Adding Audio and Video Content to EPUB from InDesign CS5.5 | CS5.5 Design Premium Feature Tour | Adobe TV
In this episode, Colin Fleming shows how simple it is to embed audio and video content in InDesign CS5.5 for export to EPUB.
http://adobe.ly/xT0jKh
I have placed audio and video into InDesign. I did it just exactly the way this video told me. Everything works well in the preview panel. However, when I exported it to EPUB, the file of the EPUB is so small (I guess, it should have been larger because I had added video and audio file into it). Plus, When I open it in EPUB reader (ibook) and Adobe Digital Edition, It shows nothing.
What I want to do is to create an EPUB which contains image, and sound. I want to make the image as a button which plays sound when I click it. I did it by setting he button to play when clicked, but again, it is not showing at all when published to EPUB.
I hope that there will be a good solution to this matter.
Thank You.
Similar Messages
-
I would like to see a built-in way of adding audio and video files.
As it is, you have to rely on third-party solutions for adding mp3 audio files and video to Muse sites. Thanks
Hi,
I tried to reproduce what you were getting by building a simple VI but I havent had much luck (I have attached the VI).
Could you post your code so that I can take a look at it?
Feroz P
National Instruments
Attachments:
Graph.vi 39 KB -
Flickr is deformatted. This forum is deformatted. Can't see the streaming toolbars at my public radio station. Can't stream news shows that I suually watch.
It all works fine with IE. I had to switch to Explorer to access this forum!I had this problem too after i upgdatd to OS X Mavericks... only the songs on my iphone 5s that i purchased from itunes would play.
i read something about it being a syncing issue. when you plug your phone into your computer with the usb cable, the person said to switch from automatic syncing of itunes to the "manual" option. mine was already set to manual so i wasn't sure anything would work. BUT, when i plugged my phone into my computer, it started to sync all of my music on my phone again (top of itunes bar where song playing/time is listed said "now syncing 123/534 songs to x's iphone"). once that was completed, i checked the music app on my iphone and everything was back to normal!
so, i would suggest setting your music syncing settings to manual if you haven't tried that yet!
hope this helps! -
Audio and Video option missing from Export Quicktime Movie Include
Today as I was exporting a clip, I noticed that the Audio and Video option was missing from the Include drop down. I only have the options of Left, Center, Right.
I highlight the sequence, control E (or File>Export>Quicktime Movie) and the Save window comes up. The Settings drop down is the same, the Markers: drop down is the same, but the Include: has the options of Left, Center and Right. I thought the Video and Audio dropdowns were always there. I hate to admit it, but I have not paid attention to them in a while. Getting old I guess.
Sequence settings is 720x480 NTSC DV (3:2)
NTSC - CCIR 601 / DV (720x480)
Lower (Even)
29.97
QT Video Settings
DV/DVCPRO - NTSC
100%
Audio
48 kHz
16-bit
Channel Grouped
Did I miss something?
ThanksThanks, forgot about that.
For what ever reason it started working correctly a couple of hours later, after I started an SD project. The video came out fine
I had been trying out a couple new applications, so maybe one was causing it. I will see if it happens in the future.
Jim -
Adobe Presenter - audio and video
Could someone please tell me the difference between adding
audio and video to a PP presentation via PowerPoint vs. importing
and adding audio and video using the Presenter tab?
Also, I'm looking for a list of things that won't work when
publishing. For example, I noticed that animations, slide
transitions and QuickTime movies won't work after publishing.
Thanks SO much.
LeonaCheck out the documentation on Presenter -- there are some
very specific ways you need to add audio (use "Record Audio" or
"Edit Audio" in the Presenter menu) and video (use "Insert video"
in the Presenter menu).
Powerpoint has facilities to do these things as well, but
Presenter won't be able to publish them, from what we've
determined.
For animations, again, read the documentation carefully --
all your animations have to be set to "On Click" or "With Previous"
-- i.e., they can't be timed animations. Again, Presenter won't be
able to translate these timed animations -- you must "click" them
into view (you do this as you're recording audio with "Next
Animation", or you can do it after recording audio using
"Synchronize Audio"). -
Audio and video do not sync when exporting
the audio and video content do not sync when exporting to media browser or quicktime.. at times the audio is delayed, or ahead of the video
Wow, I was just about to post something similar. I've tried 4 different times, wasted a few dvds, and tried various ways of outputting to solve this...nothing. Here's my situation;
• I have a series of stills, with music underneath...kind of like a slide show.
• That ends, both music and visual, and I go to a black screen/slug that is :22, to give some breathing room before the video that follows. Also, the audio track fades out at the end of the stills...it does not continue into the slug.
• After the :22 of black, I fade into a video. HOWEVER, everytime I've done that, the AUDIO portion of that video is starting while there's still black on screen, then when the video comes in, it's way behind.
I've adjust the audio to now end before the slug, thinking that was somehow making iMovie go wonky. Didn't work. I've wasted a few dvds before I got smart and started checking before burning. And still, everytime, that section is not syncing, but, i syncs in iMovie, where I made the video.
This is HUGELY frustrating. -
Windows 8 and CS5.5 Design Premium
I got a new computer for Christmas and it is running Windows 8. Do I need any updates for my CS5.5 Design Premium? The Adobe Flash Catalyst does not appear to be installing properly and the "Read Me" documentation does not address Windows 8 issues.
Sorry, but Flash Catalyst was discontinued by Adobe, and will not be supported on newer operating systems.
Chris Griffith -
HT2494 what connector to buy to transfer audio and video from macbook to tv?
what connector to buy to transfer audio and video from macbook to tv? I read that if I buy the normal mini display port to hdmi converter that the audio will not transmit through my tv. I there a certain thing I need to buy to make this happen? I have a Macbook 13 inch Early 2008.
You can sync photos and videos to your iPad via your computer's iTunes.
To sync photos, connect and select your iPad on the left-hand sidebar of your computer's iTunes (you can enable the sidebar via option-command-S on a Mac), and on the right-hand side there should be a series of tabs, one of which should be Photos - if you select that tab you can then select which photo folders to sync to the iPad. There is a bit more info on this page. You will need to sync all the photos that you want on the iPad together in one go as only the most recent photo sync remains on the iPad - synced photos can't be deleted directly on the iPad, instead they are deleted by not including them in the next photo sync.
If the videos are films that you want to go into the Videos app then you first need to add them to your computer's iTunes library via File > Add To Library, and you can then use the Films/Movies tab to select and sync them
Syncing media : iTunes: Syncing media content to iPod
What format are the videos in that you want to download, and have you got an app on your iPad that supports that format ? -
Instant messenger programme that supports audio and video from mac to pc
hi
can anyone recommend a good IM programme that gives audio and video from a mac to a windows based pc.i am using an isight on my mac and the person at the other end is just using a bog standard web cam.i tried yahoo but didnt realise it doesnt support audio for the mac, arghhhhhh. i have also seen something called mercury messenger is this any good.i have an ibook g4 running osx 10.4 and other end using win xp
many thanks karl
ibook g4 Mac OS X (10.4.6)Hi kb1483,
iChat to AIM 5.9 or Trillian works for me.
FAQ on subject http://discussions.apple.com/thread.jspa?threadID=406147
But then I wrote that FAQ and this is a Discussion area on the device Apple produced to work with iChat.
EZ Jim's FAQ on subject http://discussions.apple.com/thread.jspa?threadID=433863
EZ Jim's FAQ on applications that work with an iSight
http://discussions.apple.com/thread.jspa?messageID=607501򔔍
Another help site on subject http://www.mvldesign.com/videoconferencetutorial.html
4:17 PM Tuesday; May 23, 2006 -
I'm using YouTube Video and Audio Downloader. Sometimes the audio and video files combine automatically, sometimes they don't - remaining as separate " DASH - .m4a and DASH - .mp4 ". It used to be that when this would happen I could open up a "ffmpeg" window which would allow me to "manually" convert them to a combined .mp4 file. It was a "drag and drop" type of interface. For some reason I can no longer access that ffmpeg combining function. I tried clicking on ffmpeg.exe. I tried re-downloading ffmpeg several times, both from the Downloader options tab and from the ffmpeg website.
Thanks for your help.Sounds like a question for the developer of the video download add-ons that you have installed.
-
Separate audio from video - I want BOTH an audio and video file
Hi,
I would like to separate audio from video - I want BOTH an audio and video file.
I don't think this can be done without additional software, but if it can, pointing me in the right direction would be much appreciated.
BrandonYou need Quicktime 7.6 Pro. Control+J to bring up the property window. In the property window is an extract button. Click on either the video or audio and click to the extract button.
You'll find Quicktime 7 in your Utilities folder. If Quicktime 7 isn't install in the Utilities folder you need to install it from you OS installation disk, in the optional installations folder.
If you don't have Quicktime Pro you need to buy it from the Apple store. -
I am using a Dell inspiron 14z, with Windows 8, and before that a Dell with Windows XP. This is also happening on my iPad. For the last four months, none of the movies or television shows I have rented or purchased from iTunes have played properly. The audio and video are out of sync. I have tried the troubleshooting measures iTunes suggested, however nothing seems to work. I have read on the community that this has been a problem for users in the past, and have attempted to try some of the fixes individual users have suggested also. Again, nothing seems to work. At this point I am frustrated, as we purchase or rent almost exclusively from iTunes. I would appreciate a support-staff person response. Thank you so much.
this problem has been going on for windows users for over a year now.
Apple has no solution to this problem. -
How to stream audio and video captured from mic and webcam in sync.
I am working on a video chat project. I need to capture audio and video from mic and webcam and create rtp stream for them. How can I proceed for this. Any source code help will be highly appreciated. Otherwise just guide me how to do this and point to any good resource which is directly related to my need.
Thanx.t.b.m
As mentioned by you, i am doing exactly like that . I have coded transmitter class. But at the receiver side it is unable to play the stream. I am posting my code . Can you please help with me with any mistake i m making in my code ?? Or with way I should receive stream at receiver side. Plz see my code. I am streaming to ip address 172.31.80.67.
package heyram;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.media.control.*;
import javax.media.protocol.*;
import javax.media.format.*;
import java.io.IOException;
import java.util.Vector;
import java.net.InetAddress;
import java.awt.*;
import java.io.*;
import java.net.InetAddress;
import javax.media.*;
import javax.media.protocol.*;
import javax.media.protocol.DataSource;
import javax.media.format.*;
import javax.media.control.TrackControl;
import javax.media.control.QualityControl;
import javax.media.rtp.*;
import javax.media.rtp.rtcp.*;
import com.sun.media.rtp.*;
import java.lang.Thread.*;
public class HEYRAM{
Format[] format=new Format[2];
Vector[] devices=new Vector[2];
CaptureDeviceInfo[] di=new CaptureDeviceInfo[2];
SessionManager rtpsm = new com.sun.media.rtp.RTPSessionMgr();
Processor p=null;
Processor p1=null;
boolean result;
public HEYRAM(String address,int port,int ttl){
try{
InetAddress destaddr = InetAddress.getByName(address);
SessionAddress sessaddr = new SessionAddress(destaddr,
port,
destaddr,
port + 1);
String cname = rtpsm.generateCNAME();
String username = null;
try {
username = System.getProperty("user.name");
} catch (SecurityException e){
username = "jmf-user";
// create our local Session Address
SessionAddress localaddr = new SessionAddress();
SourceDescription[] userdesclist= new SourceDescription[]
new SourceDescription(SourceDescription
.SOURCE_DESC_EMAIL,
"[email protected]",
1,
false),
new SourceDescription(SourceDescription
.SOURCE_DESC_CNAME,
cname,
1,
false),
new SourceDescription(SourceDescription
.SOURCE_DESC_TOOL,
"JMF RTP Player v2.0",
1,
false)
rtpsm.initSession(localaddr,
userdesclist,
0.05,
0.25);
rtpsm.startSession(sessaddr,ttl,null);
} catch (Exception e) {
System.err.println(e.getMessage());
//return null;
// rtpsm.initSession(localAddress, defaultUserDesc, rtcp_bw_fraction, rtcp_sender_bw_fraction);
// rtpsm.startSession(...);
public void createVideoSession()
format[1] = new VideoFormat(VideoFormat.YUV);
devices[1]= CaptureDeviceManager.getDeviceList( format[1]);
di[1]= null;
if (devices[1].size() > 0) {
di[1] = (CaptureDeviceInfo)devices[1].elementAt(0);
System.out.println(di[1].toString());
else {
// exit if we could not find the relevant capture device.
System.out.println("1234jjfjsajfjasf1");
System.exit(-1);
// Create a processor for this capture device & exit if we
// cannot create it
try {
p1 = Manager.createProcessor(di[1].getLocator());
} catch (IOException e) {
System.out.println("1234jjfjsajfjasf2");
System.exit(-1);
} catch (NoProcessorException e) {
System.out.println("1234jjfjsajfjasf3");
System.exit(-1);
// at this point, we have succesfully created the processor.
// Realize it and block until it is configured.
// p1.configure();
result = waitForState(p1, Processor.Configured);
if (result == false)
System.out.println("Couldn't realize processor");
p1.setContentDescriptor(new ContentDescriptor( ContentDescriptor.RAW_RTP));
// block until it has been configured
TrackControl track[] = p1.getTrackControls();
boolean encodingOk = false;
// Go through the tracks and try to program one of them to
// output ULAW_RTP data.
for (int i = 0; i < track.length; i++) {
if (!encodingOk && track[i] instanceof FormatControl) {
if (((FormatControl)track).
setFormat( new VideoFormat(VideoFormat.YUV)) == null) {
track[i].setEnabled(false);
else {
encodingOk = true;
else {
// we could not set this track to gsm, so disable it
track[i].setEnabled(false);
// Realize it and block until it is realized.
p1.realize();
result = waitForState(p1, Processor.Realized);
if (result == false)
System.out.println("Couldn't realize processor");
// block until realized.
// get the output datasource of the processor and exit
// if we fail
DataSource ds = null;
try {
ds = p1.getDataOutput();
} catch (NotRealizedError e){
//System.exit(-1);
System.out.println("1234jjfjsajfjasf4");
// Create a SessionManager and hand over the
// datasource for SendStream creation.
// The session manager then needs to be initialized and started:
// rtpsm.initSession(...);
// rtpsm.startSession(...);
try {
(rtpsm.createSendStream(ds, 0)).start();
} catch (IOException e){
System.out.println("1234jjfjsajfjasf6");
e.printStackTrace();
} catch( UnsupportedFormatException e) {
System.out.println("1234jjfjsajfjasf7");
e.printStackTrace();
public void createAudioSession(){
format[0] = new AudioFormat("linear",8000,8,1);
devices[0]= CaptureDeviceManager.getDeviceList( format[0]); -
Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Audio and video out of sync after capture from Canon
Help for a newbie please? I have a Canon XHA1S and have a problem after capturing HD video. After capturing a 40 minute clip, the audio and video are out of sync. Seems like there is about a 3 second difference. The entire clip is like that in the source window; I made a couple of quick edits and have the same problem in the program window. Tried exiting and re-opening PP, but that didn't help. I'm running PP in CS6 on an iMac 3.4 GHz i7 with 8G of ram. Thanks!
I have NOT used it, but many say to try this for HDV capture http://strony.aster.pl/paviko/hdvsplit.htm
Maybe you are looking for
-
Is it possible to view VIs remotely on windows 7 if VI was built with LabView 8.2?
So I know i'm probably dealing with software compatibility issues here, BUT, I wanted to make sure every option was exhausted before considering the idea of upgrades. Im using LabView full development system 8.2 on windows XP 32bit os. Currently,
-
Can I use a SCSI hard drive in a SCSI CD-ROM enclosure?
I have an external SCSI hard drive which has stopped working. It has been going OK for some time, but has suddenly ceased completely, i.e. the light doesn't even come on when I plug it in. I'm guessing from this that it may be the power supply that's
-
How to use IBatis paging in jsp?
I'm a new comer in IBatis.If I query the database using the method "executeQueryForList" how to display the record in jsp (for example 10 record) and display next 10 record? I means how to create page number in jsp for user click? If someone used it
-
Http redirects not changing url in address bar
I'm going crazy trying to fix a major bug in our application. Http redirects are not changing the url in the address bar of the latest versions of internet explorer. But this only happens if the redirected page is an xml page with an xslt reference f
-
Hi Gurus, I am trying to pull BP details on the delivery output. Can anyone tell me the logic and the field name and details to find out the BP no: and address. Regards, Rajesh