.com/file/aq-cY2qN/_2__FileChooserDemo.html
It has both a JSP and a BPM Object presentation. The BPM Object presentation has a button called "Attach File", If you click in the presentation editor and then click the Properties tab you'll see that its "Name" property is "AttachFile" and the Action property is set to "submit". This means that it will return the text "AttachFile" in the result predefined variable in the screenflow. If you open the screenflow, you'll see the conditional transition from the "AttachmentViewerInteractive" to the "FileChooser" task. The name of this transition is "AttachFile". Because this was named "AttachFile", the logic behind this transition evaluates if "result ==AttachFile".
Be careful with this example project. It will succeed when a small text or binary file < 100k is selected. It will go to the "File is too big" task in the screenflow shown below when the file > 100k. To make this maximum size limit larger, simply add a new line in your
<Oracle BPM Enterprise Home Directory>\webapps\workspace\WEB-INF\workspace.properties file:
# Max size of a file coming from a client machine (default is 100k)
fuego.workspace.servlet.Attachment.MAX_ATTACHMENT_SIZE=2000000
Once the file has been retrieved, do not store this as an instance variable unless it has been marked as a “Separated” instance variable.
The “AttachView1.jsp” is invoked from the Interactive activity’s “FileChooser” task in the screenflow.
Once the end user selects the file from the JSP, work flows to the “Add file” task. This is where you can retrieve the selected file’s:
- Name: fileHolder.file_filename variable
- Content type: fileHolder.file_content_type variable
- Contents: fileHolder.file binary variable
Dan

We added an dialog abap instance to a system consisting of 3 DI and one CI

We added an dialog abap instance to a system consisting of 3 DI and one CI.
When trying to switch instance from new instance in sm51 to old instance while being logged to an new instance directly this is possible
However when trying to switch instance in sm51 to new instance while being logged to an old instance this is not possible.
What could be the reason?

jan,
My first thought is whether the hostname of the new instance is availble to the old Dialog Instances (via the services file or DNS) ?
Failing that, can you answer these questions...
1) if you use SM51 to connect to an old instance from the new instance, can you then use SM51 to connect back to new instance ?
2) When you access the new system from SM51, how does the logon fail ?
invalid user / password ?
Load balancing failure ?
Connectivity failure ?
You'll probably find the answer to your problem if you investigate down these three lines. However, a more arcane cause could be the network topology...
Are the instances on the same IP subnet ?
Are the instances on the same domain or subdomain ?
Check that there's nothing strange going on with the IP subnet mask.
Good luck

Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
Thanks.
Solved!
Go to Solution.

This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants. Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected. When no connection is detected you could have the program run in an idle state. The attached screenshot shows a general way to do this. Have a good evening!
-Bob
-Bob
Attachments:
idle state.JPG ‏45 KB

Server Admin not connecting to Leopard Server when accessing via VPN

Hi everyone,
Recently, as the title suggests, Server Admin (or Server Preferences, for that matter) would not connect to my remote server via VPN. I'm quite sure that the server is working nicely, as the users (both of them lovely young ladies with considerable charms, which makes on-site support quite interesting, if distracting) didn't call me to complain, and I can login via SSH with no problems.
The server is a Mac Mini, connected to an Airport Extreme (gigabit N), which in turn connects to our ADSL modem, if that helps any.
Now, I did tinker around a bit with the settings before this happened, so I think it's probably my fault (well, I started my "career" of administering this server a week ago, what do you expect), so I suppose I may have inadvertently limited access to a service required for Server Admin and Server Preferences to function.
If anyone could tell me which services are absolutely necessary for Server Admin to function, or at least where to start looking, I'd be immensely grateful. I didn't yet go on site to try and wrestle the whole thing from there, as the travel costs are non-trivial, so I'd rather do it remotely, if at all possible.

This is exactly the difficulty I am having with a 10.5.4 Intel xserve. I have established a VPN connection that connects me to my business LAN, and I know it has carried out the connection because there are a number of things I can access properly that are not available on the public internet. For instance, my LOM ports are restricted to my business LAN, and when I connect to the server via VPN I can access teh LOM ports and using server monitor. However, when I try to use Server Admin, nothing works. It won't connect. I too am confused. All traffic to the xserve is allowed via the business LAN. I thought all traffic was supposed to be routed to the VPN server when connected via a VPN. If this is the case, shouldn't Server Admin work? When I go on site and connect my computer directly to the business LAN, I have no difficulty using Server Admin.

Attachment modifications not saving when routing document

The issue is that in some cases attachment file modification are not saved and forwarded to the next recipient when using the routing slip feature.
Here is the scenario:
A user sends an excel document as an attachment and routes to several users via the groupwise routing slip feature.
The normal and successful work flow is this:
Next user in the route recieve the email.
Opens the document (in excel) and makes some changes in the document.
They select save (not save as).
Then then click the "completed" check box to continue the routing.
The next user will receive the email and attachment and the changes will be included.
The issue is that in many cases (about 50% of the time) the attachement edits will not stick and are not included for the subsequent recipients.
I have done some experimentation and it appears to be related to how the groupwise client handles temporary files.
It looks like there are two different folders used - my documents\groupwise and user\local settings\temp\xpgrwise.
When it works it appears that "edits" are saved in the temporary files folder and then "re-attached" to the routed email.
And the temp files are deleted when the email is closed.
In the failed scenario the attachment file does not get deleted from the temporary folder (and edits are not forwarded).
It appears to me that there may be another "unknown" temp file folder someplace that is being referenced and causing the issue.
We are using groupwise 8 client by the way and I think the issue started after the version 8 upgrade.
Has anyone else experienced and/or resolved this.
Any help would be much appreciated.

jensenms,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

OracleJSP error while integrating BPM Instance Details Task Flow

Guys,
I'm using 11.1.1.6 jdeveloper and BPM.
I have a requirement to show BPM 'Process Instance Details' (which contains 'Details', 'Open Activities', 'Audit Trail' etc.. for a BPM Instance).
I followed the following Link to implement this ....
http://soadev.blogspot.com/2011/07/adf-uishell-application-with-oracle-bpm.html
Everything was working fine.
But when i click on 'Graphical View' in 'Audit Trail', i dont get the graphical view. Instead i get the following error message...
OracleJSP error: oracle.jsp.parse.JavaCodeException: Line # 1, oracle.jsp.parse.JspParseTagScriptlet@16b871b3
Error: Java code in jsp source files is not allowed in ojsp.next mode.
Any pointer to solved this problem?
Thanks in advance
Dev

Did you check these post ?
https://forums.oracle.com/thread/993257
https://forums.oracle.com/thread/1097866
http://middiu.blogspot.com/2012/02/oracle-webcenter-spaces-and-webxml.html

Adding Comments in BPM 11g on Human task

Hi
Whenever i am adding comments on bpm human task,I am getting the following error when i submit the form.
"Workflow Service Engine callback to SOA mesh failed.Callback operation ontaskcompleted from default/BPMProject!1.0/ApproveTask to Process/HumanTasks.ApproveTask.reference failed with error:Schema validation failed for message part payload.Please ensure at the message sender level that the data sent is schema compliant.Invalid text ' in element:type.Check the underlying exception.Ensure that the SOA composite is configure correctly."
But if i try to submit the human task without adding comments it works fine.
Please tell me what am i missing here.
Regards....

hi
any inputs...Urgent
Regards...

Adding Attachment to BPM Instance when initiated via IPM

Similar Messages

Maybe you are looking for